Professional Documents
Culture Documents
Ntegra
Ntegra
Model: Ntegra
Multi Currency 1½pkt Desktop Banknote Counter / Sorter
User Guide
TP05413021 Interim
26 Aug. 2009 © Talaris Ltd.
THIS PAGE INTENTIONALLY LEFT BLANK
Ntegra
Model: Ntegra
Multi Currency 1½pkt Desktop Banknote
Counter / Sorter
User Guide
Wilbert Bieleman
Managing Director, International Distribution Business
Talaris Ltd.
Talaris Limited, Registered Office: Talaris House, Crockford Lane, Chineham Park, Basingstoke, Hampshire, RG24 8QZ, UK.
Registered in England & Wales. No: 6569621
Declaration of conformity
5 Functions ................................................................................................... 1 - 39
5.1 Supervisor Menu 1/2 ................................................................................. 1 - 39
5.1.1 Date & Time .............................................................................................. 1 - 39
5.1.2 1Printer ...................................................................................................... 1 - 40
5.1.3 Sound........................................................................................................ 1 - 41
5.1.4 Density Level............................................................................................. 1 - 42
5.1.5 ID Setting .................................................................................................. 1 - 42
5.1.6 End Of Day................................................................................................ 1 - 43
5.1.7 Language .................................................................................................. 1 - 44
5.1.8 Start Mode................................................................................................. 1 - 45
5.1.9 Counting Speed ........................................................................................ 1 - 45
5.2 Supervisor menu 2/2 ................................................................................. 1 - 45
5.2.1 Screen Saver ............................................................................................ 1 - 45
5.2.2 Information ................................................................................................ 1 - 46
Warning
The indication WARNING warns you of the possible danger of serious
physical injury.
Attention
The indication ATTENTION warns of the possible danger of minor
physical injury or damage to equipment.
Moving Parts
Extreme care must be taken when working near moving parts. This is
especially important when covers are open or removed and / or safety
interlock circuits are over-ridden.
Never allow tools, finger, hair or loose clothing near moving parts.
Danger to Hands
When closing the upper or middle parts of the Ntegra after removing
jammed notes, take extreme care. Fingers, or other parts of the body,
may be caught in the Counter and seriously damaged. Always check
that it is safe to close the Counter.
Electrical Shock
The indication warns of possible injuries through electrical shocks.
1 2 3
11
4
10
9
8 7 6
6 1
4 3
1 2 3 4 5 6
9 8 7
Display / Control Panel
1 Display For note count / value and other functions.
2 Batch Sets the batch size in pieces or value.
3 Function Enters the Ntegra set-up.
4 Escape / Clear To exit the set-up mode or clear counts.
5 Add To set the Ntegra to add consecutive counts / values.
6 Numeric keys For inputting values or selecting functions.
7 Print Starts print ( if fitted ) or sends ADD count / value to
Grand Total.
8 Enter ( Start/Stop ) Enters data to memory, and Starts/Stops the Ntegra
when in Manual mode.
9 Navigation Keys Quick select of currency, count mode, results and
denomination. Function navigation.
Lift the Upper Cover latch to open the Ntegra Upper Section for clearing note
jams.
Note Jams - Upper Section
Open the Ntegra Upper Section and remove any jammed notes, or part notes,
from the note path. Ensure the idler rollers are free to rotate.
Note Jams - Lower Section
Open the Ntegra Lower Section and remove any jammed notes, or part notes,
from the note path. Ensure that no part-notes are trapped in the note diverter
fingers.
Lower Upper
Upper CoverGap
Cover Rollers
Gap Rollers Heads
Magnetic Heads
Section Latch
Latch IR Array
IR Array
Latch
UVUV
Sensor
Sensor
Display Rollers
Rollers
Ntegra Upper Section
Clean the rubber gap rollers, idler rollers with a slightly damp cloth. You may use
a small amount of liquid soap on the cloth. Ensure all soap residue is removed
from the rollers. Allow to dry thoroughly before connecting the machine to the
mains electrical supply.
Clean the glass of the IR Array with a soft brush, then clean both the IR Array and
the UV Sensor with a damp lint-free cloth, followed by a dry lint-free cloth to finish.
Clean the magnetic detector heads carefully with a small soft brush. Avoid
applying pressure to the detector head, this may damage the head resulting in
loss of performance or an inability to function. If there is a build-up of dirt on the
Rollers
Press the “UP” navigation key to step through the available ( Ntegra model
dependant ) counting modes:
Count
Mixed
Single
Face
Orient
Serial
Fit
Bar
Press the LEFT navigation key to step through the currencies registered in the
Ntegra firmware.
Note:
Alternately, press the CENTRE key to display a list of all registered currencies.
Use the UP or DOWN navigation keys to move the arrow to the required currency.
