Professional Documents
Culture Documents
75
Engine Room Equipment
Spin-On Series Fuel Filter / Water Separators
Racor filters are known all over the world for their reliability and efficiency in water
separation, thanks to the exceptional capabilities of the Aquabloc® II paper media,
available in 2, 10 and 30 micron.
D ies el Ap p l i c a t i o ns
Engine Room Equipment
RA245
Ref - Plastic see-through bowl RA120 RA230 RA245
Gasoline Ap p l i c a t i o ns
H R e p la c e m e n t Fu e l Fi l te r E l e me n ts
Ref: RS251 250µ for RA001 (S2501)
Ref: RS252 10µ for RA002 (S2502)
Ref: RR112 10µ for RA110 (R11T)
Ref - Plastic see-through bowl RA001 RA002 RA121 RA321 RA661 Ref: RR122 10µ for RA120 (R12T)
Ref: RR120 30µ for RA120 (R12P)
Ref - Metal bowl RA322 RA662 Ref: RS240 10µ for RA121 (S3240)
Flow 95L/h 95L/h 140L/h 227L/h 340L/h Ref: RR202 10µ for RA230 (R20T)
Filter element RS251 RS252 RS240 RS227 / RS228 RS232 / RS233 Ref: RR200 30µ for RA230 (R20P)
Ref: RR250 30µ for RA245 (R25P)
Filtration 250µ 10µ 10µ 10µ 10µ
Ref: RR258 10µ UL for RA248 (R25TUL)
Port size 1/4-18NPT 1/4-18NPT 1/4-18NPT 1/4-18NPT 3/8-18NPT Ref: RS227 10µ for RA321 (S3227)
Dimensions HxWxD 109x57mm 109x57mm 165x81mm 222x102mm 264x106mm Ref: RS228 10µ UL for RA322 (S3228UL)
Weight 0.14kg 0.14kg 0.5kg 0.9kg 1.4kg Ref: RS232 10µ for RA661 (S3232)
RA332 and RA662 are compliant with ISO 10088 standards. Ref: RS233 10µ UL for RA662 (S3232RUL)
RA500 RA502
RA901
500 Series Single 900 Series 1000 Series 500 Series 900 Series 1000 Series 1000 Series 1000 Series
filter Single filter Single filter Dual Filter Dual Filter Dual Filter Dual Filter Triple Filter
Ref - Plastic see- RA500 RA900 RA100 RA755 RA759 RA731 RA751 RA791
Ref - Metal bowl RA502 RA902 RA102 RA757 RA760 RA732 RA752 RA792
Ref - Heat deflector RA501 RA901 RA101 RA756 RA761 - RA753 -
Flow 227l/h 341l/h 681l/h 227/454l/h 340/681l/h 1360l/h 680/1360l/h 680/1360/2044l/h
Two Filters Two Filters Two Filters Three Filters
Two Filters
Configuration One Filter One Filter One Filter Permutable Permutable Permutable Permutable
Parallel operation
operation operation operation operation
3/4”16UNF 7/8”-14UNF 7/8”-14UNF 3/4”-16UNF 7/8”-14JIC 3/4”-14 NPT 7/8”-14JIC 3/4”-14 NPT
Port size
Female Female Female Female Male Male Male Male
Dimensions H x l x P 292x147x122mm 432x152x178mm 559x152x178mm 292x368x241mm 432x476x279mm 559x419x305mm 559x476x279mm 559x546x300mm
Dimensions HxWxD 1.8kg 2.7kg 4.5kg 7.7kg 10.4kg 11.8kg 13.8kg 23.6kg
Weight
Replacement Element RA210 RA240 RA220 RA210 RA240 RA220 RA220 RA220
Red - 30µ RA212 RA242 RA222 RA212 RA242 RA222 RA222 RA222
Blue - 10µ RA211 RA241 RA221 RA211 RA241 RA221 RA221 RA221
Brown - 2µ RA018 RA019 RA019 RA018 RA019 RA019 RA019 RA019
Dimensions and weight are those of see-through bowl references
Model Flow* Dimensions (HxWxD) Port size Number of units Max working pressure Weight
806 1363L/h 610x226x226mm 1” 1 2 bar 11 kg
812 2725L/h 855x226x229mm 1” 1 2 bar 16 kg
75/812 5450L/h 855x476x394mm 1” 2 2 bar 40 kg
79/812 8175L/h 855x762x394mm 1”1/4 3 2 bar 60 kg
* Max flow and Max working pressure will vary according to fluid properties.
FBO-10 FBO-14
Model Max flow diesel* Max flow gasoline Dimensions (HxWxD) Port size Max working pressure Weight
FBO-10-MA 478x165x155mm 1”1/2 NPT 10 bar 17 kg
Microfilter 2280L/h 11940L/h
Filter Separator 2268L/h 7140L/h
FBO-14-MA 580x165x155mm 1”1/2 NPT 10 bar 18.5 kg
Microfilter 5700L/h 17040L/h
Filter Separator 3420L/h 10200L/h
* Working pressure will vary according to fluid properties.
Filtered crankcase gasses are redirected into the engine intake system and the oil returns
into the oil pan.
Closed System
Clean Crankcase Gasses
to Air Intake
Pressure Regula-
ting Valve
CCV Unit
L P
Light and Audio Alarm Ref: RA004 Light and Audio Alarm
Ref: RA005 12 V kit 1/2” – 20 UNF Ref: RA009 12/24 V kit
Ref: RA006 24 V kit Replacement transmitter Cut-out diameter: 2” (51mm).
Dim.: H36 x L32 x W36mm. Overall diameter: 56mm.
Depth: 81mm.
Alarm Kit
Ref: HC004 12/24 V kit
The transmitter (1/2” – 20 UNF) is fitted with a built-in amplifier providing a
ground output (max load: 1A).
Typical application: actions on water detection.
110 V DC and 110 V AC kits available on request.
1- LED
2- 2.5m power wire
3- Transmitter
4- Transmitter harness w/ connector
B B
Pa
ck Quantity
Diesel Delivery Hose Diesel Delivery Hose, ISO 7840 A1 T-Bolt Clamps – W4
Black rubber hose designed for oil and diesel. Black smooth rubber hose. Smooth outside shield.
