Professional Documents
Culture Documents
2023 Catalog Hand Tools
2023 Catalog Hand Tools
PROFESSIONAL
138 139 140 143 HAND TOOLS
Mini Grease Gun Battery Powered Cordless Grease USB Rechargeable
Push Type Grease Gun Gun 20V Battery
Grease Gun
Oil Pump Plastic Funnel Set Digital Fuel Meter Dual Plane Fuel
Kits With 4 Pieces Professional Nozzle Swivels
Drum Cart
Handle
4 spring steel bars that run through the SANS 387:2014
handle are locked with the hammer
head using steel locking plate, ensuring
STEEL that the head never gets dislodged
RUBBER HANDLE
Absorbs
impact & SPECIFICATIONS
vibration WORKING
reducing TEMPERATURE -10°C TO 50°C
RANGE
user
fatigue WARNING *
Do not strike objects harder
than 46 HRC. Striking items of
a greater hardness is liable to
cause fracture or chipping Steel Locking Plate 4 Spring Steel Bars Ergonomic Rubber Grip
Handle
india@groz-tools.com 9
STRIKING TOOLS
Indestructible Handle
The ‘BIG BOY’ of hammers, Groz Sledge
Hammers with patented Indestructible BS 876
For material, hardness
handle are designed to take a heavy beating
& performance
Handle
4 - 6 spring steel bars that run through the SANS 387:2014
handle are locked with the hammer head
using steel locking plates ensuring that the
head never gets dislodged Steel Locking Plate
Head
Available in 2 types
a. Heavy Duty 50-58 HRC Head*
b. Soft Face 30 HRC Head Ergonomic Rubber Grip
Heavy Duty Soft Face
Handle
WARNING *
SPECIFICATIONS
Do not strike objects harder
WORKING than 46 HRC. Striking items of
TEMPERATURE -10°C TO 50°C a greater hardness is liable to
RANGE cause fracture or chipping
ORDERING INFORMATION
a. Heavy Duty 50-58 HRC Head* ORDERING INFORMATION b. Soft Face 30 HRC Head
Forged from special steel, the hammer Forged from special steel, the hammer CAT HEAD OVERALL BOX
CAT HEAD OVERALL BOX
head is induction case hardened 50-58 head is induction case hardened & then NR. WEIGHT LENGTH QTY.
NR. WEIGHT LENGTH QTY.
HRC. These hammers are especially tempered to reduce hardness within (LBS) (KG) (INCH) (MM)
(LBS) (KG) (INCH) (MM)
useful in demolition work where the 30-35 HRC. Softer head is designed to SHID/SF/6/30 6 2.7 30 750 4
struck surface is softer than the SHID/6/24 6 2.7 24 600 4 mushroom when striking harder base
SHID/SF/8/30 8 3.6 30 750 4
hammer head SHID/6/30 6 2.7 30 750 4 materials. Prevents damage to struck
SHID/SF/10/30 10 4.5 30 750 4
º SHID/8/24 8 3.6 24 600 4 work pieces.
UTILITY SHID/SF/12/30 12 5.5 30 750 4
º SHID/8/30 8 3.6 30 750 4
• Driving in stakes UTILITY SHID/SF/14/36 14 6.3 36 900 4
SHID/8/36 8 3.6 36 900 4
• Heavy demolition work • Agriculture
• Construction: fracturing stone & SHID/10/30 10 4.5 30 750 4 • Automotive
concrete SHID/12/30 12 5.5 30 750 4 • Overground mining
• Driving fence posts º SHID/14/30 14 6.3 30 750 4 • Railroad
• Police, fire & rescue SHID/20/36 20 9 36 900 2 • Maintenance of cutting tools
• Rebar work
Ø Best Seller ¿ New
• Railroads
• Bending & shaping metal
10 www.groz-tools.com india@groz-tools.com 11
STRIKING TOOLS
SPECIFICATIONS SPECIFICATIONS
WORKING WORKING
TEMPERATURE -10°C TO 50°C TEMPERATURE -10°C TO 50°C
RANGE RANGE
Steel Locking Plate 4 - 6 Spring Steel Bars Ergonomic Rubber Grip Steel Locking Plate 4-6 Spring Steel Bars Ergonomic Rubber Grip
Handle Handle
ORDERING INFORMATION
CAT HEAD OVERALL BOX ORDERING INFORMATION
NR. WEIGHT LENGTH QTY.
CAT HEAD OVERALL BOX
(LBS) (KG) (INCH) (MM) NR. WEIGHT LENGTH QTY.
CHID/2.5/12/CU 2.5 1.1 12 300 8 (LBS) (KG) (INCH) (MM)
CHID/2.5/16/CU 2.5 1.1 16 400 8 º SHID/2.5/12/BR 2.5 1.1 12 300 8
º CHID/4/12/CU 4 1.8 12 300 8 º SHID/4/12/BR 4 1.8 12 300 8
CHID/4/16/CU 4 1.8 16 400 8 SHID/4/16/BR 4 1.8 16 400 8
º SHID/8/24/CU 8 3.6 24 600 4 ¿ SHID/6/30/BR 6 2.7 30 750 4
º SHID/14/30/CU 14 6.3 30 750 4 ¿ SHID/8/30/BR 8 3.6 30 750 4
NON-SPARKING NON-MARRING SPARK RESISTANT NON-MARRING
Ø Best Seller Ø Best Seller ¿ New
12 www.groz-tools.com india@groz-tools.com 13
STRIKING TOOLS
UTILITY
• Bending & shaping metal
4 Spring Steel Bars
• Driving punches & chisels ORDERING INFORMATION
• Concrete & stone work
CAT HEAD WEIGHT OVERALL LENGTH BOX WARNING
• Hand forging SPECIFICATIONS
NR. QTY. Do not strike objects harder
• Setting rivets Heavy Duty Soft Face (LBS) (KG) (INCH) (MM)
WORKING than 46 HRC. Striking items of
• Peen riveted & welded material CPID/2/16 2.5 1.15 16 400 8
TEMPERATURE -10°C TO 50°C a greater hardness is liable to
• Texturing face of metal º CPID/3/16 3.5 1.60 16 400 8 RANGE cause fracture or chipping
Ø Best Seller
Head
Available in 2 types
07 Claw Hammer
SPECIFICATIONS CLID
WORKING
TEMPERATURE -10°C TO 50°C
Indestructible Handle
RANGE
14 www.groz-tools.com india@groz-tools.com 15
STRIKING TOOLS
25%
Head
Forged from fine-grained special steel SANS 387:2014
the heads are induction hardened
50-58 HRC for increased durability
Handle
ORDERING INFORMATION
FIBREGLASS CAT HEAD OVERALL BOX
HANDLE NR. WEIGHT LENGTH QTY.
(LBS) (KG) (INCH) (MM)
Double injection SHORT HANDLE
moulded Well SHFG/2.5/16 2.5 1.1 16 400 8
handle for balanced SHFG/4/16 4 1.8 16 400 8
increased hammer LONG HANDLE
strength, durability head to SHFG/6/36 6 2.7 36 900 4
& overstrike handle ratio SHFG/8/36 8 3.6 36 900 4
protection optimised SHFG/10/36 10 4.5 36 900 4 WARNING
16 www.groz-tools.com india@groz-tools.com 17
STRIKING TOOLS
Head
Fully forged head is induction hardened
50-58 HRC and tempered for maximum BS 876
For material, hardness
Forged from fine-grained special steel strength and durability & performance
the heads are induction hardened
50-58 HRC for increased durability Duly machined and polished faces are
beveled to prevent chipping
Handle
Lightweight yet durable dual injection Handle
moulded fibreglass handle for Lightweight yet durable dual injection
controlled and balanced swing moulded fibreglass handle for controlled
and balanced swing
Designed with a 25% wider neck,
handles are covered with a Designed with a 25% wider neck, handles
polypropylene jacket for protection are covered with a polypropylene jacket
against overstrikes for protection against overstrikes
TPR grip on handle absorbs shock and TPR grip on handle absorbs shock and
vibration and provides a non-slip grip vibration and provides a non-slip grip
UTILITY UTILITY
• Bending & shaping metal • Striking cold chisels, concrete chisels &
• Driving punches & chisel brick bolsters
• Concrete & stone work • Drive in stakes
• Hand forging • Rebar into the ground
• Setting rivets • Break through concrete floors
• Peen riveted & welded material
• Texturing face of metal
ORDERING INFORMATION
18 www.groz-tools.com india@groz-tools.com 19
STRIKING TOOLS
11 Engineer’s Hammers
12 Blacksmith’s/ Cross Pein Hammers
EHFG BHFG
Designed with a 25% wider neck, Designed with a 25% wider neck,
handles are covered with a handles are covered with a
polypropylene jacket for protection polypropylene jacket for protection
against overstrikes against overstrikes
TPR grip on handle absorbs shock and TPR grip on handle absorbs shock and
vibration and provides a non-slip grip vibration and provides a non-slip grip
UTILITY UTILITY
• Tile & Drywall Demolition Light metalworking & shaping jobs by -
• Setting brick & tile • Metalworkers
• Welders
• Contractors
• Tradesmen
• Serious DIY’ers
20 www.groz-tools.com india@groz-tools.com 21
STRIKING TOOLS
13 Claw Hammer
14 Double Face
CLFG HMR-SF
ORDERING INFORMATION
CAT DESCRIPTION BOX
NR. QTY.
