Professional Documents
Culture Documents
TALARIS Ltd.
Talaris House
Crockford Lane, Chineham Park
Basingstoke, Hampshire
RG24 8QZ, UK
TP11413001 REV 04
6 Jul 2009 © Talaris Ltd
Printed in USA ALL RIGHTS RESERVED
Model EV86XX Currency Counting Machine
- ii - TP11413001 REV 04
Contents
Model EV86XX Currency Counting Machine
TABLE OF CONTENTS
Section Page
IPL:1 Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IPL:2 Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
IPL:3 Left Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
IPL:4 Right Side .................................. 8
IPL:5 Belts & Pulleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
IPL:6 Nudger Shaft Assembly . . . . . . . . . . . . . . . . . . . . . . . 12
IPL:7 Stripper Shaft Assembly . . . . . . . . . . . . . . . . . . . . . . 14
IPL:8 Transport Shaft Assembly . . . . . . . . . . . . . . . . . . . . . 16
IPL:9 Stacker Shaft Assembly . . . . . . . . . . . . . . . . . . . . . . . 18
IPL:10 MDD™ Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
IPL:11 Separator Assembly ( Early ) . . . . . . . . . . . . . . . . . . . 22
IPL:12 Separator Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 24
IPL:13 Adjuster Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
IPL:14 Stacker Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
IPL:15 Motors ( non - SMDS Models ) . . . . . . . . . . . . . . . . . . 30
IPL:16 Motors ( SMDS Models ) . . . . . . . . . . . . . . . . . . . . . . . 32
IPL:17 Rear Plate Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 34
IPL:18 EV8626 Display Assembly . . . . . . . . . . . . . . . . . . . . . 36
IPL:19 EV8650 Display Assembly . . . . . . . . . . . . . . . . . . . . . 38
IPL:20 Main Control PCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
IPL:21 Detector Box, EV8626 . . . . . . . . . . . . . . . . . . . . . . . . . 42
IPL:22 Detector Box, EV8650 STD . . . . . . . . . . . . . . . . . . . . . 44
IPL:23 Detector Box, EV8650 SD . . . . . . . . . . . . . . . . . . . . . . 46
IPL:24 Detector Box, EV8650 UV . . . . . . . . . . . . . . . . . . . . . . 48
IPL:25 Detector Box, EV8650 SDUV . . . . . . . . . . . . . . . . . . . 50
IPL:26 Detector Box, EV8650 SDUVPPDEMG . . . . . . . . . . . . 52
- iv - TP11413001 REV 04
Contents
Model EV86XX Currency Counting Machine
Introduction
This document contains the exploded views and replacement parts for serviceable
equipment. Each serviceable part is identified by reference number. Some parts shown
disassembled may not be sold separately, but may be included in the complete unit or next
higher assembly. All illustrations and part numbes shown or described in this Illustrated
Parts Manual are based on the latest information available at the time of printing.
Talaris reserves the right to make changes at any time without prior notice. The information
contained herein is prorietary and is not to be used for purposes other than as an aid in the
operation and/or maintenance of the equipment desribed herein and is further not to be
released or reproduced without the written permission of Talaris.
Abreviations
Ay Assembly Assy Assembly
Blk Ox Black Oxide Cblfm Cableform
CSK Countersunk EDD Elastic Disk Drive
FRU Field Replaceable Unit HHCS Hex Head Cap Screw
HTS High Tensile Steel JHMS Jackson Head Machine Screw
mm Millimeters MS Machine Screw
n/s not shown PCB Printed Circuit Board
PCBP Printed Circuit Board PFHMS Philips Flat Head Machine Screw
PPHMS Philips Pan Head Machine Screw PRHMS Philips Round Head Machine Screw
PSU Power Supply Unit PTHMS Philips Truss Head Machine Screw
SBHCS Socket Button Head Cap Screw SEMS Screw or bolt with captive washer
SHCS Socket Head Cap Screw Skt Socket
SS Stainless Steel STAP Self Tapping
TBHMS Torx Button Head Machine Screw TFHS Torx Flat Head Screw
UAR Use As Required ZCEP Mild Steel Zinc Clear Electroplate
Ordering Parts
When ordering parts, please remember to provide the following:
• Full model number
• Serial number
TP11413001 REV 04 1
Illustrated Parts
Model EV86XX Currency Counting Machine
IPL:1 Covers
U
T
P
R
O
S
N
2 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
IPL:1 Covers
Item # Note Qty Type Description Part Number
Notes:
1. Single Comms port
2. No comms port
3. Use on all 8650 Models, and 8626 USA Models.
4. Use on all 8626 Models except USA Models.
5. All screws are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
6. Dual Comms port.
7. Cover with fitted Keypad Label.
8. Used on EV8650 3D models only.
TP11413001 REV 04 3
Illustrated Parts
Model EV86XX Currency Counting Machine
IPL:2 Handle
eNQ
4 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
IPL:2 Handle
Item # Note Qty Type Description Part Number
Note:
1. All screws are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
TP11413001 REV 04 5
Illustrated Parts
Model EV86XX Currency Counting Machine
S
R
eP
O
eNR
eR
Q
P
eNS
N
eNN
eR
eP
eNT
eNM
6 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All screws and washers are available in the Hardware Kit - 2603600102. See IPL:41, Hardware
Kit Replenishment, for ordering kit replenishment parts.
