Professional Documents
Culture Documents
2.4GHz 6 Channel
FHSS Technology
Digital Proportional
Radio System
INSTRUCTION MANUAL
www.copterx.com
Copyright © 2011 KY MODEL Company Limited.
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
MENU
Table of content 1
1. Introduction 2
2. Caution 2
3. Transmitter Chart 3
4. 2.4G Binding 3
5.1 Heli. Connection Diagram (3 Servos CCPM) 4
5.2 Airplane Connection Diagram 5
5.3 V-Tail COnnection Diagram 6
5.4 DELTA-MIX Connection Diagram 6
6. CX-CT6C Basic Features 7
7. LED Displaying Board Function 7
8. Menu 8
9.1. System Menu 9
9.2. MODEL.SET 10
9.3. PLANE TYPE 12
9.4. STICK MODE 12
9.5. STICK ADJ 13
9.6. TRAINER 13
10.1. Function Menu (Heli.) 14
10.2. D/R 16
10.3. SUB. TRIM 17
10.4. TRAVEL 18
10.5. CH.REV 18
10.6. SWASH.MIX 19
10.7. GYRO.SENS 19
10.8. THRO.CURV 20
10.9. MONITOR 20
10.10. PIT.CURV 21
10.11. THRO.HOLD 21
11.1. Function Menu for Fixed Wing Plane 22
11.2. Function Menu for V-Tail 22
11.3. Function Menu for Delta Mix 23
12. Technology Data 23
01
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
1. Introduction
Thank you for purchasing the CopterX CX-CT6C digital proportional radio system. With advanced
micro processor control, large LCD display, glitch free FHSS 2.4GHz system, multiple model
memory, build-in program for helicopter, airplane, v-tail and delta wing. Make this one of the most
advance radio system in the market. Please keep this manual for future reference.
2. Caution
Please read this manual carefully and keep it for reference in the future.
Warning:
1. This product was designed only for radio controlled models;
2. The usage of this product should be approved by local relevant law or regulations;
3. We will not be responsible for the damages caused by unauthorized modification, adjustment or
replacement of parts of this product;
4. The manual may be altered without prior notice. Please contact us if you have any corrections or
clarifications that should be made in the manual.
Please pay more attention to the parts in this manual, which are marked with “Warning”
Before starting the transmitter, make sure the transmitter batteries are well loaded and with
enough power. And please check and confirm that the servos are all well and properly connected.
Please take off batteries from transmitter after flying and during the transportation.
Please check and have a test on control surfaces to confirm the transmitter handling of each part
prior to each takeoff.
Keep the radio system away from moisture, high temperature and strong vibration. Do not clean
the product with solvent.
Do not fly your models near airfield, schools, hospitals, residences, power transmission network,
communication facilities and other places that are forbidden for starting the transmitter. Please
stop flying your models with the radio on rainy or windy days, or at night.
Do not fly the models when you are tired, sick, intoxicated, or not in good spirit.
The antenna does not touch anything else when power switch is turned on.
Do not leave this product and its accessories within the reach of small children.
Please use this product according to your local relevant law or regulation, we are not responsible
for any incidents or damages.
02
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
3. Transmitter Chart
Antenna
4. 2.4G Binding
The binding process: turn on the transmitter, then connect the power of receiver keeping the
receiver “BIND” button till the light turn on GREEN which means the binding is successful. After that,
it is unnecessary to bind again.
Caution: make sure the RX and TX is within one meter, and around 10 meters no similar device. If
the light flashing, showing the binding failure, please do again as above indication.
03
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
(AILE.)
Front
(ELEV.)
(PITCH)
RUDD. Servo 4
Gyro
PITCH Servo 3
Remote Gain
Power
Rudder
Receiver Electronic
Speed
Controller
ELEV.
Motor
AILE.
Servo 1 Servo 2
04
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
Servo 5
Servo 4
Flap
Gear Servo 3
Power
RUDD.
Receiver Electronic
Speed
Controller
ELEV.
Motor
AILE.
Servo 1 Servo 2
05
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
06
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
NOTE: If “THRO HOLD” is shown on LCD when you turn on the power, please move “TH. HOLD”
switch to the position 0, otherwise, you can not properly enter power on interface.
TH. HOLD
1 0.0V C T6 C
NOTE: If “IDLE ON” is shown on LCD when you turn on the power, please move “IDLE” switch to the
position N, otherwise, you can not properly enter power on interface.