HMR/SF/25 Mallet with plastic & rubber head 8
KIT/HMR/SF/4ST Mallet with plastic & rubber head 8
fitted, copper & brass head as spares
SPARE HEADS
ORDERING INFORMATION WARNING
HD/PR/HMR/25 Red plastic head 10
CAT HEAD WEIGHT OVERALL LENGTH BOX Do not strike objects harder than 46 HRC. Striking
HD/PB/HMR/25 Black rubber head 10
NR. QTY. items of a greater hardness is liable to cause
(GMS) (OZ) (INCH) (MM) fracture or chipping. Do not use a claw hammer for HD/BR/HMR/25 Brass head 10
CLFG/16/13 450 16 13 330 12 striking cold chisels or for pulling out masonry nails HD/CU/HMR/25 Copper head 10
22 www.groz-tools.com india@groz-tools.com 23
IMPACT & RATCHET IMPACT & RATCHET WRENCHES
WRENCHES 15 3/8"
Impact Wrench
IPW-200 SERIES
Forward
reverse
control
ROCKING DOG JUMBO TWIN HAMMER IMPROVED PIN-LESS CONSTRUCTION Aluminium Composite
Impact Wrench
IPW - 301 IPW - 302 IPW - 304 IPW - 305 IPW - 306
Forward
reverse
control
4 speed position 4 speed positive control, 3 speed position control, 3 speed position control
6 speed position
control full power in reverse full power in reverse Full Power in reverse
control
ORDERING INFORMATION
CAT BOX
NR. QTY.
IPW/301 6
IPW/302 6
IPW/304 6
IPW/305 6
IPW/306 6
26 www.groz-tools.com india@groz-tools.com 27
IMPACT & RATCHET WRENCHES
17 1/2" Angle
18 3/4"
IPW-300 SERIES IPW-400 SERIES
SCAN TO
WATCH
ORDERING INFORMATION
ORDERING INFORMATION CAT BOX
NR. QTY.
CAT BOX
NR. QTY. IPW/401 4
IPW/307 6 IPW/402 4
28 www.groz-tools.com india@groz-tools.com 29
IMPACT & RATCHET WRENCHES
m) Anvil
6" (150 m
mm)
9" (229
ORDERING INFORMATION
CAT BOX ORDERING INFORMATION
NR. QTY. CAT BOX
IPW/501 1 NR. QTY.
IPW/502 1 IPW/503 1
30 www.groz-tools.com india@groz-tools.com 31
TOOL STORAGE & ASSORTMENTS
21 3/8"
23 Nylon
RTW NTB-1 NTB-2
Robust & durable aluminium housing SPECIFICATIONS Durable, high quality water and abrasion TOOL BAGS
*MAX TORQUE *@15 SEC 68 Nm resistant denier polyester tool bags. Double
Chrome Molybdenum anvil guarantees FREE SPEED 150 RPM layered construction for enhanced durability
high performance in the toughest
AVR. AIR CONSUMPTION 170 LPM (6 CFM)
applications Tool Bags
AIR INLET SIZE 1/4" Wide opening for easy access to contents
Optimized gear ratio and air flow for AIR HOSE I.D. 3/8"
reliable performance NET WEIGHT 1.17 KG Easy pull heavy duty zipper
NUT CAPACITY (MAX) M6
Easy to use forward/reverse control Handle stitching area reinforced for
USAGE INTENSITY INTENSIVE
maximum durability NTB-3
Throttle lever design for easy speed Medium
control Rigid and waterproof base with TPR knobs to
prevent damage from floor
Excellent for body shop repair jobs and
light duty work under the dashboard Shoulder strap with cushioned rubber
reinforcement on shoulder level
Back Pack
Multiple pockets and division for organized
tooling
ORDERING INFORMATION
CAT DRIVE OVERALL BOX Safe and secure laptop and A4 document
NR. LENGTH QTY. compartment
NTB-1
(INCH) (INCH) (MM) Large
Cushioned shoulder straps for ergonomic
RTW/3-8/STD 3/8 10.5 267 15
and convenient carriage
Ratchet Wrenches
SPECIFICATIONS
Robust & durable aluminium housing
*MAX TORQUE *@15 SEC 68 Nm
Chrome Molybdenum anvil guarantees FREE SPEED 150 RPM
high performance in the toughest AVR. AIR CONSUMPTION 170 LPM (6 CFM)
applications AIR INLET SIZE 1/4"
AIR HOSE I.D. 3/8" NTB-2
Optimized gear ratio and air flow for X-Large
reliable performance NET WEIGHT 1.17 KG
NUT CAPACITY (MAX) M6
Easy to use forward/reverse control USAGE INTENSITY INTENSIVE BACK PACK
Throttle lever design for easy speed
Tools not included
control
ORDERING INFORMATION
CAT LOAD CAPACITY DIMENSIONS SIZE BOX
NR. QTY.
ORDERING INFORMATION (KG) (LBS) (INCH) (MM)
NTB/1 30 66 16.5 × 10.2 × 11.8 420 × 260 × 300 Large 1
CAT DRIVE OVERALL BOX
NR. LENGTH QTY. NTB/2 60 132 17.9 × 11.0 × 11.8 455 × 280 × 300 X-Large 1
(INCH) (INCH) (MM) NTB/3 10 22 12 × 9 × 5.5 300 × 225× 140 Medium 1
RTW/1-2/STD 1//2 10.5 267 15 NTB/4 - - 19.2 × 13.7 × 16.9 490 × 350 × 430 - 1
NTB-4
32 www.groz-tools.com india@groz-tools.com 33
TOOL STORAGE & ASSORTMENTS
Workstations MTB-50
45 KG 450 KG
Castors feature
2 fixed and 2 swivel
MTB-12 with toe lock
MTB-7 MTB-50
12 Drawer Portable Workstation 7 Drawer Portable Workstation 5 Drawer Portable Workstation
DRAWER WIDTH DEPTH HEIGHT NO. OF DRAWER WIDTH DEPTH HEIGHT NO. OF DRAWER WIDTH DEPTH HEIGHT NO. OF
DRAWERS DRAWERS DRAWERS
(INCH) (MM) (INCH) (MM) (INCH) (MM) (INCH) (MM) (INCH) (MM) (INCH) (MM) (INCH) (MM) (INCH) (MM) (INCH) (MM)
A 36-5/8 928 15-1/8 385 4-3/8 112 1 A 22-3/8 568 15-1/8 391 2-5/8 62 5 A 23-1/4 590 18-1/8 460 3 75 3
B 22-3/8 568 15-1/8 385 2-7/8 74 5 B 22-3/8 568 15-1/8 391 5-3/8 137 2 B 23-1/4 590 18-1/8 460 6 154 2
C 22-3/8 568 15-1/8 385 6 153 1
D 11-5/8 297 15-1/8 385 2-7/8 74 4
E 11-5/8 297 15-1/8 385 9-1/8 232 1
Height
(H)
ORDERING INFORMATION
CAT DIMENSION (W×D×H) BOX Height (H)
NR. QTY.
