Professional Documents
Culture Documents
HOME interview Questions MCQs *LAB VIVA CLASS NOTES SEMINAR TOPICS
ONLINE TEST GATE IIT JEE CAT
Ads by Google
Thermal
Price of Steel
Analysis
Aluminium Casting
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 1/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
12. Under what condition the work done in reciprocating Like Page
compressor will be least ?
Be the first of your friends to like this
ratio ? Follow
493 followers
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 2/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
19. Which impurities form hard scale and which impurities soft
scale ?
20. What is the difference between hard water and soft water ?
Ans: Water tube boilers raise steam fast because of large heat
transfer area and positive water circulation. Thus they respond
faster to fluctuations in demand. Further single tube failure
does not lead to catastrophy.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 3/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
insert and take out the cover plate from elliptical opening.
Axis. A volatile liquid will boil under the proper conditions and
in so doing will absorb heat from surrounding objects.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 4/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Ans: Glycerine has boiling point of 90°C which increases its heat
carrying capacity. Thus weight of coolant gets reduced and
smaller riadiator can be used.
Ans: In twostroke engine lub oil is mixed with petrol and thus
some lub oil is blown out through the exhaust valves by
scavenging and charging air. There is no such wastage in four
stroke petrol engine.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 5/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Ans: Boiler tubes, usually are made from carbon steel and are
subject to (a) high rates of heat transfer,( b ). bending stresses
due to uneven heating, especially at expanded or welded joints
into headers or drums, © external erosion from burners and
flue gas, (d) possible corrosion on the boiler side, and (e)
occasional manufacturing defects.
(a) High thermal ratings may lead to rapid failure if the internal
fluid flow is reduced for any reason. The resultant overheating
leads to a failure by creep, characterised by the bulging of the
tube with the eventual development of a longitudinal split.
47. Which furnace burns lowash fusion coal and retains most of
the coal ash in the slag?
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 8/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
52. Why axial flow compressor is preferred for gas turbines for
aeroplanes ?
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 9/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
56. Which are the reference fuels for knock rating of S.I. engines
?
59. The amount of radiation emitted per scm per sec is called ….
?
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 10/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
69. What for Schmidt plot for is used in heat transfer problems ?
70. In which reactor the coolant and moderator are the same ?
Ans: It has rapid self breeding of fissile fuel during the operation
of the reactor, and thus, it offers about sixty times the output
with same natural uranium resources through ordinary non
breeder nuclear reactor.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 13/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Ans: Hydrogen.
Ans: Fuel ratio is the ratio of its % age of fixed carbon to volatile
matter.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 14/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Ans: The materials which can give nuclear fission e.g. U 35, Pu
39, U 33 are fissile materi¬als. Fertile material itself is not
fissionable, but it can be converted to a fissionable material by
irradiation of neutrons in a nuclear reactor.
85. What is heavy water and what is its use in nuclear plants ?
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 15/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 16/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Ans: CANDU.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 17/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Ans: Enthalpy.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 18/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
(i) rigidity
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 19/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Ans: 2.5%.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 20/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Ans: Chromium.
Ans: yes.
Ans: Rubber.
15. Why is it that the maximum value which the residual stress
can reach is the elastic limit of the material ?
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 21/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
19. List at least two factors that promote transition from ductile
to brittle fracture.
20. Which theories of failure are used for (a) ductile materials,
and (B) brittle materials ?
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 22/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Ans: (i) Area of the section of the heat flow path, perpendicular
to the direction of heat flow.
Ans: Copper.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 23/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
31. For which parts the Wahl factor and Lewis form factor used
?
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 24/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
35. What is the difference between alpha iron, delta iron and
gamma iron ?
Ans: The bcc form of iron exists between room temperature and
910°C, and between 1400°C and the melting point at 1539°C.
The lower temperature form is known as “alpha”iron and the
higher temperature form as “delta”iron. The facecentered
cubic form existing between 910°C and 1400°C is referred to as
“gammairon”.
Eutectoid. Eutectoid alloys are the alloys for which two solid
phases which are completely soluble become completely
insoluble on cooling before a certain temperature called
eutectoid tem¬perature.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 27/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Ans: 4%.
