Professional Documents
Culture Documents
PROTECTION
L IFE S AFETY
MARINE
SAFETY
EQUIPMENTS
Catalogue n° 12
a.b.s. s.r.l.
Lombardia street, 310 - 20861 Brugherio (Milan) Italy
Tel. +39 039 83963.1 (25 lines) Fax +39 039 8396452
E-mail info@absfire.it - export@absfire.it - www.absfire.it
C
Two large
O
factories located at MILAN at side of
M P
highway
a.b.s. was founded by highly qualified staff with thirty five extinguisher, cylinders CE mark PED and T-PED or HFC
years experience in the national and international and foam bladder tanks, skid mounted units, fix
worldwide market. installations, refilling machines, fire hoses and hose reels.
First in Italy to receive CE PED 97/23 across the range, Very active in inert gas systems and HFC 227, UL Listed
and also the first ever to obtain the approval of fire and accepted by EPA extremely safe, without any
extinguishers according to European regulations EN3.7 environmental impact, and no time limit on use, particularly
and EN 1866. suitable for the protection of CED, archives museums, etc.
Active in fire protection, gaining considerable success, In order to consolidate its market presence a.b.s. has
offering the clients a full range of products. focused on “quality” of their products and services.
a.b.s. is always looking to new markets and technological Top quality products are recognized from the market and a
innovations, and its organizational structure enables best considerable production is exported in most European
solutions to any requirement. countries as well the Middle East, Asia, Africa, South
The range in which a.b.s. works varies from the fire America.
3500 articles in stock, fast delivery
A4,
A
connecting west
N to East North
YITALY
MED C E R T I F I C A T I O N S
Contents
IV Made in Italy
Marine Fire Extinguishers Optionals for the
full range.
DESIGNED & MANUFACTURED IN ITALY 98% of value produced in Italy or within Europe. Types of powder
That can be filled in all the range
of fire extinguishers
- “ABC”
Mono Ammonium Phosphate
Several MAP grade
- “BC”
Sodium bicarbonate
Karate)
43 233 Purple K
Monnex
Model 14166 tested and approved EN3.7 Tertia ABC Ruhl dry powder, has Potassium bicarbonate
the lowest enviroment imopact Potassium sulphate
by MPA of Dresden in Germany.
and the best performances. - “D” metal fires
Stainless steel non
magnetic available.
Discharge hose
Metal hose holder ring
Highly flexible hose made in EPDM rubber with an
excellent resistance, manufactured from selected
synthetic materials, complete with metal discharge
nozzle.
Powder
14666 is filled with Tertia Ruhl dry powder,
MADE IN GERMANY.
The basic components are ammonium phosphate and
ammonium sulphate with special silicone additives
enabling easy discharge and avoiding any caking Steel foot
process.
Technical data are subject to modification for improvements without prior notice
Made in Italy 5
Marine Portable Fire Extinguishers dry powder POWDER
Stored pressure 1 - 2 - 3 - 4 Kg
Best quality dry powder utilizes a specially fluidized and Cheap, efficacy, multipurpose.
siliconized Mono Ammonium Phosphate dry chemical (MAP)
certified EN615. Dirty, it requires hard work for cleaning after use.
It chemically insulates Class A fires by melting at approximately Low visibility during discharge.
170°C and coats surface to which it is applied.
It smothers and breaks the chain reaction of Class B fires and
will not conduct electricity back to the operator.
Excellent on class C fires.
German Powder
EN615
Best quality
1 Kg 2 Kg 2 Kg
8A 13 A 13 A
34BC 113BC 89BC
Wire brackets
Kg 3
Kg 2
Kg 1
14132 14142
144BC 183BC
Bracket, boat, car or truck
Standard
wall bracket
6 Made in Italy
Marine Portable Fire Extinguishers dry powder POWDER
Stored pressure 6 / 9 / 12 Kg
14666
43A 9 Kg
233BC
14191
Plastic foot
21048 Kg 6
55 A
233BC 21049 Kg 9/12
14161
34 A
233BC
12 Kg Hose belt
14172 20424 Universal
6 Kg 55 A
14160
233BC
43 A
233BC
Ø 45 mm
Back hook, ensure better Best
stability. inspection
and refilling
Large capacity cylinder
( 8.4 Lt ) benefits
for the longer jet and
constant pressure.
Foot without welding ensure
Technical data are subject to modification for improvements without prior notice
6 Kg Safety valve.
Made in Italy 7
Marine Portable Fire Extinguishers dry powder POWDER
Internal cartridge 6 / 9 / 12 Kg
Also Approved
Russian Maritime
Register of Shipping
6 / 9 / 12 Kg
Description
14167 With CO2 internal cartridge professional and allows a better
34 A
maintenance.
233BC
6 Kg German Powder ABC EN 615.
Fire extinguishers with internal cartridge respect to the stored
pressure offer several advantages.
Optionals:
- Plastic or metal foot Filling cap 74 mm allows an easy inspection for the powder and a
- Luminescent label better check for the weight of the CO2 internal cartridge.
- Stainless steel cylinder
Widely used in environments where it is necessary a professional
maintain and a visual check for the state of powder extinguishant.
German Powder
EN615
Best quality
6 Kg High Risk
14168
Fuel storage, refineries, military airports.
233BC
Best quality
capacity for extinguishing flammable liquids and gases.
BC
Typical applications in refineries, risks of oil, military risks.
8 Made in Italy
Marine Portable Fire Extinguishers dry powder POWDER
Special powder BC - High risk - Internal cartridge
Flammable stores, refineries,
military airports, flammable
department stores.
Highest Risk
Internal cartridge CO2 allows a better maintenance.
English powder, MONNEX EN 615 certified.
Basic component are Potassium Bicarbonate, Sulphate and Urea. Superb and
excellent skills for extinguishing flammable liquids and gases.
Where highest risk exists, Monnexx is the professional choise
9 Kg Powder EN615
14193 TOP quality
BC
233BC
Dry Powder
produced in
England
6 Kg
Technical data are subject to modification for improvements without prior notice
14611
German powder
34 A EN615
233BC Best quality
Made in Italy 9
Marine Portable Fire Extinguishers Foam Sealfire A.F.F.F
FOAM
Spray, Stored pressure, premixed.
Ideal for public places, lodges, stores, airports, supermarkets, hotels, etc. - Visibility for the entire time of discharge
The powder does not allow good visibility during discharge and can - Not dirty! Water 98% + 2% additive
create panic. - Ecological, biodegradable to 99,8%
Sealfire allows full visibility, it has longer discharge time, and the sealing - Easier use against flammable liquids, cooling and sealing
effect protect against flash back. effect, no flashback.
Special nozzle, allows use under electricity limited at 1,000 Volt without
danger, tested at 35,000 Volt according to EN3/7 European Standard.
- Longer time of discharge!
Spray foam is:
Cheap, efficacy, visibilty, extremely low environment impact, very Official fire test, carried
easy to use, almost zero damages after discharge. by professional
fireman as EN3.7
Not efficient on gas fire class C 233 B
6 lt Sealfire®
1 minute preburning
900 °C terrific hot
21001
Standard After only 5’’seconds.
wall bracket Flames and heat already
reduced.
5 seconds
3 Lt
14331
13 A 6 Lt 9 Lt
144B
14361 14391
27 A 34 A
233B 233B
15 seconds
After 15 second.
Sealing effect is complete.
2 Lt 6 Lt 9 Lt Reignition is no more
14366 possible.
14320 14365 EXTRAORDINARY!
Technical data are subject to modification for improvements without prior notice
8A 13 A 34 A
55B 113B 233B
10 Made in Italy
Marine Portable Fire Extinguishers Foam Sealfire A.F.F.F
FOAM
Spray, Internal cartridge 6 / 9 Lt
till -30°C.
9 Lt
14393 DIELECTRIC non conductive
CLEAN no residues
27 A
LIFEWATER only water + additive
Ø POLLUTION 100 % biodegradable
Made in Italy 11
Marine Portable Fire Extinguishers Foam Sealfire A.F.F.F
FOAM
Spray premixed, CO2 Internal cartridge 9 Lt.
- Premixed Foam with water + addittives incresase - Fully controllable foam flow thanks to the nozzle.
performances on classe A. - Common operating head makes on board refilling.
- High fire extinguishing ratings providing improved safety to
unskilled users. Tested EN3 on Electricity up to 35000 V.
- Easy operated valve, pressure lever provide cartridge
operating and dischage. Reliability
- Spray nozzle non conductive under electricity.
- CE PED in compliance with
pressure equipment directive.
