Professional Documents
Culture Documents
Bulletin #D13AE
Bulletin #D13AE
1. Since the design of balance weight fitted position of crankshaft was changed, when
fitting the existing balance weights to the new crankshaft, machining is required for
the balance weights as shown below:
OLD NEW
+0.2
Crankshaft Side "a" 37.0 28.0
0
Balance Weight 0
36.5 26.0
Side "b" 0.5
Legal Notice
Copyright 2000 by marine industrial concerns s.a..
All rights reserved. E-mail comments to Webmaster
Updated 09.11.2004