49. What are killed steels and what for these are used ?
Ans: Killed steels are deoxidised in the ladle with silicon and
aluminium. On solidification no gas evolution occurs in these
steels because they are free from oxygen.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 28/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
(3) To modify the type of oxide film formed on the surface of the
steel and thereby affect its corrosion resistance.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 30/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 31/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 32/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
68. What is the difference between basic hole and basic shaft ?
72. Explain the difference between grey iron and white iron.
What is mottled iron ?
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 33/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
73. The graphite in grey irons exists in the form of flakes which
act as stressraisers under tensile loading and consequently grey
irons have relatively low tensile strength and ductility. Still grey
iron is extensively used in engineering. Why ?
(a) Cheapness.
(B) Low melting point and high fluidity making it suitable for
castings of intricate shape.
75. What is endurance limit and what is its value for steel ?
76. How the net work to drive a compressor and its volumetric
efficiency behave with increase in clearance volume ?
Ans: Admirality brass with 29% zinc and 1% tin has good
corrosion resistance and is used for condenser and feed heater
tubes. Aluminium is also added to brass to improve corrosion
resistance.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 35/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
84. What is the name given to ratio of actual cycle efficiency and
ideal cycle efficiency.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 36/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Ans: Whiskers are very small crystals which are virtually free
from imperfections and dislocations.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 37/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
94. Define the terms free energy and free enthalpy. What is their
significance and importance ?
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 38/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Ans: Volume.
Ans: Yes.
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 39/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Download
Free Download Go to unzipper.com
nikesh pandey
FEBRUARY 14, 2017 AT 2:48 PM
REPLY
Ritesh
JANUARY 28, 2017 AT 3:32 PM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 40/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
Vikas
JANUARY 16, 2017 AT 4:01 PM
REPLY
REPLY
Emy
JANUARY 6, 2017 AT 10:15 PM
Hello
emtal21@gmail.com
REPLY
pramod
JANUARY 2, 2017 AT 5:39 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 41/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
part also….
Old..sir it’s a kind request.
REPLY
R.Sanjeevi
DECEMBER 26, 2016 AT 12:01 PM
REPLY
harsh gadhavi
DECEMBER 17, 2016 AT 10:51 AM
sharsh2405@gmail.com
REPLY
arul
DECEMBER 14, 2016 AT 2:07 PM
REPLY
Jaru Dipak
DECEMBER 10, 2016 AT 6:43 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 42/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Respected Sir,
Please send to me all the questions and their
answer in my mail address…
REPLY
Thambidurai
DECEMBER 6, 2016 AT 4:44 PM
REPLY
Jagannath
DECEMBER 5, 2016 AT 4:55 PM
REPLY
my email adress
nktandee@gmail.com
REPLY
hello sir,
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 43/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
T. Geeta
NOVEMBER 9, 2016 AT 12:12 PM
REPLY
manikanta
NOVEMBER 5, 2016 AT 4:00 PM
REPLY
nandeesh
NOVEMBER 2, 2016 AT 5:06 PM
REPLY
Frank ovie
NOVEMBER 2, 2016 AT 9:23 AM
REPLY
chaitu
OCTOBER 20, 2016 AT 4:21 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 44/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
bharath
OCTOBER 19, 2016 AT 10:29 AM
REPLY
akshay