2. Use on all EV86 with metal Latch Blocks and Adjuster Shaft with metal ends.
3. Use on all EV86 with ‘moulded’ Latch Blocks and Adjuster Shaft with ‘moulded’ ends.
TP11413001 REV 04 7
Illustrated Parts
Model EV86XX Currency Counting Machine
eNN
eN
eNM
eNT
Q
P
eR
N
eR
eNR
jP
8 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All screws and washers are available in the Hardware Kit - 2603600102. See IPL:41, Hardware
Kit Replenishment, for ordering kit replenishment parts.
2. Use on all EV86 with metal Latch Blocks and metal Adjuster Shaft.
3. Use on all EV86 with ‘moulded’ Latch Blocks and Adjuster Shaft.
TP11413001 REV 04 9
Illustrated Parts
Model EV86XX Currency Counting Machine
O
N P
_R
_P
_S
_Q Q
_O
10 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
kçíÉW
1. All belts and O-rings are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
2. Used on Model FT86500351 UVDDC (Central Africa) only.
3. These are wear parts and are not covered by warranty unless there is a manufacturing fault
TP11413001 REV 04 11
Illustrated Parts
Model EV86XX Currency Counting Machine
eOS
eON
O
P
Q eOS
12 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All washers are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
2. Flat washer only fitted to ‘early’ production EV86 Counters.
3. These are wear parts and are not covered by warranty unless there is a manufacturing fault
TP11413001 REV 04 13
Illustrated Parts
Model EV86XX Currency Counting Machine
eOS
eON
O eOS
14 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All washers are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
2. Flat washer only fitted to ‘early’ production EV86 Counters.
3. These are wear parts and are not covered by warranty unless there is a manufacturing fault
TP11413001 REV 04 15
Illustrated Parts
Model EV86XX Currency Counting Machine
3
H26
H21
1
2
H26
16 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All washers are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
2. Flat washer only fitted to ‘early’ production EV86 Counters.
3. These are wear parts and are not covered by warranty unless there is a manufacturing fault
4. Used only on ‘Twin Mag’ variants.
TP11413001 REV 04 17
Illustrated Parts
Model EV86XX Currency Counting Machine
eOT
eOO
N
P
eOT
18 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Note:
1. All washers and circlips are available in the Hardware Kit - 2603600102. See IPL:41, Hardware
Kit Replenishment, for ordering kit replenishment parts.
TP11413001 REV 04 19
Illustrated Parts
Model EV86XX Currency Counting Machine
eQ
eOM
O
N
S
eP
R
P
Q
20 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All screws and washers are available in the Hardware Kit - 2603600102. See IPL:41, Hardware
Kit Replenishment, for ordering kit replenishment parts.
2. Used on all €€EV8650 SMDS variants.
3. Cannot be used on SMDS variants.
TP11413001 REV 04 21
Illustrated Parts
Model EV86XX Currency Counting Machine
Q 11 T jT jS eNN eOV
V oÉ~ê=sáÉï
P eQ
NM
U
eOLeU eNO
R N cêçåí=sáÉï O S eNO
22 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All screws, nuts, and small springs are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. When replacing early ‘narrow’ bearings, replace both bearings at the same time with appropriate
Trailing Arm Assembly Wide.
3. Grub Screw H2 is replaced by Set Screw H8 in EV86 manufactured after Jan 2008.
4. For use on EV86 SMDS variants only.
5. These are wear parts and are not covered by warranty unless there is a manufacturing fault.
6. Used EV86 manufactured through November 2008.
TP11413001 REV 04 23
Illustrated Parts
Model EV86XX Currency Counting Machine
4 11 H8 2 10 H12
5 Front View 6
H12 1 M7 7
H4
Rear View
3 8 9 M6 H24 H29
24 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All screws, nuts, and small springs are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. When replacing early ‘narrow’ bearings, replace both bearings at the same time with appropriate
Trailing Arm Assembly Wide.
