Professional Documents
Culture Documents
30 GB0
30 GB0
If the equipment cabinet is configured and assembled by the installation company, only the 11 FACP variants
according to the Construction Products Directive (CPD/BPR) are permitted - see documentation
798985.GB0, section 3!
After assembly, completion of this checklist is mandatory in order to allow affixing of the enclosed type plate
from the manufacturer.
The filled out checklist must be provided to the operator as a conformity declaration.
1.2 Installer
Name:
Street:
Postal code, city:
Telephone:
Email:
Responsible technician:
(acc. to DIN 14675)
1.3 Expert
Name:
Street:
Postal code, city:
Telephone:
Email:
Acceptance inspection on:
Stamp/signature:
GB Checklist
798985.30.GB0
11.2016 / AA
Novar GmbH a Honeywell Company
Dieselstraße 2
41469 Neuss, Germany
Telefon: +49 2131 40615-600
Telefax: +49 2131 40615-606
Internet: www.esser-systems.com Technical changes reserved!
E-Mail: info@esser-systems.com © 2016 Honeywell International Inc.
2.1 Designs of the equipment cabinet
1 2 3 4 5 6 7 8 9 10 11
Variant: For variants, see section 3
AB number:
Date of installation:
Remarks:
On which side were the support rails with terminal cards placed?
(Specification incl. type of terminal card)
Front:
Right:
Left:
Rear:
2 FB 798985.30.GB0 / 11.16
Was the display and operating unit (Part No. FX808324.19)
installed according to the documentation (Part No. 798985.GB0)? Yes No
Were the included cable guide plates installed according to the documentation
(Part No. 798985.GB0)? Yes No
Was the display and operating unit (Part No. FX808324.19) connected
according to the documentation (Part No. 798985.GB0)? Yes No
Remarks:
Was the energy supply connected according to the documentation (Part No.
798985.GB0)? Yes No
Remarks:
Was the hybrid cable (Part No. FX808455) connected in the variants 7…11
according to the documentation (Part No. 798985.GB0)? Yes No
If yes, was the return line implemented with the hybrid cable (Part No.
FX808455)?
(Closed loop of the PSM) Yes No
Was the electrical safety (protective conductor test) performed according to DIN
VDE 0113/EN 60204-1 and passed? Yes No
Remarks:
FB 798985.30.GB0 / 11.16 3
Special characteristics of the equipment cabinet (e.g. additional cooling, lighting, etc.):
Was equipment from other areas (VAS, EMT, DDC, PLC, etc.) integrated into the Yes No
equipment cabinet?
Devices external to the system may not be integrated into the equipment cabinet!
Das Bild k ann nicht angezeigt werden.
Was the supplied type plate affixed according to the documentation (Part No. 798985.GB0)? Yes No
Company stamp
Deviations / Remarks:
4 FB 798985.30.GB0 / 11.16
3. Variants of the FACP FlexES Control in the equipment cabinet
FB 798985.30.GB0 / 11.16 5
6 FB 798985.30.GB0 / 11.16