- Overpressure release safety valve.
- Corrosion resistance.
Cylinder
9 Lt 43 A
- High quality steel sheet.
233 B
14395 - Shot blasting before epoxy coating.
- Corrosion resistance painting process.
- Internal corrosion protection by PVC coating.
- Hose with reinforced PVC UV resistant.
- Test CE PED under surveillance Burea Veritas.
31303_21
Spare part package Includes:
Sealed water proof polythene box,
- Foam Premixed AB.
- Filled CO2 cartridge.
- O’ ring.
- Safety pin.
Technical data are subject to modification for improvements without prior notice
- Safety seal.
- Instructions.
12 Made in Italy
Marine Portable Fire Extinguishers CO2 CO2
Carbon Dioxide 2 / 5 Kg
Excellent against fires involving flammable gases Class B. Cheap, clean..
Very good in Class C, although is suggested shut down the
source of gas leakage. Thermal shock may damage electronics, low efficacy on
class A, suggested only in initial state of development of
fires, when embers not yet involved.
Antistatic horn
HIGHER
EFFICACY
2 Kg 2 Kg 2 Kg
14221 14222 14223
34B 34B 70B
Steel 35 CrMo4
Steel 35 CrMo4
Aluminium
21009
Standard
wall bracket for 2 Kg
5 Kg 5 Kg
14252 14251
113B 113B
5 Kg
Non Magnetic 5 Kg
14252- 14253
113B 113B
This model it use a
cylinder shorter height
Technical data are subject to modification for improvements without prior notice
Dielectric horn
HIGH EFFICACY
It produce a
discharge soft
snow, insulated
antifreeze handle
Steel 35 CrMo4
21001
Standard
wall bracket
Made in Italy 13
Marine Trolleys Fire Extinguishers EN1866 + MED
POWDER
Dry powder Stored pressure
pressure gauge
It allows easy unrolling
of the hose avoiding twisting
Swivel coupling Discharge pistol with 3/8” Horn in aluminium 3/4”
It allows easy unrolling of swivel coupling. shock resistant.
the hose avoiding twisting Optional on 50 kg
Swivel
D
Detachable
frame
W
Welded
frame
H
Technical data are subject to modification for improvements without prior notice
D
W
14 Made in Italy
Marine Trolleys Fire Extinguishers EN1866 + MED
POWDER
Dry powder CO2 External cartridge
CO2 cartridge
It allows easy unrolling
of the hose avoiding twisting
Swivel coupling Discharge pistol with 3/8” Horn in aluminium 3/4”
It allows easy unrolling of swivel coupling. shock resistant.
the hose avoiding twisting Optional on 50 kg
D Swivel
Detachable
frame
W
Welded
frame
D
W
Made in Italy 15
Marine Trolleys Fire Extinguishers EN1866 + MED
POWDER
Dry powder N2 External cartridge
N
2
D Swivel
Detachable
frame
W
Welded
frame
Also Approved
Russian Maritime
H Register of Shipping
D
W
Technical data are subject to modification for improvements without prior notice
2” 4” Packing dimension
CE Capacity Code Type Type Jet Discharge
CE CE
of of valve length time H W D
Kg frame or cap mt~ sec~ cm~ cm~ cm~ kg~
14134_10 W 2” 11 25” 102 43 53.5 60
14134_11 W 4” 11 25” 102 43 53.5 60
25 14134_12 D 4” 11 25” 102 43 53.5 61
D = Detachable frame W = Welded frame. 14134_17 D 2” 11 25” 102 43 53.5 61
No welding on the The axe and carrying
14163_10 W 2” 11 41” 105 45 55 85
cylinder ensures better handle are welded on
14163_11 W 4” 11 41” 105 45 55 85
and higher safety. the cylinder body.
50 14163_12 D 4” 11 41” 105 45 55 87
14163_17 D 2” 11 41” 105 45 55 87
14166_10 W 2” 12 99” 129 54 55 160
D W 14166_11 W 4” 12 99” 129 54 70 160
100 14166_12 D 4” 12 99” 129 54 70 166
14166_17 D 2” 12 99” 129 54 70 166
16 Made in Italy
Marine Trolleys Fire Extinguishers EN1866 + MED
POWDER
Dry powder N2 External cartridge
KG 25 BC KARATE
- Certified MED MARINE (Dir. 96/98/CE).
N
2
D On request
Detachable Pistol with
frame swivel coupling 3/8”.
Cod. 21035_1
14135_12
W
Welded
frame
On request
available with
N2 pressure reducer
Technical data are subject to modification for improvements without prior notice
2” 4” 14135_10
CE
CE CE H shown with
optional 10 mt
hose
D
W
D W
14135_10 W 2” 11 25” 102 43 53.5 60
Made in Italy 17
Marine Trolleys Fire Extinguishers EN1866 + MED
FOAM
Foam Sealfire A.F.F.F. Stored pressure
pressure gauge
Swivel
Swivel coupling
It allows easy unrolling of
the hose avoiding twisting
D
W
Technical data are subject to modification for improvements without prior notice
All types fire class approved A IVB Capacity Code Type Type Jet Discharge Std. packing dimension for transport
*
of of valve length time H W D
- Stainless steel 5 years guarantee
- alternative painted inside against corrosion
Lt frame or cap mt~ sec~ cm~ cm~ cm~ kg~
1 year guarantee. 14225
* W 2” 8 34” 102 39 53.5 60
- Optional: Antifreeze up to -30°C
25
14225_1
14225_2 * D
W
2”
2”
8
8
34”
34”
102
102
39
39
53.5
53.5
61
60
14225_3 D 2” 8 34” 102 39 53.5 61
50 14254_1
14254_2 * D
W
2”
2”
8
8
45”
45”
114
114
45
45
55
55
82
80
14254_3 D 2” 8 45” 114 45 55 82
D W 14281
* W 2” 8 99” 133 55 70 160
100
14281_1
14281_2 * D
W
2”
2”
8
8
99”
99”
133
133
55
55
70
70
166
160
14281_3 D 2” 8 99” 133 55 70 166
18 Made in Italy
Marine Trolleys Fire Extinguishers EN1866 + MED
FOAM
Foam Sealfire A.F.F.F. CO2 External cartridge
- Certified MED MARINE (Dir. 96/98/CE).
Lt 50 - Lt 100 - Lt 150
- CE PED 97/23 surveillance: Bureau Veritas.
- Manufactured ISO 9001 Vision 2008 RINA Surveillance. Options:
- Top quality AFFF SEALFIRE, has the best sealing effect, - Hose from 5 up to 10 mt.
specially developed for use in portables and trolleys - Third swivel front wheel.
extinguishers. - Cap 4”, CE safety valve 1”, check valve, inspection gauge.
- Cylinder: CE PED EN 5867, sandblasted and painted with - Detachable frame may be painted, red, or black.
epoxy polyurethane powder highly resistant to bumps, UV - Antifreeze up to -30°C.
x-ray, maritime climate and industrial corrosive environment. C
O
2
Swivel
CO2 cartridge
D
Detachable
frame
W
Welded
frame
Swivel coupling
It allows easy unrolling of
the hose avoiding twisting
D
W
All types fire class approved A IVB Capacity Code Type Type Jet Discharge Std. packing dimension for transport
of of valve length time H W D
-
* Stainless steel 5 years guarantee
- alternative painted inside against corrosion
Lt frame or cap mt~ sec~ cm~ cm~ cm~ kg~
D W
14284_2
14284_3
* D
W
4”
2”
8
8
150”
150”
138
138
70
70
90
90
234
230
150 14284_4 W 4” 8 150” 138 70 90 230
14284_5 D 4” 8 150” 138 70 90 234
14284_6 D 2” 8 150” 138 70 90 234
14284_7
* D 2” 8 150” 138 70 90 234
Made in Italy 19
Marine Trolleys Fire Extinguishers EN1866 + MED FOAM
Foam Sealfire A.F.F.F. N2 External cartridge
Swivel
Swivel coupling
It allows easy unrolling of
the hose avoiding twisting
D
Detachable W
frame Welded
frame
On request
available with
N2 pressure reducer
H
D W
All types fire class approved A IVB Capacity Code Type Type Jet Discharge Std. packing dimension for transport
of of valve length time H W D
-
* Stainless steel 5 years guarantee
- alternative painted inside against corrosion
Lt frame or cap mt~ sec~ cm~ cm~ cm~ kg~
D W
14284_12
14284_13 * D
W
4”
2”
8
8
150”
150”
138
138
70
70
90
90
234
230
150 14284_14 W 4” 8 150” 138 70 90 230
14284_15 D 4” 8 150” 138 70 90 234
14284_16 D 2” 8 150” 138 70 90 234
14284_17
* D 2” 8 150” 138 70 90 234
20 Made in Italy
Marine Trolleys Fire Extinguishers EN1866 + MED
CO2
CO2 Carbon Dioxide
14311
10 KG 14321_6
Approved fire class 144
20 KG
Optional
With swivel device 3/8”
98042
It allows quick and easy
unrolling avoiding
twisting
Technical data are subject to modification for improvements without prior notice
14322 14352
All types fire class approved 233
30 KG 50 KG
! Longer hose up to 10 mt available and approved.
