Professional Documents
Culture Documents
2
T
2 INCH SQ
TEST
SQUARE
1/2” SEAM
INCLUDE
1 2 3 4 5 6 7
INCLUDED IN PATTERNS
BACK ARMHOLE
FRONT ARMHOLE
Aura
PATTERNS
Aura
8 9 10 Aura
11 12 13 14
FRONT: CUT 2
XXXL XXL XL L M S XS
CUT ON FOLD
XXX
XXXL XXL XL L M S XS PATTERNS MEN’S LONG SLEEVE TOP
PATTERNS
CUT ON FOLD
BACK: CUT 1
XS
XL
XXL
XXXL
15 16 17 18 19 20 21
XS
S
M
L
XL
XXL
XXXL
XL
M
S
BACK ARMHOLE
FRONT ARMHOLE
Fabric Suggestions
It is recommended to use comfortable knit fabric that is lightweight.
Stretchy t-shirt fabrics will perform best such as jersey, knits, cotton
jersey.
Fabric Requirements
For sizes XS-XL , you will need 1.7 meter / 1.9 yard of fabric.
For sizes XXL-XXXL , you will need 2.4 meter / 2.6 yard of fabric.
Sizing
XS 32-34” XS 81-86cm
S 35-37” S 88-94cm
M 38-40” M 96-101cm
L 41-43” L 104-109cm
XL 44-46” XL 111-116cm
Pieces to Cut
x1 front bodice (cut on fold)
x1 back bodice (cut on fold)
x2 sleeves
x1 neckband
Construction
Step 2 - With right sides facing, sew the front and back
bodices together at the shoulder seam. Sew using a
1cm seam allowance and with a zig-zag stitch or use an
overlocker.
Step 3 - Open the bodice out and pin the sleeves at the
armholes with right sides facing. Sew using a 1cm seam
allowance and with a zig-zag stitch or use an overlocker.
Step 4 - Once both sleeves are sewn in, with right
sides facing sew the side seams of the top and the
sleeves in one go. Sew using a 1cm seam allowance
and with a zig-zag stitch or use an overlocker.
Step 5 - Take the neckband piece and stitch down the short side with right
sides together using a 1cm seam allowance, making a circular band
Step 6 - Fold the neckband in half with wrong sides together and press.
This will create the top of the band with a folded neat edge and the
bottom of the band with the raw sides.
Step 7 - With right sides facing, attach the raw edge of the neckband to
the neckline, evenly distributing the fabric. You may need to stretch the
neckband slightly as you pin it for it to fit properly. Sew using a 1cm seam
allowance and finish the raw edge. Now press the neckband upwards so
the seam is facing the inside of the garment. You will now have a clean
and finished neckband.
Step 8 - Hem the top by folding the edges up by 1cm and pressing.
Stitch around the hem using a standard or double needle for a neat