(INCH) (MM)
MTB/12A/WD 42 × 18 × 39 1067 × 457 × 985 1
Depth (D)
Depth (D)
MTB/7A 27 × 18 × 39 686 × 457 × 985 1 Width (W)
34 www.groz-tools.com india@groz-tools.com 35
TOOL STORAGE & ASSORTMENTS
TRAY 2
1 pc 175 mm
Bent
Circlip Plier - External
1 pc 175 mm
Straight
Circlip Plier - External
1 pc 175 mm
Bent
1 pc Adjustable Wrench 375 mm
Tools
supplied
with
Offset Ratcheting Ring
trolley 5 pcs 6 × 8, 10 × 11, 13 × 14, 15 × 17, 19 × 21 mm
Spanners
TRAY 3
QTY. CONTENT OF TOOL SIZE IMAGE
TROLLEY
25 Offset Combination 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25,
7 pcs 1/4" Hex Bit Sockets 3, 4, 5, 6, 7, 8, 10 mm pcs Spanners 26, 27, 28, 29, 30 mm
13 pcs 1/4" Hex Sockets 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
3 pcs 1/4" Slotted Bit Sockets 4, 5.5, 7 mm
3 pcs 1/4" Philips Bit Sockets PH1, PH2, PH3
8 pcs 1/4" Torx Bit Sockets T8, T10, T15, T20, T25, T27, T30, T40 3 × 75, 4 × 100, 4 × 100, 6.5 × 38, 6.5 × 100, 6.5 × 150,
7 pcs Flat Screwdriver
8.0 × 150 mm
9 pcs 1/4" Hex Sockets Deep 5, 6, 7, 8, 9, 10, 11, 12, 13 mm
1 pc 1/4" Ratchet Handle
3 pcs 1/4" Pozi Bit Sockets PZ1, PZ2, PZ3 4 pcs Philips Screwdriver PH1 × 75, PH2 × 100, PH2 × 38, PH3 × 150
TRAY 4
Set of
Tamper Torx Star Keys T9, T10, T15, T20, T25, T27, T30, T40
1 pc Spinner Handle 1/4" 8 pcs
1 pc Sliding T Bar 1/4"
TRAY 1
36 www.groz-tools.com india@groz-tools.com 37
TOOL STORAGE & ASSORTMENTS
TRAY 2
Tools
supplied
with
trolley
TRAY 3
TRAY 1
ORDERING INFORMATION
CAT IDEAL FOR BOX
NR. QTY.
MTB/7/84/AU 4 wheeler workshops 1
38 www.groz-tools.com india@groz-tools.com 39
SERIES A - Full Size
TOOL STORAGE & ASSORTMENTS
15-5/32" (385mm)
27 Tool KIT-MOD
Assortments
INSTANT ACCESS TO TOOLS!
Tool assortments available in 3 modular sizes:
GROZ offers two coloured modular 22-1/4" (565 mm)
system of foam tool kits designed for
ultimate safety and efficiency QTY. CONTENT OF TRAY SIZE IMAGE
CAT NR. KIT/MOD/11A BOX QTY. 1
A solution for each usage: DIY,
1 pc Cat Bar 16"
automotive repair, industrial
1 pc Chisel Blade Width: 1" (25 mm), Overall Length: 10" (250 mm)
maintenance etc.
1 pc Ball Pein Indestructible Head Weight: 24 oz. Handle Length: 14 "
Handle Hammer
Ultimate Safety
No more looking around the drawer 1 pc Double Face Plastic Mallet 25 mm
and risking injury SERIES A SERIES B SERIES C 4 pcs Pin Punch Set 1.5, 3, 4, 5 mm
FULL SIZE 2/3 SIZE 1/3 SIZE 1 pc Retra Knife
Separate space for each tool prevents
1 pc Hacksaw Frame 12" with Bi-metal Blade
them for lying around here and there
10 pcs Bi-Metal Hacksaw Blade 8% 12"
WIDTH DEPTH HEIGHT MODULE Cobalt - HSS
No Loss SIZE
(INCH) (MM) (INCH) (MM) (INCH) (MM) CAT NR. KIT/MOD/13A BOX QTY. 1
Tools can be located immediately and
Series A 22-1/4 565 15-5/32 385 1-3/16 30 Full Size 26 pcs Deep Offset Combination 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25,
replaced at the appropriate position
after use ensuring no loss Series B 15 380 15-5/32 385 1-3/16 30 2/3 Size Spanners 26, 27, 28, 29, 30, 32 mm
Series C 7-9/32 185 15-5/32 385 1-3/16 30 1/3 Size
Compatible with GROZ Portable
Workstations, Tool Cart & Tool Chest *Applicable for standard trolley drawer size (internal) of 568 × 391 mm
Option of fitting
1 pc of Series A Modular Kit
40 www.groz-tools.com india@groz-tools.com 41
CAT NR. KIT/MOD/35A BOX QTY. 1 CAT NR. KIT/MOD/45A BOX QTY. 1
1 pc 1/2" Slim Line Ratchet Handle 4 pcs Pin Punch Round Shank 1/16,1/8,5/32, 3/16
4" (100 mm)
5 pcs 1/2" Hex Sockets - Deep 10, 14, 17, 19, 21 mm
1 pc Adjustable Wrench 10" (250 mm)
6 pcs 1/2" Spline Bit Socket 55 mm length: M6, M8, M10; 100 mm length: M8, M10,
M12 1 pc Water Pump Plier 10" (250 mm)
9 pcs 1/2" Torx Bit Socket T20, T25, T27, T30, T40, T45, T50, T55, T60 1 pc Self Locking Plier 10" (250 mm)
8 pcs 1/2" Hex Bit Socket 5, 6, 7, 8, 10, 12, 14, 17 mm 1 pc Double Face Mallet 25 mm
1 pc Professional Ratcheting Drive: 1/2"; Torque Range: 40-200 Nm 1 pc Ball Pein Hammer Head Weight: 24 oz., Handle Length: 14 "
Torque Wrench
1 pc Cold Chisel Blade Width - 1"(25 mm), Overall Length - 10"(250 mm)
1 pc Cat Bar 16"
CAT NR. KIT/MOD/37A BOX QTY. 1 1 pc Hacksaw Frame 12" with Bi-metal Blade
22 pcs 1/2" Hex Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 1 pc Retra Knife
27, 30, 32 mm
21 pcs 1/2" Hex Sockets - Deep 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 28, 29, SERIES B - 2/3 Size
30, 32 mm
1 pc 1/2" Sliding T Handle
1 pc Professional Ratcheting Drive: 1/2", Torque Range: 40-200 Nm
42 www.groz-tools.com india@groz-tools.com 43
CAT NR. KIT/MOD/16B BOX QTY. 1 CAT NR. KIT/MOD/39B BOX QTY. 1
19 pcs Deep Offset Combination 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm 22 pcs 1/2" Hex Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26,
Spanners 27, 30, 32 mm
1 pc 1/2" Slim Line Ratchet Handle
44 www.groz-tools.com india@groz-tools.com 45
CAT NR. KIT/MOD/4C BOX QTY. 1 CAT NR. KIT/MOD/18C BOX QTY. 1
1 pc Water Pump Plier 10" (250 mm) Set of Hex Keys with Ball End - Extra 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10 mm
9 pcs Long - Metric
1 pc Self Locking Plier 10" (250 mm)
1 pc Adjustable Wrench 10"
1 pc Rust Preventive Lubricant 300 gms
Spray - GO20
1 pc Feeler Gauge 20 leaves, 150 mm
46 www.groz-tools.com india@groz-tools.com 47
CAT NR. KIT/MOD/26C BOX QTY. 1 CAT NR. KIT/MOD/31C BOX QTY. 1
4 pcs Flat Screwdrivers 3 × 75, 4 × 100, 6.5 × 100, 8 × 150 22 pcs 1/2" Hex Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26,
27, 30, 32 mm
2 pcs Phillips Screwdrivers PH2 × 100, PH3 × 150
1 pc 1/2" Slim Line Ratchet Handle
2 pcs 1/2" Extension Bars 5" & 10"
1 pc 1/2" Universal Joint
1 pc 1/2" Sliding T Bar
