Professional Documents
Culture Documents
2022, 17:53 #740254 - Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M - Debian Bug report logs
Package: src:linux
Version: 3.13.4-1
Severity: normal
File: /lib/modules/3.13-1-amd64/kernel/drivers/gpu/drm/nouveau/nouveau.ko
Dear Maintainer,
After upgrading from linux 3.12 to 3.13 nouveau driver stopped working.
Xorg falls back to vesa driver.
Bugreport has made a great job collecting all needed info so there is not
much to say.
I think this is an upstream problem since I have seen the same report
(different laptop, same video hw) on Arch:
https://bbs.archlinux.org/viewtopic.php?pid=1386244
As always, thanks a lot to all Debian maintainers for such a wonderful work!
Greetings.
-- Package-specific info:
** Version:
Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version
4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.13.4-1 (2014-02-22)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=/dev/mapper/vg0-debian0 ro quiet
** Not tainted
** Kernel log:
[ 9.489866] ACPI: Lid Switch [LID0]
[ 9.489915] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 9.489998] ACPI: Power Button [PWRF]
[ 9.602043] wmi: Mapper loaded
[ 9.605164] input: Ideapad extra buttons as
/devices/platform/VPC2004:00/input/input9
[ 9.661200] [drm] Initialized drm 1.1.0 20060810
[ 9.705215] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 9.719691] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id:
0x1e2b1, caps: 0xd00123/0x840300/0x126c00, board id: 2132, fw id: 1180104
[ 9.756099] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input3
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740254 1/13
22.05.2022, 17:53 #740254 - Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M - Debian Bug report logs
[ 9.858557] iTCO_vendor_support: vendor-support=0
[ 9.861513] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 9.861536] iTCO_wdt: Found a Panther Point TCO device (Version=2,
TCOBASE=0x0460)
[ 9.861606] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.865169] usbcore: registered new interface driver btusb
[ 10.018180] usbcore: registered new interface driver ath3k
[ 10.165873] alg: No test for crc32 (crc32-pclmul)
[ 10.220128] MXM: GUID detected in BIOS
[ 10.220139] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type
mismatch - Found [Integer], ACPI requires [Package]
(20131115/nsarguments-95)
[ 10.220164] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 10.220426] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7110a2
[ 10.220428] nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
[ 10.220429] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
[ 10.221526] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for
image...
[ 10.221539] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 10.221540] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 10.221572] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 10.221573] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
[ 10.221574] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 10.221575] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for
image...
[ 10.221643] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 10.221644] nouveau [ VBIOS][0000:01:00.0] using image from PCIROM
[ 10.221725] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 10.221727] nouveau [ VBIOS][0000:01:00.0] version 80.07.27.00.33
[ 10.221928] nouveau E[ VBIOS][0000:01:00.0] 0x83e0[ ]: unknown opcode
0x42
[ 10.221998] nouveau E[ DEVINIT][0000:01:00.0] init failed, -22
[ 10.222067] nouveau E[ DRM] failed to create 0x80000080, -22
[ 10.222344] nouveau: probe of 0000:01:00.0 failed with error -22
[ 10.233086] ath: phy0: Set BT/WLAN RX diversity capability
[ 10.240306] ath: phy0: ASPM enabled: 0x42
[ 10.240307] ath: EEPROM regdomain: 0x65
[ 10.240308] ath: EEPROM indicates we should expect a direct regpair map
[ 10.240310] ath: Country alpha2 being used: 00
[ 10.240310] ath: Regpair used: 0x65
[ 10.316655] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.316841] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90004e80000,
irq=17
[ 10.536463] media: Linux media interface: v0.10
[ 10.552161] Linux video capture interface: v2.00
[ 10.573407] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:58dd)
[ 10.580762] input: Lenovo EasyCamera as
/devices/pci0000:00/0000:00:14.0/usb4/4-1/4-1:1.0/input/input10
[ 10.582347] usbcore: registered new interface driver uvcvideo
[ 10.582348] USB Video Class driver (1.1.1)
[ 10.740201] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 10.876780] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input11
[ 10.877801] intel_rapl: domain uncore energy ctr 0:0 not working, skip
[ 10.880230] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 10.880297] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.880631] hda_intel: Disabling MSI
[ 10.880635] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 11.647778] usbcore: registered new interface driver snd-usb-audio
[ 11.747585] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 11.932177] cfg80211: World regulatory domain updated:
[ 11.932183] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 11.932186] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 11.932188] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 11.932190] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
2000 mBm)
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740254 2/13
22.05.2022, 17:53 #740254 - Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M - Debian Bug report logs
[ 11.932192] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A,
2000 mBm)
[ 11.932193] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 mBm)
[ 11.932195] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm)
[ 14.740395] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 14.927806] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 15.126729] Adding 15622140k swap on /dev/mapper/vg0-swap0. Priority:-1
extents:1 across:15622140k
[ 15.389096] lp: driver loaded but no devices found
[ 15.407822] ppdev: user-space parallel port driver
[ 15.453379] fuse init (API version 7.22)
[ 16.348028] RPC: Registered named UNIX socket transport module.
