Professional Documents
Culture Documents
AR. ERIC V. DIZON, UAP QUIZ NO.3 services; innovation and research towards the sustainable development of the
society.
evdizon@dhvsu.edu.ph
I. MULTIPLE CHOICE: SELECT THE BEST ANSWER BY SHADING PROPERLY THE ANSWER SHEET BELOW
A. Warrington C. Seale
B. Filler Wire D. Combined
A. Fabric buildings have a low cost per square foot, and initial
investment is low.
B. Fabric structure is that you install it rapidly and easily
C. Loss of tension is dangerous for stability
D. Thermal values limit use
5. Identify the image of Steel cable on the right, as part of the materials needed for tensile structure.
A. Warrington B. Seale C. Filler Wire D. Combined
6. Which type of tensile cable structure is the image on the right side?
A. Anticlastic C. Trussed Structured
B. Stayed Structure D. Pneumatic
7. Most tensile membrane structures have high sun reflectivity and low absorption of sunlight, thus resulting in less energy used
within a building and ultimately reducing electrical energy costs.
Page 1 of 3
BTECH 413_QUIZ NO.3_1st Semester-A.Y. 2022-2023
8. Membrane material, is a cost effective solution that requires less structural steel to support the roof compared to conventional
building materials, enabling long spans of column-free space
A. Light Weight in Nature B. Excellent Durability C. Cost Benefits D. Low Maintenance
9. It is a cable structure that is used to provide additional support to a structure, such as a mast or tower, by transmitting its load
to the ground. It is usually anchored at one end and attached to the structure at the other end.
A. Trussed Structures B. Stayed Cable C. Anticlastic D. Suspended Cable
10. Identify the image of Steel cable on the right, as part of the materials needed for tensile structure.
A. Warrington B. Seale C. Filler Wire D. Combined
11. Tensile Membrane systems are somewhat unique in that they require minimal maintenance when compared to an equivalent-
sized conventional building
A. Light Weight in Nature B. Excellent Durability C. Cost Benefits D. Low Maintenance
12. It is a type of membrane or fabric material that is used for internal use only
A. PTFE B. PVDF C. Polycarbonate D. PVC-coated glass
13. The PVC coating contains the additives to protect it from sunlight
14. Identify the image of Steel cable on the right, as part of the materials needed for tensile structure.
A. Warrington B. Seale C. Filler Wire D. Combined
15. Structures are those in which the centers of curvature are located on opposing sides of the surface. This is commonly
described as a saddle shape. A hyperbolic paraboloid is an anticlastic surface.
A. Anticlastic B. Stayed Structure C. Trussed Structured D. Pneumatic
16. Structure that is supported by cables coming from beams or trusses that sit atop a concrete center column or core. The
design allows the walls, roof, and cantilevered floors to be supported entirely by cables and a center column.
A. Suspended B. Stayed Structure C. Trussed Structured D. Pneumatic
17. Air-supported structures are supported by internal air pressure. A network of cables stiffens the fabric, and the assembly is
supported by a rigid ring at the edge.
A. Suspended B. Pneumatic Structure C. Trussed Structured D. Pneumatic
A. Little no Rigidity B. Thermal Values limit C. Flexible D. Loss of tension is dangerous for stability
19. The fabric is elastic and stretches and has a strong tensile strength that will creep only a few percent over how many years?
20. Which type of tensile cable structure is the image on the right side?
PREPARED BY:
AR. ERIC V. DIZON, UAP
BTECH 413 Instructor | Ar Department
Page 2 of 3
BTECH 413_QUIZ NO.3_1st Semester-A.Y. 2022-2023
Page 3 of 3
BTECH 413_QUIZ NO.3_1st Semester-A.Y. 2022-2023