CAT NR. KIT/MOD/27C BOX QTY. 1 CAT NR. KIT/MOD/32C BOX QTY. 1
1 pc Side Cutting Plier 8" (200 mm) 1 pc Adjustable Wrench 10"
1 pc Long Nose Plier 8" (200 mm) 1 pc Water Pump Plier 10" (250 mm)
1 pc Combination Plier 8" (200 mm) 1 pc Tape Measure Length - 5m, Width - 19 mm
CAT NR. KIT/MOD/28C BOX QTY. 1 CAT NR. KIT/MOD/33C BOX QTY. 1
5 pcs Flat Screwdrivers 3 × 75, 4 × 100, 6.5 × 100, 6.5 × 150, 8 × 150 1 pc Ball Pein Hickory Wood Handle Length - 16"
- Round Shank Handle Hammer
4 pcs Pin Punches 1.5, 3, 4, 5 mm
3 pcs Octagonal Cold Chisels Blade Width - 6 mm, Overall Length - 100, 125, 150 mm
1 pc Double Face Plastic Mallet 25 mm
48 www.groz-tools.com india@groz-tools.com 49
TOOL STORAGE & ASSORTMENTS
28 Cantilever
Tool Box with Tools
84 pcs tool assortment in metric sizes 64 pcs tool assortment in metric sizes
for use in automotive workshops & for use in automotive workshops &
service stations service stations
Tool box manufactured from heave Tool box manufactured from heavy
gauge steel sheet gauge steel sheet
MTB/5/84/AU MTB/5/64/AU
84 Piece Mechanic's Tools Kit 64 Piece Mechanic's Tools Kit
QTY. CONTENT SIZE QTY. CONTENT SIZE QTY CONTENTS OF TRAY SIZE IMAGE
1 Set Hexagon Key Set (set of 9 pcs) With Ball End - Extra Long 1 pc Chisel Blade Width - 1"(25 mm), 19 pcs 1/2" Sockets 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 26, 27,
- Metric - Overall Length - 10" 28, 30, 32 mm
1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, (250 mm)
8.0, 10 mm 1 pc Cat Bar 16" (400 mm)
1
12 pcs Double Open End Spanner 6 × 7, 8 × 9, 10 × 11, 12 × 13, 1 pc Hacksaw frame 12" with Bi-Metal Blade
Set 14 × 15, 16 × 17, 18 × 19, 10 pcs Hexagonal Keys 1.5, 2, 2.5, 3, 4, 5, 5.5, 6,
TRAY
20 × 22, 21 × 23, 24 × 27, 17 pcs 1/2" Hex Socket 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 8, 10 mm
25 × 28, 30 × 32 19, 21, 22, 24, 27, 30, 32 mm
12 pcs Ring Spanner Set 6 × 7, 8 × 9, 10 × 11, 12 × 13, 5 pcs 1/2" Hex Socket - Deep 10, 14, 17, 19, 22 mm 1 pc Self Locking Plier 7" (175 mm)
14 × 15, 16 × 17, 18 × 19, 1 pc 1/2" Ratchet handle
20 × 22, 21 × 23, 24 × 27,
25 × 28, 30 x 32 1 pc 1/2" Sliding T Bar 1 pcs Combination Plier 8" (200 mm)
4 pcs Pin Punch Set 1.5, 2.5, 3, 4 mm 1 pc 1/2" L Handle
2
2 pcs 1/2" Universal Joint 1 pc Long Nose Plier 8" (200 mm)
2 pcs Flat Screwdriver 6.5 × 125 mm; 8 × 150 mm
TRAY
2 pcs Philips Screwdriver 1 × 80 mm; 2 × 100 mm 2 pcs 1/2" Extension Bar 5" & 10"
1 pc Side Cutting Plier 7" (175 mm)
1 pc Side Cutting Plier 7" (175 mm) 2 pcs 1/2" Spark Plug Socket 16 mm & 21 mm
2 pcs Socket Adaptors 1/2 F × 3/4 M, 1/2 F × 3/8 M 17 pcs Combination Spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22
1 pc Long Nose Plier 7" (175 mm)
mm
1 pc Combination Plier 8" (200 mm) 1 pc Feeler Gauge 20 leaves, 150 mm
1 pc Ball Pein Hammer - Wood Handle 16 oz. (453 g)
3
1 pc Circlip Plier - Bent External 6" (150 mm) 1 pc Adjustable Wrench 10" (250 mm)
TRAY
1 pc Water Pump Plier 10" (250 mm) 1 pc 1/2" Extension Bar 10" (250 mm)
1 pc Circlip Plier - Bent Internal 6" (150 mm)
1 pc Circlip Plier - Straight External 6" (150 mm) 1 pc Locking Plier 10" (250 mm) 1 pc 1/2" Sliding T-bar -
1 pc Circlip Plier - Straight Internal 6" (150 mm) 1 pc Rust Preventive Lubricant 300 gms 1 pc 1/2" Universal Joint -
Spray - GO20
1 pc Ball Pein Hammer Head weight - 24 oz., 1 pc Water Pump Plier 10" (250 mm)
Handle length - 14" 1 pc Retra Knife
1 pc 1/2" Ratchet Handle -
4
6 pcs Screwdriver FL4 × 100 mm, FL6 × 100 mm, FL8 × 150 mm, PH1 ×
75 mm, PH2 × 100 mm, PH3 × 150 mm
5
ORDERING INFORMATION
TRAY
CAT BOX
NR. QTY.
MTB/5/84/AU 1
MTB/5/64/AU 1
50 www.groz-tools.com india@groz-tools.com 51
29 5 Tray Cantilever
30 Aluminium
MTB-5
Tool Box
Tool Box
35 KG MTB-5AL
General purpose cantilever tool box
*Tools not
included
52 www.groz-tools.com
31 Aluminium
Tool Box with Tools 5
4
Comprehensive Mechanic's Tool
Kit comes in an Aluminium Tool
Box (MTB/5/AL) 3
2 pcs 1/2" Extension Bars 125 & 250 mm (5" & 10")
1 pc 1/2" Universal Joint
2
7 pc - Metric
TRAY
20 pcs 1/2" Hex Sockets 8, 9, 10, 11, 12 , 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
24, 27, 30, 32 mm
4
ORDERING INFORMATION
CAT BOX
NR. QTY.
MTB/5AL/66/AU 1
54 www.groz-tools.com
TORQUE TOOLS
32 Ratcheting TQW-RT
Torque Wrenches
High Accuracy Torque Wrench with
unmatched safety & accuracy Fixed Head
Ratchet Lever
48 teeth ratchet for an engagement
angle of 7-1/2°. Ideal for both precise
adjustment & non slip use SET MODE
Adjustment Ring
in unlocked position
Chrome-Molybdenum alloy Steel for setting Torque
Square Drive value
Cr V Body
(Mat Satin Finish)
Fully secure locking mechanism avoids
accidental/forced adjustment
Accurate to ± 4%
Lens (Screen)
Safety Button
Adjustment Ring
ORDERING INFORMATION
CAT SQUARE TORQUE FINE OVERALL NET BOX
NR. DRIVE RANGE SCALE LENGTH WT. QTY.
(INCH) (NM) (NM) (INCH) (MM) (KGS)
TQW/RT/3-8/25 3/8 5-25 0.1 12.7 323 0.765 1
TQW/RT/3-8/50 3/8 10-50 0.5 15.7 400 0.983 1
TQW/RT/1-2/100 1/2 20-100 0.5 15.7 400 0.998 1
TQW/RT/1-2/200 1/2 40-200 0.5 20.4 517 1.36 1
TQW/RT/1-2/340 1/2 60-340 1 24.4 620 1.73 1
TQW/RT/3-4/750 3/4 150-750 2.5 47.6 1210 5.85 1 SCAN TO
WATCH
TQW/RT/0-1/1000 1 200-1000 2.5 59.0 1500 7.43 1
india@groz-tools.com 55
TORQUE TOOLS
33 Digital TQW-DI
Torque Wrenches
Superior digital torque wrenches for high A. STANDARD SERIES
productivity & accuracy Resolution:
• With interchangeable head and 4 control buttons 0.1N-m/ 0.1 ft-lb/1 in-lb/1 kg-cm
Button controls for LED Pattern:
• angle setting* 4 red + 8 green
• torque setting
• unit setting
• mode setting
• data storage** CAT SQUARE TORQUE TORQUE END FITTING BOX
• data clearance NR. DRIVE RANGE ACCURACY SIZE ( HXW) QTY.