OCTOBER 16, 2016 AT 2:53 PM
REPLY
REPLY
ROHIT
OCTOBER 12, 2016 AT 9:50 AM
REPLY
shahzad ali
OCTOBER 6, 2016 AT 11:08 AM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 45/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
SURESH
SEPTEMBER 28, 2016 AT 4:33 PM
REPLY
prashant naik
SEPTEMBER 28, 2016 AT 9:08 AM
REPLY
Abrar
SEPTEMBER 27, 2016 AT 10:01 AM
REPLY
raj gaurav
SEPTEMBER 23, 2016 AT 5:17 PM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 46/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
sharanu
SEPTEMBER 21, 2016 AT 6:12 PM
REPLY
sharanu
SEPTEMBER 21, 2016 AT 6:11 PM
REPLY
Gobind Singh
SEPTEMBER 18, 2016 AT 7:31 PM
Dear Sir,
My mail id – gbrajput98@gmail.com
REPLY
Rajas
SEPTEMBER 16, 2016 AT 4:10 PM
plz sir i want all this que and ans plz send me to my
email id
my email id is rautrajas2013@gmail.com
REPLY
Naseem Khan
SEPTEMBER 16, 2016 AT 1:10 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 47/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
S.SARAVANAN
SEPTEMBER 16, 2016 AT 4:23 AM
REPLY
surya Kumar
SEPTEMBER 15, 2016 AT 10:48 AM
REPLY
REPLY
akshay mashere
SEPTEMBER 7, 2016 AT 8:17 AM
sir,
plz send me all types of mechanical engineering
interview questions
{for ex.Technical,Nontechnical,and HR interview
question}
akshaymashere707@gmail.com
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 48/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
mrinmoy banerjee
SEPTEMBER 6, 2016 AT 2:44 AM
REPLY
Wilbert
SEPTEMBER 4, 2016 AT 12:02 AM
Dear Sir:
REPLY
V.NAVEEN
SEPTEMBER 3, 2016 AT 7:15 PM
REPLY
jibanjyoti das
SEPTEMBER 3, 2016 AT 12:14 PM
REPLY
Ethiraj
SEPTEMBER 2, 2016 AT 2:02 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 49/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
sheick
SEPTEMBER 1, 2016 AT 10:06 AM
REPLY
kuldeep kumar
AUGUST 31, 2016 AT 9:10 PM
REPLY
Razu Ahmmed
AUGUST 29, 2016 AT 10:47 AM
Dear Sir,
I want this 200 Mechanical Engineer Question and
ans please send me please my Email Add is …..
REPLY
rajesh
AUGUST 27, 2016 AT 1:28 PM
Please pdf
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 50/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Nitish roy
AUGUST 27, 2016 AT 8:42 AM
REPLY
gopi
AUGUST 26, 2016 AT 10:51 AM
mail id:gopinathkesavan21@gmail.com
REPLY
anmoldeep
AUGUST 25, 2016 AT 10:25 AM
REPLY
sheick
AUGUST 24, 2016 AT 5:09 PM
REPLY
Zeeshan
AUGUST 24, 2016 AT 2:16 AM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 51/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Kunti kumari
AUGUST 22, 2016 AT 5:33 PM
REPLY
Abhishek
AUGUST 21, 2016 AT 11:18 AM
REPLY
ARUN
AUGUST 18, 2016 AT 4:36 PM
REPLY
Thandavamoorthy
AUGUST 18, 2016 AT 7:58 AM
REPLY
SUJITH S
AUGUST 17, 2016 AT 10:47 AM
REPLY
Purav rana
AUGUST 16, 2016 AT 7:42 AM
Hello..sir
I want this que. &ans for my interview preparation.
Plz send to my mail.
REPLY
Rakesh
AUGUST 15, 2016 AT 9:13 PM
Respected sir
i want question ans. automobile industry in pdf file
so plz send on my email id
rchauhan5414@gmail.com
Thanks &Regards
Rakesh kumar
REPLY
sandeepkumar dass
AUGUST 15, 2016 AT 1:47 AM
REPLY
Abubakar
AUGUST 14, 2016 AT 8:47 AM
Dear Sir !
I want to get these question answer in pdf format ?
will u send it to me please?
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 53/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
asif sayed
AUGUST 14, 2016 AT 6:15 AM
REPLY
kauser
AUGUST 11, 2016 AT 7:07 PM
REPLY
jaya Murugan
AUGUST 11, 2016 AT 4:04 PM
REPLY
md ashafque ali
AUGUST 11, 2016 AT 12:58 AM
REPLY
sunny kumar
AUGUST 10, 2016 AT 6:42 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 54/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
emily n
AUGUST 10, 2016 AT 6:29 AM
REPLY
rakesh
AUGUST 8, 2016 AT 8:17 AM
REPLY
Bikramjit Paul
AUGUST 7, 2016 AT 3:34 PM
REPLY
Danish
AUGUST 4, 2016 AT 8:00 AM
REPLY
PATIL RAJESH
AUGUST 4, 2016 AT 6:47 AM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 55/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
chandan Gupta
AUGUST 2, 2016 AT 4:27 AM
sir
I want thermal engineering viva question & answer
in pdf file.