Go to “Pump and Water Systems”,
Reinforcement: textile. Reinforcement: textile. page 43 to view the full range.
Temperature range: -20° to +70°C (except TG006). Temperature range: -20° to +70°C.
Working pressure: 10 bar. Working pressure: 10 bar. Additional steel helix on
38mm & 50 mm diameter hoses.
Aluminum Deck Fills
Ref ID OD Bend radius Qty Ref ID OD Bend radius Qty Ref: NP002 50mm, fuel
Ref: NP003 38mm, fuel
A TG006 6mm 13mm 48mm 20m A TU008 8mm 16mm 40mm 20m Ref: NP022 Red plug
A TG008 8mm 15mm 65mm 20m A TU010 10mm 18mm 50mm 20m w/ chain, fuel
A TG010 10mm 17mm 80mm 25m A TU013 12mm 21mm 65mm 10m
Ref: NP011 Chrome Plated
A TG013 13mm 20mm 105mm 25m A TU016 16mm 25mm 75mm 10m Bronze Deck Fills w/ Locking Key
A TG015 15mm 23mm 120mm 25m A TU019 19mm 29mm 100mm 10m Diameter: 50mm – Overall
diameter: 84mm.
A TG019 19mm 27mm 150mm 10m B TU038 38mm 50mm 450mm 5m
B TG038 38mm 52mm 460mm 5m B TU050 50mm 62mm 600mm 5m Ref: NP013 Chrome Plated
51mm 64mm 610mm 5m
Bronze Deck Fills
B TG051
Diameter: 50mm
Funnel
Suitable for 40mm, 45mm or 50mm ID Hose. Suitable for 50mm, 60mm, 75mm or 90mm ID Hose.
Drain cock for winter storage. Drain cock for winter storage.
Top outlet connection rotates 360° to make installation simpler. Dim. (WxLxH): 530 x 138 x 290mm.
Dim. (WxLxH): 372 x 110 x 221mm. Capacity: 10.5 L.
Capacity: 4.25 L. Ref: EC751 50mm ID hose (long exhaust line)
Ref: EC740 40mm ID hose Ref: EC760 60mm ID hose
Ref: EC745 45mm ID hose Ref: EC775 75mm ID hose
Ref: EC750 50mm ID hose (short exhaust line) Ref: EC790 90mm ID hose (the installation of a mixer Ref: MX090 is recommended)
A
A B
Suitable for 40mm, 45mm, 50mm, A Suitable for 40mm, 45mm, 50mm
Ref: EC540 40mm ID hose
60mm, 75mm or 90mm ID Hose. or 60mm ID Hose.
A Ref: EC545 45mm ID hose Goose Necks prevent seawater from
Mufflers create additional mixing of A Ref: EC550 50mm ID hose entering the engine via the transom
water in exhaust line, improving noise A connection. They offer a space
Ref: EC560 60mm ID hose
reduction with almost no resistance saving solution compared to self-
B Ref: EC575* 75mm ID hose
to the free flow of exhaust gasses. made hose loops
B Ref: EC590* 90mm ID hose
* W 456mm x L 180mm x H 130mm A Ref: EC240 40mm ID hose, A Ref: EC260 60mm ID hose,
inlet/outlet inlet/outlet
E A ccessories A Ref: EC245 45mm ID hose, B Ref: EC275 75mm ID hose,
inlet/outlet inlet/outlet
Wet Exhaust Gas/Water Mixer
A Ref: EC250 50mm ID hose, B Ref: EC290 90mm ID hose,
The installation of a mixer is highly recommended for
90mm diameter exhaust lines and above. inlet/outlet inlet/outlet
It should be placed on the inlet of the waterlock or muffler.
Ref: MX090 Diameter: 90mm
Air Vents
Suitable for 13mm, 19mm, 25mm and 32mm ID hose
Prevent cooling water from being siphoned into the
engine when it is stopped, if cooling water intake is near
or below the waterline.
Ref: EC201 Air Vent without Valve
Vented anti-siphon supplied with skin fitting, 4m hose and
hose clamps.
Ref: EC202 Air Vent with Built-in Valve
A B C
90° Elbows – Max Temperature: 120°C. 45° Elbows – Max Temperature: 120°C.
Ref. ID A B C D R W Ref. ID A B C R W
TR290 50 114 140 50 45 50 5 TR345 76 38 38 140 50 6
TR259 65 108 108 45 45 50 5 TR354 90 38 38 140 50 6
TR390 76 133 133 45 38 50 6 TR445 102 38 38 140 50 6
TR359 90 140 140 45 38 50 6 TR454 114 38 38 140 45 6
TR490 102 146 146 45 38 50 6 TR545 127 41 41 133 45 6
TR459 114 152 152 45 38 45 6 TR645 152 50 50 165 45 6
TR590 127 152 152 45 41 45 6 TR845 203 57 57 203 54 9,5
TR690 152 178 177 57 50 45 6
TR890 203 216 216 50 57 54 9,5
TR109 254 267 267 57 57 79 9,5
Hose
Ref. Diameter Length Hose Clamp Ref Ref. ID A B C W
Clamp Ref
MA020 50mm 101,6mm CI004 HH300 76 133 114 50 6 CI009
MA025 65mm 101,6mm CI007 HH350 90 133 127 50 6 CI011
MA030 76mm 101,6mm CI009 HH353 90/76 133 127 53 6
MA035 90mm 101,6mm CI011 HH400 102 133 136 50 6 CI013
MA040 102mm 152,4mm CI013 HH450 114 133 150 44 6 CI014
MA050 127mm 152,4mm CI015 HH500 127 152 156 57 6 CI015
MA060 152mm 152,4mm CI017 HH600 152 178 190 70 6 CI018
MA080 203mm 203,2mm CI018 HH650 152/127 152 190 47,5 6
MA100 254mm 203,2mm CI022 HH800 203 127 241 38 6 CI022
HH860 203/152 152 241 35 6
EX016 EX024
1000
100
H (mwc)
10
1
10 100 1000 10000
Q (m3/h)
ELL Series
ELL/R
ELL215
ELL/R Series
TILMO
Reference a d i b f Weight
GV120 215mm 200mm 275mm 250mm 210mm 10kg
GV060/061 270mm 75mm - - 270mm 6kg
GV083 355mm 130mm 420mm 395mm 255mm 10kg
GV091 400mm 130mm 465mm 438mm 280mm 11,5kg
GV101 500mm 236mm 567mm 541mm 315mm 21kg
GV105/106/107 560mm 236mm 639mm 605mm 315mm 23,5kg
1000
100
H (mmH2O)
10
1
1 10 100 1000
Q (m3/min)
Reference Type Model Voltage Power RPM Flow rate Inlet dia. Outlet dia.