Press the CENTRE key to select the currency.
Any different currency, including counterfeit suspect notes of the selected
currency will go to the reject pocket.
3.3.3 Denomination
When the ‘Single’ counting mode is selected, press the DOWN key to step
through the denomination values specific to the selected currency.
When the denomination DD is displayed, the Ntegra will read the value of the first
note, and expect all other notes to be of the same value. Anything different,
including suspect notes will go to the reject pocket.
Press the RIGHT navigation key to display the “Counting Result”. This table
shows the denomination value, the number of each denomination counted, the
value of the denomination and the totals in the count.
Press the RIGHT navigation key a second time to display the “Reject Reasons”.
The table lists 14 possible reasons for a note to have been rejected.
Note:
If no notes have been counted, only the Reject Reasons will be displayed.
Further presses of the RIGHT navigation key will toggle the display between the
Counting Result and the Reject Reasons.
Press the ESC/CLR key to return to, or place notes on the hopper to revert back
to the normal operational mode.
Note:
If the corresponding currency data table is not loaded in the Ntegra, all
notes will be sent to the reject pocket.
1Print
3.10 Key
If an Integral or external printer is fitted and enabled, pressing the PRINT key at
the end of a count will transmit the count data to the printer.
If the Ntegra is operating in the ADD mode, pressing the PRINT key will transfer
the count to the Grand Total, and if an Integral or external printer is fitted and
enabled, transmit the last count to the printer.
Note:
1 When the counted notes have been removed from the stacker.
2 When notes are present in the reject pocket.
3 When notes remain in the input hopper.
4 While a count is in progress.
Note:
Piece count may performed either with or without a batch setting, however, if no
batch is set, the count will stop when the stacker or reject pocket reaches full
capacity.
Using the “UP” navigation key, set the Ntegra in the “Count” mode.
If required, press the BATCH key to enable the batch limit. If a quantity other than
the default batch limit is required, enter the batch limit using the numeric keys,
followed by the ENTER key.
Select AUTO or MANUAL start mode.
Place the notes to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra
in the MANUAL mode, press the START/STOP key to commence the count.
The Ntegra will count the notes, and display the total.
If the batch ( or reject pocket ) limit is reached, the Ntegra will stop. Remove the
notes from the full pocket. If AUTO was selected, the Ntegra will re-start
automatically. If MANUAL was selected, press the START/STOP key to re-
commence the count.
Once the count is complete, and all notes are removed from the pockets, if an
Integral or external printer is fitted and enabled, pressing the PRINT key will
transmit the count data to the printer.
Any notes rejected are not included in the count. The number of notes rejected is
shown on the display. press the RIGHT navigation key to see the reason the
notes were rejected.
Note:
To clear the Grand Total press either the centre navigation key, or the ENTER
key.
Press the 2 key on the numeric keys will immediately clear the Grand Total.
Press the 3 key on the numeric keys to return to the count display.
If the batch ( or reject pocket ) limit is reached, the Ntegra will stop. remove the
notes from the full pocket. If AUTO was selected, the Ntegra will re-start
automatically. If MANUAL was selected, press the START/STOP key to re-
commence the count.
If the stacker is emptied at less than a complete batch, a caution will be shown on
the display. Press either the centre navigation key, or the ENTER key to clear the
caution message.
To confirm the count, press the RIGHT navigation key to display the “Counting
Result”. This table shows the denomination value, the number of each
denomination counted, the value of the denomination and the totals in the count.
Once the count is complete, and all notes are removed from the pockets, if an
Integral or external printer is fitted and enabled, pressing the PRINT key will
transmit the count data to the printer.
Place the next notes to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra
in the MANUAL mode, press the START/STOP key to commence the count.
Press the PRINT key to transfer the count value to the Grand Total.
Printing and Clearing The Grand Total
To clear the Grand Total ( with the stacker empty ), or If the notes have been
incorrectly removed from the stacker, pressing the PRINT key will bring up the
following display:
Note:
To clear the Grand Total press either the centre navigation key, or the ENTER
key.
Press the 2 key on the numeric keys will immediately clear the Grand Total.
Press the 3 key on the numeric keys to return to the count display.
If the batch ( or reject pocket ) limit is reached, the Ntegra will stop. remove the
notes from the full pocket. If AUTO was selected, the Ntegra will re-start
automatically. If MANUAL was selected, press the START/STOP key to re-
commence the count.
If the stacker is emptied at less than a complete batch, a caution will be shown on
the display. Press either the centre navigation key, or the ENTER key to clear the
caution message.
To confirm the count, press the RIGHT navigation key to display the “Counting
Result”. This table shows the denomination value, the number of each
denomination counted, the value of the denomination and the totals in the count.
