Model BW219D-4 Serial No. Code No. Model BF6M2012C Engine No. Front Rear Machine Condition Report Customer Name SERVICE METER INSPECTOR Machine Location At Inspection Daily Name BULLDOZER BOMAG Date UNITED TRACTORS Tbk. United Tractros's Branch : BW219D-4 ITEM CONDITION UNIT STANDARD ACTUAL CORECTION MADE FINAL ANALISYS Result ENGINE (Engine Oil , Oil Qty = 12.5Litre SAE 15w -40 API CG4/CH4) without oil filter Eng. Low Hyd. Oil Temp. 850 ± 150 Engine Speed Rpm Eng. High 55 - 60° C 2475 ± 125 Blow-by Pressure Eng. High Oil Temp. 60° C mm H2O 100 Lub Oil Pressure Eng. Low Oil Temp. 80° C Bar 0,8 Compression Crank Only Oil Temp. 40 - 60° C Bar 30 - 38 Nozzle Pressure Bar 250 Intake 0.3 Valve clearance mm Exhaust 0.5 TRAVEL PUMP (HYD. Oil , Oil Qty=60Litre HO HVLP 46 VI 150) Serial No Charge Press Neutral Eng. Low 24 - 26 MA Port Press at Fwd / POR V Eng. High 400+26 MB Port Press at Rvs / POR V Eng. High Hyd. Oil Temp. 50°C Bar MA Port Press at Fwd / MFV Eng. High 400+26 MB Port Press at Rvs / MFV Eng. High Leakage Oil Rate of Motor Front Max 2 Ltr / Min Leakage Oil Rate of Motor Rear Max 2 VIBRATION PUMP (DOUBLE FREQUENCY) Charge Pressure 26 Hyd. Oil Temp. 50°C Starting Pressure Eng. High Bar 345+26 Operating Pressure 100 EXCITER SHAFT SPEED (Drum drive gear = 3,2 Litres , Axle Reduction Gear =1,9 Litres Gear oil SAE 90, API GL5) Frequency Used 2 Rpm 1800 Hz L26 / H31 HZ VIBRATION MOTOR ( Engine Oil , Qty Oil Vibration Bearing SAE 15-W40 = 1,8 x 2 ) Leakage Oil Rate Eng. High Hyd. Oil Temp. 50°C L/Min Max. 1,5 STEERING SYSTEM Steering Pressure Idling Hyd. Oil Temp. 50°C Bar 175 +26 FINAL DRIVE (GO , Qty Oil Axle = 12,5 Litres , Wheel Hubs = 3,5 Litres x 2, Axle reduction gear =1,9 SAE 90EP API GL 5) Diff. Drain Plug Visual No excessive Replace With Another Plug Check Metalic Powder ELECTRICAL 2 Battery 12V Paralel 103A Electrical Function Function Check Normal Function TIRE 23.1-26/12 TL R3 Pressure 1,5 bar Tire Condition Visual Check Standard OPTIONAL