GV006 LG C202 230 V 0.07 kW 2800 270 m3/h @ 18 mm WC 100mm 78mm
GV007 LG C202 12 V 0.07 kW 2800 270 m3/h @ 18 mm WC 100mm 78mm
GV003 RD C202 24 V 0.07 kW 2800 270 m3/h @ 18 mm WC 100mm 78mm
GV004 LG C202 24 V 0.07 kW 2800 270 m3/h @ 18 mm WC 100mm 78mm
GV005 RD C302 230 V 0.09 kW 2800 270 m3/h @ 18 mm WC 100mm 78mm
GV011 RD C302 24 V 0.11 kW 2500 540 m3/h @ 25 mm WC 130mm 78mm
GV012 LG C302 24 V 0.11 kW 2500 540 m3/h @ 25 mm WC 130mm 78mm
GV017 RD C402 12 V 0.11 kW 2000 840 m3/h @ 25 mm WC 130mm 98mm
GV018 LG C402 12 V 0.11 kW 2000 840 m3/h @ 25 mm WC 130mm 98mm
GV019 RD C402 24 V 0.11 kW 2000 840 m3/h @ 25 mm WC 130mm 98mm
GV020 LG C402 24 V 0.11 kW 2000 840 m3/h @ 25 mm WC 130mm 98mm
GV022 LG C402 230 V 0.24 kW 2800 900 m3/h @ 51 mm WC 130mm 98mm
GV023 RD C402 230 V 0.24 kW 2800 900 m3/h @ 51 mm WC 130mm 98mm
GV028 RD C503 12 V 0.3 kW 2700 1440 m3/h @ 50 mm WC 158mm 90mm
GV029 LG C503 12 V 0.3 kW 2700 1440 m3/h @ 50 mm WC 158mm 90mm
GV031 RD C503 24 V 0.3 kW 2700 1440 m3/h @ 50 mm WC 158mm 118mm
GV030 LG C503 24 V 0.3 kW 2700 1440 m3/h @ 50 mm WC 158mm 118mm
GV033 RD C20 24 V 0.26 kW 1500 1200 m3/h @ 30 mm WC 200mm 160mm
GV034 LG C20 24 V 0.26 kW 1500 1200 m3/h @ 30 mm WC 200mm 160mm
GV041 RD C20/3 12 V 0.55 kW 2000 2220 m3/h @ 37 mm WC 200mm 160mm
GV042 LG C20/3 12 V 0.55 kW 2000 2220 m3/h @ 37 mm WC 200mm 160mm
Other voltages available upon request.
Cabinet Fans
Continuous duty, excellent resistance to temperature, long life expectancy.
Ref VK081 12 V 1.7 W, flow rate: 60 m3/h, 80x80x25mm Ref VK171 12 V 14.4 W
Ref VK082 24 V 1.9 W, flow rate: 65 m3/h, 80x80x25mm Ref VK172 24 V 14.4 W
Ref VK121 12 V 5 W, flow rate: 180 m3/h, 119x119x38mm Flow rate: 384 m3/h, diameter: 172mm.
Ref VK122 24 V 5 W, flow rate: 180 m3/h, 119x119x38mm
E A ccessories E A c c e s s o r ie s
Ref: VK089 80x80mm Grille Ref: VK179 Grille
Ref: VK129 119x119mm Grille
x10 x10
Pa Pa
ck Quantity ck Quantity
ABS Air Grilles ABS Air Grilles ABS Air Grille
Dimensions: 94x94mm Dimensions: 201x101mm Dimensions: 261x125mm
Ref: PB732 black Ref: PB739 black Ref: PB274 black
Ref: PB326 white Ref: PB273 white
x5
Pa
ck Quantity
x5 x5 x5
Pa Pa Pa
ck Quantity ck Quantity ck Quantity
316 Stainless Steel Grilles 316 Stainless Steel Grilles 316 Stainless Steel Grilles 316 Stainless Steel Grilles
Ref: PB380 65x127mm Ref: PB390 115x127mm Ref: PB400 115x230mm Ref: PB410 232x127mm
x10 x10
Pa Pa
ck Quantity ck Quantity
x5
x10 Pa
Pa ck Quantity
ck Quan tity
Grilles with Joiner Adjustable Round Ducting Cover Stainless Steel Clam Shell Vents
For 76mm duct. Dimensions: 92x92mm. Ref: PB450 127mm Ref: PB360 40x44mm, opening: 20mm
Ref: PB275 Black Ref: PB370 55x55mm, opening: 32mm
Ref: PB325 White
For 102mm duct. Dimensions: 127x127mm.
Ref. PB330 White
10
12 A/F Hexagon
M16 x 1.5
Stainless Steel
Oil Cap
145
12,7
5/8 UNF
87
117 76
206
57 60
43 175
12
102
18
130
12 4
Circular Compression Mountings Small Shear Loaded Mountings Replacement Mountings for Yanmar Engines
Mount pre-loaded: 1.5mm – Max. deflection: 2.3mm. Mount pre-loaded: 1.8mm - Max. deflection: 3.4mm. Mount pre-loaded: 2.3mm - Max. deflection: 8.5mm.
