You are on page 1of 2

Specification Sheet 1

SPD910 Differential Air Pressure Switch

Features
• Easy to install
• User friendly snap cover
• Case geometry allows easy cable lead-in
• Cable strain relief integrated in PG11 (DIN 40430)
• High adjustment accuracy through individual laser etched scale
• Long-term stability of switching points through trapezoidal bead
diaphragm
• Multi-layer gold plated contact

Product Description
This series of four SPD910 differential air flow switches are intended
for use in air handling systems for the monitoring of air ducts, filters
and fans.
The enclosure is plastic with a rating of IP54. A set-point adjustment is
provided under the clip-on clear plastic cover.
Supplied complete with mounting adaptor ring, two straight duct
probes and 2 metre (6.56 feet) length clear tubing.

Available Products
Part Number Model Number Description Pressure Range
004701060 SPD910-300Pa Air Differential Pressure Switch 20 ... 300 Pa (0.08 ... 0.12 in. W.C)
004701070 SPD910-500Pa Air Differential Pressure Switch 50 ... 500 Pa (0.2 ... 2.0 in. W.C)
004701080 SPD910-1000Pa Air Differential Pressure Switch 100 ... 1000 Pa (0.4 ... 4.0 in. W.C)
004701090 SPD910-2000Pa Air Differential Pressure Switch 500 ... 2000 Pa (2.0 ... 8.0 in. W.C)

Specifications
Medium Air and neutral gases Electrical connection Screw terminals
Cable gland type PG11 (DIN
Pressure range See Available Products table
40430)
Set-point scale Pa complete with cable strain
relief
Tolerable overload on one side 5000 Pa at -30 … +85 °C
20 in. W.C at -22 … +185 °F Switch contact type SPDT (change-over)
Repeatability SPD910-300Pa ±2.5 Pa (0.01 in. W.C) Protection Without cover IP 00
standard
SPD910-500Pa ±5 Pa (0.02 in. W.C) With cover IP 54
SPD910-1000Pa ±5 Pa (0.02 in. W.C) Pressure connections Pipe Ø 6.2 mm
SPD910-2000Pa ±5 Pa (0.02 in. W.C) Tests/admissions Electromagnetic
compatibility:
Switching load Resistive load 5 A at 250 Vac CE conformity according to
4 A at 30 Vdc EN 60730-2-6: 20081
Inductive 0.8 A at 250 Vac EU conformity:
0.7 A at 30 Vdc Low voltage directive
2014/35/EU
Materials in contact with the Case: PC 10% GF Gas appliance directive:
medium Cover: PC 2009/142/EC
Diaphragm: Silicone LSR Pressure sensing devices
tempered 200 °C, free of gas for gas burners and gas
emissions burning appliances:
Operating Medium/ambient -30 … +85 °C (-22 … +185 °F) EN 1854:2010
temperature EU directive on RoHS:
Storage -40 … +85 °C (-40 … +185 °F) 2011/65/EU
Service life Mechanical > 106 switching
cycles 1. The CE mark indicates RoHS2 compliance. Please refer to the CE Declaration
of Conformity for additional details.
Specification Sheet SPD910 2

Dimensions mm (in.)
91.4 (3.60)

22 (0.87) 51 (2.01)
6 (0.24)

6.2 (0.24) 3.4 (0.13)

78.5 (3.09)
52 (2.05)

P2 16 (0.63)

60 (2.36)
44.4 (1.75)

25 (0.98)

18 (0.71)
P1
6.5 (0.26) 8 (0.32)
9.1 (0.36)
3.4 (0.13)

16 (0.63)

2.2 (0.09)
*
49.7
(1.96

*Hole for PT screws KA25


)

)
0.18
4.5 (
80.8 (3.18)

4.
5

53.7 (2.11)
88 (3.46)

(0

56 (2.20)
65 (2.56)
.1
8)

15.5º

)
(2.11
53.7

4 x hole PT - screw d1 = 3.0 mm (0.12 in.)

Functions
The pressure switch has two separate pressure chambers, each with
its own connection. The change-over switch operates according to the
user defined set-point and type of monitoring application required.
Normally closed, the switch contact is made across terminals 1 and
2, whilst normally open the switch contact is made across terminals 1
and 3.

Vacuum Monitoring
© 2016 Schneider Electric. All rights reserved.

Connect the pressure switch via P2. Do not connect P1. Leave P1
open. Make sure that dirt can not get into P1.

High Pressure Monitoring


Connect the pressure switch via P1. Do not Connect P2. Leave P2
open. Make sure that dirt can not get into P2.

Filter Monitoring
Connect P1 before the filter and P2 after it.

Fan Monitoring
Connect P1 after the fan (in air flow direction) and P2 before the fan.

Schneider Electric Field Devices USA: Rockford, IL 888-444-1311 Europe: Malmö, Sweden +46 40 38 68 50 Asia Pacific: Hong Kong +862 2980 8688 www.schneider-electric.com
F-27918-1 January 2016 nk

You might also like