Professional Documents
Culture Documents
Engine data
Description
Engine code UEJB UEJE
Emission level Stage V Stage VI
Firing order 1-3-4-2
Bore 79.0 mm
Stroke 76.4 mm
Engine capacity 1498 cm³
Compression ratio 11:1
Power output 82 kW (112 PS) / 6300 rpm
Torque 140 Nm / 4400 rpm
Maximum permissible engine speed (continuous) 6450 rpm
Maximum permissible engine speed (intermittent) 6675 rpm
Idle speed 750 ± 100 rpm
Maximum oil consumption 0.5 l / 1000 km
Engine Oil
Viscosity Specification
SAE 5W-20 Material: WSS-M2C948-B (Engine Oil - SAE 5W-20)
SAE 5W-30 Material: WSS-M2C913-C (Engine Oil - SAE 5W-30)
Oil pressure
Description bar
Minimum oil pressure at an oil temperature of 80°C and an engine speed of 800 rpm 1.0
Minimum oil pressure at an oil temperature of 80°C and an engine speed of 2000 rpm 2.0
Pressure relief valve opening pressure 4 ± 0.4
Engine oil capacity
Description liter
Initial fill including oil filter 4.60
Service fill including oil filter 4.05
Service fill without oil filter 3.75
Valve clearances
Description mm
Valve clearance (engine cold), intake 0.14 - 0.23
Valve clearance (engine cold), exhaust 0.28 - 0.37
Cylinder head
Description mm
Maximum distortion (mating face) 0.05
Lubricants, Fluids, Sealers and Adhesives
Item Specification
Sealant, oil pan contact surface to oil seal carrier, Material: WSE-M4G323-A4 (Silicone Gasket and
oil pan to cylinder block, oil pan to oil pump Sealant / TA-30)
Sealant, camshaft bearing cap to cylinder head Material: WSK-M2G348-A5 (Gasket Maker / TA-16)
Material: - (Motorcraft® Metal Surface Prep /
Primer Front cover, Oil pan
ZC-31-B)
Material: ESE-M1C171-A (Silicone Brake Caliper
Silicone grease
Grease and Dielectric Compound / XG-3-A)
Torque Specifications
1 of 2 10/6/2016 12:59 AM
https://www.etis.ford.com/wsm/js/procedure.do?variantId=3050&proc...
2 of 2 10/6/2016 12:59 AM