Ref: DB003 Min. 45 kg – Max. 82 kg Ref: DB038 Min. 14 kg – Max. 41 kg Ref: DB070 Min. 18 kg – Max. 60 kg
Ref: DB004 Min. 72 kg – Max. 168 kg Ref: DB039 Min. 32 kg – Max. 77 kg Direct replacement for Yanmar Y 75
Ref: DB005 Min. 145 kg – Max. 227 kg Ref: DB071 Min. 23 kg – Max 73 kg
Direct replacement for Yanmar Y 100
Ref: DB072 Min. 28 kg – Max. 109 kg
Direct replacement for Yanmar Y 150
Ref: DB073 Min. 32 kg – Max. 146 kg
Direct replacement for Yanmar Y 200
5/8 UNF ou
5/8 UNF 12,7 C* 3/4 UNF C*
12,7
122
122
A A
B B 62
62
79
63,5 63,5
80 X X
101 125 - 130
127 152
Shear Loaded Mountings w/ Oil Shield Shear Loaded Mountings w/ Oil Shield
Mount pre-loaded: 2.3mm - Max. deflection: 5.3mm. Hole distance (CTC): 127mm.
Ref: DB010 Min. 36 kg – Max. 104 kg Mount pre-loaded: 2.3mm - Max. deflection: 5.3mm. Stiff on direction C*.
Ref: DB011 Min. 54 kg – Max. 186 kg Models w/ a 5/8 UNF Stud:
Ref: DB012 Min. 113 kg – Max. 254 kg Ref: DB024 Min. 36 kg – Max. 105 kg
Ref: DB014 Min. 136 kg – Max. 308 kg Ref: DB025 Min. 54 kg – Max. 187 kg
Stiff on direction C*. Ref: DB026 Min. 113 kg – Max. 255 kg
Ref: DB027 Min. 136 kg – Max. 309 kg
Model w/ a 3/4 UNF Stud:
Ref: DB029 Min. 54 kg – Max. 187 kg
12,7
3/4 UNF 187
102
101
86
140
175
Double Acting Shear Loaded Mountings Heavy Duty Circular Shear Mountings
2 rubber elements pre-loaded against each other. Mount pre-loaded: 3.04mm – Max. deflection: 6.35mm.
Mount pre-loaded: 4.8mm – Max. deflection: 7.6mm. Ref: DB015 Min. 227 kg – Max. 544 kg
Ref: DB034 Min. 72.6 kg – Max. 304 kg Ref: DB016 Min. 295 kg – Max. 680 kg
Model w/ a 3/4 UNF Stud: Ref: DB017 Min. 399 kg – Max. 907 kg
Ref: DB042 Min. 72.6 kg – Max. 304 kg
12,7 C*
5/8 UNF
136
85
79
X 60
101
127
Borg Warner
71, 72, 73, 5000 26 (a) 26 teeth 20/40 DP 34.4
1000, 1500 22 (a) 22 teeth PA 30 18.5
500 10 (a) 10 teeth B10x23x29 DIN 5464 29.0
7000 10 (d) SAE 1-1/2’’ x 10 teeth 38.1
Newage PRM
Delta 17 (a) 17 teeth 24/48 DP 19.7
80, 120, 150 10 (a) 10 teeth B10x23x29 DIN 5464 29.0
100, 101, 140, 160, 260 10 (b) SAE 1"x10 teeth 25.4
175, 250, 265, 310 10 (c) SAE 1-1/8"x10 teeth 28.6
301, 302, 401, 402, 500, 750 17 (b) 17 teeth 16/32 DP 28.84
In-Line 301, 302, 401, 402, 750 26 (a) 26 teeth 20/40 DP 34.4
601, 1000 18 (a) 18 teeth 12/24 DP 40.5
1200, 1500 20 (a) 20 teeth 12/24 DP 44.8
Paragon
P Series 26 (a) 26 teeth 20/40 DP 34.4
Self Change Gear
MRF 350HD 32 (a) 32 teeth 16/32 DP 52.3
MRF 350 10 (e) SAE 1-5/8’’x10 teeth 41.3
Technodrive
TCM 30, 40, 50, 60 10 (a) 10 teeth B10x23x29 DIN 5464 29.0
TMP
1200, 1500 26 (a) 26 teeth 20/40 DP 34.4
Example : 6 x 8.1 on 200
Twin Disc
502, 501 26 (a) 26 teeth 20/40 DP 34.4
Number Pitch hole
Hole dia. circle (mm) Volvo
of holes
(mm) MS3, 4, 5, HS1 26 (a) 26 teeth 20/40 DP 34.4
ZF – Hurth
HBW 35, 40, 50, 100, 125, 150, HSW 125 10 (a) 10 teeth B10x23x29 DIN 5464 29.0
HSW 450, 630, 800 26 (a) 26 teeth 20/40 DP 34.4
HBW 250, 360 26 (a) 26 teeth 20/40 DP 34.4
IRM 220A 26 (a) 26 teeth 20/40 DP 34.4
Back Plate n° 1 and n°8 Back Plate n° 17 and Back Plate n°36 and Back Plate n°97
Diameter: 298.5 n° 91 n°37 Diameter: 381
6 x 8.1 on 200 Diameter: 314.2 Diameter: 266.7 12 x 9.5 on 342.90
6 x 8.1 on 250 6 x 8.1 on 200 12 x 8.1 on 222.3 8 x 9.5 on 368.30
6 x 8.1 on 269.9 6 x 8.1 on 250 6 x 8.1 on 244.5 Spaced 28°-72°
6 x 8.1 on 273 6 x 8.1 on 269.9 Spaced in 3 groups
6 x 8.1 on 273 of 2 apart (23°59`07) Back Plate A
Back Plate n°3 8 x 10.6 on 296 12 x 8.1 on 246 Diameter: 336.5
Diameter: 336.5 12 x 8.1 on 242 6 x 8.2 on 263.6
6 x 8.1 on 200 Back Plate n° 18 6 x 8.2 on 269.8
6 x 8.1 on 210 Diameter: 252.5 Back Plate n°65 6 x 8.2 on 276.2
6 x 8.1 on 263 6 x 8.1 on 222.2 Diameter: 366.2 6 x 8.2 on 289
6 x 8.1 on 269.9 6 x 8.1 on 234 6 x 8.1 on 200.0 6 x 9.8 on 295.2
6 x 8.1 on 276.3 6 x 8.1 on 235 6 x 8.1 on 210.01 6 x 8.2 on 295.2