• data output (INCH) (NM) (FT-LB) (IN-LB) (KG-CM) (MM)
• online calibration
Interchangeable Head TQW/DI/3-8/135 3/8 6.8 ~ 135 5 ~ 99.5 60 ~ 1195 69 ~ 1378 9 X 12 1
Torque accuracy: ± 2% CW, ± 3% CCW 12 LED light panel located on sides of the handle
for clear visibility while working sideways
Angle accuracy: ± 2°
C. PRO+ SERIES (WITH MEMORY & ANGLE FUNCTION) Resolution:
PRO+ SERIES
Comes in a safe to store and carry blow 0.1N-m/ 0.1-lb/1 in-lb/1 kg-cm & 1°
moulded case • Most versatile single wrench for torque & angle tightening, eliminates the need to LED Pattern:
buy a separate angle wrench 2 red + 10 green
Available in 3 types • Angle tightening eliminates any friction issue thus ensuring complete safety
a. Standard Series • Store up to 9 pre-set torque values - a time saving feature in repetitive
b. Pro Series applications
c. Pro+ Series • Memory function that stores upto 50 readings
ORDERING INFORMATION
ORDERING INFORMATION
CAT SQUARE TORQUE TORQUE & END FITTING BOX
CAT SIZE DRIVE BOX NR. DRIVE RANGE ANGULAR SIZE ( HXW) QTY.
NR. FOR USE WITH QTY. ACCURACY
(MM) (INCH) (INCH) (NM) (FT-LB) (IN-LB) (KG-CM) (MM)
SPARE HEAD ONLY TQW/DI-AM/3-8/135 3/8 6.8 ~ 135 5 ~ 99.5 60 ~ 1195 69 ~ 1378 9 X 12 1
± 2% CW,
HD/TQW/9-12/3-8 9 x 12 3/8 TQW/DI-AM/3-8/135, TQW/DI-M/3-8/135, TQW/DI/3-8/135 1 TQW/DI-AM/1-2/135 1/2 6.8 ~ 135 5 ~ 99.5 60 ~ 1195 69 ~ 1378 9 X 12 1
± 3% CCW
HD/TQW/9-12/1-2 9 x 12 1/2 TQW/DI-AM/1-2/135, TQW/DI-M/1-2/135, TQW/DI/1-2/135 1 TQW/DI-AM/1-2/200 1/2 10 ~ 200 7.4 ~ 147.5 88 ~ 1770 102 ~ 2041 & 14 X 18 1
± 2˚
HD/TQW/14-18/1-2 14 x 18 1/2 TQW/DI-AM/1-2/340, TQW/DI-M/1-2/340, TQW/DI/1-2/340 1 TQW/DI-AM/1-2/340 1/2 17 ~ 340 12.5 ~ 250.7 150 ~ 3009 173 ~ 3469 14 X 18 1
SCAN TO
* Only on PRO+ Series WATCH
HD/TQW/14-18/3-4 14 x 18 3/4 TQW/DI-AM/3-4/340, TQW/DI-M/3-4/340, TQW/DI/3-4/340 1 TQW/DI-AM/3-4/340 3/4 17 ~ 340 12.5 ~ 250.7 150 ~ 3009 173 ~ 3469 14 X 18 1
** Only on PRO & PRO+ Series
56 www.groz-tools.com india@groz-tools.com 57
TORQUE TOOLS
34 Classic
35 Aluminium
TQW-CL TQW-AL
reversed by pushing the square drive to Compact design & performance Accurate ± 3%
the opposite side For easy access in
confined spaces
Scale reading made easy with four Complete with extension bar*
torque readings engraved on the steel (*only with 1" drive model) for
body added leverage
Convenient
Retracting Lever
for quick and easy
torque adjustment
ORDERING INFORMATION
Chrome Molybdenum Added Leverage
CAT SQUARE TORQUE OVERALL NET BOX
Square Drive: for higher Supplied with an aluminium tube extension for increased leverage
NR. DRIVE RANGE LENGTH WT. QTY.
strength and durability while tightening at high torque values
(INCH) (NM) (FT-LB) (INCH) (MM) (KGS)
TQW/CL/3-8/33 3/8 5-33 4-24 16-5/8 422 0.720 1
TQW/CL/3-8/68 3/8 12-68 10-50 18-23/32 476 1.05 1 ORDERING INFORMATION
TQW/CL/1-2/135 1/2 25-135 20-100 21-1/2 546 1.60 1 CAT SQ DRIVE TORQUE RANGE GRADUATION OVERALL LENGTH NET WT. BOX
TQW/CL/1-2/225 1/2 50-225 40-160 23-1/2 597 2.30 1 NR. QTY.
(INCH) (NM) (FT-LB) (INCH) (MM) (KG)
TQW/CL/1-2/330 1/2 70-330 50-250 32-1/2 825 2.60 1
TQW/AL/3-4/760 3/4 140-760 100-560 10 32-1/2 827 3.0 1
TQW/CL/3-4/800 3/4 200-800 140-600 42-1/8 1070 7.58 1
Comes packed in a blow TQW/AL/0-1/2000 1 750-2000 N/A 50 93 2370 11.7 1
TQW/CL/0-1/1000 1 200-1000 140-740 55 1400 12.80 1 moulded case *Only on 3/4". On 1" single window with reading in N-m only
58 www.groz-tools.com india@groz-tools.com 59
AUTOMOTIVE TOOLS & ACCESSORIES
36 Torque
37 Strap
TQM STW
Multipliers Wrench
Heavy duty torque multiplier provides Aluminium I-beam handle for
mechanical advantage in applying increase strength
high torque to tighten nuts & bolts
Non marring nylon belt prevents
Particularly used for high torque scratching and damage to
application finished surfaces
38 Tyre TLVR
Levers
Professional quality straight pattern
tyre levers with hook & taper end
ORDERING INFORMATION
60 www.groz-tools.com india@groz-tools.com 61
AUTOMOTIVE TOOLS & ACCESSORIES
39 Telescopic
40 Quick Change
WW-TP BPL-RT
Strength
Jaws forged from Chrome Molybdenum steel
with accurate heat treatment for enhanced
strength & wear resistance
Versatility
Easily removable jaws for setting to required
jaw configuration or internal/external setting
2 Jaw
L1 Ratcheting mechanism holds jaws in position
while setting puller
L2
Used to pull out gears, pulleys, bearing
flanges & fly wheels, shafts and housings
3 Jaw
Two dual side sockets 1/2" Square drive in the center of Convenient access in difficult to Easy switch between 2 Jaw & 3 Jaw options
17x19 mm & 19x23 mm the socket permits use of both reach areas No extra tools required.
hex sides ORDERING INFORMATION
CAT MAX. REACH SPREAD SAFE WORKING LOAD BOX
NR. QTY.
ORDERING INFORMATION (INCH) (MM) (INCH) (MM) (TON)
62 www.groz-tools.com india@groz-tools.com 63
AUTOMOTIVE TOOLS & ACCESSORIES
41 Gear
42 Hydraulic
BPL JACK-BT
3 Jaw option ensures equal load Machined and polished RAM with die cut threads
distribution to slide gears, pulleys & that reduce wear and tear Pump
flywheels off shaft without damage Convenient socket
3 JAW carrying handle
Stronger Grip
Knurled heat treated saddle head with non-slip
surface gives stronger grip
Compact 2 pc
100% factory tested lifting lever rod
Leak proof
50% safety overload factor welded
construction
Pressure release
In-built 'Load Limiting Device' valve
Unique safety feature to ensure that jack is not Load limiting
accidentally used beyond rated capacity device
Base Plate
2 JAW
64 www.groz-tools.com india@groz-tools.com 65
AUTOMOTIVE TOOLS & ACCESSORIES
Magnetised Tip
Construction Professional quality screwdrivers hexagonal grip is non-slip & does not
Heavy duty steel body for ultimate stability roll away
and rigidity Chrome Vanadium Construction
For higher torque & wear resistance Magnetised Tip
Large, swivelling saddle for convenient Accurately hardened tip ensures long
positioning. Rubber cushioning on saddle Shaft extends into the handle, ensuring lasting durability
prevents damage to vehicle lift points full transfer of force
START Black oxide finish for enhanced
Nylon wheels for easy manoeuvrability and Torque Maximiser Grip corrosion resistance
Fa st lifting
positioning design for Multi-component injection moulded
quick jumpstart
Safety to reach
'lifting point'
Universal joint release mechanism for safe Cr-V
ORDERING INFORMATION
and controlled lowering of the jack Construction
CAT TYPE SIZE SHAFT LENGTH BOX
NR. QTY.