Once the count is complete, and all notes are removed from the pockets, if an
Integral or external printer is fitted and enabled, pressing the PRINT key will
transmit the count data to the printer.
Pressing 1 on the numeric keys will bring up the following display, with the pointer
position on the ‘YES’ button:
Note:
To clear the Grand Total press either the centre navigation key, or the ENTER
key.
Press the 2 key on the numeric keys will immediately clear the Grand Total.
Press the 3 key on the numeric keys to return to the count display.
If the batch ( or reject pocket ) limit is reached, the Ntegra will stop. remove the
notes from the full pocket. If AUTO was selected, the Ntegra will re-start
automatically. If MANUAL was selected, press the START/STOP key to re-
commence the count.
If the stacker is emptied at less than a complete batch, a caution will be shown on
the display. Press either the centre navigation key, or the ENTER key to clear the
caution message.
Once the count is complete, and all notes are removed from the pockets, if an
Integral or external printer is fitted and enabled, pressing the PRINT key will
transmit the count data to the printer.
Any notes rejected are not included in the count. The number of notes rejected is
shown on the display. Press the RIGHT navigation key to see the reason the
notes were rejected.
Note:
To clear the Grand Total press either the centre navigation key, or the ENTER
key.
Press the 2 key on the numeric keys will immediately clear the Grand Total.
Press the 3 key on the numeric keys to return to the count display.
If the batch ( or reject pocket ) limit is reached, the Ntegra will stop. remove the
notes from the full pocket. If AUTO was selected, the Ntegra will re-start
automatically. If MANUAL was selected, press the START/STOP key to re-
commence the count.
If the stacker is emptied at less than a complete batch, a caution will be shown on
the display. Press either the centre navigation key, or the ENTER key to clear the
caution message.
To confirm the count, press the RIGHT navigation key to display the “Counting
Result”. This table shows the denomination value, the number of each
denomination counted, the value of the denomination and the totals in the count.
Once the count is complete, and all notes are removed from the pockets, if an
Integral or external printer is fitted and enabled, pressing the PRINT key will
transmit the count data to the printer.
Pressing 1 on the numeric keys will bring up the following display, with the pointer
position on the ‘YES’ button:
Note:
To clear the Grand Total press either the centre navigation key, or the ENTER
key.
Press the 2 key on the numeric keys will immediately clear the Grand Total.
Press the 3 key on the numeric keys to return to the count display.
If the batch ( or reject pocket ) limit is reached, the Ntegra will stop. remove the
notes from the full pocket. If AUTO was selected, the Ntegra will re-start
automatically. If MANUAL was selected, press the START/STOP key to re-
commence the count.
If the stacker is emptied at less than a complete batch, a caution will be shown on
the display. Press either the centre navigation key, or the ENTER key to clear the
caution message.
Once the count is complete, and all notes are removed from the pockets, if an
Integral or external printer is fitted and enabled, pressing the PRINT key will
transmit the count data to the printer.
Any notes rejected are not included in the count. The number of notes rejected is
shown on the display. Press the RIGHT navigation key to see the reason the
notes were rejected.
Note:
To clear the Grand Total press either the centre navigation key, or the ENTER
key.
Press the 2 key on the numeric keys will immediately clear the Grand Total.
Press the 3 key on the numeric keys to return to the count display.
Note:
Page 1/2 listing is model / option dependent, and may vary from that
shown above.
Use the RIGHT navigation keys to move between menu 1/2 and menu 2/2.
Use the LEFT navigation keys to move between menu 2/2 and menu 1/2.
From either main feature menu, press the ESC/CLR key to exit the Supervisor
Set-Up menus.
Press the 1 key on the numeric keys to toggle the Integral printer between manual
printing ( PRINT key press required to initiate printing ), and automatic printing.
Press the 2 key on the numeric keys to toggle the Integral printer ON or OFF.
Press the 3 key on the numeric keys to toggle the external printer ON or OFF.
Note:
When the external printer is set ON ( enabled ), options 4, 5, 6 and 7 may be used
( press the appropriate key to step between available settings ) to set the
communication parameters to suit the external printer being used.
Note:
Press the DOWN navigation key to switch all system sounds OFF.
Press the UP navigation key to switch all system sounds ON.
Press the RIGHT navigation key to increase the volume of all systems sounds.
Press the LEFT navigation key to decrease the volume of all systems sounds.
When all required system sound adjustments have been made, either press the
ENTER key or the CENTRE navigation key to store the settings.
Play Sound
This feature is used to play/test the individual system sounds.
To enter the Play Sound feature, press the 2 key on the numeric keys.
Press the key on the numeric keys appropriate to the system sound to be played.
Note:
All other keys, if pressed, will initiate the ‘Click’ system sound.
Note:
In ‘Mixed’ count mode, the acceptance of certain darker coloured note may
be affected by the density level setting.