Code Capacity Cylinder Type Wheels Jet Discharge Std. packing dimension for transport
diameter of valve diameter length time H W D
Kg mm~ mm~ mt~ sec~ cm~ cm~ cm~ kg~
14311 10 154 25 E 300 4 17” 90 35 104.5 38
14321_6 20 230 25 E 300 4 32” 97 40 60 70 Carrying frame
14322 30 230 25 E / 1” 300 4 35” 114 49 115 85 standard yellow
14352 50 270 1” 400 4 52” 143.5 65 140 156 optional Red or Black
Made in Italy 21
Replacement spare parts, portable with internal & external cartridge
The SOLAS Convention Chapter II-2 part C lays the obligation of the provision of replacement spare change of 100% for the first 10 extinguishers
installed, while for the remaining fire extinguishers it is 50% of the replacement spare. Anyway the maximum quantity of refills requested is 60.
B
A
Technical data are subject to modification for improvements without prior notice
Spare part list for POWDER extinguisher Spare part list for FOAM extinguisher
Pos. Description 6 kg 9 kg 12 kg Pos. Description 6 lt 9 lt
( 14167 ) ( 14194 ) ( 14173 ) ( 14362 ) ( 14392 - 14392_1 )
1 Complete valve brass 20040 20040 20040 1 Complete valve brass 20824 20824
2 Siphon tube Steel pres 20728 20728 20728
3 Internal cartridge 21060 20300 20208 2 Discharge nozzle plastic 21032 21032
4 Siphon tube PVC discharge 21713 21709 21709 3 Internal cartridge 20177 20177
5 Discharge hose 20659 20659 20659
4 Siphon tube PVC 21744 21744_1
6 Powder ABC 31150 / 31140
“ Powder BC 31102 / / 5 Discharge hose 21618 21618
“ Powder MONNEX / 31101 / 6 SealfireAB® 33396 + 33397 33396 + 33397
7 Pistol 21118 21035 21035 ( 1 pc ) ( 1 pc ) ( 1 pc ) ( 2 pcs )
22 Made in Italy
Replacement spare parts, trolley with cartridge
The SOLAS Convention Chapter II-2 part C lays the obligation of the provision of replacement spare change of 100% for the first 10 extinguishers
installed, while for the remaining fire extinguishers it is 50% of the replacement spare. Anyway the maximum quantity of refills requested is 60.
Made in Italy 23
Easyfire Marine approved RINA ISO 9094
Easyfire®: automatic fire extinguishing system
It is an efficient and economical extinguishing The unit fully charged ready to use includes a strong
system specially designed for boats and yachts. wall bracket.
It is filled with the ECO CLEAN GAS OZONE A pressure gauge signs in a green area the
FRIENDLY, HFC 227 better known as FM200®. functionality of the units.
It conforms to NFPA 2001, accepted by EPA. Manufactured under survelliance of Bureau Veritas
It fully respects the Ozone layer because its ODP
is ZERO. Its use is permitted in rooms in the
presence of people.
The gas is recognized as a clean agent and it fully
respects the environment.
In case of fire, the boat’s engine room is
immediately safe in less than 10 sec.
The gas is transparent, absolutely clean, it does
not leave residues, it does not damage the engine,
and it is safe for the people and animals. The fire is
extinguished immediately the gas HFC 227 is and marked CE Tested, approved and certified ISO
released. 9094 by RINA Marine authority worldwide.
It works automatically when the temperature in the
engine room reaches 93°C.
Code Charge Diam H M3
It protects max 20 m3 Kg mm mm Room
15230 1 110 380 1,7
* HFC 227 known as FM 200®, 15231 3 130 400 5
24002 Automatic valve with OZONE AND ENVIRONMENTALLY FRIENDLY 15232 6 160 475 10
sensitive temperature set
CLEAN, does not damages computer equipment, not 15224 9 190 550 15
at 93°C. Operated also with
manual actuator. harmful for humans and animals. 15233 12 190 600 20
Optional Accessories suitable for Easyfire® and Firekill Choose only 1 accessory:
Pull lever, steel wire actuator
Electric actuator
Termocable Box pull cable
Manual actuator
need adaptor 20412 + pull lever steel wire, + a choice
47034 88°C of box
Alarm pressure switch Electronic Box pull cable 23022 Stainless steel Picture in 23022_1 Gold 24K
Technical data are subject to modification for improvements without prior notice
24 Made in Italy
Firekill Marine approved RINA ISO 9094
Manual actuator
Nozzle fixed on the top of the motor engine and remote pull cable
Thermosensitive bulb
23023 MARINE CONTROL BOX FOR FIREKILL & EASYFIRE (In alternative cheaper control box 23022)
CHASSIS IN ABS Remote CPU Technical specifications
Strong plastic housing, for best protection. Programmable with its 3 Power supply : 12Vdc
It ensures an excellent heat dissipation which buttons in most European Output relay : Max 3A
allows long periods of operation even at highest languages. Signal input : 12mA/12Vdc
climate conditions. Microcontroller : Advanced RISC 8bit
Upon system discharge, it Comunication : RS485 half duplex
Maximum connection distance shutdown engine, forced
- With double insulated cable 60 mt; ventilation, fans, electrical - Backlit LCD Display 16x2
- With shielded twisted pair cable 150 mt. system, actuate sound and - Acoustic and optical signal with led.
- Maximum ease of use visual alarm. - Programming by buttons.
- Large backlit LCD 16X2
Dashboard unit.
Simple, small, safe, it controls all the functions,
integrity, failures, and for emergency
discharge.
100% waterproof and sea climate environment
resistant. Special circuit protects against
accidental discharge, or children tampering.
CPU
weight: 230 gr
Dashboard
weight: 57 gr
Made in Italy 25
Car brackets Easyfire brackets
EASYFIRE brackets with latch, safety pin antivibration.
20917 3 kg Ø 130
Cod. Type Ø Ext. type 20910 6 kg Ø 160
20426 kg 1 85 14111
20427 kg 2 110 14121 20908 12 kg Ø 190
21040 kg 2 115 14122
20428 kg 3 130 14132
Cod. Type Ø
20094 kg 6 160
20404 kg 9/12 190
20095 kg 5 CO2 136
Brass safety pin, antivibration.
20906
Cod. CO2 Ø
20061 kg 2 104 Acc.
20916 kg 2 111 All.
20915 kg 5 152 All.
20047 kg 5 136 Acc. Technical data are subject to modification for improvements without prior notice
Universal AMERICA bracket Wall brackets for extinguishers Special brackets for CO2
20920 Can firmly hold any fire extinguisher 21001 21009 20432 Ring to fix horn on 5 kg
6/9/12 KG up to 200 mm diam. Strong steel For kg 2 CO2 CO2 aluminium cylinder (152 mm)
Wall brackets for valve
structure, 2 hard durable rubber latches with hole holder type “V” diam 110 ~ 130 mm
35 mm
20433 Ring to fix horn on 5 kg
mm CO2 steel cylinder (136 mm)
75
20431
Bracket steel
galvanized
back cylinder
Bracket
fixing
holder
20052
Wall bracket for
extinguisher with
hook welded on
the back of Horn holder
cylinder type “C”.
26 Made in Italy
MARINE Fibreglass cabinets
61131 EXTRA LUX UNIVERSAL USE
For extinguisher, or fire hose 60002_1 Foot stand
H=80 cm
56x56x22
61136
Can store 3 extinguishers 6 kg
or 2 fire hoses
69x39x26
0
x3
61132 61137 18
Fibreglass blanket
Resistant to high temperature. Protects from heat and flames. Useful to suffocate flames of kitchen pans, restaurants, home, cars mobile homes,
garages, laboratories, offices....Weight approx 420 gr/mq, thickness approx 0,40 mm. In elegant waterproof package, fixed with Velcro for rapid use.
Holes to fix in the wall or hang inside a safety cabinet. Just pull the velcro and blanket is ready to use. Rigid box
Useful to abandon the fire scene in case of unexpected accident.
