Professional Documents
Culture Documents
Telephone : 215-366-7860
Mixtures
EC 1272/2008
Chemical Name Index No CAS No EC No REACH Regulation Conc. Classification
Number (%w/w)
Octamethylcyclotextrasiloxane 014-018-00-1 556-67-2 209-136-7 0-0.5% Repr. 2: H361f;
Aquatic Chronic 4:
H413
_____________________________________________________________________________________________
SECTION 4: First aid measures
____________________________________________________________________________________________
Extinguishing media
1
Suitable extinguishing media : Not combustible. If there is a fire close by, use suitable extinguishing
agents. Carbon dioxide(CO2), powder, alcohol-resistant foam, water
fog.
Unsuitable extinguishing media : None known.
Control parameters
Exposure controls
Appropriate engineering controls : Avoid splashing. Avoid creating mist or spray. Either local exhaust or
general room ventilation is usually required.
Hand protection : It is a good industrial hygiene practice to minimize skin contact. In
case of repeated or prolonged contact wear waterproof gloves.
Eye protection : Safety glasses. Use splash goggles when eye contact due to splashing
is possible.
Skin and body protection : Wear suitable protective clothing.
Respiratory protection : May be irritating to the respiratory system. In case of inadequate
ventilation wear respiratory protection.
_____________________________________________________________________________________________
SECTION 9: Physical and chemical properties
Other information
No additional information available
_____________________________________________________________________________________
SECTION 10: Stability and reactivity
Reactivity
Normally stable, even under fire exposure conditions, and not reactive with water.
Chemical stability
Stable under normal conditions
Possibility of hazardous reactions
Hazardous polymerization will not occur.
Conditions to avoid
Avoid contact with incompatible materials, excessive heat or cold
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Silicone dioxide. Carbon oxides and traces of incompletely burned carbon compounds, Formaldehyde.
Nitrogen oxides.
_____________________________________________________________________________________________
SECTION 11: Toxicological information
Acute toxicity : Not classified. (Based on available data, the classification criteria are not met)
Dimethyl, methyl aminoethylaminoisobutyl siloxane, methoxy & hydroxy terminated. 831241-93-1
LD50 oral rat None established
LD50 dermal rat None established
Skin corrosion/irritation : Not classified. (Based on available data, the classification criteria are
not met)
Serious eye damage/irritation : Not classified. (Based on available data, the classification criteria are
not met)
Respiratory or skin sensitization : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified. (Based on available data, the classification criteria are
not met)
Carcinogenicity : Not classified. (Based on available data, the classification criteria are
not met)
Reproductive toxicity : Not classified. (Based on available data, the classification criteria are
not met)
Specific target organ toxicity (single exposure) : Not classified. (Based on available data, the classification
criteria are not met)
4
Specific target organ toxicity (repeated exposure): Not classified. (Based on available data, the
classification criteria are not met)
Toxicity
Dimethyl, methyl aminoethylaminoisobutyl siloxane, methoxy & hydroxy terminated. 831241-93-1
LC50 fish 1 Under Review
Persistence and degradability
Dimethyl, methyl aminoethylaminoisobutyl siloxane, methoxy & hydroxy terminated. 831241-93-1
Persistence and degradability In soil, Readily biodegradable
Bioaccumulative potential
Dimethyl, methyl aminoethylaminoisobutyl siloxane, methoxy & hydroxy terminated. 831241-93-1
Log Kow Not applicable
Bioaccumulative potential Not established
Mobility in soil
No additional information available
5
US Federal regulations
Dimethyl, methyl aminoethylaminoisobutyl siloxane, methoxy & hydroxy terminated. 831241-93-1
Listed on the United States TSCA (Toxic Substances Control Act) inventory
EPA TSCA Regulatory Flag XU - XU - indicates a substance exempt from reporting under the Inventory Update
Reporting Rule, i.e., Partial Updating of the TSCA Inventory Data Base Production
and Site Reports (40 CFR 710(C)).
International regulations
CANADA
6156
WHMIS Classification This product has been classified in accordance with the hazard criteria of the CPR
and the MSDS contains all of the information required by the CPR
Class D Division 2 Subdivision B - Toxic material causing other toxic effects
EU-Regulations
Classification according to Regulation (EC) No. 1272/2008 (CLP)
Skin corrosion/irritation:
Category 2
Serious eye damage/eye irritation: Category 2
Full text of H-phrases: see section 16
National regulations
No additional information available
US State regulations
Not included in State Right-to-Know Hazardous Chemicals Lists
____________________________________________________________________________________________
SECTION 16: Other information
6
NFPA health hazard : 0- Exposure under fire conditions would offer no hazard beyond that
of ordinary combustible materials.
NFPA fire hazard : 0- Materials that will not burn.
NFPA reactivity : 0-Normally stable, even under fire exposure conditions, and are not
reactive with water.
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at
the date of its publication. The information is designed only as a guidance for safe handling, use, processing,
storage, transportation, disposal and release and shall not be considered a warranty or quality specification of any
type. The information provided relates only to the specific material identified at the top of this SDS and may not be
valid when the SDS material is used in combination with any other materials or in any process, unless specified in
the text. Material users should review the information and recommendations in the specific context of their intended
manner of handling, use, processing and storage, including an assessment of the appropriateness of the SDS material
in the user’s end product, if applicable.