6 x 8.1 on 289 Spaced 36°- 84° 6 x 8.1 on 263.53 6 x 9.8 on 320.6
6 x 8.1 on 295.3 6 x 8.1 on 238.1 6 x 8.1 on 269.88
6 x 8.8 on 304.8 6 x 8.1 on 276.23 Back Plate C
6 x 8.1 on 314.4 Back Plate n° 25 6 x 8.1 on 288.93 (triangular)
6 x 8.1 on 320.7 Diameter: 287.3 6 x 8.1 on 295.28 Diameter: 338.4
6 x 9.0 on 269.9 6 x 8.74 on 304.8 3 x 8.2 on 263.6
Back Plate n° 2 3 x 6.4 on 269.9 6 x 8.1 on 314.33 3 x 8.2 on 270
Diameter: 362 6 x 9.53 on 320.68 3 x 8.2 on 276.3
6 x 8.1 on 200 3 x 8.2 on 289
6 x 8.1 on 210 Back Plate n°69 3 x 8.2 on 295.4
6 x 8.1 on 263 Diameter: 284 3 x 8.2 on 314.4
6 x 8.1 on 269.9 6 x 9.0 on 269.8 3 x 8.2 on 320.8
6 x 8.1 on 276.3 3 x 6.4 on 269.8
6 x 8.1 on 289
6 x 8.1 on 295.3
6 x 8.8 on 304.8
6 x 8.1 on 314.4
6 x 8.1 on 320.7
12 x 9.5 on 343
G Other references available upon request, up to 190 m.kg – 553mm diameter. Please contact us.
Type 1 – One-stage stiffness flexible element, suitable for most Type 4 – Spring loaded flexible element.
applications in replacement of a spring loaded drive plate.
Type 2 – Two-stage stiffness flexible element to prevent gear Please note that the Damper Drive Plate is only one part of the propulsion
box rattle (gear hammer) at low engine speeds. system. It cannot be hold fully responsible for vibrations and rattle. An
Type 3 – Three-stage stiffness flexible element for an enhanced accurate calculation of torsion vibrations, performed by the engine
constructor, is the key to this kind of problem.
progression on engines with high rpm (3000 rpm and above) and
low torque at low speeds. Left rotation only (facing the element).
Example:
Motor power (P): 120 HP – Rotation speed (n): 2000 rpm
Reduction ratio (R): 2
Power required @ 100 rpm = 12 HP
Max. HP Stern tune dia. No. Hole dia. Pich hole Register
Ref Engine Manufacturer OD Thickness
@ 100 rpm mm (in.) holes - (screw dia.) circle ***
DR014 3 BW, PRM, ZF-Hurth, Technodrive 101.6 (4.00) 114.3 4 10.0 - (M10) 82.55 32.5 63.5 - M/F
DR007 3 Volvo 101.6 (4.00) 114.3 4 10.0 - (M10) 80.0 43.7 60.0 - M/F
DR002 3 Yanmar 101.6 (4.00) 114.3 4 10.0 - (M10) 78.00 32.5 50.0 - M/F
DR001 5 BW, PRM, ZF-Hurth, Technodrive 101.6 (4.00) 114.3 4 10.0 - (M10) 82.55 32.5 63.5 - M/F
DR020 5 Volvo 101.6 (4.00) 114.3 4 10.0 - (M10) 80.0 32.5 60.0 - F/M
DR043 5 Yanmar 101.6 (4.00) 114.3 4 10.0 - (M10) 78.0 32.5 50.0 - M/F
DR005 7 Paragon 101.6 (4.00) 114.3 4 9.7 - (3/8 UNF) 82.55 34.5 66.7 - M/F
DR004 8 BW, PRM, ZF-Hurth 101.6 (4.00) 114.3 4 10.0 - (M10) 82.55 35.6 63.5 - M/F
DR044 8 BW, PRM, ZF-Hurth, Volvo 127.0 (5.00) 143.0 4 11.2 - (7/16 UNF) 107.9 45 63.5 - M/F
DR012 10 Yanmar 127.0 (5.00) 143.0 4 10.0 - (M10) 100.0 45.0 65.0 - M/F
DR009 13 BW, PRM, ZF-Hurth 127.0 (5.00) 143.0 4 11.2 - (7/16 UNF) 107.9 45.0 63.5 - M/F
DR010 * 13 Volvo 127.0 (5.00) 143.0 4 11.2 - (7/16 UNF) 107.9 45.0 63.5 - M/F
DR029 20 BW, ZF-Hurth, Volvo 127.0 (5.00) 143.0 4 11.2 - (7/16 UNF) 107.9 52.4 63.5 - M/F
DR003 ** 20 BW, PRM, ZF-Hurth, Twin Disc 146.0 (5.75) 152.4 6 12.7 - (1/2 UNF) 120.6 47.5 76.2 - M/F
DR006 20 Twin Disc, ZF-Hurth 146.0 (5.75) 152.4 6 16.0 - (1/2 UNF) 120.6 47.5 76.2 - F/M
DR025 ** 28 BW, PRM, ZF-Hurth, Twin Disc 146.0 (5.75) 152.4 6 12.7 - (1/2 UNF) 120.6 49.8 76.2 - M/F
DR026 28 Twin Disc 146.0 (5.75) 152.4 6 16.0 - (1/2 UNF) 120.6 49.8 76.2 - F/M
DR032 ** 37 BW, PRM, ZF-Hurth, Twin Disc 146.0 (5.75) 152.4 6 12.7 - (1/2 UNF) 120.6 55.4 76.2 - M/F
DR033 37 Twin Disc, ZF-Hurth 146.0 (5.75) 152.4 6 16.0 - (1/2 UNF) 120.6 55.4 76.2 - F/M
DR017 40 Twin Disc 184.2 (7.25) 190.5 6 19.0 - (5/8 UNF) 152.4 60.7 95.2 - F/M
DR040 55 PRM 184.2 (7.25) 190.5 6 16.0 - (5/8 UNF) 152.4 63.3 95.2 - M/F
DR022 65 Twin Disc 228.6 (9.0) 222.2 8 12.7 - (1/2 UNF) 190.5 44.5 152.4 - F/M
* DR010 is supplied with 70mm screws, DR009 with 57mm screws.
