Professional Documents
Culture Documents
Issue: Revision A
SERVICE BULLETIN
Subject
As part of the continuous product improvement, a new fastener for the straw chopper (idler-shaft-driven)
pulley has been released on combines manufactured from MY20. Refer to table below for the applicable
starting serial numbers:
Corrective Action
A larger diameter and thickness washer (P/N: D25400068) has been introduced to improve the fastening of
the pulley driven by the idler shaft.
AGCO Limited
Registered Office: Abbey Park Stoneleigh Kenilworth England CV8 2TQ
Telephone: 02476694400 Fax: 02447652495 Registered No. 509133 England
www.masseyferguson.com
MASSEY FERGUSON is a worldwide brand of AGCO
Page 2 / 2 COMB 01/20
It is possible to retrofit the new installation on combines of the previous model year.
GUID-1604CA62-4FB3-4826-9F03-2E6B18EDC01E-high.jpg [High]
Fig. 1
ADDITIONAL INFORMATION:
This bulletin is for technical information only and does not constitute authority for warranty.
Yours faithfully,