plg send on my email
REPLY
Mohammed
AUGUST 10, 2016 AT 7:03 PM
REPLY
Rahul K R
AUGUST 1, 2016 AT 4:26 PM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 56/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
prashant langute
AUGUST 1, 2016 AT 9:44 AM
REPLY
amar
JULY 30, 2016 AT 3:12 PM
REPLY
sarver khan
JULY 30, 2016 AT 1:31 PM
REPLY
anoop
JULY 30, 2016 AT 7:55 AM
REPLY
rahul
JULY 30, 2016 AT 6:09 AM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 57/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
tarun mishra
JULY 30, 2016 AT 4:17 AM
REPLY
sandeep
JULY 29, 2016 AT 5:17 AM
REPLY
Laljith K S
JULY 28, 2016 AT 4:25 PM
Sir,
I want these questions and answers.
Can u mail it??
(machanical engineering)
REPLY
Laljith K S
JULY 28, 2016 AT 4:23 PM
Sir,
I want these questions and answers.
Can u mail it??
REPLY
saravanan
JULY 24, 2016 AT 10:55 AM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 58/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
Krunal
JULY 22, 2016 AT 1:29 PM
theking6595@gmail.com
please mail me all que. ans sir. i am thankful to you
REPLY
Krunal
JULY 22, 2016 AT 1:28 PM
REPLY
Raj Patel
JULY 22, 2016 AT 1:26 PM
REPLY
Mandeep
JULY 22, 2016 AT 1:53 AM
Hello Sir,
I want all of these Questions & Answer .
So, please send on my mail as PDF document.
I hope you send me.
Thank You.
REPLY
krishna shukla
JULY 20, 2016 AT 10:19 AM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 59/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
hello sir
please send it to me in my email so i can improve
more my knowledge.
REPLY
Dev
JULY 20, 2016 AT 7:56 AM
REPLY
Hello sir…..
I want all que. And ans so please sir send me on my
mail as pdf doc. Please sir…..
REPLY
Amol Gaikwad
JULY 19, 2016 AT 3:37 PM
Hello sir,
please send me listing questions and answers
above.
.
REPLY
Amol Gaikwad
JULY 19, 2016 AT 3:34 PM
hello sir,
please send me this pdf listing questions an answer
above. …
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 60/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
shahjeb khan
JULY 19, 2016 AT 1:56 PM
REPLY
Muzammil
JULY 19, 2016 AT 1:23 PM
REPLY
Rahul
JULY 17, 2016 AT 6:50 PM
REPLY
vasanth
JULY 17, 2016 AT 5:31 PM
REPLY
Rai govind
JULY 16, 2016 AT 5:05 PM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 61/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
BINEET PRAJAPATI
JULY 15, 2016 AT 1:11 PM
REPLY
Pratap Sing
JULY 15, 2016 AT 10:49 AM
excellent !!
sir plz send me these quetions in pdf format on my
mail IDpratapsingjarwal20@gmail.com
REPLY
vivek kumar
JULY 14, 2016 AT 11:05 AM
hello sir
thanku so much sir for all informations
plz can you send me mechanical engg questions
answers on my email ….
REPLY
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 62/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
anil
JULY 21, 2016 AT 5:43 AM
REPLY
satish
JULY 12, 2016 AT 7:59 PM
REPLY
yousef alhabsh
JULY 12, 2016 AT 9:06 AM
REPLY
Shiva Rao
JULY 9, 2016 AT 12:19 PM
REPLY
Sakure Pradip
JULY 8, 2016 AT 6:54 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 63/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
very nice,
sir/mam
please send me this que/ans on my email
sakurepradip137@gmail.com
REPLY
Suneeldath
JULY 7, 2016 AT 6:23 PM
REPLY
biranu kumsa
JULY 7, 2016 AT 2:59 PM
REPLY
Ajay
JULY 6, 2016 AT 12:08 PM
sir
plz send all these mechanical question and answer
to my mail…….