Built-in safety valve protects against Rubber
(MM) (INCH) (MM) (INCH)
Cushion
overloading of jack @ 120% of rated capacity cushion on handle SCDR/R/FL3/75 3 1/8 75 3 10
on saddle prevents
prevents damage
SCDR/R/FL3/100 3 1/8 100 4 10
Hydraulic oil by-pass system protects ram
marring SCDR/R/FL4/100 4 5/32 100 4 10
from being over extended
SCDR/R/FL5.5/100 5.5 7/32 100 4 10 Torque
Maximiser
SCDR/R/FL5.5/150 5.5 7/32 150 6 10
Grip - Anti
SCDR/R/FL6.5/38 6.5 1/4 38 1-1/2 10 Roll Design
PH1 × 100mm
PH2 × 150mm
FL5.5 × 100mm
FL6.5 × 150mm
the standard jack
SCDR/R/PH2/38 PH2 38 1-1/2 10
Comparing the GROZ quick start hydraulic floor jack with a standard floor jack in the market SCDR/R/PH2/100 PH2 100 4 10
FL3 × 75mm
PH0 × 75mm
AT STROKE 0 AFTER 1ST STROKE AFTER 6TH STROKE
SCDR/R/PH2/150 PH2 150 6 10
SCDR/R/PH2/200 PH2 200 8 10
SCDR/R/PH3/150 PH3 150 6 10
SCDR/R/PZ1/75 PZ1 75 3 10
SCDR/R/PZ2/100 PZ2 100 4 10
SCDR/R/PZ3/150 PZ3 150 6 10
SCDR/R/T10/100 T10 100 4 10
After the 1st stroke, The GROZ Quick Start Hydraulic Floor Jack moves up 3 In 6 strokes, the GROZ Hydraulic Floor Jack reaches lifting
times more than the standard jack point whereas the standard Floor Jack is still way behind SCDR/R/T15/100 T15 100 4 10
Phillips Slotted
SCDR/R/T20/100 T20 100 4 10 screwdrivers screwdrivers
SCDR/R/T25/100 T25 100 4 10
ORDERING INFORMATION SCDR/R/6/ST
SCDR/R/T30/100 T30 100 4 10
CAT DIMENSIONS BOX
SET
NR. QTY.
(INCH) (MM) SCAN TO SCDR/R/6/ST Flat: 3x75 mm,5.5 x 100 mm, 6.5 x 150 mm; 5
WATCH
JACK/FL/3D 27× 13-1/2× 6-1/8 682×344×155 1 Phillips: PH0 x 75 mm, PH1 x 100 mm, PH2 x 150 mm;
66 www.groz-tools.com india@groz-tools.com 67
AUTOMOTIVE TOOLS & ACCESSORIES
45 7 pc Insulation
46 Hexagon
SCDR-VDE ALN
GROZ offers a wide range of hex key sets for use by mechanic’s and technicians worldwide
1000V SAFE
These are available in two material types:
ALN/HX-BL/7L/SAE/GRZ
Box Qty: 10
HEX L1 L2
7 Hex Keys with Ball End - (INCH) (INCH) (INCH)
SET INCLUDES
Long - SAE 3/32 5/8 2-1/64
TYPE SIZE SHAFT
LENGTH 1/8 45/64 2-13/64
Chamfered hex end for
(MM) (INCH) (MM) INCH 5/32 53/64 2-33/64
convenience in usage
SLOTTED 3/16 15/16 2-3/4
PH1 × 3-1/8"
PH2 × 4"
7/32" × 5"
1/8" × 4"
5/32" × 4"
1/4" × 6"
6.5 1/4 150 6 Ball end permits easy access 1/4 1-1/16 3-3/16
5.5 7/32 125 5 in tight, hard to reach spaces - 5/16 1-17/64 3-47/64
upto 30° angle in recess from the
Single-Pole
68 www.groz-tools.com india@groz-tools.com 69
HEX L1 L2
(INCH) (INCH) (INCH)
ALN/TX-TX/9L/GRZ ALN/HX-HX/10/SAE/GRZ
1/16 35/64 1-49/64
Box Qty: 10 TORX L1 L2 Box Qty: 10
5/64 19/32 1-57/64
(MM) (MM)
9 Torx Star Keys - Long 10 Hexagonal Keys - SAE 3/32 5/8 2-1/64
T10 18 86
1/8 45/64 2-13/64
T15 20 90
Compatible with standard 5/32 53/64 2-33/64
TORX fixing systems T20 20.5 94
3/16 15/16 2-3/4
T25 20.5 100
7/32 1-1/32 2-61/64
T27 21 105
1/4 1-1/16 3-3/16
T30 24 114
5/16 1-17/64 3-47/64
T40 26.5 123.5
3/8 1-11/32 4-1/4
T45 29.5 132.5
T50 32.5 151
ALN/HX-HX/25/GRZ
HEX L1 L2 HEX L1 L2
Box Qty: 10
(MM) (MM) (MM) (INCH) (INCH) (INCH)
25 Hexagonal Keys - Metric & SAE METRIC SAE
1.5 14 45 1/16 35/64 2-7/16
CHROME VANADIUM: 2 15 48 5/64 5/8 3
Hardened & tempered with corrosion resistant black oxide finish DIN 2.5 16 51 3/32 45/64 3-11/32
india@groz-tools.com 70 71 www.groz-tools.com
SPANNERS & PLIERS
47 Reversible
48 Ring
CSP-RRT RSP
DIN 838
Designed for high torque applications 5° Ring spanners have an elliptical
with outstanding performance & pattern & are cold stamped from
durability 72 Teeth with 5˚action arc: chrome vanadium (31CrV3) steel
Provide extreme high torque for
72 teeth, strong gear ratcheting ring processional users Conforms to DIN 838
with 5° arc for smooth movement
Spanners feature super drive
Ratcheting mechanism for increased broach reducing corner rounding
working speed, eliminating the need to & applying more torque
remove the spanner after each turn
Fully heat treated to 42-48 HRC for
Narrow and thin head, combined increased work life
with fine gear tooth design makes
the Ratcheting Spanner suitable for Reversible Lever: Rust proof matte finish
Makes it easy to switch
working in tight and hard to access
direction
areas Size laser etched on both ends for
easy identification
Reversible lever to change direction
Available as loose or in sets in
Reversible Lever
15° offset at ring end for easy access to metric sizes
fasteners and higher leverage
15°
72 Teeth
Chrome plated for corrosion protection Ratchet
with ultra premium finish for scratch
Higher Accessibility: Bi-Hex profile:
proof surface Offset at the ring end with 15° Grips the
angle for easier access & higher fastener better
leverage
RSS/SF/12/ST
ORDERING INFORMATION
CAT SIZE LENGTH SHANK THICKNESS WEIGHT BOX
Size
Size NR. QTY.