To enter the Density feature, press the 4 key on the numeric keys.
Press the RIGHT navigation key to lower the density level at which a note will be
determined to be a double.
Press the LEFT navigation key to raise the density level at which a note will be
determined to be a double.
5.1.5 ID Setting
This feature allows the Ntegra to given a unique numeric identification ( ID )
number, up to six ( 6 ) characters in length.
Using the numeric keys, enter the required ID number. Press the ENTER key to
store the ID number to memory.
To remove an ID number, enter the ID Setting feature and press the ENTER key
with the display blank.
5.1.6 End Of Day
This feature allows the User to view or print ( if a printer is installed and enabled )
currency totals stored in memory.
To enter the End Of Day feature, press the 6 key on the numeric keys.
The display will initially show the current day and currency totals.
Date
An arrow to the side of the date will indicate that data is stored for additional
dates. Press the appropriate navigation key ( LEFT or RIGHT ) to access the
data for other dates.
Currency
A totals table is available for all registered currencies.
Note:
Clearing Totals
Press the BATCH key to enter the totals clearing function.
A sub-menu will be displayed.
To clear the total for the current date, for the displayed currency only, press the 1
key on the numeric keys.
To clear all the totals in memory, press the 2 key on the numeric keys.
If this function has been entered in error, and no total are to be cleared, either
press the 3 key on the numeric keys, or press the ESC/CLR key to exit.
5.1.7 Language
This feature allows the Ntegra to be set to operate in other languages ( dependant
upon installed languages ). If a printer is installed and enabled, the print-out will
use the selected language.
To enter the Language feature, press the 7 key on the numeric keys.
Press the key on the numeric keys appropriate to the required language.
Counting Speeds
Operating Available Operating Available
Mode Speeds Mode Speeds
Count 1000 npm Orient 1000 npm
1200 npm 1200 npm
1300 npm Fit 600 npm
1500 npm 700 npm
Mix 1000 npm 800 npm
1200 npm Serial 500 npm
Single 1000 npm Bar 1000 npm
1200 npm 1200 npm
Face 1000 npm 1300 npm
1200 npm 1500 npm
Note:
Press the 1 key on the numeric keys to toggle the Screen Saver ON or OFF.
When the screen saver is enabled ( ON ), press the 2 key on the numeric keys to
step through the available delay times. The available delays times are:
5 sec
30 sec
1 min
5 min
10 min
20 min
30 min
Press the 3 key on the numeric keys to toggle between the DEFAULT and USER
screen saver image.
Press the ENTER key to save the new setting and exit to the Supervisor menu.
5.2.2 Information
This feature displays the Ntegra ID number ( if set ), firmware loaded, and the
note count.
To enter the Information feature, press the 2 key on the numeric keys.
Place the next notes to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra
in the MANUAL mode, press the START/STOP key to commence the count.
Press the PRINT key to transfer the count value to the Grand Total. The Grand
Total and the note serial number will transmit to the printer
Clearing The Grand Total
To clear the Grand Total ( with the stacker empty ), or If the notes have been
incorrectly removed from the stacker, pressing the PRINT key will bring up the
following display:
Note:
To clear the Grand Total press either the centre navigation key, or the ENTER
key.
Press the 2 key on the numeric keys will immediately clear the Grand Total.
Press the 3 key on the numeric keys to return to the count display.
Use the UP or DOWN navigation keys to move the arrow to the “BAR” currency.
Press the CENTRE key to select the BAR currency.
The currency name and symbol will change on the screen to indicate the BAR
code reader is selected.
All detectors will be automatically disabled when BAR is selected.
Using the “UP” navigation key, set the Ntegra in the “Read” mode.
Note:
The COUNT mode can be used with BAR selected; in which case the
Ntegra will count the number of documents processed, but NOT read the
bar code.
If required, press the BATCH key to enable the batch limit in quantity of tickets. If
a batch quantity, other than the default batch limit is required, enter the batch limit
using the numeric keys, followed by the ENTER key.
Select AUTO or MANUAL start mode.
Place the tickets to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as tickets are placed on the input hopper. With the
Ntegra in the MANUAL mode, press the START/STOP key to commence the
count.
Plug the other end of the interface cable into the C/D port on the rear of the
Ntegra.
Count totals and values shown on the Ntegra display will also be shown on the
Remote Display; count total on the top line, and the value total shown on the
bottom line.
The data shown on the Remote display can be cleared ( blanked ) by pressing the
Clear button on the top of the Remote display.
Miss-Feeding Miss-Feeding
Jam 1
Jam 1-2
Jam 2
Jam 2-3
Jam 3
Stacker Full The Ntegra recovers when notes in the stacker is removed
Reject Full The Ntegra recovers when notes in the reject pocket is removed