Professional Documents
Culture Documents
LOCTITE 5061
October-2017
The coating is dry-to-the touch and ready for immediate use. Test Specimens: M10 Nuts & Bolts
Applied Torque: 40 Nm
APPLICATION AREAS
Substrates K Values
Sealing threaded components such as pipe couplings and As received 5061
fittings, with either parallel or tapered threads, against gases, Black Oxide Bolts 0.22 - 0.38 0.16 - 0.28
aqueous and non-aqueous fluids up to a temperature of 150 Mild Steel Nuts
°C. Particularly suitable in situations where threaded Zn Dichromate 0.22 - 0.34 0.17 - 0.25
assemblies are required to be ready for immediate use in a Stainless Steel 0.3 - 0.46 0.23 - 0.39
high volume production environment where it may not be
convenient to use a liquid sealant. LOCTITE 5061 can be
used to seal effectively on a wide variety of substrates
including metals and plastics. The sealing of flat faces can
TYPICAL ENVIRONMENTAL RESISTANCE
also be achieved with this product.
TYPICAL PROPERTIES OF DRY MATERIAL Test Procedure: MIL-S-46163A Pressure rig (modified)
Substrates: M10 Black Oxide Bolts & Mild Steel
All properties described below refer to the dry pre-applied Nuts
coating on parts as seen by end users.
Chemical/Solvent Resistance:
PERFORMANCE OF PRE-APPLIED MATERIAL Solvent Temp. Press. 100hr 500hr 1000hr
Water 90°C 4 bar No leaks No leaks No leaks
Pressure Tests on Nut & Bolt Assemblies: Motor Oil 150°C 4 bar No leaks No leaks No leaks
Reference 0.0
Henkel AG & Co. KGaA Henkel Corporation USA Henkel (China) Co. Ltd.
40191 Düsseldorf, Germany Madison Heights, MI 48071 201203 Shanghai, China
Phone: +49-211-797-0 Phone: +1-248-583-9300 +86.21.2891.8000
For more information, please contact us on www.henkel.com