Professional Documents
Culture Documents
Chipper CH 380 HF
2 –Plate Disc
Rotor
Adjustable knives
situated at 90
degrees from each
other. The knives
lapped at inner and
outher circle and
feeding at an angle
will reduce the
power demand
The mounting of
feeding device is
steady
Strong springs at both sides of
rollers to press upper roller
against the wood.
Heavy duty double
roller bearings at rotor
are easy to greas from
outside.
Lower feeding
roll motor:
OMR 375
The chips lenght can be adjusted
exactly by bolts
Anvil adjusting
and locking
One adjusting
bolt is located
at the bottom
As standard:
hydraulic pump unit with 2
pumps, hand and pedal
control for hydraulic feeding Vizor control
device, lever control for
vizor and dicharge chute
rotation
Discharge chute to
transport position
Lock up for
Twig breaker
Discharge chute
rotation
A lever to control the
discharge chute rotation and
the turning of vizor
Switch to
choose
either hand
Adjustable No-Stress or pedal
control control
1. Cutting
2. Breaking the chip
4. 1. + 2. 3. Add. blades for
cutting sticks
1. + 2. 4. Twig breaker for
finilizing the chips
quality
• Three fingered blade
3. and twig breaker =
better crushing
• Effective discharge
blow
Fingered twig Upper housing
breaker can be opened by
a loader grapple
A lever to change
between 1 or 2 pumps
Hydraulic double pump unit as
standard (when driven by 540 PTO rpm
then both pumps have to be used)
• Tank volyme 80 l
• All the functions operated by an own
hydraulic tank unit
An effective conveyer
feed as acessory