(MM) (INCH) (MM) (MM) (GMS)
º RSP/SF/6-7/S 6x7 6 - 7/8 175 4.4 55 10
º RSP/SF/8-9/S 8x9 7 - 9/32 185 4.5 70 10
º RSP/SF/10-11/S 10 x 11 7 - 13/16 198 5.2 90 10
º RSP/SF/12-13/S 12 x 13 8 - 7/16 215 5.4 115 10
ORDERING INFORMATION
º RSP/SF/14-15/S 14 x 15 9 228 5.6 150 10
CAT SIZE LENGTH WEIGHT BOX
NR. QTY. º RSP/SF/16-17/S 16 x 17 9 - 11/16 246 6.2 190 10
(MM) (INCH) (MM) (GMS)
Length
º RSP/SF/18-19/S 18 x 19 10 - 9/16 268 6.4 235 10
Length
Thickness
Shank
CSP/RRT/8/UG 8 5-1/2 140 40 5
º RSP/SF/20-22/S 20 x 22 11 - 1/2 292 6.9 315 5
CSP/RRT/10/UG 10 6-5/16 160 55 5
RSP/SF/21-23/S 21 x23 12 - 13/32 315 7.1 350 5
CSP/RRT/12/UG 12 6-11/16 170 80 5
RSP/SF/24-27/S 24 x 27 13 328 7.6 450 5
CSP/RRT/13/UG 13 7-3/32 180 95 5
RSP/SF/25-28/S 25 x 28 13 - 7/16 342 7.8 500 3
CSP/RRT/14/UG 14 7-1/2 190 110 5
RSP/SF/30-32/S 30 x 32 14 - 9/16 370 8.8 630 2
CSP/RRT/17/UG 17 9 225 180 5
SETS
CSP/RRT/19/UG 19 9-5/8 245 235 5
RSS/SF/12/ST 12 pc Metric Set, 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 5
SET 20 x 22, 21 x 23, 24 x 27, 25 x 28, 30 x 32 mm
CSS/RRT/7ST/UG 7 pc set: 8, 10, 12, 13, 14, 17, 19 mm 1
CSS/RRT/7ST/UG Ø Best Seller
72 www.groz-tools.com india@groz-tools.com 73
SPANNERS & PLIERS
49 Double Open
50 Insulation
DOSP CPL-CV LNP-CV
Induction Hardened
cutting edges (52-60 HRC) for
cutting soft, medium hard &
CHROME VANADIUM CHROME VANADIUM
44-48 HRC hard wires
35-50 HRC 1000V SAFE
DIN 3110 Hot forged
from
Conforms to DIN 3110 Forged Chrome Vanadium steel,
Chrome
fully hardened & tempered
Vanadium Hand Guard helps
Cold stamped from chrome vanadium Steel avoid spark-over
31 CRV3 Steel 1000V Safe or current passage
Tested in accordance with VDE from bare pliers to
Fully heat treated to 44-48 HRC for standards & insulated to 1000V the user’s hands
ORDERING INFORMATION
CAT SIZE LENGTH SHANK THICKNESS WEIG HT BOX
NR. QTY.
(MM) INCH) (MM) (MM) (GMS)
º DOSP/SF/6-7/S 6×7 5 126 2.60 25 10
ORDERING INFORMATION
º DOSP/SF/8-9/S 8×9 5 - 19/32 142 2.60 35 10
º DOSP/SF/10-11/S 10 × 11 6 - 3/16 157 3 50 10 CAT LENGTH BOX
NR. QTY.
º DOSP/SF/12-13/S 12 × 13 6 - 11/16 170 3.3 70 10 (INCH) (MM)
DOSS/SF/12/ST 12 pc Metric Set, 6 × 7, 8 × 9, 10 × 11, 12 × 13, 14 × 15, 16 × 17, 18 × 19, 20 × 22, 5 º SCP/CV/6 6 150 72
21 × 23, 24 × 27, 25 × 28, 30 × 32 mm SCP/CV/7 7 175 72
Size
Ø Best Seller Ø Best Seller SOFT MEDIUM HARD HARD
74 www.groz-tools.com india@groz-tools.com 75
SPANNERS & PLIERS
51 Circlip
53 Adjustable
CLP-CV AWR
Pliers Wrenches
Pliers
CHROME VANADIUM
35-50 HRC
NOTE
Ensure that fixed jaw leads the rotation &
Fully hardened & tempered jaws clamp Ergonomic cushion grip for movable jaws follows the fixed jaw. This way,
there will be less stress on the movable jaw
automatically on pipes & nuts convenience in use
which is not supported as ruggedly as the
fixed jaw
Serrated jaws set at 45° from the Used for turning & holding nuts & bolts,
handles. Lower jaw can be moved to gripping irregular shaped objects,
7 position by sliding along a tracking holding pipes, objects with large
section under the upper jaw. diameter etc
ORDERING INFORMATION
ORDERING INFORMATION CAT LENGTH OPENING TORQUE BOX
LENGTH NR. QTY.
CAT BOX (INCH) (MM) (INCH) (MM) (KGF-M)
NR. (INCH) (MM) QTY.
¿ AWR/CV/6 6 150 3/4 19 148 12
WPP/BJ/7/CV 7 175 10
AWR/CV/8 8 200 15/16 24 148 10
º WPP/BJ/10/CV 10 250 10
º AWR/CV/10 10 250 1 27 245 10
º WPP/BJ/12/CV 12 300 8
º AWR/CV/12 12 300 1-5/16 34 392 10
WPP/BJ/16/CV 16 400 5
Ø Best Seller Ø Best Seller ¿ New
76 www.groz-tools.com india@groz-tools.com 77
SPANNERS & PLIERS
54 Retra
55 Retractable
KNV-R6 KNV-5
Heavy duty Retractable knife for GROZ Retractable knife for fatigue
continuous, non-stop usage Quick release Thumb groove Ergonomic TPR free non-stop usage Robust Lever
button to for greater handle for comfort Aluminium
Rugged Zinc alloy body for prolonged change blades control SK2 Steel blades with triple cutting Die Cast
tool life edge makes the blades 50% body
sharper compared to regular
SK 2 steel blades are accurately blades
hardened & have superior edge
retention to handle tough cutting jobs Interlock nose secures the blade
with ease firmly making it safe in use
Blades available as spares as a pack Squeeze lever to load blade Quick release button to slide Squeeze lever again to load
of 12 out used blade new blade
Press the lever down & push Open screw to reach Quick & convenient blade Total 5 blades:
forward to load blade blade storage compartment interchange 4 blades come as spare inside the
knife, with 1 blade in use
78 www.groz-tools.com india@groz-tools.com 79
SPANNERS & PLIERS
56 Snap Off
58 Centre Punches
KNV-S CP
Retractable blade for variable depth of cut Working tip centred and ground to the
correct angle (90° included angle) for
Auto locking slider for secure hold increased efficiency in marking
ORDERING INFORMATION
CAT POINT SIZE BODY DIAMETER OVERALL LENGTH (L) BOX
ORDERING INFORMATION NR. QTY.
(INCH) (MM) (INCH) (MM) (INCH) (MM)
CAT DESCRIPTION BOX º CP/5-64 5/64 2 5/16 8 4 100 20
NR. QTY.
º CP/5-32 5/32 4 3/8 10 4 100 20
KNV/S/1 Knife 6
Slide the lever to retract In-built blade snap-off tool for blunt blades º CP/1-4 1/4 6 7/16 11 5 125 25
BLD/KNV/S/1/ST Set of 10 Spare Blades 10
the blade Ø Best Seller
57 Spring Calipers
59 Tap & Reamer
ID OD ARWR
Square
Calipers & dividers have a spring joint for Nr. 0, 5 & 6 have a forged body Size
precision settings. Adjustments are made by
opening & closing of legs via an adjusting nut L Nr. 00, 7 & 8 have die cast body
80 www.groz-tools.com india@groz-tools.com 81
HACKSAW FRAMES & BLADES
60 Super Cut
62 Handyman's
HF40 HF15
Rugged aluminum die cast handle & tubular Rectangular section of the tubular bow bow for storing spare blades
steel frame ensures perfect combination of rigidity
and balance Lightweight design makes it very useful
Blade can be tensioned to achieve 30,000 PSI, for overhead cutting or use from a
giving a super fast cutting action Aluminium die cast handle, ladder or scaffolding.
Blade can be mounted at 45° for flush cutting unbreakable in normal use provides
jobs comfortable grip and directs pressure
in the correct line of thrust for maximum
Storage space in the frame for spare blades efficiency
Comes complete with 12" (300 mm) Bi-metal
blade Blade can also be set for sawing at 90°.
Storage compartment in the tubular
Adjustable for 10" (250 mm) & 12" (300 mm) blade
Adjustable for 10"(250mm) & 12"(300mm) blade
61 Hacksaw Frame
63 2 Jaw
HF12 FH-10
4 nose pieces
50%
Strong aluminium die cast handle for Ergonomically designed longer handle
for a range of
comfort & control with PVC dip coated non-slip grip
rivets sizes:
3/32" (2.4 mm)
Easy to use blade tensioning device to Attractive powder coated finish 1/8" (3.2 mm) STRONGER
set the blade correctly 5/32" (4.0 mm)
HF/12/RB 3/16" (4.8 mm)
Includes 4 nose pieces & a nose piece
Supplied complete with 12" chrome alloy wrench
steel blade
ORDERING INFORMATION
CAT DETAILS OVERALL HEIGHT (H) DEPTH OF BOX
NR. LENGTH (L) BOW (H) QTY. Depth of Height ORDERING INFORMATION
Bow (h) (H)
(INCH) (MM) (INCH) (MM) (INCH) (MM) CAT BOX
NR. QTY.
