Professional Documents
Culture Documents
PCM Moineau
Tel (33) 01 41 08 15 15 - Telex 634 129 F - Fax (33) 01 41 08 15 00
Inter net: pcmpompes.com Email: pcm@pcmpompes.com
MR/MV-I Serie The monobloc range is desi- Used is all branches onf indus-
gned with geared motor (MR) try where the products are vis-
or variable speed geared motor ceous, abrasive heterogeneous,
(MV) directly flanged into the delicate and easily emulsified.
pump.
B2 B1
;;;;;;;;;;;;;;;;;;;;;
H5
; ;;;;;;;;;; ;;;;;
;;;;;;;; ;; ;;; ;; ;; ;; ;;;;;;;; ;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; ;;;;;
;;;;;;;;
;;;;;;;;;;;;;;;
H4
;;;;;;;;
; ;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
;;;;;;;; ;
;;; ;; ;; ; ;; ;
;;;;;;;;
;;;; ;;;;
;;;; ;;;;
;;;; ;;;;
;;;; ;;;;
;;;; ;;;;
;;;; ;;;;
;;;; ;;;;
;;;; ;;;;
;;;; ;;;;
;;;;;;;;
;;;;;;;;
;
;;;;;
;;;;
;;;;;
;;;
;
;;;;;;;
;;;
; ; ; ; ; ;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; ;
;;
; ; ; ; ; ;
;;;;;
;;;;;;
;;;;
;;;;
;;;;
;;;;
;;;;;;
;;
;;;;;;;;;;;;;;;
; ; ; ; ; ; ; ;
;
;;;;;;;; ;
;;
; ; ; ; ; ; ;;;;
;
;;;;;;;;
;; ;;; ;; ;; ;; ;;; ;; ;; ;; ;; ; ;;;;;;;;;;;;;;;;;;;;
; ; ; ; ; ; ; ; ;
H1
;;;;;;;; ;
;;;;;;;;;;
; ; ; ; ; ; ; ;
;
;;;;;;;;
;;;;;;;;
H3
H2
H
;;;;;;;;
L8 L7 L6
L4 L5 L3 L2 L10
L L11
A maxi
C1 - 0
C2 - 0
C-0
C1
C3
C2
C
Z : minimum dismantling space
D1 D3 D2 D : holes are drilled off centerlines
: for guidance only
Design features
Body Shaft seals
The pump body is of A48 A comprehensive range of pac-
N°40 cast-iron or AISI 316L ked gland, single or double
stainless steel construction. mechanical seal is available to
Special material available on suit all duty conditions.
request.
Inspection port, double casing Drives
for heating or cooling are also Pumps are driven by geared
available. motor or variable speed geared
motor, directly flanged into the
Rotor pump.
Depending on the product to be Frequency inverter or d.c motor
pumped, the rotor can be made are also available. Hydraulic
of hardened steel, AISI 316L motor can be supplied on
stainless steel, with or without request.
chrome plating. Other materials
are available. Options
Circulating by-pass, dry running
Stator protection device, relief valve,
Stators are moulded to metal capacity and pressure control
casings and can be made of device and many other accesso-
nitrile, ethylene propylene, hypa- ries are available.
lon, viton, neoprene or natural
rubber of various shore hard-
ness.
Rotating parts
According to rotor material and
pumped product, rotating parts
can be made of metallized
steel, AISI 316 stainless steel,
AISI 420 stainless steel, with or
without chrome plating. Other
materials are available.
