Professional Documents
Culture Documents
Liquid Measurement
Experiment Inventory
Materials (1) 50 mL Beaker
PROCEDURE:
17
e. Take the bulb off the pipette, quickly place your finger over the top of the pipette, and
allow the liquid to flow into the beaker by slowly moving your finger away from the top of
the pipette. This should be done cautiously to ensure flow control.
f. Alternatively, you can also keep the bulb on the pipette, and squeeze the bulb to release
6. You can check your work by verifying the remaining water volume in the beaker.
7. Measure 10 mL of water into your 10 mL graduated cylinder; then, transfer the water into your 50
mL beaker.
13. Release 15 mL of the water from the syringe into a tablespoon. Record your observations in Table
3.
14. Refill your 20 mL syringe with tap water and determine how many mL of fluid a tablespoon can
hold.
15. Empty your tablespoon.
16. Using your teaspoon and tap water, determine approximately how many teaspoons of water it
takes to fill a 1 oz. plastic cup. Record your observations in Table 3.
17. Using your tablespoon, determine approximately how many tablespoons of water it takes to fill a 1
oz. plastic cup. Record your observations in Table 3.
18. Pour 2 tablespoons of water back into your 100 mL beaker. Record the water volume in Table 3.
19. Pour water from your beaker into a measuring cup until 1/3 of the cup is full. Record the remaining
**Remember that in a true environment, you task is not completed until all stock medication
and equipment have been cleaned and returned to their proper location in the pharmacy.**
18