Professional Documents
Culture Documents
شاكوش الحفار
شاكوش الحفار
Operation Features
Inlet (1) Reg.(2)
Inlet flow passes through flow ports. The solenoid valve Line body construction with
the adjustable orifice and vents the spring chamber to a three ports allows direct
the radial holes in the spool/ drain line and in its NORMAL connection into hydraulic
sleeve assembly then out (de-energized) mode all inlet systems. Leakproof adjust
of the regulated port. The flow is diverted to the bypass screw gives easy, accurate
By-pass (3) Drain (4)
pressure drop across the port. The pre-set regulated adjustment to required flow
orifice is sensed at each end flow is selected by energizing setting. Remote functional
of the spool, producing a force the solenoid. The adjustable selection with solenoid
which, at the required flow relief valve vents the spring operation. Adjustable relief
rate, overcomes the spring chamber at the pre-set valve gives system protection.
force. The resultant movement pressure and diverts the flow Hardened and ground working
of the spool regulates the flow to the bypass port. It may parts give accurate flow
by opening the radial valve be necessary to fit a 10 bar control and long working life.
ports to the bypass port and check valve in the bypass or
closing the regulated regulated line to ensure the
valve switches fully.
65 15 290 65
Regulated flow - L/min
60 2FPH195
limitation of the regulated line. 50 2FPH95
55 12.5 235 52
2FPH55
40
45 10
165 39
30
35 7.5
20 115 26
25 5
15 10
2.5 60 13
0 0 0 0
200 100 0 100 200 200 100 0 100 200
Load pressure - bar Load pressure - bar
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
H-550.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 An Eaton Brand
2FPH - Flow Regulator
Pressure compensated regulator/diverter, priority style. solenoid switch
Up to 160 L/min (42 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7
1 4
Tank drain
D line
C G Do not block
1/4” BSP
(1/4” SAE)
K
3 2
E
H
F
B
O A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
An Eaton Brand EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 H-551.A
2FPH - Flow Regulator
Pressure compensated regulator/diverter, priority style. solenoid switch
350 L/min (92 USgpm) • 350 bar (5000 psi)
LS
Operation Features
Inlet Reg.
Inlet flow passes through and in its de-energized mode Line body construction with
the adjustable orifice and all inlet flow is diverted to three ports allows direct
the radial holes in the spool/ the bypass port. The pre-set connection into hydraulic
sleeve assembly then out regulated flow is selected by systems. Leakproof adjust
of the regulated port. The energizing the solenoid. The screw gives easy, accurate
By-pass Drain
pressure drop across the adjustable pilot valve vents adjustment to required flow
orifice is sensed at each end the spring chamber when the setting. Remote functional
of the spool, producing a force regulated line reaches the selection with solenoid
which, at the required flow preset pressure, diverting the operation. Adjustable relief
rate, overcomes the spring flow to the bypass port where valve gives system protection
force. The resultant movement the pressure can continue whilst allowing bypass
of the spool regulates the to rise if necessary. It may pressure to rise above setting
flow by opening more radial be necessary to fit a 10 bar if required. Hardened and
holes to the bypass port. The check valve in the bypass or ground working parts give
solenoid valve vents the spring regulated line to ensure the accurate flow control and long
chamber to a drain line valve switches fully. working life.
Performance Data
flow and adjustable pressure 4000 2000 0 2000 4000 4000 2000 0 2000 4000
Regulated flow - US gpm
300 78 300 78
Regulated flow - L/min
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
560.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 An Eaton Brand
2FPH - Flow Regulator
Pressure compensated regulator/diverter, priority style. solenoid switch
350 L/min (92 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7
Dimensions
mm (inch)
Complete Valve
Basic Code S N P
2FPH F
H
G M
Inlet
R
B
ØQ
J L
H K
Tank
drain line
Do not
F block
Load
Bypass Reg LS D sensing
port
1/4” BSP
A D E (1/4” SAE)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
An Eaton Brand EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 561.A