92018 Dimension 90x120 cm
Flat custody 92003 180x180 cm 92021 Dimension 180x120 cm
92002 180x122 cm
92004 90x120 cm
Certified EN1869
Technical data are subject to modification for improvements without prior notice
Made in Italy 27
98200_1 “CARES” Refilling powder
98200_1 Refilling powder Extremely light to Refilling portable fire extinguishers
raise the filling head,
NEW refilling powder “CARES”, adopting a using only the hand,
system of lifting spring, no need to operate without levers.
levers or handwheels. Only 2 kg to rise, 98200_7
Technical data are subject to modification for improvements without prior notice
98271
Ratchet belt to
fix big bag
44 cm
55 cm
28 Made in Italy
“98100” CO2 REFILLING UNIT
The C02 refilling unit is designed to transfer liquid CO2 from a main - Control board
supply cylinder into a CO2 extinguisher. Small, compact trolley mounted, - Pressure gauge
easy movement. It works also with low pressure tanks where CO2 is - Swivel connection with CO2 standard thread 28,8.
stored at -20°C. It is equipped with: Motor: 220 V 50 Hz 2HP monophase. Highly suggested 3 phase.
- High pressure compressor, Flow charge rate: 4 kg / min. ( higher on request)
- High pressure suction and delivery hoses Combined with an electronic scale with display 94005/94006 it is able
- Pressure switch to charge and stop automatically with safety and precision.
- Safety valve
Spare parts for CO2 Carbon Dioxide refilling units
98100 CO2 Compressor
Safety Pressure Control 98116 98115 98113
valve switch panel Dimensions: 500x500x610
Swivel adaptor High pressure High pressure
Weight 56 kg.
Ø 21,8, 3/8”f ball valve 500 bar delivery hose
for CO2 pump for CO2 mt 1,8
21,8 swivel
3/8” m
3/8”m 3/8”f
Manometer
3/8”f
Connected to the
pump delivery
port. 2 Mt
98114 1/2” fg
CO2 Outlet Connected to the pump
High pressure
suction hose at suction port of
CO2 Inlet for CO2 mt 2
21,8 fg
Connected to
41067 master cylinder
Manual clamp
for different sizes
of extinguishers
Nitrogen cylinder
complete with
pressure reducer
Base for
transporting
extinguishers
Base for
transporting
Dimensions: Triangular wheel extinguishers
115x50x80 cm configuration for
Weight: 30 kg easy moving on stairs
Made in Italy 29
COBRA Compressors breathing apparatus
COBRA is a range of quality production of high A.b.s. have taken up the challenge of the This catalogue shows the recharge station
pressure compressors for breathable air and technological evolution and export their product line: with single-phase and three-phase
technical gases like Nitrox, Trimix, Helium, products all over the world also thanks to a electric motor.
Nitrogen. widespread distribution network offering A.b.s. compressors guarantee the fire fighters
A.b.s. kept on evolving in the mechanical area qualified service & repair. and divers quality breathable air and versatile
continuously updating planning and designing A.b.s. produce portable compressors and large- equipment.
equipment and producing ever-improving sized recharge stations.
reliable products.
condensate
drain
98066 Filling panel complete with pressure regulator. 98068 Glicerine stainless steel 98065
pressure gauge 0-400 bar for testing Filling device 300F/200M
breathing apparatus valves. bar DIN With safety valve
DIN 300 & DIN 200 225 bar
2 Outlet 2 Outlet
at 300 bar at 200 bar
30 Made in Italy
air H.P. 300 bar from 80 to 215 ltm
Filling station for air cylinder from 80 to 100 l/min
High pressure air compressor suitable to charge air compressed bottles for breathing apparatus and
scuba systems. It supplies deumidified air and filtrate through filtration and settling systems.
Technical characteristics
COMPACT FRAME
BASIC FRAME
Optional accessories
- Autostop
- 1,2 m extra filling hose
- Stainless steel frame
- Filter cartridge with CO2 catalyst
Technical characteristics
Charging rate : 215 l/min - 13 m3/h
Filling time cylinder at 300 bar:
3 lt cylinder : < 3 min
15 lt cylinder : 14 min
Working pressure : 315 bar
Rpm pumping unit : 1350
Driven by : Three-phase electric motor
Power : 4.8 Kw (440/480V - 60Hz)
Dimension
Technical data are subject to modification for improvements without prior notice
98063 98063_1
H Manual 400V 50Hz 3 phase Manual 440V 60Hz 3 phase
Optional accessories
Made in Italy 31
Marina MED / SOLAS equipment
ORION
Industrial or Naval use. Polyester high resistance, PVC internally coated.
Ø 38 mm Ø 45 mm Ø 52 mm Ø 63 mm Ø 70 mm
Cod. L = mt Cod. L = mt Cod. L = mt Cod. L = mt Cod. L = mt
57115 mt 15 57116 mt 15 57118 mt 15 57119 mt 15 57113 mt 15
57215 mt 20 57216 mt 20 57218 mt 20 57219 mt 20 57213 mt 20
57315 mt 25 57316 mt 25 57318 mt 25 57319 mt 25 57313 mt 25
57415 mt 30 57416 mt 30 57418 mt 30 57419 mt 30 57413 mt 30
The code indicates the hose without connections, specify when ordering the type of connection required.
MED
mm 45 mm 70
57224 mt 20 57227 mt 20 50002 Marine hose holder 50003 Marine hose holder
shine stainless steel shine stainless steel
Ø 45 mm. Ø 25 mm.
65 Lug 81
64126 DN 70 - Ø 16 mm 64126_4
Technical data are subject to modification for improvements without prior notice
MED
64125_10 64126_10
32 Made in Italy
Extending Rod to test smoke detectors
47037_1 TYPE “ A “ MAGIC 47037 TYPE “ B “ BASIC
With its length, this telescopic rod is suitable for maintenance of smoke With its length, this telescopic rod is suitable for maintenance of smoke
detectors, it sprays the gas inside the black rubber cap simulating the detectors, it sprays the gas inside the black rubber cap simulating the
smoke, verifying in this way the functionality of the smoke detectors smoke, verifying in this way the functionality of the smoke detectors
and in the meanwhile cleaning it from dust. and in the meantime cleaning it of dust.
Spray cartridge 47032_1 to be ordered separately. The rod is equipped
also with a magnet suitable to check the electromagnets, generally
applied on the fire doors.
47032
Bottle gas to test
smoke detectors
TYPE “B”
BASIC
Magnet suitable to
check the electromagnets,
generally applied Accessories to
on the fire doors remove smoke
Test smoke detector detector
Height mt 4,50
t 4,50
Height m
Technical data are subject to modification for improvements without prior notice
47032_1
Bottle gas to test
smoke detectors
TYPE “A” MAGIC
Magnet
Test detector for fire door
Made in Italy 33
Fire suit MED Approved
93180 Naval fireman med - solas approved.
93101 Fire crossing suit Technical data are subject to modification for improvements without prior notice
34 Made in Italy
Individual protection
93030 Breathing apparatus SOLAS/MED 6 lt cylinder filled at 300 bar mask included 60091 Wall cabinet for autobreath
Equipped with:
Main foam liquid tank (empty) capacity 20 lt.
Reserve foam liquid tank (empty) capacity 20 lt.
Foam Fluoroprotein 25+25 kg, (two drums).
Foam liquid shut-off valve.
Flexible pipe for foam liquid suction.
Foam brachpipe with injection and shut off ball valve.
Fire hose 20 mt (not included) on request.