3. For use on EV86 SMDS variants only.
4. These are wear parts and are not covered by warranty unless there is a manufacturing fault
TP11413001 REV 04 25
Illustrated Parts
Model EV86XX Currency Counting Machine
eOU
Q
P
26 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All circlips are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
2. Use on all EV86 with metal Latch Blocks.
3. Use on all EV86 with ‘moulded’ Latch Blocks.
TP11413001 REV 04 27
Illustrated Parts
Model EV86XX Currency Counting Machine
eP
28 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Note:
1. All screws are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
2. Used on models FT86500351 and FT86500391 only.
TP11413001 REV 04 29
Illustrated Parts
Model EV86XX Currency Counting Machine
eT
S
N
O
Q
eNN
eNM
eU
30 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All screws are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
2. Used only on EV86 models with magnetic detection ( EV8626MG / EV8650EMG ).
TP11413001 REV 04 31
Illustrated Parts
Model EV86XX Currency Counting Machine
eT
P
T S
O
eNM
eU eNN R Q
32 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All screws are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
2. Used only on EV86 models with magnetic detection ( EV8626MG / EV8650EMG ).
TP11413001 REV 04 33
Illustrated Parts
Model EV86XX Currency Counting Machine
eNO eNU
N
S
eNN
R
eR
34 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All screws and washers are available in the Hardware Kit - 2603600102. See IPL:41, Hardware
Kit Replenishment, for ordering kit replenishment parts.
2. Located under PSU Shield.
TP11413001 REV 04 35
Illustrated Parts
Model EV86XX Currency Counting Machine
eT Q
36 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All screws are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
2. Only available pre-fitted to front cover assembly.
TP11413001 REV 04 37
Illustrated Parts
Model EV86XX Currency Counting Machine
eT
Q
38 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All screws are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
2. Only available pre-fitted to front cover assembly.
TP11413001 REV 04 39
Illustrated Parts
Model EV86XX Currency Counting Machine
eNO
N
40 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Note:
1. All screws are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
TP11413001 REV 04 41
Illustrated Parts
Model EV86XX Currency Counting Machine
eNO
42 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All nuts, screws, washers, etc are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. Used to secure detector box pivot.
TP11413001 REV 04 43
Illustrated Parts
Model EV86XX Currency Counting Machine
2 1 6
H12
H27
H3
5 3
44 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All nuts, screws, washers, etc are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. Used to secure detector box pivot.
3. Used on North American 8650 models.
TP11413001 REV 04 45
Illustrated Parts
Model EV86XX Currency Counting Machine
R
N eOV eOQ
eNO
cO
eNT eOT eOO eOT
eP
jP
Q cN P
46 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All nuts, screws, washers, etc are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. Used to secure detector box pivot.
3. Used on North American 8650 models.
TP11413001 REV 04 47
Illustrated Parts
Model EV86XX Currency Counting Machine
T
N eOV eOQ
eNO
R eOV eOQ
S
eNT cN eOT eOO eOT
eP
jP
Q cO P
48 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All nuts, screws, washers, etc are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. Used to secure detector box pivot.
TP11413001 REV 04 49
Illustrated Parts
Model EV86XX Currency Counting Machine
R
N eOV eOQ
eNO
cO
eOT eOO eOT
eNT
eP
jP
Q cN P
50 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All nuts, screws, washers, etc are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. Used to secure detector box pivot.
3. Used on North American 8650 models.
TP11413001 REV 04 51
Illustrated Parts
Model EV86XX Currency Counting Machine
N eOV eOQ T
eNO
R eOV eOQ
S
cO eOT eOO eOT
eNT
eP
jP
Q cN P
52 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All nuts, screws, washers, etc are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. Used to secure detector box pivot.
TP11413001 REV 04 53
Illustrated Parts
Model EV86XX Currency Counting Machine
O N eOV eOQ NM
eOQ
R
eOV
eOT
eNO
eNT eOO
eP S
cO NN
T
Q cN
54 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. Used on Model EV8650 SDUV only.
2. All nuts, screws, washers, etc. are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
3. Used to secure detector box pivot.
4. Used on both Models EV8650 SDUVEMG and SDUVPPDEMG ( including DDC Models ).
TP11413001 REV 04 55
Illustrated Parts
Model EV86XX Currency Counting Machine
R N eOQ eOV U
O
NM
eOT
eNO
eOO
eNT S
eP
cO
V
T
Q cN
56 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All nuts, screws, washers, nuts etc. are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. Used to secure detector box pivot.
3. Used on North American 8650 models.
4. Used on both Models EV8650 UVEMG and UVPPDEMG ( including DDC Models ).
TP11413001 REV 04 57
Illustrated Parts
Model EV86XX Currency Counting Machine
NM O N eOV eOQ
eNO eOT
eOT
eOV
cP T
cN P
eP
U jP
Q S
eV V
58 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All nuts, screws, washers, nuts etc. are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. Used to secure detector box pivot.