and also another questions n there answers which
you have
REPLY
Anand
JULY 6, 2016 AT 3:54 AM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 64/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
fatehjit singh
JULY 5, 2016 AT 9:12 AM
REPLY
Dharmendra kumar
JULY 3, 2016 AT 6:23 AM
REPLY
Dharmendra kumar
JULY 3, 2016 AT 6:21 AM
Thanks regard
REPLY
vishal
JULY 1, 2016 AT 6:21 AM
REPLY
sunny
JUNE 30, 2016 AT 1:11 PM
Hii…sir
Very nice
Please send me PDF to
penakasammaiah@gmail.com
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 65/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
amol
JUNE 30, 2016 AT 7:50 AM
REPLY
kiran sr
JUNE 30, 2016 AT 6:16 AM
REPLY
Essa ali
JUNE 28, 2016 AT 5:21 PM
REPLY
Mayur patil
JUNE 28, 2016 AT 12:10 PM
REPLY
arun choudhary
JUNE 28, 2016 AT 6:22 AM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 66/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
Vinod
JUNE 27, 2016 AT 1:46 AM
REPLY
pravinbhai
JUNE 26, 2016 AT 3:51 PM
REPLY
pravinbhai
JUNE 26, 2016 AT 3:36 PM
REPLY
sandeep
JUNE 26, 2016 AT 7:00 AM
REPLY
Rahul yadav
JUNE 26, 2016 AT 4:22 AM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 67/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
Salman
JUNE 24, 2016 AT 11:34 AM
REPLY
hemant
JUNE 24, 2016 AT 7:12 AM
REPLY
Raval bhumi
JUNE 24, 2016 AT 6:52 AM
REPLY
Upender Singh
JUNE 23, 2016 AT 9:00 AM
REPLY
prasad
JUNE 23, 2016 AT 7:29 AM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 68/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
mohana c
JUNE 23, 2016 AT 2:00 PM
REPLY
ARUMUGAM S
JUNE 21, 2016 AT 8:13 AM
REPLY
Md Hannad Anwar
JUNE 20, 2016 AT 8:16 AM
REPLY
Md Hannad Anwar
JUNE 20, 2016 AT 8:15 AM
Thank you
REPLY
Dev
JUNE 19, 2016 AT 12:17 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 69/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
bhavesh
JUNE 19, 2016 AT 12:16 PM
Hello Sir,
REPLY
bhavesh
JUNE 19, 2016 AT 12:15 PM
Hello Sir,
REPLY
P.Subramanyam
JUNE 18, 2016 AT 3:47 PM
REPLY
gaurav
JUNE 15, 2016 AT 2:42 PM
Hello Sir,
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 70/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
akshay divekar
JUNE 12, 2016 AT 8:53 AM
REPLY
akshay divekar
JUNE 12, 2016 AT 8:52 AM
REPLY
akshay divekar
JUNE 12, 2016 AT 8:51 AM
REPLY
sandeep saini
JUNE 11, 2016 AT 3:50 AM
REPLY
Sanket
JUNE 10, 2016 AT 5:50 PM
REPLY
jagadesh
JUNE 10, 2016 AT 12:23 PM
REPLY
Rakesh Yadav
JUNE 6, 2016 AT 3:06 PM
REPLY
murugan
JUNE 6, 2016 AT 2:40 PM
REPLY
Sarvnam
JUNE 6, 2016 AT 7:04 AM
REPLY
Sarvnam
JUNE 6, 2016 AT 6:56 AM
Sarvnampandey@gmail.com
REPLY
Thirumalaivasan
JUNE 6, 2016 AT 6:10 AM
REPLY
Nahid EQBAL
JUNE 3, 2016 AT 6:40 PM
REPLY
PHANI KUMAR
JUNE 3, 2016 AT 9:38 AM
REPLY
Anant Sonwane
JUNE 3, 2016 AT 6:51 AM
REPLY
Anant Sonwane
JUNE 3, 2016 AT 6:49 AM
point of view.
sir i request you please send me pdf of these Q.