Technical data are subject to modification for improvements without prior notice
Made in Italy 35
93187 Helmet for naval fireman 93100 Helmet Fireman EN 443 93099 Fire helmet type Gallet F1S EN 443
MED Approved 140°C/15 min / 250°C/30min 1.000°C/10sec 140°C/15 min / 250°C/30min 1.000°C/10sec
140°C/15 min / 250°C/30 min. Luminescent and Glass fibre fire fighter’s helmet with The F1 is the fire helmet used by fire brigades
reflective tapes, Polycarbonate anti-scratch and incorporated visor, leather head guard throughout Europe. An optimal protection of the
anti-fog coated visor. Flame retardant high according to EN 443 adjustable size head, the face and the neck. The F1 offers excellent
temperature resistant copolymer plastic from 52 to 62. shock absorption, face shields that are pulled out of
93040 the helmet when needed protect from chips and
Nape glare, an additional eye screen provides protection
protection for at general work.
head cap
fireman
93013 Semimask CE EN 140 93014 93016_1 93015 Full face mask with 93016
without filter Filter for semimask Multipurpose filter for CO panoramic visor. Multipurpose
(2 pieces) filter for 93015
93011 Polycarbonate face shield 93043 Antinoise earphone 93046 Ear caps 93069 Goggles mask
frame for helmet CE EN 352-1 CE EN 1661 B
93012 Polycarbonate face
shield frame for helmet
Mounting kit
93044 Holster safety belt 93194 Fireman German belt 93094 Nylon rope with 2 hooks 93045 Kevlar roop
EN361 DIN 14927/EN 358
Ø 12 mm mt 20 with 2 hooks Ø 10 mm mt 20
Technical data are subject to modification for improvements without prior notice
93042 Handbag for ADR 93042_1 ADR bag kit complete with Can be contents
accessories (EMPTY) accessories class 1, Explosive
1 Full-face gas mask
93042_2 ADR bag kit complete with 1 Mask filter - A2 B2 E2 K2
accessories class 2, compressed 2 Orange signalling lamps - fringes
gas not flamable 4 Batteries for lamps
1 PVC boots
1 Antiacid and anti-cut latex gloves as
per EN 374
4 Reflecting cones H.52 cms
1 Fluorescent waistcoat approved EN 471
1 Aluminium antispark pocket lamp at intrinsic
security
Protection for drivers supplied 1 Protection glass
in sturdy waterproof nylon 1 Antiacid, impermeable overalls
bag, 1 side pocket with zipper
closures, handles and
shoulder strap for transport.
36 Made in Italy
POWDER FIRE SYSTEM
Cylinder made of carbon steel, working pressure 12 bars tested and
Excellent extinguishing action approved CE -TPED Bureau Veritas.
The main valve is activated when the tank is pressurized.
Unique technology pressurizes the tank in less than 10 seconds.
Activation less than 10 seconds All accessories are preassembled on skid.
Equipped with high pressure nitrogen bottles, rapid discharge valve,
ABC powder, or MONNEX. pressure reducer, actuator electrical, pneumatic and manual.
Each skid has 2 extra outlets as standard to connect optionally to manual
hose reel with machine gun nozzle flow 2 kg/sec.
Almost zero residue after discharge.
Characterized by great efficiency. Employed in risk sites in presence of flammable liquids and Selector valve
gases, as in the industries of paints, oil platforms, warehouses, booths and paint lines, etc.
Dry powder knocks down the flames rapidly. Cod. Diameter
40016 1”
40010 1 1/2”
40013 2 1/2”
40006 3”
Solenoid.
Technical data are subject to modification for improvements without prior notice
24 Vcc 0.1 Ah
Connection 1/2” M
Made in Italy 37
CO2 Carbon Dioxide High Pressure
Fire Suppression Systems CO2 systems
The original "clean agent," Carbon Dioxide suppresses fire
without leaving behind water, foam or dry chemical to damage
sensitive equipment.
And because there is no agent to clean up, you are back in
business faster.
Carbon Dioxide systems are still the best fire protection solution
for many applications.
They provide automatic or manual protection for Class A, B or
C fires. Although carbon dioxide fire protection is not a new
concept, its versatility and unique benefits have kept it in high
demand.
Carbon dioxide can be applied by totally flooding an enclosed
area or locally discharging the agent directly on the surface
of the burning material.
Today’s systems are equipped with sophisticated detectors,
intelligent control panels and computer designed distribution
networks.
High Pressure Carbon Dioxide Systems are Fire Systems
recommended for hazards like semiconductor wet Innovation in
benches, control rooms and paint lines.
Fire Protection.
Whatever the application, from cylinder to nozzle,
each system is custom-designed for your specific
fire hazard.
High pressure systems use individual storage
cylinders - up to 45 kg capacity each - that can be
manifolded together for rapid simultaneous
discharge. Cylinder valves can be opened
automatically or manually, locally or remotely using
electric, pneumatic or mechanical valve actuators.
Typical Applications
38 Made in Italy
FIRE SYSTEM GAS HFC ECOLOGIC HFC 227
Various products can replace Halon 1301 forbidden as it severly damages the The extinguishing time is less than 10 seconds, compared to more than 1
ozone layer. minute of inert gases.
Lower pressure at 42 bar comparing with 300 bar.
Most known is FM200® i Identified as HFC227 from the international Lower number of cylinder.
standards as agent tor total flooding applications. Rechargeable on site.
The product is safe for humans, ecologic, and compatible with the ozone More service points can make a fast refilling.
layer. HFC 227 gas extinguishing system
In fact, its ODP = 0 and NFPA classify it as safe for total flooding application Application Area
even in presence of humans when used in the proper concentation Control rooms, Computer rooms, Telecommunication facilities, Libraries,
suggested by the standards NFPA 2001 and further updates. Nozzle
Concentration normally requested is 8%, means 633 gr/mc at 20°C. Pilot cylinder Detector
Does not leave residue, ideal to protect high value equipment such as in
museum, banks, EDP computer servers, switching rooms, archives, etc....
EPA, Environments Protection Agency and NFPA recognize it as one of most
efficient substitutes of halon 1301 available.
It is chemically very stable, and having a low ALT of 36 years it is accepted all
over the world.
Properties HFC 227 Cylinders details HFC 227 or HFC 125 Flows pipe kg/sec
The modules ready for installation include: cylinder, discharge valve 42 bar, diameter Min Max
Chemical formula: CF3CHFCF3
protection cap, gauge. tubi
Chemical name: Heptafluoropropane NOT INCLUDED: extinguishing agent, electric or pneumatic actuator. 1/2” 0.454 1.361
Molecular weight: 170 The charge and quantity of gas (not included) depend on the computer calculation 3/4“ 0.907 2.495
Boiling point a 1,013 bar 16,4 °C to be carried out by our technical department.
1” 1.588 3.855
Freezing point 127 °C 1 1/4” 2.722 5.67
HFC 227 is calculated 0.625 kg/m3. Filling Factor: 1.15 * Kg / Lt.
Critical Temperature 101,7 °C 1 1/2” 4.082 9.072
HFC 125 is calculated 0.502 kg/m3. Filling Factor: 0.93 * Kg / Lt.
Critical Pressure 29.26 bar Maximum coefficient of charge: 1.1 kg / l for HFC227 and 0.93 for HFC125 2” 6.35 13.61
Critical volume 274 cm3/mol 2 1/2” 9.072 24.95
Critical Density 573 kg/m3 The 85 and 125 Lt cylinders manufactured from A.B.S. are tested by T-PED BV 3” 13.61 40.82
The hydraulic calculation of the diameter pipes, the number of nozzles and
Vapour Pressure 20 °C 3.90 bar 4” 24.95 56.7
their diameter must be done by computerized and certified calculation, which
Liquid density at 20 °C 1410 kg/m3 allows absolute precision, the correct and homogeneous discharge. 5” 40.82 80.72
Technical data are subject to modification for improvements without prior notice
Saturated vapour density at 20 °C 31,035 kg/m3 A.B.S. have the software certificate, and the technicians with the expertise 6” 54.43 136.1
Specific volume of heated steam gained in hundreds of installations in Italy and abroad.
at 1,013 bar and 20 °C 0,1374 m3/kg
Gas extinguishing system with selector valve
Selector
valve
To the
control panel
cylinder 44010
Nitrogen pilot
Made in Italy 39
Kidde FM-200
FIRE SUPPRESSION SYSTEMS
Clean, People-Safe Fire Protection for Vital Facilities
FEATURES
• Designed for “Drop-In” Replacement for Halon Retrofit Applications
• Well Suited for Complicated Pipe Networks and Large Area
Coverage with Minimal Room for Cylinder Storage
• Optional Liquid Level Indicator
• UL Listed
• FM Approved
SYSTEM DESIGN
The Kidde GX20 system comprises a versatile range of cylinders, valves
and related components which have been selected for use with
FM-200® and have been subject to stringent testing procedures.
Flexibility, quality and reliability make the Kidde GX20 range the world’s
finest in fire safety and the equipment carries third party listing through
FM Global and the Loss Prevention Certification Board, UL2166
compliance and Lloyds Register of Shipping.
System Components:
1. Main Argonite Cylinders
Certified gas systems 2. Control Panel
3. Discharge Nozzle
40 Made in Italy
The Natural Choice in Fire Protection:
Kidde Argonite™ Suppression System
Argonite™ is an inert gas clean agent consisting of equal parts pure
Argon and pure Nitrogen.
As a clean agent, Argonite will extinguish a fire without endangering
personnel nor damaging business equipment or property.
