Professional Documents
Culture Documents
Question 1
Question 2
Question 3
Question 4
Question 5
Question 6
Another name for a sector diagram is a:
Correct answer: Pie chart
Question 7
__________ is the scale that contains absolute or true zero, which implies the
absence of any trait.
Correct answer: Ratio
Question 8
Question 9
Question 10
In _________ scale, the variables are named or labelled in no specific order. This is
the measurement scale in which numbers are assigned to things, beings or events to
classify or identify or label them.
Correct answer: Nominal
Question 11
Question 12
___________ include scales wherein the researchers ask the respondents for their
relative preference between two or more objects.
Correct answer: Comparative scales
Question 13
_____________ are the commonly used graphical presentations for the set of
statistical distributions.
Correct answer: Frequency polygons
Question 14
Question 15
Question 16
Question 17
The sum of squares of deviations of different values from their arithmetic mean is
Correct answer: Minimum
Question 19
Question 20
Question 21
Question 22
Question 23
Which of the following is the value that most often occurs in a dataset?
Correct answer: Mode
Question 24
Which of the following is the mode (Z) when the following data is converted into an
ordinary frequency table?
2 students get less than 4 marks
5 students get less than 8 marks
13 students get less than 12 marks
16 students get less than 16 marks
20 students get less than 20 marks
Correct answer: Z = 10
Question 25
Question 26
Question 27
Question 28
Question 29
Question 30
Question 31
Question 32
Question 33
Question 34
Question 35
Question 36
The average of the squared differences from the Mean is called ____________.
Correct answer: Variance
Question 37
Q2 is ____________.
Correct answer: Median
Question 38
____________ represents the difference between the highest value and the lowest
value in a data series.
Correct answer: Range
Question 39
Which among the following comes under the relative measure of dispersion?
Correct answer: Co-efficient of Variation, Co-efficient of Range
Question 40
The ____________ is half of the distance between the third and the first quartile.
Correct answer: Quartile deviation
Question 41
Question 42
Question 43
Quartiles are the values that divide a list of numerical data into ____________
quarters.
Correct answer: Three
Question 44
An ____________ measures of dispersion contain the same unit as the original data
set.
Correct answer: Absolute
Question 45
The measures of dispersion can be used to study the dispersed values near
the____________value.
Correct answer: Mean
Question 46
Question 47
The probability of the intersection is called the_________probability.
Correct answer: Joint
Question 48
Question 49
Question 50
Question 51
Question 52
A _________ refers to a number that exhibits the chance or likelihood that a certain
event will happen.
Correct answer: Probability
Question 53
A_________for an event E is said to be the set of all outcomes which are not
included in a particular set of outcomes for event E.
Correct answer: Compliment
Question 54
Question 55
Question 56
Question 57
The specific multiplication rule is simple, but it is applicable only when two events
are _________.
Correct answer: Independent
Question 58
Question 59
Question 60
Question 61
_______ correlation refers to the correlation between two data series in which the
data is ranked.
Correct answer: Rank
Question 62
Question 63
Question 64
_______ is employed as a widely used and reliable method of analysing the linear
relation between variants.
Correct answer: Correlation
Question 65
Question 66
A _______ correlation infers that two or more variables have a strong relationship
with each other.
Correct answer: High
Question 67
_______ correlation is used to find the degree of the linear relationship between two
variables.
Correct answer: Simple
Question 68
Question 69
When there is the relation between the variables, it has been said that the variables
are _______ .
Correct answer: Correlated
Question 70
Question 71
When the change in one variable is in one direction but the change in another
variable is just opposite to it, it is called as _______ .
Correct answer: Negative correlation
Question 72
When the change in one variable results in the change in another variable in the
same direction is it said to have _______ .
Correct answer: Positive correlation
Question 73
Question 74
Hypothesis is formulated to solve the problem by testing it with the help of various
tests of ________ .
Correct answer: Significance
Question 75
Question 76
Question 77
Question 78
Question 79
Question 80
________ is used to compare the ratio of variances of two samples under study.
Correct answer: F-test
Question 81
Question 82
Question 83
Question 84
A researcher first forms a hypothesis about a problem and then tests it to check
its ________ by using statistical measures.
Correct answer: Validity
Question 85
Question 86
A hypothesis should be clear and specific to facilitate a deep and ________ study.
Correct answer: Comprehensive
Question 87
Question 88
Question 89
Question 90
Question 91
Question 93
Question 94
________ test is a part of directional hypothesis that talks not only about the
relationship between two variables but also the direction of relationship.
Correct answer: One-tailed
Question 95
Question 96
hypothesis is a very useful tool to solve various research ________ and issues.
Correct answer: Problems
Question 97
________ tests which make assumptions about the parameters of the population
from which a sample is derived.