REPLY
Harshad Jadhav
JUNE 2, 2016 AT 5:04 PM
REPLY
Harshad Jadhav
JUNE 2, 2016 AT 5:01 PM
REPLY
REPLY
Sumit Kumar
JUNE 1, 2016 AT 5:27 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 74/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
ID sk876519@gmail.com
REPLY
sarwar
JUNE 1, 2016 AT 9:09 AM
REPLY
Rahul v hotti
JUNE 1, 2016 AT 7:45 AM
REPLY
bikramaditya barik
MAY 31, 2016 AT 1:46 PM
REPLY
vipul
MAY 31, 2016 AT 3:25 AM
Plzz send me it
REPLY
shiva
MAY 30, 2016 AT 2:08 AM
REPLY
Diya saini
MAY 28, 2016 AT 1:06 PM
REPLY
vishal
MAY 28, 2016 AT 8:15 AM
REPLY
Sameer Nakhate
MAY 26, 2016 AT 6:53 PM
REPLY
Hridesh Varshney
MAY 26, 2016 AT 1:19 PM
REPLY
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 76/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
raju
MAY 25, 2016 AT 7:19 AM
REPLY
REPLY
jrsfer
MAY 18, 2016 AT 8:53 AM
REPLY
Gagan
MAY 17, 2016 AT 7:57 AM
REPLY
Siddalingesh V Karanelli
MAY 14, 2016 AT 12:20 PM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 77/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Siddalingesh V Karanelli
MAY 14, 2016 AT 12:12 PM
REPLY
vishal
MAY 12, 2016 AT 6:06 PM
It’s good
Patilvishal81.23@gmail.com
REPLY
Satish nayak
MAY 11, 2016 AT 4:47 PM
Hello Sir,
REPLY
Karthik E
MAY 11, 2016 AT 5:16 AM
REPLY
Karthik E
MAY 11, 2016 AT 5:12 AM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 78/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
Vishal sharma
MAY 9, 2016 AT 7:05 PM
REPLY
Asif iqbak
MAY 9, 2016 AT 12:12 PM
REPLY
Sunil Mewada
MAY 9, 2016 AT 11:08 AM
REPLY
Dhilipan.n
MAY 6, 2016 AT 9:05 AM
REPLY
Omkar patil
MAY 5, 2016 AT 5:32 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 79/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
seyfu tiruneh
MAY 2, 2016 AT 9:01 AM
engir
REPLY
seyfu tiruneh
MAY 2, 2016 AT 9:01 AM
REPLY
seyfu tiruneh
MAY 2, 2016 AT 8:59 AM
REPLY
karthik
APRIL 29, 2016 AT 11:36 AM
REPLY
Harinath shukla
APRIL 27, 2016 AT 5:12 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 80/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
Manjunath
APRIL 22, 2016 AT 2:12 PM
REPLY
Jeet
APRIL 22, 2016 AT 10:26 AM
REPLY
vikas
APRIL 21, 2016 AT 4:06 AM
Respected Sir,
Thank you for the all the great work you have done.
kindly do send me the pdf Mechanical questions to
mail vikassugurc97@gmail.com
REPLY
Rahul Ranjan
APRIL 20, 2016 AT 7:01 PM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 81/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
gautam kolgaonkar
APRIL 20, 2016 AT 2:20 PM
REPLY
sachin pomane
APRIL 20, 2016 AT 7:59 AM
REPLY
santosh kumar
APRIL 20, 2016 AT 4:57 AM
REPLY
Deepak chaudhary
APRIL 19, 2016 AT 1:49 AM
REPLY
Deepak chaudhary
APRIL 19, 2016 AT 1:43 AM
REPLY
ARSLAN
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 82/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
PAVAN KUMAR
APRIL 17, 2016 AT 11:21 AM
REPLY
PAVAN KUMAR
APRIL 17, 2016 AT 11:17 AM
REPLY
k.shafi
APRIL 15, 2016 AT 5:55 PM
REPLY
salman Khan
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 83/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
Raju kumar
APRIL 14, 2016 AT 4:33 PM
REPLY
arun kumar
APRIL 14, 2016 AT 12:23 PM
REPLY
Niranjan
APRIL 13, 2016 AT 5:12 PM
REPLY
jay
APRIL 13, 2016 AT 7:38 AM
REPLY
sai vishnu
APRIL 11, 2016 AT 11:49 AM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 84/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
jay
APRIL 11, 2016 AT 6:24 AM
REPLY
Shriram Verma
APRIL 11, 2016 AT 12:54 AM
Sir
in Isentropic process heat transfer takes place?????