IDLE
1 0.0V C T6 C
IDLE ON F UN. S Y S.
ME NU ME NU
07
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
8. Menu
FUN. MENU
H E LI C PLANE V -T AI D E LT A
D/R D/ R D/R D/R
S UB.T RI M S UB.T RI M S UB.T RI M S UB.T RI M
T R AV E L T R AV E L T R AV E L T R AV E L
C H. R E V C H. R E V C H. R E V C H. R E V
S WAS H. MI X M O NI T O R M O NI T O R M O NI T O R
G Y R O.S E N E V -T AI L DE LT A-MI X
T H R O.C U R V
M O NI T O R
PI T.C UR V
T H R O. H O L D
SYS. MENU
H E LI C PLANE V -T AI D E LT A
M O D E L.S E T M O D E L.S E T M O D E L.S E T M O D E L.S E T
PLANETYPE PLANETYPE PLANETYPE PLANETYPE
S TI C K M O D E S TI C K MO D E S TI C K MO D E S TI C K MO D E
S TI C K A D J S TI C K A D J S TI C K A D J S TI C K A D J
T R AI N E R T R AI N E R T R AI N E R T R AI N E R
1. MODEL.SET: Here you can set the parameter of the model, rename, save and format the corre-
sponding model parameter, and come back to the factory setting.
2. PLANETYPE: Four types of plane are selectable. Helicopter, fixed wing(plane), V-Tail and Delta.
3. STICKMODE: Operating stick selection: Mode 1 (right throttle), Mode 2 (left throttle), Mode 3 and
Mode 4.
4. STICK ADJ: Neutral position setting of 4 proportional channels controlled by the operating stick.
5. TRAINER: This menu can be used for simulator setting.
08
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
TRAINER
S Y S. M E NU S Y S. M E NU
S TITCRKAI
ANDJ
ER S TIC
T RKAI
ANDJ
ER
T R AI N E R T R AI N E R
NORMAL T R AI N E R
09
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
9.2. MODEL.SET
S Y S. ME NU MO D E L MOD0
ENTER
M OD E L.S E T RENAME
PLANE TYPE S AV E AS
S TI C K M OD E R E C OV E R
Recall Model
Operation:
1. Press “up” or “down” to select “SYS.MENU”, and press “ENTER” to come to the interface.
2. Press “ENTER” to come to “MODEL.SET” interface, and now the shadow area is the item that can
be set currently.
3. Press “INC” or “DEC” to select mode you expect. The default setting are Mod1, Mod2, Mod3,
Mod4, Mod5, Mod6.
4. Press “ENTER” to confirm when a model number is selected, otherwise your selection is invalid.
Remark: when your selection is successful, the model naming area in the main interface will show
the corresponding change.
Please note: All your settings have been saved in the current model number.
M OD E L MOD0 R E N A M E UOD0
ENTER
RENAME 01 23456789
ABCDEFGHI J
S AV E AS
KLMNOPQRST
R E C OV E R UVWXYZ
Rename model
Operation:
1. Press “up” or “down” to select “SYS.MENU”, and press “ENTER” to come to the interface.
2. Press “ENTER” to come to “MODEL.SET” interface, and now the shadow area is the item that can
be set currently.
3. Press “up” or “down” to select the setting function items, and press “ENTER” to come to
“RENAME”
4. Move the stick in left stick four directions to select letters or digits to rename your item. Press
“ENTER” to confirm when letters or digits are selected, otherwise your selection is invalid.
Caution: When cannot select letters to the left need redone “STICK ADJ”.
Remark: when the cursor is at ‘ or ’, press “ENTER” to quickly change the single letter of the
name.