** TP384: 54mm spacer for DR003, DR025 & DR032 mounting on IRM220A & TP1248 for Twin Disc 502.
*** The register values are for the flexible coupling: gearbox coupling / propeller shaft coupling.
Ref: AH220 22mm, length: 1000mm Ref: AH252 25mm, length: 2000mm Ref: AH400 40mm, length: 1500mm
Ref: AH222 22mm, length: 1250mm Ref: AH300 30mm, length: 1500mm Ref: AH401 40mm, length: 2000mm
Ref: AH225 22mm, length: 1500mm Ref: AH301 30mm, length: 1750mm Ref: AH402 40mm, length: 2500mm
Ref: AH250 25mm, length: 1000mm Ref: AH302 30mm, length: 2000mm Ref: AH451 45mm, length: 1500mm
Ref: AH251 25mm, length: 1250mm Ref: AH303 30mm, length: 2500mm
Other models available on request.
Ref: AH255 25mm, length: 1500mm Ref: AH350 35mm, length: 1500mm
Ref: AH257 25mm, length: 1750mm Ref: AH352 35mm, length: 2000mm
100mm 120mm 130mm 100mm 101,6mm (4”) 127mm (5”) 146mm (6”)
22 mm TP001 TP003 TP006
25 mm TP002 TP004 TP007
30 mm TP027 TP013 TP005 TP008 TP010
35 mm TP014 TP015 TP009 TP011
40 mm TP018 TP016 TP012
45 mm TP017
50 mm TP025
Models up to 7 ¼'' available upon request, metric and imperial bore for shafts up to 70mm.
Reference Flange OD Fixing details Register (mm) Length (mm) Wedging width (mm)
Ref: PE224 For a 22mm shaft & 40mm OD stern tube, w/ 5 rings of 5mm braid
Ref: PE254 For a 25mm shaft & 40mm OD stern tube, w/ 5 rings of 5mm braid
Ref: PE255 For a 25mm shaft & 45mm OD stern tube, w/ 5 rings of 5mm braid
Ref: PE304 For a 30mm shaft & 45mm OD stern tube, w/ 7 rings of 5mm braid
Ref: PE305 For a 30mm shaft & 50mm OD stern tube, w/ 7 rings of 5mm braid
Ref: PE306 For a 30mm shaft & 55mm OD stern tube, w/ 7 rings of 5mm braid
Ref: PE355 For a 35mm shaft & 50mm OD stern tube, w/ 7 rings of 5mm braid
Ref: PE357 For a 35mm shaft & 60mm OD stern tube, w/ 7 rings of 5mm braid
Ref: PE406 For a 40mm shaft & 60mm OD stern tube, w/ 7 rings of 6mm braid
Ref: PE407 For a 40mm shaft & 65mm OD stern tube, w/ 7 rings of 6mm braid
Pa
ck Quantity
Metric Bearings
Metric Inside Diameter / Metric Outside Diameter
C
Shaft Blade Fitting Minimum Overall
Size Ref Cutlass diameter
diameter diameter width (A) Gap (B) Width (C)
Size 1 CO125 25mm 47mm max 80mm
CO225 25mm
Size 2 57mm max 90mm
CO230 30mm Rope
CO330 30mm Cutter
A Tubular Type Senders – Fuel Level A VDO Tubular Type Senders – Fuel Level D VDO Swing Arm Type Senders – Fuel Level
Scale: 90-10 Ω. Voltage: 12 / 24 V. Grounded. Scale: 90-10 Ω. Admissible tank depth: from 150 to 600mm.
Hole distance (CTC): 54mm. Voltage: 12 / 24 V. Separate ground connection. Voltage: 12 / 24 V. Separate ground connection.
Supplied with a nitrile gasket. Hole distance (CTC): 80mm. Hole distance (CTC): 54mm.
Supplied with a nitrile gasket. Supplied with fixing hardware.
Ref: YJ400 150mm Ref: YJ438 340mm Ref: YJ080 536mm Ref: YJ153 10-180 Ω
Ref: YJ402 160mm Ref: YJ440 350mm Ref: YJ082 803mm Ref: YJ156 10-180 Ω + Low Level Alarm
Ref: YJ404 170mm Ref: YJ444 370mm Ref: YJ154 240-33 Ω
Ref: YJ406 180mm Ref: YJ446 380mm B VDO Swing Arm Type Senders – Fuel Level
Ref: YJ410 200mm Ref: YJ450 400mm Ref: YJ150 10-180 Ω E M o u n t in g A c c e s s o ri e s
Ref: YJ414 220mm Ref: YJ452 450mm Admissible tank depth: from 150 to 600mm.
Ref: YJ903 Mounting Kit
Ref: YJ418 240mm Ref: YJ454 500mm Voltage: 12 / 24 V. Separate ground connection.
(Flange + Counter-flange + Gaskets +
Ref: YJ420 250mm Ref: YJ456 550mm Hole distance (CTC): 54mm.
Fixing hardware).
Ref: YJ422 260mm Ref: YJ458 600mm Supplied with fixing hardware.
Ref: YJ426 280mm Ref: YJ460 650mm E San Giorgio Swing Arm Type Senders –
C VDO Swing Arm Type Senders – Fuel Level
Ref: YJ430 300mm Ref: YJ462 700mm Fuel Level
Ref: YJ432 310mm Ref: YJ466 800mm w/ Feed & Return Line (dia.: 8mm)
Ref: SG414 300-10 Ω
Ref: YJ157 10-180 Ω
Admissible tank depth: from 150 to 600mm.
Admissible tank depth: from 150 to 500mm.