Correct answer: Parametric
Question 98
In one-way ANOVA, if the value of F-ratio lies under the limits of acceptance region:
Correct answer: The null hypothesis is accepted and the alternate hypothesis is
rejected.
Question 99
Question 100
In chi-square test for _______ , two attributes are tested to find out whether they are
associated with each other.
Correct answer: Independence
Question 101
In a chi-square test, first the researcher finds out the expected frequency on the
basis of _______ .
Correct answer: Distribution
Question 102
Question 103
Chi-squared test is used for measuring how well the observed distribution of data
fits with the expected distribution of data in case of:
Correct answer: Independent variables
Question 104
Question 105
Question 106
Question 107
Question 108
Question 109
_______ is used when a researcher wants to test the differences between groups
that have been split on the basis of two attributes or independent variables or
factors.
Correct answer: Two-way ANOVA
Question 110
Question 111
_______ is used to study and explain the amount of variation in more than two
samples or data sets.
Correct answer: ANOVA
Question 112
The _______ is used to determine whether a substantial difference exists between
the expected frequencies and the observed frequencies in one or multiple
categories.
Correct answer: Chi-squared test
Question 113
Question 114
Question 115
Question 116
Question 117
Question 119
These variables have no physical existence in the problem and are only used for the
objective of finding the basic feasible solution so that the simplex method can be
applied. These are:
Correct answer: Artificial variables
Question 120
Question 121
Conditions that can limit the achievement of the objectives are called _______ .
Correct answer: Constraints
Question 122
The steps commonly used for defining a linear programming problem involve:
Correct answer: Identifying decision variables, Writing an objective function,
Mentioning constraints. All of these
Question 123
In a problem, if no solution exists which satisfies all the constraints, then this
situation is called _______ .
Correct answer: Infeasibility
Question 124
Question 125
Question 126
In the OR process, which of the following steps will logically follow after obtaining a
solution from the model?
Correct answer: Testing the model and solution
Question 127
In which step of the OR process, is the solution obtained from the OR study
translated into operating procedure?
Correct answer: Implementing the solution
Question 128
Question 130
Question 131
Question 132
_______ refers to the study and causes of the uncertainty in the output obtained of
a mathematical model or system that relies on inputs from different sources.
Correct answer: Sensitivity analysis
Question 133
Question 134
The _____________ refers to the transporting cost of one unit of the consignment
from an origin to a destination.
Correct answer: Unit transportation cost
Question 135
Question 136
Question 137
Question 138
Question 139
Question 140
Question 141
In which of the following methods, basic variables are chosen according to unit
cost?
Correct answer: Least cost method
Question 142
When the supplies and demands are both equal, then the problem is said to be
a _____________ transportation problem.
Correct answer: Balanced
Question 143
Question 144
Which of the following methods is most likely to provide the best starting solution?
Correct answer: Vogel’s approximation method
Question 146
Question 147
Question 148
When the total supply is equal to the total demand in a transportation problem, the
problem is said to be?
Correct answer: Balanced
Question 149
Question 150
The objective function of the transportation problem is to:
Correct answer: Minimise the total cost
Question 151
In the transportation problem cij is generally used as the variable for which of the
following?
Correct answer: Unit transportation cost from origin i to destination j
Question 152
For a transportation problem with 7 rows and 5 columns, what should be the number
of allotted cells for the solution to not be degenerate?
Correct answer: 11
Question 153
In the optimal solution, more than one empty cell has their opportunity cost as zero,
it indicates
Correct answer: The problem has alternate solution
Question 154
Question 155
Question 156
In a transportation problem, when the number of occupied routes is less than the
number of rows plus the number of columns -1, we say that the solution is:
Correct answer: Degenerate
Question 157
Question 158
Question 159
The northwest corner rule requires that we start allocating units to shipping routes in
the:
Correct answer: Upper left-hand corner of the table
Question 160
Question 162
Question 163
Which method usually gives a very good solution to the assignment problem?
Correct answer: Vogel’s approximation method
Question 164
Question 165
Question 166
The column, which is introduced in the matrix to balance the rim requirements, is
known as
Correct answer: Dummy column
Question 167
Question 168
Question 169
Question 170
Question 171
Which of the following is the first step in estimating the time of a project?
Correct answer: Understanding the requirement
Question 173
Question 174
Question 175
In which of the following types of constraints can the management anticipate some
amendments that may result in holding off a process?
Correct answer: Management constraints
Question 176
Question 177
What is the completion of a CPM network diagram activity commonly known as?
Correct answer: Connector, Event, Node, All of these
Question 178
Question 179
Question 180
Question 181
Question 182
Which of the following represents the time an activity takes to finish in adverse
conditions?