With a simple two-gas mixture, local Argonite refilling sources may be
found throughout the world, decreasing ownership costs and minimizing
business downtime.
By using natural elements, Argonite offers an Ozone Depletion Potential
(ODP) and Global Warming Potential (GWP) of zero.
Argonite provides the fire suppression agent solution for companies,
industries and governments adopting environmentally-conscious policies.
Simple to design with a flexible installation, the Kidde Argonite system
accommodates on-site field changes more easily than other clean agent
systems. A single Kidde Argonite system may easily protect multiple
separate hazards using one common cylinder bank, which reduces
component costs and provides the flexibility demanded by businesses Kidde Fire Systems Innovation in Fire Protection.
incorporating future expansion.
Clean. A combination of naturally-occurring atmospheric elements, Trusted. At Kidde, we know a fire-related business interruption can
Argon and Nitrogen, Argonite dissipates into the air allowing an almost keep your company from being competitive in a global market. We are
immediate return to “business as usual” without the interruption of a committed to researching, developing and providing the most advanced
costly clean-up and the expense of damage to assets from suppressant fire protection technology and best customer service in the industry. We
residue. This results in fewer repair costs and reduced downtime. understand the marketplace demands an “up and running” business
world around the clock. We are dedicated to keeping industry “in
business” by keeping fires out.
Typical Applications
Technical data are subject to modification for improvements without prior notice
Made in Italy 41
Protecting Your Assets Today;
Protecting Our Environment Tomorrow...
Kidde Engineered Fire Suppression System
Designed for use with 3M™ Novec™ 1230 Fire Protection Fluid
Kidde Fire Protection is constantly striving to make our product offering as
comprehensive as possible to ensure that we will have the right system available for your
application. With that in mind, Kidde Fire Protection, together with 3M™, have designed
an engineered system that is both environmentally responsible and ideal for special
applications.
TM TM
3M Novec 1230
Fire Protection Fluid
is stored as a liquid
and discharged into the
protected space as a gas.
It puts fires out quickly by a combination
of heat absorption and chemical
interference with the flame.
Technical data are subject to modification for improvements without prior notice
Applications
Archive Stores Air Traffic Management Centres Libraries Power Generation
Art Galleries Data Processing Equipment Medical and Laboratory Equipment Process Industry Control Rooms
Museums Electronic Data Processing Facilities Military Installations Rare Book Libraries
Clean Rooms Financial Centres and Banks Offshore Oil and Gas Installations Record Storage
Computer Suites Electronics and Data Processing Pipeline Pumping Stations Substation Control Rooms
Operation Rooms Heritage Sites Petrochemical Plants Switch Rooms
Control Rooms Insurance Industry Pharmaceutical and Medical Telecom Centres
Railway Signalling Centres Internet Service Providers Facilities Universities and Colleges
42 Made in Italy
82060 Manual control monitor in Bronze or corrosion proof light alloy
CHARACTERISTICS
Body Size : 3” - Painting cycles on customer’s request
Flow rate : Less than 4500 l/min - Third-Party Certifications
Rotation with lever : 360° - Pressure gauge on outlet
Vertical rotation : +85° -50° - Drain valve
Horizontal throw : Dependent by compatible - Nozzle for thermal irradiation protection
nozzle or branchpipes - Elevation lever with compass system
Design pressure : 18 bar
Test Pressure : 27 bar
Standard base flange : Carbon steel
Outlet flange : External diameter Ø 160 mm
Final coating : Polyurethanic red coat
82061 - 82061_1 Manual control monitor in Bronze or corrosion proof light alloy for high flow rates
CHARACTERISTICS
Body Size : 4” - Painting cycles on customer’s request
Flow rate : Less than 8600 l/min - Third-Party Certifications
Rotation with lever : 360° - Pressure gauge on outlet
Vertical rotation : +90° -50° - Drain valve
Horizontal throw : Dependent by compatible - Ø 240 mm outlet flange with adaptor
nozzle or branchpipes - Nozzle for thermal irradiation protection
Design pressure : 18 bar
Test Pressure : 27 bar
Standard base flange : Carbon steel
Outlet flange : External diameter Ø 160 mm
Final coating : Polyurethanic red coat
3,6
3,4 COMPATIBLE NOZZLES
3,2 OR BRANCHPIPES
3
2,8
Foam and self inducing foam branchpipes
Cod. 82061
Theoretical pressure loss
82062 - 82062_1 Manual control monitor in Bronze or corrosion proof light alloy with double handwheel
CHARACTERISTICS
Body Size : 5” - Painting cycles on customer’s request
Technical data are subject to modification for improvements without prior notice
3,6
Cod. 82071
3,4
3,2
- Jet spray nozzles
3 Cod. 82070 - 82070_1
2,8
- Jet spray self inducing nozzles
Theoretical pressure loss
2,6
2,4
2,2
Cod. 82075 - 82075_1
2
bar
1,8
1,6
1,4
1,2
1
0,8
0,6
0,4 Weight: Cod. 82062
0,2
Bronze ~55 Kg
0
Aluminium ~32 Kg
82062_1
0 2.000 3.000 4.000 5.000 6.000 7.000 8.000 8.600
Flow rate l/min
Made in Italy 43
82070 Water/Foam nozzle
Test in still air, length dependent on flow rate and pressure at the nozzle. Flow rate : From 1000 to 3000 l/1’ calculated at 7 bar
Base flange made in carbon steel Body Material
Horizontal throw diagram
- External diameter Ø 160 mm - Stainless steel and bronze
Nozzle - 82070 - Fog jet horizontal throw
Final coating (only flange) Actuation : Manual Nozzle elevation 20° + 30°
- Polyurethanic red coat Jet type : Fog, full 40
30
Length (m)
1.000 l/min K Factor = 378
20 1.500 l/min K Factor = 567
2.000 l/min K Factor = 756
10
2.500 l/min K Factor = 945
Pressure (bar)
Length (m)
50
40 1.500 l/min K Factor = 567
Weight : 12 Kg
EXECUTIONS ON REQUEST
- Other material types for body and base flange
- Painting cycles on customer’s request
- Third-Party Certifications
82070 Horizontal throw and Jet opening 82070_1 Horizontal throw and Jet opening
Technical data are subject to modification for improvements without prior notice
44 Made in Italy
82075 Self induction water/foam nozzle
Base flange made in carbon steel Body Material Flow rate : From 1.000 to 1.500 l/1’ calculated at 7 bar
- External diameter Ø 160 mm - Stainless steel and bronze
Final coating (only flange) Actuation : Manual Horizontal throw diagram
- Polyurethanic red coat Jet type : Fog, full Nozzle - 82075 - Fog jet horizontal throw
Nozzle elevation 20° + 30°
Pick-up pipe
EXECUTIONS ON REQUEST
- Other material types for body and base flange
- Painting cycles on customer’s request
- Third-Party Certifications
- Double mixing percentage
EXECUTIONS ON REQUEST
- Other material types for body and base flange
- Painting cycles on customer’s request
- Third-Party Certifications
- Double mixing percentage
82075 Horizontal throw and Jet opening 82075_1 Horizontal throw and Jet opening
Technical data are subject to modification for improvements without prior notice
Made in Italy 45
82071 Full jet water branchpipe for monitors
CHARACTERISTICS
Body size: 3”, 4”, 5”, 6”
Body material: Stainless steel
Base flange made in carbon steel:
External diameter Ø 160 mm or Ø 240 mm
Final coating: Polyurethanic red coat
46 Made in Italy
Trailer for foam drum and monitor
Characteristics Dimension
- Trailer material : Carbon steel Height “H” : 1.150 m (Monitor not included)
- Typology : Single-axle trailer Width “L” : 2.600 m
- Drum positioning : Vertical Depth “P” : 1.450 m
- Flanged connection for monitor Weight : 230 kg (without drum)
- Working deck
- Removable side supports for easy
insertion and removal of drums Hose
- Pneumatic tires boxes
- Final coating: Parking brake
Polyurethanic red coat device with lever Casing for
- Foam casing suitable for foam 200 lt foam drum. Foam Drum
“not included”
Executions on request
- Painting cycles on customer’s request
- Hot dip galvanized trailer frame
- Triple way feeding
- Solid tyres
Feeding
Double way
with internal clapet
Feeding
Double way
with internal clapet
area either for application of a foam blanket or fire fighting. Optional Medium Expansion Foam Branch can be used.
Then unit can be easily manoeuvred to any area without difficulty. Larger Flow Inductor & Foam Branch.