10
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
M OD E L MOD0 MO D E L MO D 0
ENTER
RENAME RENAME
S AV E AS S AV E AS
R E C OV E R R E C OV E R
M OD E L MOD0 MO D E L MO D 0
ENTER
RENAME RENAME
S AV E AS S AV E AS
R E C OV E R R E C OV E R
11
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
12
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
9.6. TRAINER
S Y S. ME NU S Y S. ME NU S Y S. ME NU
ENTER
S TIC K ADJ S TIC
T RKAI
ADJ
NE R S TIC
T RKAI
ADJ
NE R
T R AI N E R T R AI NE R T R AI NE R
NORMAL T R AI NE R
13
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
F UN. M E NU F UN. M E NU
T H R O.C UR V T H R O. HO L D
MONI T O R
PI T.C UR V
D/R
DR AI L E 0 DR ELEV0 DR RUDD0
H 1 00 H 1 00 H 1 00
I 0 I 0 I 0
O 0 O 0 O 0
L 1 00 L 1 00 L 1 00
SUB. TRIM
S UB. T RI M S UB. T RI M
AI L E 0 R UD D 0
ELEV 0 GEAR 0
THRO 0 PI T H 0
TRAVEL
T R AV E L T R AV E L
AI L E 1 00 1 00 R UD D 1 00 1 00
ELEV 1 00 1 00 GEAR 1 00 1 00
THRO 1 00 1 00 PI T H 1 00 1 00
CH.REV
R E V.S W
CH 1 2 3 4 5 6
REV
NOR
14
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
SWASH.MIX
S WAS H. MI X
AI L E -5 0
PI T H -5 0
ELEV -5 0
GYRO.SENE
G Y R O.S E NS
P OS 0 -1 00
P OS1 1 00
THRO.CURV
T H R O. C UR V T H R O. C UR V T H R O. C UR V
NOR IDLE0 I D L E1
I 0 I 0 I 0
O 0 O 1 00 O 1 00
L 0 L 1 00 L 1 00
MONITOR
1
2
3
4
5
6
PIT.CURV
PI T. C UR V PI T. C UR V PI T. C UR V
NOR IDLE0 I D L E1
I 0 I 0 I 0
O 0 O 0 O 0
L 0 L 0 L 0
THRO.HOLD
T H R O. HO L D
SW ON
V A L UE
15
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
10.2. D/R
AILE DR SW A/E/R D/R
DR AI L E 0 POS0/POS1 0
H 45 1
I 0
O 0
L 1 00
D/R operation for AILE
Operation:
1. Press “up” to select “FUN.MENU”, and press “ENTER” to come to the interface.
2. Press “up” or “down” to select “D/R”, and now the shadow area is the item that can be set
currently. Press “ENTER” to go to the next step.
3. Press “A/E/R D/R” to select “AILE D/R”, and LCD shows the corresponding “AILE0” or “AILE1”
4. Press “up” or “down” to select “H” or “L”, and press “INC” or “DEC” to set the corresponding value
and dual band curve will change accordingly.
5. Set “AILE D/R” switch on the top of the transmitter. When “A/E/R D/R” is in “0” position, LCD
shows “AILE0”, and now you can set D/R value for “AILE0”. And when “A/E/R D/R” is in “1” position,
LCD shows “AILE1”, and now you can set D/R value for “AILE1”
6. After your setting, press “EXIT” to save the setting and leave the operation.
16
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
17
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
10.4. TRAVEL
F UN. ME NU T R AV E L
ENTER STICK:
D/ R AI L E 1 00 1 00 RUDD. RU
S UB. T RI M ELEV 1 00 1 00
T R AV E L T HR O 1 00 1 00 EL
Travel operation
Operation:
1. Press “up” to select “FUN.MENU”, and press “ENTER” to come to the interface.
2. Press “up” or “down” to select “TRAVEL”, and now the shadow area is the item that can be set
currently. Press “ENTER” to go to the next step.
3. Press “up” or “down” to select the channel you like to adjust, use Rudder stick to select the high
or low value.
4. Press “INC” or “DEC” to set the travel value.
5. After your setting, press ‘EXIT” to save the setting and leave the operation.
10.5. CH.REV
F UN. ME NU R E V.S W R E V.S W
ENTER
C H. R E V CH 1 2 3 4 5 6 CH 1 2 3 4 5 6
S WAS H. MI X REV REV
G Y R O.S E N E NOR NOR
18
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
10.6. SWASH.MIX
F UN. M E NU S WAS H. MI X
ENTER
C H. R E V AI L E -5 0
S WAS H. MI X PI T H -5 0
G Y R O.S E N E ELEV -5 0
10.7. GYRO.SENS
F UN. ME NU G Y R O.S E NS GYRO.SENS
ENTER 0
C H. R E V GYRO.SENS 1
P OS 0 -2 0 POS0/POS1
S WAS H. MI X
P OS1 1 00
G Y R O.S E N E
19
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
10.8. THRO.CURV
IDLE SW T HR O. C UR V T HR O. C UR V
OFF
0 IDLE SW NOR I D L E1
1 OFF/POS0/POS1
I 0 I 20
O 0 O 80
L 0 H 1 00
10.9. MONITOR
F UN. ME NU 1
ENTER 2
T H R O. C UR V 3
MONI T O R 4
5
PI T. C UR V 6
Monitor system
Operation:
1. Press “up” to select “FUN.MENU”, and press “ENTER” to come to the interface.
2. Press “up” or “down” to select “MONITOR”, and now the shadow area is the item that can be set
currently. Press “ENTER” to go to the next step.
3. When you move the sticks or channel switches, you can find the corresponding channel bars will
change accordingly. This function is designed to monitor the working conditions of the transmitter.
4. After your setting, press “EXIT” to save the setting and leave the operation.
Remark: This function helps you adjust the setting, neutral trim as well as channel inspection.
20
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
10.10. PIT.CURV
IDLE SW PI T. C UR V PI T. C UR V
OFF
0 IDLE SW NOR I D L E1
1 OFF/POS0/POS1
I 0 I 20
O 0 O 20
L 0 H 1 00
Pitch curve
Operation:
1. Press “up” to select “FUN.MENU”, and press “ENTER” to come to the interface.
2. Press “up” or “down” to select “PIT.CURV”, and now the shadow area is the item that can be set
currently. Press “ENTER” to go to the next step.
3. There are three pitch curves to be selected, normal, IDLE 0 and IDLE 1 by the switch at the left
top of the transmitter.
4. Press “up” or “down” to select the pitch curve point. There are 5 points, they are L, 1, 2, 3, H. Press
“INC” or “DEC” to set the corresponding value separately, and the pitch curve will change accordingly.
5. After your setting, press “EXIT” to save the setting and leave the operation.
Remark: the transmitter can save 3 groups of different pitch curves.
10.11. THRO.HOLD
F UN. ME NU T HR O. HO L D TH.HOLD
ENTER 0
T HR O. HO L D TH.HOLD 1
SW ON POS0/POS1
V A L UE
Throttle hold
Operation:
1. Press ‘up” to select “FUN.MENU”, and press “ENTER” to come to the interface.
2. Press “up” or “down” to select “THRO.HOLD”, and now the shadow area is the item that can be set
currently. Press “ENTER” to go to the next step.
3. Set the “TH.HOLD” switch at the top of the transmitter. When “TH.HOLD” is in “0” position, LCD
shows SW “OFF”; When “TH.HOLD” is in “1” position, LCD shows SW “ON”. Press “INC” or “DEC” to set
the hold position.
4. After your setting, press “EXIT” to save the setting and leave the operation.
21
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
GEAR CH (Ch5)
FLAP CH (Ch6)
F UN. ME NU V -T AI L
ENTER
C H. R E V E L E V1 50
ELEV2 50
MONI T O R
R UD D2 50
V -T AI L R UD D1 50
V-Tail mixing
Operation:
1. Press “up” to select “FUN.MENU”, and press “ENTER” to come to the interface.
2. Press “up” or “down” to select “V-TAIL”, and now the shadow area is the item that can be set
currently. Press “ENTER” to go to the next step.
3. Press “up” or “down” to select ELEV1, ELEV2, RUDD1, RUDD2. And set the mixing value by “INC” or
“DEC”
4. After your setting, press “EXIT” to save and leave the operation.
22
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
F UN. ME NU DE LT A-MI X
ENTER
C H. R E V AI L E 2 50
AI L E1 50
MONI T O R
E L E V1 50
DE LT A-MI Xa ELEV2 50
Delta mix setting
Operation:
1. Press “up” to select “FUN.MENU”, and press “ENTER” to come to the interface.
2. Press “up” or “down” to select “DELTA-MIX”, and now the shadow area is the item that can be set
currently. Press “ENTER” to go to the next step.
3. Press “up” or “down” to select AILE2, AILE1, ELEV1, ELEV2. And set the mixing value by “INC” or
“DEC”
4. After your setting, press “EXIT” to save and leave the operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Due to unforeseen changes in production procedures, the information contained in this manual is
subjuct to change without notice.
23
www.copterx.com
Copyright © 2011 KY MODEL Company Limited.