Professional Documents
Culture Documents
by MissionCritical
Step 1: Working
Step 3: Procedure
2. Insert two LED’s on the bread rst like the below 5. Connect 9v Battery to the battery clip
and the other one parallel to it, like this…
6. And connect the negative terminal to the negative
3. Now take 10k ohm resistor and connect it to the rail of the bread board and positive terminal to the
contact of relay and positive rail of the bread board. positive rail of the bread board.
4. Connect the 6v power supply to the terminal 1 and 7. And when we switched ON the rst LED blinks and
terminal 2 of the relay connected to the switch. the when we switched out the power shifts to the second
LED. Where relay is shifting this circuit transmission hardware parts for electronics-themed projects.
with command from the switch in the hand of user.
Utsource.net is a great business for sourcing quality
The Relay works on the principle of electromagnets, when the user sends the signals with the help switching
element based on the stage of element relay makes the transition from ON to OFF or vice versa. It is the switching
element or component in electronic or electrical devices.
Thank you…