[ 16.348032] RPC: Registered udp transport module.
[ 16.348033] RPC: Registered tcp transport module.
[ 16.348034] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.383589] FS-Cache: Loaded
[ 16.406848] FS-Cache: Netfs 'nfs' registered for caching
[ 16.467347] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 16.989793] alx 0000:02:00.0: irq 45 for MSI/MSI-X
[ 16.989926] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.990756] alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full
[ 16.991090] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.869407] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input15
[ 26.984164] Bluetooth: RFCOMM TTY layer initialized
[ 26.984176] Bluetooth: RFCOMM socket layer initialized
[ 26.984182] Bluetooth: RFCOMM ver 1.11
[ 27.114756] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.114760] Bluetooth: BNEP filters: protocol multicast
[ 27.114769] Bluetooth: BNEP socket layer initialized
[ 29.076750] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 32.261814] wlan0: authenticate with a0:f3:c1:8c:16:63
[ 32.285272] wlan0: send auth to a0:f3:c1:8c:16:63 (try 1/3)
[ 32.289104] wlan0: authenticated
[ 32.293018] wlan0: associate with a0:f3:c1:8c:16:63 (try 1/3)
[ 32.296338] wlan0: RX AssocResp from a0:f3:c1:8c:16:63 (capab=0x431
status=0 aid=29)
[ 32.296528] wlan0: associated
[ 32.296538] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
sys_vendor: LENOVO
product_name: 20192
product_version: Lenovo IdeaPad Y400
chassis_vendor: LENOVO
chassis_version: Lenovo IdeaPad Y400
bios_vendor: LENOVO
bios_version: 6BCN34WW(V1.05)
board_vendor: LENOVO
board_name: INVALID
board_version: 31900004WIN8 STD SGL
** Loaded modules:
ctr
ccm
bnep
rfcomm
binfmt_misc
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
fuse
parport_pc
ppdev
lp
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740254 3/13
22.05.2022, 17:53 #740254 - Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M - Debian Bug report logs
parport
x86_pkg_temp_thermal
snd_hda_codec_hdmi
snd_usb_audio
snd_usbmidi_lib
intel_powerclamp
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_hda_codec_realtek
snd_hda_intel
intel_rapl
coretemp
kvm_intel
kvm
snd_hda_codec
snd_hwdep
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
snd_pcm
snd_page_alloc
joydev
arc4
crct10dif_pclmul
ath9k
nouveau
ath9k_common
ath9k_hw
crc32_pclmul
mxm_wmi
snd_seq
ath3k
crc32c_intel
ath
ttm
mac80211
btusb
iTCO_wdt
iTCO_vendor_support
ghash_clmulni_intel
aesni_intel
aes_x86_64
drm_kms_helper
drm
wmi
ideapad_laptop
sparse_keymap
snd_seq_device
snd_timer
snd
jmb38x_ms
lrw
gf128mul
glue_helper
ablk_helper
cryptd
i2c_i801
bluetooth
battery
ac
button
video
psmouse
serio_raw
pcspkr
cfg80211
i2c_algo_bit
i2c_core
processor
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740254 4/13
22.05.2022, 17:53 #740254 - Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M - Debian Bug report logs
lpc_ich
memstick
mei_me
mfd_core
soundcore
mei
rfkill
evdev
ext4
crc16
mbcache
jbd2
dm_mod
sg
sd_mod
sr_mod
crc_t10dif
cdrom
crct10dif_common
ahci
libahci
libata
scsi_mod
xhci_hcd
ehci_pci
sdhci_pci
ehci_hcd
sdhci
mmc_core
alx
mdio
usbcore
usb_common
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM
Controller [8086:0154] (rev 09)
Subsystem: Lenovo Device [17aa:3977]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c2000000-c30fffff
Prefetchable memory behind bridge: 00000000b0000000-00000000c1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740254 5/13
22.05.2022, 17:53 #740254 - Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M - Debian Bug report logs
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at c3400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740254 6/13
22.05.2022, 17:53 #740254 - Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M - Debian Bug report logs
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: c3200000-c32fffff
Prefetchable memory behind bridge: 00000000c3600000-00000000c36fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC
Controller [8086:1e59] (rev 04)
Subsystem: Lenovo Device [17aa:3977]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740254 7/13
22.05.2022, 17:53 #740254 - Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M - Debian Bug report logs
Subsystem: Lenovo Device [17aa:3977]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c3415000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4000 [size=32]
01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller
[10de:0e1b] (rev a1)
Subsystem: Lenovo Device [17aa:3977]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c3000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740254 8/13
22.05.2022, 17:53 #740254 - Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M - Debian Bug report logs
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c3103000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
** USB devices:
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0cf3:3004 Atheros Communications, Inc.