The tank can be recharged whilst in use and is Suitable for use with any Medium Expansion Foam Pourer for Spills etc.
brand of foam concentrate. The system can provide Foam delivery to
any risk – Hydrocarbons or Polar solvents
Standard Features
Hose basket can be fitted for stowage of supply hose.
Rear castor wheels fitted with Parking Brake, this removing the parking
stand. This makes manoeuvrability most simple and easy.
The unit has perfect balance when both in Parked and in motion
Specification
- Trolley / Frame Mild Steel - Powder Coated
- Wheels 2 x Solid rubber with Metal rim
- Tank Polipropilene - 125 or 200 Litre with sight Glass
- Foam Branch Low Expansion -200 L / Min - Stainless Steel
- Inductor 200 L / Min -1 / 6% - Bypass Valve & Pick up Tube
- Hose 1 , 20 m with Couplings Fitted
- Flow 200 L / min @ 7 bar
- Range 15 M * @7 Bar
- Operating Time / Tank 20 Minutes @7 bar [Approx]
Made in Italy 47
Survival Craft Instructions
Photoluminescent signs satisfy the following standard: Photoluminescent signs are available in rigid pvc and
self-adhesive vinyl.
Size 150 x 150 mm.
Please enquire when ordering.
Technical data are subject to modification for improvements without prior notice
PYROTECHNICS LIFEJACKET
48 Made in Italy
Photoluminescent Identification Fire control plan & Life saving Symbols
Photoluminescent signs are available in aluminium.
Size 150 x 150 mm.
A-class division B-class division Mein vertical zone Fire damper Fire damper Fire damper
(accomodation) (machinery) (cargo)
B-class B-class hinged fire door B-class hinged fire door B-class hinged self-closing B-class hinged B-class hinged self-closing
hinged fire door watertight semi-watertight fire door semi-watertight self-closing fire door sliding fire door
Ventilation remote control Ventilation remote control Ventilation remote control Remote control
or shut off (accomodation) or shut off (machinery) or shut off (cargo) for skylight
Fire protection appliance Remote control for Fire pump (s) Remote control for emergency Emergency Fixed fire-extinguishing
or structural fire protection fire pump (s) fire pump or fire pump supplied fire pump installation CO2
plan by the emergency source of power
International Fire hydrant Fire main Sprinkler-section valve Powder-section valve Foam-section valve
shore connection section valve
Made in Italy 49
Photoluminescent Identification Fire control plan & Life saving Symbols
Photoluminescent signs are available in aluminium. Size 150 x 150 mm.
Fire extinguisher
Fire extinguisher Fire extinguisher Fire extinguisher Fire extinguisher Fire extinguisher Fire extinguisher Fire extinguisher
Powder 1 kg Powder 2 kg Powder 3 kg Powder 4 kg Powder 6 kg Powder 9 kg Powder 12 kg
Fire extinguisher
Fire extinguisher Fire extinguisher Portable foam applicator unit Fire extinguisher Fire extinguisher Fire extinguisher
Foam 6 L Foam 9 L or relevant spare tank(s) Water 9 L CO2 2 kg CO2 5 kg
Fire extinguisher Fire extinguisher Fire extinguisher Fire extinguisher Fire extinguisher Fire extinguisher
Foam 25 L Foam 100 L CO2 20 kg CO2 30 kg Powder 25 kg Powder 50 kg
Monitor Foam Monitor Powder Monitor Water Fixed fire-extinguishing placed Fixed fire-extinguishing
in protected area Foam placed in protected area CO2
Space or group of spaces protected Space or group of spaces protected Space or group of spaces protected Space or group of spaces protected
by fire-extinguishing system Foam by fire-extinguishing system CO2 by fire-extinguishing system Powder by fire-extinguishing system Water
50 Made in Italy
Photoluminescent Identification Fire control plan & Life saving Symbols
Fire alarm horn Sprinkler horn CO2 horn Halon horn Fire alarm bell Space protected by
automatic Fire alarm
Foam Powder
Foam Installation Foam nozzle Space protected by Foam release station Powder Installation Powder hose and
Foam handgun
Water Pumps
Sprinkler Installation Sprinkler Hose box with Space protected by Bilge pump Emergency bilge pump
spray/jet fire nozzle drenching system
Locker with Locker with aditional Fire axe Fire station Halon battery Remote controlled
fireman’s outfit protective clothing fuel oil valve
Emergency switchboard Emergency source for Control panel for fire Push button/switch Space or group of Space or group of Space or group of
electrical power detection and alarm for general alarm spaces monitored by spaces monitored by spaces monitored by
(generator) system smoke detector (s) heat detector (s) gas detector (s)
Made in Italy 51
Photoluminescent Identification letter & number
Emergency EXIT
Photoluminescent signs are available in aluminium.
Size 125 x 330 mm.
Technical data are subject to modification for improvements without prior notice
52 Made in Italy
Photoluminescent Identification Emergency Equipment and First aid
Floor disk markers Floor disk markers Floor disk markers Floor disk markers
Emergency exite Direction arrows Direction arrows
Made in Italy 53
TERMS AND CONDITIONS OF TRADE
1. PRICES and TERMS 11. OWNERSHIP
The goods shall be purchased or quoted on these Terms and Conditions and 1. Ownership reserved: It is expressly agreed that ownership is reserved
at prices prevailing at the order date. These Terms and Conditions shall and legal and equitable title to and property in all goods supplied by the
prevail unless varied in writing. Company is and remains vested in the Company until payment in full
has been received by the Company.
2. TERMS OF PAYMENT
1. Payment shall be either; by L/C irr and confirmed, or T/T in advance, 2. Recovery of Goods: The Company may at any time before sale of any
unless prior written agreement. Deposit is requested for non standard goods by the Customer recover and take repossession of such goods
materials. and otherwise exercise in relation to those goods any of its rights where
2. If payment is not received by the due date, then the Company may refuse those rights are also covered by common law, contract, statute or in any
delivery of further goods and stop further credit facilities. other way.
3. The Customer will pay all collection and legal costs actually incurred by
the Company (including actual solicitor/client costs) that are related to the 12. PRIVACY ACT
collection or recovery of any unpaid account. 1. The Customer authorises the Company:
(a) To collect and retain and use personal information about the Customer
3. INTEREST
(the information contained in this document) for the following:
Payments not made on due date may, at the Company’s sole discretion, bear
(i) Assessing the Customer’s credit worthiness.
interest from the date of the invoice at the rate of 2% per month until paid (or
(ii) Administering the financing, whether directly or indirectly of theCustomer
at such rate as shall be in force at the date of purchase).
contracts(s) and enforcing the Company’s rights thereunder.
4. CREDIT LIMIT (iii) Marketing goods and services provided by the Company.
The Company may cancel orders in respect of any undelivered goods or may (b) To provide the information:
with hold delivery of future orders if the Customer’s account exceeds the (i) to any person for the foregoing purposes
credit terms set by the Company. (ii) to employees and agents of the Company and any other person, in the
ordinary course of business, for any of the foregoing purposes
5. NON RECEIPT OR DAMAGE (iii) to credit agencies for the purpose of maintaining effective credit records.
All goods must be checked on receipt as to quantity and/or damage. 2. The Customer acknowledges:
Discrepancies on quantity, weight or damage must be reported by the (a) that the information is held by the Company at the address specified in
Customer to both the Carrier and the Company within 3 days from the date of this document, notwithstanding that it may also be held elsewhere by the
delivery, otherwise the claim may be rejected by the Company. The Company Company and other persons for the purposes described above.
will replace goods covered by approved claims, and transport cost at same (b) that where information can be readily retrieved the Customer shall have
conditions of original order. access to it, the right to request correction and the right to be notified of
action taken in response to any such request, subject to payment of
6. RETURNED GOODS any reasonable charge.
No goods shall be returned for credit without the Company’s prior written (c) that the aforesaid authorisations are irrevocable.
approval.
13. PERSONAL GUARANTEE OF COMPANY DIRECTORS OR TRUSTEES
7. CLAIMS If the Customer is a company or trust, the director(s) or trustee(s) signing
All claims regarding goods supplied or allegations regarding goods not this contract, in consideration of the Company agreeing to supply goods and
having been supplied as per invoice/packing slip shall be made within 3 days grant credit to the Customer at their request, also sign this contract in their
of delivery of the goods and in the absence of any claim the Customer shall personal capacity and jointly and severally personally undertake as principal
be deemed to have accepted the terms of the invoices as correct and accept debtors to the Company the payment of any and all monies now or hereafter
that the goods specified are as delivered. owed by the Customer to the Company and indemnify the Company against
non-payment by the Customer.