E Accessories Voltage: 12 / 24 V. Separate ground connection.
Voltage: 12 / 24 V. Grounded.
Hole distance (CTC): 54mm.
Ref: YJ901 Nitrile Gasket, diameter: 54mm Hole distance (CTC): 80mm.
Ref: YJ900 Mounting Kit Tyco connectors. F San Giorgio Water / Fuel Float Senders
(Bolt-on Flange + Counter-flange + Gaskets + Supplied with fixing hardware. Voltage: 12 / 24 V. Separate ground connection.
Fixing hardware). Compatible with level sensor YJ112. Hole distance (CTC): 54mm.
Ref: YJ902 Weld-on Flange Ref: SG6XX 300-10 Ω
Lengths available: 200, 250, 300, 350, 400, 500,
600, 700mm.
10-180 Ω, 90-10 Ω and 240-33 Ω senders in
various lengths available on request.
Fuel Gauges
Fuel Gauges
Ref: YJ112 For Swing Arm Type
Fuel Gauges – Swing Arm Type
Senders, 12/24 V, 10-180 Ω
Sender
Ref: YJ022 For Tubular Type Senders,
Ref: SG026 12 V, 10-180 Ω
12/24 V, 90-10 Ω
Ref: SG025 12 V, 300-10 Ω
Cut-out diameter: 52mm. Ref: SG030 24 V, 300-10 Ω
Overall diameter: 63mm. Protection: IP65.
IP rating: IP67. Cut-out diameter: 52mm.
LED illumination. Overall diameter: 63mm.
Integrated warning light.
Supplied with connector.
A
A B
B
San G iorg i o S EI N R a ng e
Tacho / Hour Meter – 12 / 24 V
Electronic tachometer with hour
meter for optimum control of engine
speed (rpm) and maintenance
schedule.
- Protection: IP66.
- "W" terminal.
- Screw connectors.
- LED illumination.
Advantages Cut-out diameter: 100mm Cut-out diameter: 85mm Ref: SG102 Quartz Hour Meter
Time saving installation and Red pointer White pointer Voltage: 12 / 24 V.
easy setup thanks to “Up” Ref: SG175 0-3000 rpm Ref: SG176 0-3000 rpm Protection: IP64.
& “Down” pushbuttons. Ref: SG180 0-4000 rpm Ref: SG181 0-4000 rpm Cut-out diameter: 52mm.
Overall diameter: 62.5mm.
¼ Vertical Fitting - Class 1.6 ¼ Axial Fitting - Class 1.6 Straight Thermometers
Ref: M005 0- 2.5 bar Ref: M023 0- 2.5 bar Ref: T021 0 to +120°C
Ref: M008 0- 10 bar Ref: M026 0- 10 bar Brass anodized aluminum.
Ref: M011 0- 40 bar Ref: M035 0- 25 bar Oval glass indicator for easy reading.
Ref: M012 0- 60 bar Ref: M029 0- 40 bar
Ref: M015 0- 250 bar Ref: M033 0- 250 bar Precision class: 1.
Ref: M034 0- 400 bar Liquid filling: blue (mercury for temperatures
above 200°C).
Diameter: 150mm. ½ fitting.
Stem length: 35mm.
Other models available on request (63mm stem).
Pressure Senders
Switching capacity: 3 W max.
Overpressure safety: 30 bar for 2 seconds.
Type Designation
1 Grounded sender
2 Sender with separate ground connection
3 Grounded sender with warning contact
4,1 Sender with separate ground connection, dual station transmitter
1
5 Sender with separate ground connection and warning contact
Temperature Senders
Type Designation
1 Grounded sender
2 Sender with separate ground connection or grounded senders with warning contact
Circuit-Boards – VDO
Ref: VD910 View Line range CB Ref: YC936 Circuit-Board
1 alarm threshold, for VDO senders, 3 alarm thresholds for VDO senders:
max output current: 300 mA. - Fuel level senders.
- Fuel level senders. - Oil pressure senders.
- Oil pressure senders. - Oil / Water temperature senders.
- Oil / Water temperature senders.
Other models available on request.
E Opt ions
Ref: YC941 Connector + 8 terminals for YC936
engines with premix or injector lube system, Mineral lubricant for 4-Stroke marine engines.
operating under normal conditions. Protects against corrosion due to moisture and
salt, neutralizes acid combustion residues from
Outboard Tech 2T NMMA TC-W3. fuel and increases engine life time. Prevents
Ref: LU804 2 L Bottle (x12) emulsion with water. Reinforced in detergents and
Ref: LU805 5 L Bottle (x4) dispersants to warranty engine cleanliness.
Ref: LU806 20 L Container
Technosynthese® lubricant for 2-Stroke outboard Inboard Tech 4T SAE 15W50 API SH/SG/CD.
and jet ski engines with premix or injector lube Ref: LU831 2 L Bottle (x12)
system, operating at high rpm. Ref: LU832 5 L Bottle (x4)
Technosynthese® lubricant for 4-Stroke Inboard
Outboard Tech 4T SAE 10W40 NMMA FC-W. engines Reinforced with synthetic base stock
Ref: LU842 2 L Bottle (x12) providing, outstanding resistance at high
Ref: LU843 5 L Bottle (x4) temperature, easier flowing at cold temperature
Technosynthese® lubricant for 4-Stroke Outboard Pa
ck Quantity and longer lubricant life time. Protects against
or sterndrive engines calling for NMMA FC-W corrosion due to moisture.
lubricants. HTHS viscosity ensures better oil film
resistance at high temperature and absorbs fuel Inboard Tech 4T SAE 10W40
dilution produced during long idling period. API CI-4/CH-4/CG-4/CF-4/SG/SF.
Ref: LU851 5 L Bottle (x4)
Outboard Tech 4T SAE 10W30 Technosynthese® lubricant for 4-Stroke Inboard
Ref: LU839 2 L Bottle (x12) engines. Reinforced with synthetic base stock
Technosynthese® lubricant for 4-Stroke Outboard providing, outstanding resistance at high
or sterndrive engines calling for NMMA FC-W temperature, easier flowing at cold temperature
lubricants. High HTHS viscosity ensures better oil and longer lubricant life time. Protects against
film resistance at high temperature and absorbs corrosion due to moisture.
fuel dilution produced during long idling period.
