Professional Documents
Culture Documents
Guide For REPAIR Housing TRANDUSER KS-UT100
Guide For REPAIR Housing TRANDUSER KS-UT100
1. Open the Enclosure & Housing Transducer using a 10 key and a screwdriver +
This pcb
area does
not need to This pcb
be opened area does
not need to
be opened
3. Open the base PCB (the black one), to make it easier to open the lower transducer housing
(using a 2.5mm L key)
( pcb is not
necessary ! )
5. After everything has been opened, it is reassembled (before attaching the lower part of the
housing, give Permatex Silicone sealant in the housing hole & the transducer cable is also
given a sealant) so that it is waterproof