Professional Documents
Culture Documents
PR 9376/.. Series
Speed Sensor
● Rugged construction
● Frequency range up to
12 kHz
● Temperature range
-30…+100°C
Applications:
The PR 9376 speed sensor is measuring and supervision of slip,
ideally suitable for contact less stand still detection etc. can be Changes opposite to the
speed measurements at ferromag- realized. parent model
netic machine components. Rugged With its high resolution, fast elec-
construction, simple installation and tronics and steep pulse slopes, the Opposite the parent model (mag-
excellent switching characteristics sensor PR 9376 is suitable for netosensitive semiconductor resis-
permit the use within a wide appli- measuring very high as well as very
tors) the following changes arise in
cation field in industry und labora- low speeds.
tory. Another application area is the use the technical data:
Together with speed measuring as proximity switch e.g. for switch-
amplifiers of the MMS 6000 pro- ing, counting or generating alarms Max. measuring frequency:
gram of epro, various measuring at passing components or at ma- old: 20 kHz
tasks such as speed measurement, chine parts coming sideways closer. new: 12 kHz
detection of rotational direction, Permissible GAP (Modulus=1)
old: 1,5 mm
new: 1,0 mm
Supply voltage:
old: 8…31,2 V
new: 10…30 V
Machine Monitoring Systems
Ø10
117,5
Output pulse level: IP 66 according to DIN 40050
at 100 (2.2) k load and 12 V supply
voltage *) When connecting the output load with PR 9376/000-XXX
HIGH: >10 (7) V* 0V during LOW output level or when
Pulse rise and fall times: supply voltage during HIGH output level, 105
Ø10
Ø3,9
<1 µs; without load and over the the output will get high-resistance. 119
Installation kit
entire frequency range 25
Dynamic output resistance:
<1 kΩ* Installation note
Permissible load: 7
The sensor must be adjusted
M18x1,5
Current consumption:: ment of the trigger thresholds. If the Magnet Amplifier DSP
Output white PULS
amplifier
max. 25 mA at 25°C and 24 V sensor seems to be misadjusted, it has Hall
supply voltage and without load to be switched off for a short moment. element
2
After power-on the sensor will "learn" the screen -VS
Fig. 4
6040-00021 25/05 Reh
PR 9376/000 - 001Speed sensor, 3m cable, without protection tube ……………………………………………….. 9200 – 00094
PR 9376/010 - 001Speed sensor, 3m cable, with protection tube……………………………………...................... 9200 – 00095
PR 9376/010 - 011Speed sensor, 5m cable, with protection tube………………………………………………….... 9200 – 00097
PR 9376/010 - 021Speed sensor, 10m cable, with protection tube……………………………………………….…… 9200 – 00096
© epro GmbH
Jöbkesweg 3 D-48599 Gronau Further information:
Tel. +49 (0) 2562/709-245 Internet: www.epro.de
Fax +49 (0) 2562/709-255 E-Mail: info@epro.de