Bus 001 Device 003: ID 046d:0a14 Logitech, Inc.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 0bda:58dd Realtek Semiconductor Corp.
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740254 9/13
22.05.2022, 17:53 #740254 - Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M - Debian Bug report logs
ii firmware-linux-free 3.3
-- debconf information:
linux-image-3.13-1-amd64/prerm/removing-running-kernel-3.13-1-amd64: true
linux-image-3.13-1-amd64/postinst/depmod-error-initrd-3.13-1-amd64: false
--
Jaime Alberto Silva Colorado
http://jaimealsilva.com
I'm sorry, after reading the report I noticed I should elaborate more (I
was in a hurry).
I am running Debian sid for AMD64 on a Lenovo IdeaPad Y400 laptop (details
can be seen on "Model information" section of last message). Video card is:
Full data from lspci is on last post. That is the only video card, I have
seen most laptops with that model also have an Intel board for use with all
that bumblebee + primus + bbswitch stuff, but this seems to be a stand
alone hw config.
...
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740254 10/13
22.05.2022, 17:53 #740254 - Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M - Debian Bug report logs
Then console mode is not changed and when KDM starts Xorg says nouveau
driver can not be started and fails back to (i assume) vesafb:
...
[ 44.824] (II) NOUVEAU driver Date: Thu Nov 7 14:56:48 2013 +1000
[ 44.824] (II) NOUVEAU driver for NVIDIA chipset families :
[ 44.824] RIVA TNT (NV04)
[ 44.824] RIVA TNT2 (NV05)
[ 44.824] GeForce 256 (NV10)
[ 44.824] GeForce 2 (NV11, NV15)
[ 44.824] GeForce 4MX (NV17, NV18)
[ 44.824] GeForce 3 (NV20)
[ 44.824] GeForce 4Ti (NV25, NV28)
[ 44.824] GeForce FX (NV3x)
[ 44.824] GeForce 6 (NV4x)
[ 44.824] GeForce 7 (G7x)
[ 44.824] GeForce 8 (G8x)
[ 44.824] GeForce GTX 200 (NVA0)
[ 44.824] GeForce GTX 400 (NVC0)
[ 44.824] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 44.824] (II) FBDEV: driver for framebuffer: fbdev
[ 44.824] (II) VESA: driver for VESA chipsets: vesa
[ 44.824] (++) using VT number 7
Thanks.
--
Jaime Alberto Silva Colorado
<http://www.sgautomatizacion.com>http://jaimealsilva.com
Same problem with the failed creation and probing of nouveau occurs with linux
3.14~rc7-1~exp1.
Regards,
Markus
Hello.
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740254 11/13
22.05.2022, 17:53 #740254 - Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M - Debian Bug report logs
on dmesg but after returning to linux 3.12 I noticed the same report there.
Thanks.
Changed Bug title to 'Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M' from '/lib/modules/3.13-1-
amd64/kernel/drivers/gpu/drm/nouveau/nouveau.ko: Not working for GK107M NVE7 Kepler GEFORCE GT 650M' Request was from Jaime Silva
<jaimealbertosilva@gmail.com> to control@bugs.debian.org. (Mon, 05 May 2014 20:15:08 GMT) (full text, mbox, link).
Severity set to 'important' from 'normal' Request was from Jaime Silva <jaimealbertosilva@gmail.com> to control@bugs.debian.org. (Mon, 05 May
2014 20:15:09 GMT) (full text, mbox, link).
Marked as found in versions linux/3.14.2-1. Request was from Jaime Silva <jaimealbertosilva@gmail.com> to control@bugs.debian.org. (Mon, 05
May 2014 20:36:07 GMT) (full text, mbox, link).
Bug archived. Request was from Debbugs Internal Request <owner@bugs.debian.org> to internal_control@bugs.debian.org. (Thu, 27 May 2021
07:30:38 GMT) (full text, mbox, link).
Debian bug tracking system administrator <owner@bugs.debian.org>. Last modified: Sun May 22 14:52:20 2022; Machine Name:
buxtehude
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740254 12/13
22.05.2022, 17:53 #740254 - Nouveau not working for GK107M NVE7 Kepler GEFORCE GT 650M - Debian Bug report logs
Debbugs is free software and licensed under the terms of the GNU Public License version 2. The current version can be obtained from
https://bugs.debian.org/debbugs-source/.
Copyright © 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson, 2005-2017 Don Armstrong, and many other
contributors.
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740254 13/13