MR/MV-I Serie Mounting
Type
C C2 D D2 H H4 I
MR/MV 0.4 I 10 80 16 90 65 297
MR/MV 1 I 10 80 16 90 65 350
MR/MV 1.6 I 45 140 18 130 90 1065
MR/MV 2.6 I 10 80 16 90 80 513
MR/MV 4 I 52
MR/MV 6 I5 80 16 90 80 432
F 814
MR/MV 6 I 10 95 0 16 16 112 100 I 848
MR/MV 6 I 20 95 - 14 - 112 103 1066
MR/MV 13 I5 95 0 16 16 112 100 753
MR/MV 13 I 10 95 0 16 16 112 100
MR/MV 13 I 20 140 140 18 18 130 130 1315
MR/MV 20 I4 95 70 14 16 112 103 985
MR/MV 20 I 16 140 140 18 16 130 130 1584
MR/MV 20 I 20 20 20 180 160
MR/MV 25 I5 18 130 130 764
MR/MV 25 I 10 140 18 130 130 1058
MR/MV 30 I4 140 18 130 130 980
MR/MV 35 I 20 220 200 20 20 180 180 2093
MR/MV 40 I 10 140 18 16 130 130
MR/MV 45 I5 18 130 130
MR/MV 60 I 10 220 200 20 22 180 180 1874
MR/MV 62 I5 140 120 18 18 130 130 1400
MR/MV 90 I5 140 170 18 18 130 130 1620
MR/MV 100 I 10 20 22 180 200
MR/MV 120 I5 20 22 180 190
MR/MV 180 I5 220 230 20 22 180 190 2333
1
Weight without drive
Type
C C2 D D2 H H4 I
MR/MV 0.03 ID 10 80 16 90 65 297
MR/MV 0.4 ID 80 16 90 65
MR/MV 1 ID 10 80 16 90 65 501
MR/MV 2.6 ID 10 80 16 90 80 723
MR/MV 6 ID 5 80 16 90 80 557
MR/MV 13 ID 95 0 16 16 112 100
MR/MV 40 ID 18 130 130 1360
MR/MV 40 ID 10 140 140 18 16 130 130 1834
MR/MV 62 ID 5 140 120 18 18 130 130 1760
MR/MV 100 ID 10 220 230 20 22 180 200 3630
MR/MV 150 ID 10 220 230 20 22 180 200 4670
Progressive Cavity Pumps
MR/MV-I and MR/MV-ID Range
Weight
Dimensions Connection
1
Max Max
capacity pressure Q
in m3/h in bar in L/h
500000
MR/MV 180 I 5 400000
300000
MR/MV 150 ID 10
200000
10000
MR/MV 45 I 5
8000
40 I 10 6000
MR/MV
5000
MR/MV 40 ID 10
4000
MR/MV 40 ID 5
MR/MV 35 I 20 3000
MR/MV 30 I 4
2000
MR/MV 25 I 10 1500
MR/MV 25 I 5
MR/MV 20 I 20 1000
MR/MV 20 I 16 800
MR/MV 20 I 4
600
500
MR/MV 13 I 20 400
MR/MV 13 I 10
300
MR/MV 13 ID 10
MR/MV 13 I 5
200
MR/MV 4I 52 160
MR/MV 6 I 20 100
MR/MV 6 I 10 80
MR/MV 6 ID 10 60
MR/MV 6 ID 5 50
MR/MV 6 I 5
40
MR/MV 2,6 I 10 30
MR/MV 2,6 ID 10
20
MR/MV 1,6 I 45 15
MR/MV 1 I 10
MR/MV 1 ID 10 10
8
MR/MV 0,4 I 10
MR/MV 0,4 ID 10 6
5
4
3
MR/MV 0,03 ID 10 2
10 20 30 40 50 60 70 80 90 100 200 300 400 500 700 900 1000 1500 1800
N in r.p.m.
Progressive Cavity Pumps
17 rue Ernest Laval - BP 35 - 92173 Vanves Cedex France
Tel (33) 01 41 08 15 15 - Telex 634 129 F - Fax (33) 01 41 08 15 00
Inter net: pcmpompes.com Email: pcm@pcmpompes.com
MR/MV-I and MR/MV-ID Range
Shaft sealing options
;;;
dry running.
;;;;;
;;;;
;;;;
;;;; ;;;
;;;
;;
;
;;
;;;;
;
Altavox - Phone : +33 (0)1 45 36 80 30 - Printed in France - TC/PM/MRMVI/A 03/05-98
;;;;;;
;;;;;; ;;;
; ;;
;;
;; ;;;
;;;