Professional Documents
Culture Documents
Description Dimensions
The Studor Maxi-Vent Air Admittance Valve (AAV) Dimension Metric Imperial
is an accepted alternative to replace all forms of (mm) (inches)
conventional stack venting, utilising active air pres- A Ø 175 6
sure control, allowing the air to enter the system at B 1.4
the point of need. C 92 3
D 155 6
The Maxi-Vent admits air under condition of
E 17
reduced pressure in the discharge pipes and
F 84 3
prevent water seals in traps from being drawn; Aluminium Cover
G Ø 126 Ø4
thus contributing to the ventilation of the main
H 131 5
drain to which the discharge stacks incorporating
I Ø 83 3 ¼
the Maxi-Vent are connected.
J Ø 89 3 ½
Features K Ø 111 Ø4
• Screening on the inside and outside of the L 50 2
Maxi-Vent to protect the sealing membrane from M Ø 75 Ø2
foreign objects. N Ø 106 4
• Ability to divert condensation away from the Insulating Cap Note: Dimensions for reference only
sealing membrane.
• Prevents the release of foul air from the drainage Performance parameter
system. Temperature -40ºC to +60ºC (CE)
• Independently tested to verify operation from range -40ºF to +150ºF (ASSE)
-40ºC. Opening -70 Pa (-0.010 PSI)
• Available in white ABS. pressure
Max. pressure 10,000 Pa (1m/40” H2O)
Installation rating tightness at 0 Pa or higher
• The Maxi-Vent should be connected to the
piping in accordance with Studor‘s installation Air flow Branch Stack
instructions. capacity
• Refer to your local area regulations for open Europe 32 l/s 32 l/s
vent requirements. Maxi-Vent AU/NZ 32 l/s / 1728 FU 32 l/s / 125 FU
USA 1 to 160 DFU 72 to 500 DFU
Aluminium Cover (optional)
The Aluminium Cover provides protection to the Materials
Maxi-Vent when it is installed outside. It is provided Component Material
with an integral insulating cap and is secured in Aluminium cover Aluminium
place with adhesive tape. This provides insulation Insulating cover cap Polystyrene
against extreme temperatures (-40°C to +60°C) Maxi-Vent body ABS
and protection from animals/birds and the Connector Maxi-Vent membrane Synthetic rubber
environment, i.e. inclement weather and the sun’s Connector Rubber
ultra-violet rays. Pipe sizes
Europe AU/NZ USA
Warranty DN 75-110 DN 80-100 3“ - 4“
The Studor products have a 10 year warranty EN 12380 10
period. Visit www.studor.net for full details.
Akatherm BV t/a Aliaxis Technical Services Tel +44 1273 525 500 studor.info@aliaxis.com www.studor.net