TP11413001 REV 04 59
Illustrated Parts
Model EV86XX Currency Counting Machine
NM O N eOV eOQ
eNO
eOT
eOT
eOV
eNT
eOQ eOO
eT
cP
T
cN P
eP
U jP
Q S
eV V
60 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All nuts, screws, washers, nuts etc. are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. Used to secure detector box pivot.
3. Used on Eiv+.
4. Used on MC5 & MC6.
5. Includes the SD PCB.
TP11413001 REV 04 61
Illustrated Parts
Model EV86XX Currency Counting Machine
O N
V
eNO
U U
eOT
eNT
cO eOO
cN eP
P jP
eOV
T
eOQ
Q
R S
62 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All nuts, screws, washers, nuts etc. are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. Used to secure detector box pivot.
TP11413001 REV 04 63
Illustrated Parts
Model EV86XX Currency Counting Machine
N O
V
eNO eOT
eOV eOQ
eOT eOO
eNT
eP
P
jP
U
Q
eOV
NN
eOQ
NM
R
S T
64 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All nuts, screws, washers, nuts etc. are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. Used to secure detector box pivot.
3. 8660 Detector, Cables and Mounts usage is variable dependant upon detector arrangement
within EV8650 models.
TP11413001 REV 04 65
Illustrated Parts
Model EV86XX Currency Counting Machine
eNO
eNT
eOT
eOO
eOT
eT
eNT
eNO
66 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. All nuts, screws, washers, nuts etc. are available in the Hardware Kit - 2603600102. See IPL:41,
Hardware Kit Replenishment, for ordering kit replenishment parts.
2. Used to secure detector box pivot.
TP11413001 REV 04 67
Illustrated Parts
Model EV86XX Currency Counting Machine
pa=fååÉê=dìáÇÉ
Q P
jdLbjd=fååÉê=dìáÇÉ
68 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
1 1 A SD Flexi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2609600905
2 1 B Cable Assy, SD . . . . . . . . . . . . . . . . . . . . . . . . . 2606601702
3 1 A EMG Guide Finger Spares . . . . . . . . . . . . . . . . . 2603600701
4 1 EMG Guide Finger ( N Am ) . . . . . . . . . . . . . . . . . . . . . . . . . .
H3 1 2 -- Screw, M3x8, STAP for Metal . . . . . . . . . . . . . . . . See Note
H14 1 2 -- Screw, 3x8, Self-tap for Plastic. . . . . . . . . . . . . . . . See Note
Note:
1. All screws are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
TP11413001 REV 04 69
Illustrated Parts
Model EV86XX Currency Counting Machine
70 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Note:
1. All screws are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
TP11413001 REV 04 71
Illustrated Parts
Model EV86XX Currency Counting Machine
72 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Note:
1. All screws are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
2. 8660 Illumination assembly usage is variable dependant upon detector arrangement within
EV8650 models.
TP11413001 REV 04 73
Illustrated Parts
Model EV86XX Currency Counting Machine
74 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Note:
1. All screws are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
2. Not fitted to EV86 Counters manufactured prior to May 2007.
TP11413001 REV 04 75
Illustrated Parts
Model EV86XX Currency Counting Machine
R P
oÉ~ê=sáÉï
cêçåí=sáÉï
Q N
76 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. Select this cable assembly for all EV8650 fitted with both MTD and EMG detectors.
2. All nuts and stand-offs are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
TP11413001 REV 04 77
Illustrated Parts
Model EV86XX Currency Counting Machine
78 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Notes:
1. MTD models produced after January 2009 are equipped with the MTD Stacker Tray. Refer to
IPL:38 items 2 - 5 for additional MTD parts and cables.
2. All nuts and washers are available in the Hardware Kit - 2603600102. See IPL:41, Hardware Kit
Replenishment, for ordering kit replenishment parts.
TP11413001 REV 04 79
Illustrated Parts
Model EV86XX Currency Counting Machine
IPL:40 Miscellaneous
S
N
R
P
O
80 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
IPL:40 Miscellaneous
Item # Notes Qty Type Description Part Number
TP11413001 REV 04 81
Illustrated Parts
Model EV86XX Currency Counting Machine
82 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
TP11413001 REV 04 83
Illustrated Parts
Model EV86XX Currency Counting Machine
84 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
TP11413001 REV 04 85
Illustrated Parts
Model EV86XX Currency Counting Machine
86 TP11413001 REV 04
Illustrated Parts
Model EV86XX Currency Counting Machine
Note:
1. Printed copy not available. Electronic copy available on User Guide CD for local reproduction.
TP11413001 REV 04 87
Illustrated Parts
Model EV86XX Currency Counting Machine
88 TP11413001 REV 04
Illustrated Parts
Page Intentionally Left Blank
.