Professional Documents
Culture Documents
4
5" 7/8 Lobes 8.4 Stages
www.dyna-drill.com
USA: 23400 Colonial Parkway, Katy, TX 77493 Tel: (281) 227-1250, Fax:( 281) 227-1255
Canada: Bay E.; 2802- 5th Street, Nisku, Alberta T9E-0H1 Tel:(780) 955-7711, Fax: (780) 955-7833
Dubai: Oilfields Supply Center, Bldg B-30, P.O. Box 261039, Dubai, UEA, Tel: 011-971-4-8100310, Fax: 011-971-4-8100313
POWER SECTION
ROTOR SPECIFICATIONS STATOR SPECIFICATIONS
Inch mm Inch mm
Overall Length 251.6 6391 Overall Length 250.0 6350
Contour Length 235.0 5969 Rubber Cut Back 8.00 203
Eccentricity 0.173 4.38 Tube O.D. 5.00 127.0
Major Diameter 3.354 85.19 Tube I.D. 4.00 101.6
Head Diameter 3.630 92.20
Weight 520 (lbs) 235.9 (kg) Weight 547 (lbs) 248 (kg)
Material 17-4SS Number of Stages 8.4
2 3/8'' Hughes Rubber Type NBR-HR
Thread Form*
Slimline H-90 Tube Material 4142 Seamless Tubing
* Alternate or custom thread forms are available
FIT INFORMATION
POWER SECTION FIT CHANGE
NBR-HR Minor Diameter
Temp Change (C)
10 38 66 93 121 Stator Size Inch mm
0.040 Undersize
____ NBR-HR
0.84 Standard
0.030 Oversize 3.024 76.81
0.63
Inch
mm
Double Oversize 3.039 77.19
0.020
0.42 Nominal Fit at 75 F (25 C)
0.010 0.21 Undersize
Standard
0.000 0 Oversize -0.015 -0.38
0 50 100 150 200 250 Double Oversize -0.030 -0.76
Temp Change (F)
NBR-HR Torque
Power Section Diff Pressure (kPa)
ft-lb
Nm
0 3000 6000 9000 12000
300
8000
8000
2000
60
0
0
Operating a power section above the maximum recommended differential pressure will reduce stator life. Performance Curves are for reference only. Actual power
section performance may vary depending on the down hole temperature and rotor/stator fit. Performance data are subject to change without notice. Power calculation
is based on maximum RPM and full torque. Stator sizes subject to change without notice. Copyright 2015 Dyna-Drill®. All rights reserved.
3/19/2015