Correct answer: Pessimistic time
Question 183
Which of the following is concerned with making sure that the demand for resources
does not go beyond its availability?
Correct answer: Resource levelling
Question 184
Question 185
Question 186
Question 187
Activities P, Q, and R instantly follow activity M, and their current starting times are
12, 19, and 10. Hence, what is the latest finishing time for activity M?
Correct answer: 11
Question 188
Activities A, B, and C are the immediate predecessors for Y activity. If the earliest
finishing time for the three activities are 12, 15, and 10, then what will be the earliest
starting time for Y?
Correct answer: 15
Question 189
Question 190
Question 191
Question 192
Question 193
Question 194
Question 196
Question 197
Question 198
ASCII and EBCDIC are the popular character coding systems. What does EBCDIC
stand for?
Correct answer: Extended Binary Coded Decimal Interchange Code
Question 199
Question 200
UNIVAC is:
Correct answer: Universal Automatic Computer
Question 201
Question 202
A hybrid computer
Correct answer: Resembles both a digital and analogue computer
Question 203
A storage area used to store data to a compensate for the difference in speed at
which the different units can handle data is
Correct answer: Buffer
Question 204
Question 205
CD-ROM is a
Correct answer: A CD-ROM (Compact Disc Read-Only Memory) is a type of
compact disc that can only be read, not written to
Question 207
Question 208
To produce high quality graphics (hardcopy) in color, you would want to use a/n
Correct answer: Plotter
Question 209
Which of the following defines the area that appears just above the bottom margin of
the page?
Correct answer: Footer
Question 210
Reema is trying to find a synonym for a word in a MS-Word document. Which option
should she use?
Correct answer: Thesaurus
Question 211
Question 212
________ provide consistent style, look and feel to the entire document.
Correct answer: Themes
Question 213
Which of the following options should be used to place the selected text or character
above the normal text?
Correct answer: Superscript
Question 214
Which of the following styles is used to make the text strong or thick?
Correct answer: Bold
Question 215
Question 216
The footnote or endnote is separated from the entire text of the document by
a ________ line.
Correct answer: Horizontal
Question 217
Question 218
Question 219
The ________ feature helps you to automatically correct the spelling mistakes that
one commits while typing.
Correct answer: AutoCorrect
Question 220
Any text or graphic that you insert in a appears at the top of every page in the
document.
Correct answer: Header
Question 221
Which of the following options helps to provide the range of the pages of the
document?
Correct answer: Print Custom Range option
Question 222
Which style has been applied to the following text: ‘Now you know’.
Correct answer: Italic, Bold
Question 223
________ is a method in Microsoft Word to keep track of the alterations you make
to a document.
Correct answer: Track Changes
Question 224
Header & Footer button is located under the ____________ group of the Insert tab.
Correct answer: Text
Question 225
The ____________ tab consists of the commands that let you work with slides.
Correct answer: Slide Show
Question 226
Question 227
Question 228
To edit a chart, you can
Correct answer: Double click the chart object
Question 229
Question 230
Question 231
Question 232
What is the term used when you press and hold the left mouse key and move the
mouse around the slide?
Correct answer: Dragging
Question 233
The ____________ allow you to specify the appearance of the slides in the slide
show.
Correct answer: Transition styles
Question 234
Question 235
Which of the following is the correct path for the LOOKUP FUNCTION?
Correct answer: Formulas → Function → Lookup & Reference → LOOKUP
Question 236
Question 237
A ___________ refers to the amount of space between data and an edge of a page
in the worksheet.
Correct answer: Margin
Question 238
Question 239
Both formulas and functions must be preceded by the ___________ for Excel to
understand them.
Correct answer: Equal sign
Question 240
Question 241
Question 242
Which of the following functions is used to join two or more text strings into a single
text string?
Correct answer: CONCATENATE()
Question 243
Question 244
Question 246
Question 247
Which of the following options is not present in Highlight Cells Rules conditional
formatting?
Correct answer: Less Than
Question 248
Which of the following tabs contains the tools to check spellings, translate words,
add comments, and protect a workbook?
Correct answer: Review tab
Question 249
In the syntax of the VLOOKUP function, ___________ refers to a logical value that
specifies whether you want to find an exact or estimated match.
Correct answer: range_lookup
Question 250
Simran creates a workbook and types her name in cell A1. She noticed that the
typed name also displays at one other place in the workbook. Which is this place?
Correct answer: Formula bar
Question 251
Which of the following functions returns TRUE if all the arguments used in the
function are true?
Correct answer: AND
Question 252
Which of the following options is used for defining the print area of a worksheet?
Correct answer: Margin
Question 253
Question 254
Question 255
Question 256
Question 257