8. CLAIMS RETURN POLICY Any personal liability of a signatory here to shall not exclude the Customer
1. Goods supplied in error are returnable for replacement or credit, providing in any way whatsoever from the liabilities and obligations contained in this
the error is notified to the Company in writing within 3 days of delivery. contract.
2. No claim will be recognised unless the goods are returned with the The signatories and Customer shall be jointly and severally liable under the
original invoice/packing slip, or the number and date of the invoice/ terms and conditions of this contract and for payment of all sums due
packing slip are enclosed. hereunder.
3. No claim will be recognised unless the returned goods are in sealeable,
undamaged and clean condition, and in the original packaging, complete 14. VALIDITY.
with detachable accessories and instruction manuals. If a term or condition herein is held by a Court to be unenforceable then such
4. The Company may at its sole discretion accept the return of goods term or condition shall be severed from all other terms and conditions
surplus to the requirements of the Customer in which event the credit may without affecting the enforceability of those other terms and conditions.
not exceed 75% of the original amount charged for those goods.
15 Jurisdiction:
9. RISK AND DELIVERY Any dispute concerning these conditions will be competent the court of
Risk passes to the Customer on delivery of the goods. Delivery shall be Milan Italy.
deemed complete when the Company gives possession of the goods directly
to the Customer, or possession of the goods is given to a carrier, courier, or 16: Solve et repete
other bailee for the purposes of transmission to the Customer. Buyer expressely waives the right to plead any exceptions to avoid or delay
payment of the debit under these terms, untill full payment in full in favour of
10. WARRANTY the supplier.
1. Except as provided in the European Communities rules, and by the
manufacturer’s written warranty (if any) the Company makes no
representation, condition, warranty or promise, express or implied, in
respect of goods supplied to the Customer.
Name:...................................................................................................
2. Except as provided in the European Communities rules, the Company
Technical data are subject to modification for improvements without prior notice
shall not be liable for any loss of any kind whatsoever suffered by the
Customer as a result of a breach of any of the Company’s obligations
regarding the supply of goods or any negligence on the part of the Street....................................................................................................
Company, its servants, agents or contractors, nor shall the Company be
liable for any loss damage or injury caused to the Customer’s servants,
agents, contractors, customers or other persons. The Customer will
Zip Code ................City........................................................................
indemnify the Company against any claim by such persons.
3. The liability of the Company arising from a breach of any of the
Company’s obligations regarding the supply of goods, or from any
negligence on the Company’s part, its servants, agents or contractors VAT number...........................................................................................
will be limited to damages which will not exceed the price of the goods
supplied.
4. Where the Customer purchases goods for a particular purpose, it is the Email...................................................................................................
Customer’s sole responsibility to ensure that the goods will be suitable
for the Customer’s purpose, and the Company shall have no liability
whatsoever in the event that the goods are not fit for the Customer’s
purpose, notwithstanding any statements made to the Customer by the Tel/fax/mobile........................................................................................
Company or its officers or employees.
I/We …………………………………………………………………..........……….. accept the above Terms and Conditions of Trade points 1 to 16
Name of Company or Account Name)
Signed in agreement: ……………………………………………….…………….……. Witness Signature: ……………….………….…………………………...........……..…….
Full Name: ……………………………………………………. Date: ……….……… Full Name: ……………………………………………………. Date: ..…..................…….…
54 Made in Italy
Maintenance of Portable fire extinguishers
Maintenance Dry powder: in England it is a requirement to make a discharge test
There does not exist one Standard valid in all European countries. every 5 years. In Germany discharge, check for impurities or caking, and
Italian Standard 9994 is the most restrictive rule existing in Europe, refill after filtering, these are requirements different in other countries.
requiring service every 6 months, while in most countries it is once A good rule is check at least every 2 years. If the powder appears fine,
per year, or every 2 years. Here below are some good suggestions: with a good fluidity and smoothness, without any caking, that means its
Survelliance chemical and physical properties are intact, and it is still good to be used.
Visual inspection of correct position and installation: every day. Generally a good powder manufactured and approved according to
Maintenance EN615, kept in sealed fire extinguishers, within temperature
Must be made by an authorized technician. Series of control and -30°C + 60°C will not change its chemical and physical properties.
maintenance with purpose to ensure the correct functionality of the Replace the powder if it starts caking and has low fluidity.
extinguisher. Inspection of pressure, weight, integrity of all components. Foam: when it is a premixed solution it is a good rule to change and
Refilling recharge with fresh solution every 3 / 5 years, check the instructions of
Must be made when the extinguisher has been used even partially. the manufacturer.
When the gauge shows low pressure, and needle is in the red area, or When the foam compound is sealed in a plastic cartridge and not in
weight is less than recorded in the service card. contact with sunlight and water, validity is at least 5 years. Follow the
Disposal instructions of the manufacturer.
Must be made according to regulations in the customers own country. Test: Hydraulic test of cylinder, the rule valid in all Europe is every 12
CO2 carbon dioxide and Halogenated FOXER do NOT need to be years. For cylinders produced with CE PED mark. CO2 cylinders with CE
changed, they never change their properties when stored in the fire PED or T-PED mark every 10 years.
extinguisher.
Water fire extinguishers are good for tackling class A The downside is that they are strictly for class A use Water fire extinguishers work by
fires involving burning wood, paper, textiles and only and can make the fire worse or be very cooling and quenching a fire, thereby
general combustible materials. They don’t contain any dangerous to the user if used on the other classes of absorbing heat from the fire and
WATER harmful chemicals or residual agents and they are fire. reducing its temperature below the
kind to the environment. As water fire extinguishers For example, water conducts electricity and thereby critical level needed to sustain the fire.
are cleaner than other extinguishing agents, they are a presents a risk of electrocution to the user, so this type
S e a l f i r e® good choice for assisting in the emergency egress of fire extinguisher must never be used on live
from a building when cited along escape routes where, electrical equipment.
Technical data are subject to modification for improvements without prior notice
for example, a powder extinguishing agent could enter In addition, burning oils and water most definitely do
the eyes of the user due to forward movement into the not mix and can create an explosion or fireball!
powder residue or other factor.
Foam extinguishers are especially suitable for class B Cannot be used on domestic chip or fat pan fires. Foam fire extinguishers work by
FOAM flammable liquid fires such as paints, thinners, petrol, covering a fire with a film of foam that
and oil spills. Foam is also very effective on class A starves it of oxygen and prevents re-
S e a l f i r e® fires such as man-made furnishings. They have a
higher class A fire rating per litre than their water
ignition, in addition to penetrating
absorbent materials and having cooling
counterparts and can therefore be more lightweight and quenching properties due to the
and portable, making them a good choice for an office water content.
fire extinguisher.
Carbon Dioxide (CO2) fire extinguishers are safe for As CO2 does not cool the fire very well, there is a risk CO2 fire extinguishers work by
CARBON use on electrical appliances and are non-residual, of the fire re-igniting. displacing oxygen at the source of the
making them ideal for use in office environments Fumes from CO2 extinguishers can be harmful if used fire with an inert gas, thereby starving
where sensitive computer equipment would be in confined spaces. the fire of the oxygen that is essential to
DIOXIDE damaged by using other types of extinguishing agents. The horn freezes during discharge, so care must be the combustion process.
taken not to touch it. They also have some cooling properties.
Clean agent (Clean Green, Clean Blue, Foxer S) fire Rapid vaporization of the gas they have to be limited Clean Agent fire extinguishers work by
CLEAN AGENT extinguishers are safe for use on electrical appliances outdoor. displacing oxygen at the source of the
and are non-residual, making them ideal for use in Costs more than most extinguishing agent. fire with an inert gas, thereby starving
HFC office environments where sensitive computer
equipment would be damaged by using other types of
the fire of the oxygen that is essential
to the combustion process.
extinguishing agents.
FOXER Do not leave residues, and is safe for humans and
animals.
Made in Italy 55
a.b.s. s.r.l.
Lombardia street, 310 - 20861 Brugherio (Milan) Italy
Tel. +39 039 83963.1 (25 line) Fax +39 039 8396452
E-mail info@absfire.it - export@absfire.it - www.absfire.it
HOW TO REACH US
By car:
A4 Milano - Venezia exit Agrate B.
or Tangenziale Est (Ring-way)
exit 12 Cologno Monzese.
By plane:
Milano Malpensa 70 Km
Milano Linate 16 Km
Bergamo Orio al Serio 35 Km
By train: time 30 min.
Milano Centrale Station,
subway green line 2, stop to
Cologno Monzese, + bus 5 km.