Plz go through 100 no. question (difference
between isentropic & throttling)
REPLY
AJAY
APRIL 9, 2016 AT 4:24 PM
sir
can you please send me the the interview question
answers …its very much helpful
REPLY
sudhanshu shekhar
APRIL 9, 2016 AT 2:20 AM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 85/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Vishal jogani
APRIL 8, 2016 AT 7:21 AM
REPLY
REPLY
Dear, sir plz send the all question with ans in pdf
for me
REPLY
Aceinmech
APRIL 4, 2016 AT 2:20 PM
REPLY
Chandan
APRIL 4, 2016 AT 9:29 AM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 86/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Amit kumar
APRIL 1, 2016 AT 2:45 PM
REPLY
JOy
APRIL 1, 2016 AT 11:29 AM
REPLY
Ombir phalswal
MARCH 31, 2016 AT 4:07 AM
Sir
I want this question in pdf .
Will u send them on my mail .
REPLY
rahul saini
MARCH 29, 2016 AT 10:46 AM
REPLY
E.Haridas
MARCH 27, 2016 AT 7:44 AM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 87/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
jaysukhbhai
MARCH 26, 2016 AT 11:41 AM
REPLY
balwant lokhande
MARCH 26, 2016 AT 11:36 AM
REPLY
Dilip maiti
MARCH 20, 2016 AT 2:31 PM
REPLY
engineer
MARCH 22, 2016 AT 10:28 AM
REPLY
akshay
OCTOBER 16, 2016 AT 2:57 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 88/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
akshay
OCTOBER 16, 2016 AT 2:57 PM
REPLY
ganesh chand
MARCH 20, 2016 AT 9:34 AM
REPLY
nick
MARCH 18, 2016 AT 9:11 AM
REPLY
nick
MARCH 18, 2016 AT 9:09 AM
REPLY
Ashutosh Raj
MARCH 18, 2016 AT 6:57 AM
REPLY
Ashutosh Raj
MARCH 18, 2016 AT 6:56 AM
REPLY
BARATH KUMAR
MARCH 17, 2016 AT 10:42 AM
REPLY
David Obada
MARCH 15, 2016 AT 10:15 PM
REPLY
David Obada
MARCH 15, 2016 AT 10:14 PM
REPLY
ankit sharma
MARCH 12, 2016 AT 7:01 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 90/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
sharad
MARCH 10, 2016 AT 4:58 AM
REPLY
suraj
MARCH 7, 2016 AT 4:49 AM
REPLY
A, Prasad
MARCH 6, 2016 AT 8:53 AM
REPLY
engineer
MARCH 6, 2016 AT 6:10 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 91/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
prasad
MARCH 6, 2016 AT 8:48 AM
Sir…
These are very useful for all…
Sir can you please send me these to my mail…
.
