Professional Documents
Culture Documents
CURRICULUM VITAE
-2023-
Short Resume of the CV: Nizar FERJAOUI, PhD. Mechanical
Engineering
Current Position
Key words: Mechanical Engineering, materials Science and Engineering, Design and
technology
1. EDUCATION
CV N. FERJAOUI 2023
2. RESEARCH EXPERIENCE
CV N. FERJAOUI 2023
3. ACADEMIC EXPERIENCE
4. ADMINISTRATIVE ACTIVITIES
5. TRAININGS CONDUCTED
FORMATIONS
st
Organization of the 1 Congress of Mechanical Innovations CIM‟08 under the theme
2008 « PLM : Product Life cycle Management » at the Higher Institute of Technological
Studies of Sousse from 28 to 29 April 2008.
Participation in the Training Session "Kit Experience": provided by the International
2008
Center for Business Pedagogy "CIPE" at the Higher Institute of Technological Studies
CV N. FERJAOUI 2023
of Rades on June 12, 2008.
Participation in the 2nd Congress of Mechanical Innovations CIM'2010 on April 28
2010 and 29 April 2010, organized by the Higher Institute of Technological Studies of
Sousse.
Participation in the 1st IMPACT International Conference 2010: Innovations in
Passive and Active Mechanics for the Analysis and Design of Mechanical Systems
2010
"Dynamics of Materials and Structures Systems" from 22 to 24 March 2010 Djerba -
Tunisia
Participation in the fourth edition of the International Congress: Design and Modeling
2011
of Mechanical Systems CMSM'2011 from May 30 to June 1, 2011 in Sousse-Tunisia.
Training in SolidWorks as part of the 2nd CSWA SolidWorks Certification Session,
2011 organized by the Mechanical Engineering Department of Higher Institute of
Technological Studies of MAHDIA: November 26-27, 2011.
Organization of the " Awareness of business creation and entrepreneurship" at the
2012
Higher Institute of Technological Studies of Ksar Hellal: November 14, 2012.
Training in SolidWorks as part of the 5th SolidWorks CSWP certification session
2013 organized by the Mechanical Engineering Department of Higher Institute of
Technological Studies of MAHDIA: 07-08 December 2013.
Participation in the organization of a training seminar “Matlab” in collaboration with
2013 the Association of Development and Technological Innovation ADIT: March 28-31,
2013.
Participation in the training seminar "Computer Aided Manufacturing CAM: Essential
2013 Tool in Automated Production" organized by the ISET of Nabeul in collaboration
with the ADITauto association on the 27th, 28th and 29th of May 2013.
Participation in the Third Tunisian Mechanics Congress COTUME'2014 organized by
2014 the Tunisian Association of Mechanics ATM from 24 to 26 March 2014 in Sousse-
Tunisia.
Participation in the fifth edition of the International Congress: Design and Modeling
2015
of Mechanical Systems CMSM'2013 from 25 to 27 March 2013 in Djerba- Tunisia.
Participation in the International Congress: Design and Modeling of Mechanical
2015
Systems CMSM'2015 from 23 to 25 March 2015 in Hammamet- Tunisia.
Organization of the day "Intellectual Property and the Culture of Patenting" at the
2017
Higher Institute of Technological Studies of Ksar Hellel: January 26, 2017.
6. CERTIFICATIONS
7. TECHNOLOGY TRANSFER
CV N. FERJAOUI 2023
Framework and partnership agreements have been signed between different companies and
the Higher Institute of Technological Studies of Ksar Hellal following projects that have been
realized and exploited.
A framework partnership agreement signed between the Higher Institute of
Technological Studies of Ksar Hellal on the one hand and the Tunisian society of baby
article manufacture SOTUFAB.
A framework partnership agreement signed between the Higher Institute of
Technological Studies of Ksar Hellal and the ideal society of mechanical works
SITRAMEC.
A framework partnership agreement signed between the Higher Institute of
Technological Studies of Ksar Hellal and TPF Engineering society.
8. TEACHING MODULES AND PEDAGOGICAL SUPPORTS PREPARED
Since September 2007, I have regularly participated in educational groups, whether in the
preparation of course materials or in the creation and revision of practical work or in the
preparation of supervised homework and exams.
The teaching materials of the modules I taught are as follows:
Applied License regime: Higher Institute of Technological Studies of Ksar Hellal (from
2010 - until now):
Static and Kinematic Solids: (Course & Tutorials)
Mechanical Workshop (Practical work)
Production methods: (Courses & Practical Work)
Machining processes: (Tutorials & Practical Work)
Construction Technology (Level 1) : (Courses & Practical Work)
Construction Technology (Level 2): (Courses & Practical Work)
Production by numerical control: (Courses & Practical Work)
Process and production methods workshop (Practical work)
Characterization of materials: (Course & Practical Work)
Metallic Materials (Tutorials & Practical Work)
Design Workshop (Practical Work)
Digital Control Production Workshop (Practical work)
CV N. FERJAOUI 2023
Production Techniques (Practical work)
9. COMPUTER SKILLS
English 4 3 3
French 5 4 4
CV N. FERJAOUI 2023