Transmission Lubricants
Translube SAE90 Dexron III
Ref: LU523 300 ml Tube (x24) GM Dexron III, Ford Mercon.
Ref: LU525 24 L Container Ref: LU888 2 L Bottle (x12)
Mineral anti-emulsion gearing oil, specially Pa Technosynthese® fluid for automatic gearboxes
ck Quantity
formulated to lubricate outboard propeller boxes. and power steering systems.
High lubricating power to reduce frictions and Suitable for torque converters and hydraulic systems.
wear. Perceptibly reduces box working noise.
Extreme pressure, anti-foam, anti-corrosion and Dexron IID
anti-emulsion properties. GM Dexron IID.
Ref: LU860 2 L Bottle (x12)
Motylgear 75W90 Ref: LU861 25 L Container
API GL-4 & GL5, MIL-L-2105D. Mineral lubricant for automatic transmissions and
Ref: LU370 1 L Bottle (x12) power steering systems.
Ref: LU371 25 L Container Suitable for torque converters and hydraulic systems.
Technosynthese® lubricant for gearboxes and z-
drives. Excellent resistance to high temperatures. Tech Grease 300
API GL4, GL5 and MIL-L-2105D compliant. Ref: LU353 200 g Tube
Ref: LU354 400 g Cartridge (x24)
Gearbox 80W90 Technosynthese® multipurpose grease. Extreme
API GL-4 & GL5, MIL-L-2105D. pressure additive.
Ref: LU006 1 L Bottle (x12)
Mineral lubricant for gearboxes and z-drives. API
GL4, GL5 and MIL-L-2105D compliant.
Engine Care
Engine Clean
Ref: LU816 300 ml Can
Designed to be used in all types of
Gasoline and Diesel engines.
x12 Effectively cleans deposits and
Pa clogging which appear in the engine.
ck Quantity
The removed micro particles are then
evacuated at the time of the oil drain.
Spark Plugs
Ref Designation Pack Qty Ref Designation Pack Qty Ref Designation Pack Qty
B1090 BR6HS10 10 B3610 B6S 10 B5539 BR8HSA 10
B1092 BPR7HS10 10 B3623 BPR6EFS 10 B5627 B8EGV 4
B1157 BR8HCS10 10 B3632 B7HS10 10 B5628 BM4A 10
Pa
ck Quantity
B1160 BR5HS 10 B3672 LFR6A11 10 B5666 CR8EH9 10
B1294 BR6S 10 B3685 DPR6EA 10 B5822 BR9ES 10
B2020 D8EA 10 B3695 BP8HS 10 B5859 B4LM 10
B2147 BUZHW 10 B3711 BP4HS 10 B5887 IZFR5G 4
B2173 BUZHW2 10 B3733 BCP7EV 4 B5921 BM6A 10
B2223 BPR5EFS 10 B3823 BP8HS10 10 B6088 BR7HS10 10
B2257 BR8HS10 10 B3855 B9HS10 10 B6193 JR9C 10
B2262 ZFR5F11 10 B3932 DCPR7E 10 B6321 BP6HS10 10
B2360 CR10EK 10 B3977 BR7HS 10 B6359 BUHW2 10
B2423 BPR5FS 10 B4035 BR8HS 10 B6376 LFR5A11 10
B2453 C7HSA 10 B4065 BR6HS 10 B6431 BU8H 10
B2527 BPR4FS11 10 B4323 BR6FS 10 B6499 LFR4AE 10
B2623 BPR6FS 10 B4363 PZFR5F11 4 B6528 Y114T 10
B2633 BPR6HS10 10 B4366 B5ES 10 B6590 BUHW 10
B2634 B8HVX 4 B4459 B8S 10 B6641 CR6HS 10
B2721 B9HCS 10 B4495 BPZ8HN10 10 B6673 BPR4ES 10
B2733 BU10H 10 B4510 B6HS 10 B6726 BPMR6A 10
B2756 BKR6E11 10 B4548 CR9EK 10 B6921 BL6H 10
B2823 DR8ESL 10 B4551 BR9HS10 10 B6972 DP8EA9 10
B2927 B6FS 10 B4623 DR5HS 10 B7022 BPR6HS 10
B2982 BPR4HS 10 B4774 BPM6F 10 B7270 BP7EVX 4
B3012 BP8ES 10 B4823 DR6HS 10 B7327 BP5EY 10
B3027 B7FS 10 B4838 BP8HN10 10 B7335 B10EVX 4
B3133 BPZ8HS10 10 B5011 BP4HS10 10 B7422 BPR5ES 10
B3188 JR9B 10 B5096 C7E 10 B7423 CR8HS 10
B3212 B6L 10 B5097 B4H 10 B7447 BUZ8H 10
B3238 Y709R 10 B5110 B7HS 10 B7502 CR9EH9 10
B3252 BR9ECM 10 B5127 BR10EV 4 B7696 PZFR6H 4
B3430 B8EG 4 B5211 BP7HS 10 B7811 BP6ES 10
B3437 DR9EL 10 B5222 BR7ES 10 B7822 BPR6ES 10
B3438 BP4ES 10 B5371 BR6ES 10 B7838 DR7ES 10
B3481 DCPR6E 10 B5422 BR8ES 10 B7839 DR7EA 10
B3558 B8HS10 10 B5493 BR10ES B7890 BP7EFS 10
B3570 BR9ECS 10 B5510 B8HS 10 B7950 BP7HS10 10
Ref: MP001 Open Cell Acoustic Foam Ref: MP002 Sandwich Construction Foam
Self-adhesive for easy installation. Acoustic barrier and 3.5 kg/m2 layer to dampen vibrations.
Black protection skin to prevent oil absorption. Perforated grey PVC skin (30/100ème).
Class M4. Class M4.
Dimensions: 1000x1000x25mm. Dimensions: 1000x1000x30mm.