prasadmechanical0303@gmail.com
Please send me
REPLY
engineer
MARCH 6, 2016 AT 5:42 PM
REPLY
Shiva prasad
MARCH 6, 2016 AT 6:40 AM
REPLY
engineer
MARCH 6, 2016 AT 5:41 PM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 92/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
engineer
MARCH 6, 2016 AT 5:39 PM
REPLY
Deepak
MARCH 4, 2016 AT 2:55 AM
REPLY
engineer
MARCH 4, 2016 AT 4:32 PM
REPLY
Nilesh Gupta
MARCH 3, 2016 AT 5:25 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 93/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
engineer
MARCH 4, 2016 AT 4:28 PM
REPLY
narayanan
MARCH 3, 2016 AT 11:15 AM
REPLY
engineer
MARCH 3, 2016 AT 4:34 PM
REPLY
mayur ingale
MARCH 3, 2016 AT 6:26 AM
REPLY
engineer
MARCH 3, 2016 AT 4:32 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 94/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
KTS
MARCH 2, 2016 AT 5:34 AM
REPLY
engineer
MARCH 2, 2016 AT 11:30 AM
REPLY
snehal
FEBRUARY 29, 2016 AT 7:09 PM
REPLY
engineer
MARCH 1, 2016 AT 3:44 AM
REPLY
Ajinkya
FEBRUARY 28, 2016 AT 4:48 PM
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 95/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
REPLY
engineer
FEBRUARY 28, 2016 AT 5:38 PM
REPLY
Ganesh
FEBRUARY 28, 2016 AT 11:28 AM
REPLY
engineer
FEBRUARY 28, 2016 AT 2:01 PM
REPLY
ishwar
DECEMBER 27, 2016 AT 1:24 PM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 96/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
GANESH
FEBRUARY 28, 2016 AT 11:01 AM
Hello Sir,
REPLY
engineer
FEBRUARY 28, 2016 AT 2:01 PM
REPLY
Salman
JUNE 24, 2016 AT 1:21 PM
REPLY
deepak kumar
JANUARY 1, 2017 AT 2:37 PM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 97/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
ajay kumar
FEBRUARY 27, 2016 AT 12:14 PM
REPLY
engineer
FEBRUARY 27, 2016 AT 12:15 PM
REPLY
SUDHARSAN M R
FEBRUARY 25, 2016 AT 7:35 AM
REPLY
engineer
FEBRUARY 25, 2016 AT 8:51 AM
REPLY
Piyush
FEBRUARY 23, 2016 AT 1:57 PM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 98/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
engineer
FEBRUARY 25, 2016 AT 8:46 AM
REPLY
Zelalem Desta
NOVEMBER 22, 2016 AT 6:24 PM
REPLY
manisha jagtap
FEBRUARY 22, 2016 AT 5:13 AM
REPLY
engineer
FEBRUARY 25, 2016 AT 8:42 AM
REPLY
ANKIT CHAUDHARY
FEBRUARY 21, 2016 AT 8:48 PM
REPLY
engineer
FEBRUARY 25, 2016 AT 8:41 AM
REPLY
Sarver khan
FEBRUARY 21, 2016 AT 12:35 PM
REPLY
engineer
FEBRUARY 25, 2016 AT 8:40 AM
REPLY
Rachti Raval
FEBRUARY 20, 2016 AT 9:38 AM
REPLY
engineer
FEBRUARY 25, 2016 AT 8:38 AM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 100/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
DHINESH A S
FEBRUARY 17, 2016 AT 2:55 PM
REPLY
engineer
FEBRUARY 17, 2016 AT 4:33 PM
REPLY
suraj
MARCH 7, 2016 AT 4:52 AM
REPLY
sir
I want thermal engineering viva question & answer
in pdf file.
plg send on my email
REPLY
engineer
FEBRUARY 13, 2016 AT 8:03 AM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 101/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
sheick
SEPTEMBER 1, 2016 AT 10:08 AM
REPLY
kalish
FEBRUARY 7, 2016 AT 4:28 PM
REPLY
engineer
FEBRUARY 7, 2016 AT 4:47 PM
REPLY
BALARAMAN
FEBRUARY 7, 2016 AT 6:22 AM
REPLY
engineer
FEBRUARY 7, 2016 AT 1:34 PM
REPLY
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 102/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
v.shashank
FEBRUARY 6, 2016 AT 8:35 PM
Tq
REPLY
engineer
FEBRUARY 7, 2016 AT 1:33 PM
REPLY
Kunti kumari
AUGUST 22, 2016 AT 5:38 PM
REPLY
Ethiraj
SEPTEMBER 2, 2016 AT 2:03 PM
REPLY
LEAVE A REPLY
Your email address will not be published. Required fields are marked *
Comment
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 103/104
2/28/2017 200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions
Name *
Email *
Website
Post Comment
http://engineeringinterviewquestions.com/mechanicalengineeringinterviewquestionsandanswers/ 104/104