Black frame with
HF/12/RB 17-5/16 440 5-1/8 130 4 103 10
red handle RT/FH-10 5
Overall Length (L)
82 www.groz-tools.com india@groz-tools.com 83
VICES & CLAMPS
64 G Clamps
66 Multi
GCL-13D BV-MP
General Purpose Purpose Vice
SG iron construction with a tensile
strength of over 60,000 PSI
angle and applies even pressure on
the work piece
Truly versatile multi-purpose vice,
ideal for use both by mechanic’s and Knurling on
jaw Hardened
NEW!
professionals alike to 50 ±5 HRC
Handle is designed to bend before the Textured powder coated finish with
frame is overstressed spindle in black oxide finish for SG iron movable jaw and slide
increased resistance to corrosion accurately machined for smooth and
Steel main screw has ACME threads for reliable clamping
smooth operation Useful for a variety of metal and
woodworking applications Jaws hardened 50±5 HRC for increased
Swivelling pad adopts the correct resistance to wear
D
GCL/13D/250 10 250 3.1/2 90 1000 8 assembly depending on the work in
GCL/13D/300 12 300 4 100 1135 8 hand
Ø Best Seller
Pipe Jaw can hold pipes with diameter
upto 2" (50 mm)
ORDERING INFORMATION
CAT JAW JAW THROAT NET BOX
NR. WIDTH OPENING DEPTH WT. QTY.
(INCH) (MM) (INCH) (MM) (INCH) (MM) (KGS)
ORDERING INFORMATION
EBV/F/4 4 100 4.3/4 120 3.5/32 80 6.30 4
CAT ORD JAW WIDTH JAW OPENING THROAT DEPTH NET WEIGHT BOX
º EBV/F/6 6 150 6 150 3.5/8 90 18.00 1
NR. NR. QTY.
(INCH) (MM) (INCH) (MM) (INCH) (MM) (KG) (LB)
º EBV/F/8 8 200 8 200 4.3/8 110 37.50 1
BV/MP/125 35477 5 125 5 125 2-3/4 70 15.50 34 1
Ø Best Seller
84 www.groz-tools.com india@groz-tools.com 85
PRECISION VICES
67 Mechanic's Vices /
69 Milling Machine Vices
BV MMV-SP
Smooth one finger operation 360° swivel base allows the vice to be set at
any angle along the vertical axis
Vee grooves in the sliding jaw for holding of Relief in clamp seat ensures complete
round jobs surface contact
ORDERING INFORMATION
CAT JAW WIDTH JAW OPENING JAW DEPTH BOX
NR. QTY.
(MM) (MM) (MM)
ORDERING INFORMATION
AMV/SP/100 100 100 38 1
CAT JAW WIDTH JAW OPENING JAW DEPTH BOX
AMV/SP/150 150 150 45 1
NR. QTY. horizontal
(MM) (MM) (MM)
¿ AMV/SP/200 200 200 59 1 & vertical
TMV/23 75 110 35 1 rotation
¿ New
86 www.groz-tools.com india@groz-tools.com 87
PRECISION VICES
71
3 Way Tilting Vices
73 Quick Change
TLT-SP MMV-MOD
Manufactured from close grained Manufactured from case hardened Quick Clamping
0-45°
hi-tensile seasoned cast iron with fully steel, fully hardened & tempered Lift the lever to the desired position
tilting
hardened and ground tool steel jaws; and clamp workpiece with a simple
vices have a premium polychromatic Jaws manufactured from single push
finish piece steel with a pull down angle
for precise & safe clamping. Vee Space Saving Design
High tensile grade 10.8 fasteners for A combination of groove in jaws to hold round jobs Vices can be matched side by side
strength and rigidity to these vices settings along the 3 securely with minimum set-up time
scales
Relief in clamp seat ensures complete 360° Modularity Jaw Holes for Special Applications
surface contact swivel All vice parts & accessories are 4 extra tapped holes over the
base modular and will interchange with jaws for special stack type jaw
perfect alignment application
Universal Vice
72 Sine Vices
74
SNV
The third angular slide with a moving “Hold Down” slots allow for secure
Screw Type Screwless Type axis allows for any setting in the 3D clamping of the vice on the work table
plane
ORDERING INFORMATION
CAT JAW JAW JAW CENTRE TO CENTRE BOX
NR. WIDTH OPENING DEPTH DISTANCE QTY.
(INCH) (MM) (INCH) (MM) (INCH) (MM) (INCH) (MM) SPECIFICATIONS
SCREWLESS TYPE JAW WIDTH 4" (100 mm)
ORDERING INFORMATION
SNV/6 2.3/4 3.3/4 1-9/16 6 1 JAW OPENING 4" (80 mm)
CAT BOX
SCREW TYPE NR. QTY. JAW DEPTH 1-1/4" (32 mm)
SNV/7 2.3/4 3 1-9/16 7 1 UV/SP/100 1 NET WEIGHT 13.4 kg
88 www.groz-tools.com india@groz-tools.com 89
SOCKETS & ACCESSORIES
75 Hand SKT
Sockets
Diagram
only for
reference
L L L
SOCKETS
SKT/H/1-4/5D/UG 5 50 8.0 11.9 10
SKT/H/3-8/22/UG 22 32 29.65 26 6 SKT/1-4/T30/UG T30 37 5.50 12 10
SKT/H/1-4/6D/UG 6 50 9.3 11.9 10
SKT/1-4/T40/UG T40 37 6.60 12 10
SKT/H/1-4/7D/UG 7 50 10.5 11.9 10
SKT/H/1-4/8D/UG 8 50 11.9 11.9 10 SLOTTED BIT SOCKETS
SKT/H/1-4/9D/UG 9 50 13.2 13.2 10
90 www.groz-tools.com india@groz-tools.com 91
SOCKETS & ACCESSORIES
Hand Sockets
(continued)
D1 (HEX SIDE)
L L L
L
D2 (DRIVE SIDE)
D2 (DRIVE SIDE) D2 (DRIVE SIDE) D2 (DRIVE SIDE)
ORDERING INFORMATION ORDERING INFORMATION
ORDERING INFORMATION ORDERING INFORMATION
CAT SIZE L D1 D2 BOX CAT SIZE L D1 D2 BOX
CAT SIZE L D1 D2 BOX CAT SIZE L D1 D2 BOX NR. QTY. NR. QTY.
NR. QTY. NR. QTY. (MM) (MM) (MM) (MM) (MM) (MM) (MM) (MM)
(MM) (MM) (MM) (MM) (MM) (MM) (MM) (MM)
92 www.groz-tools.com india@groz-tools.com 93
IMPACT
SOCKETS & ACCESSORIES
D1
(HEX SIDE)
D1 D2
(HEX SIDE) (DRIVE SIDE)
Recessed Corners
Chamfered L
Openings L L
Chrome
Molybdenum
Laser Etching D2 D2 D1
with output size (DRIVE SIDE) (DRIVE SIDE) (HEX SIDE)
New range of impact Pin hole in the impact ISKT/H/1-2/18 18 38 27.0 25 10 º ISKT/H/3-4/33 33 57 50.0 44 4 ISKT/H/0-1/35 35 66 55.0 54 4
sockets from GROZ are sockets facilitates º ISKT/H/1-2/19 19 38 28.0 25 10 ISKT/H/3-4/35 35 57 52.0 44 4 ISKT/H/0-1/36 36 66 56.5 54 4
designed to withstand high use with impact tools º ISKT/H/1-2/21 21 38 30.0 25 8 ISKT/H/3-4/36 36 57 53.0 44 4 ISKT/H/0-1/38 38 66 59.0 54 4
levels of torque & impact having pin and ring ISKT/H/0-1/41 41 68 62.5 54 4
ISKT/H/1-2/24 24 38 34.0 30 6 ISKT/H/3-4/38 38 57 56.0 44 4
applications retaining mechanism
ISKT/H/1-2/27 27 42 40.0 30 6 ISKT/H/3-4/41 41 58 59.0 44 4 ISKT/H/0-1/46 46 72 69.0 54 4
77 Socket
Accessories
SLIDING T BARS EXTENSION BARS UNIVERSAL JOINT ADAPTOR HEX SPARK PLUG SOCKET
Manufactured from high quality Chrome Manufactured from high quality Chrome Manufactured from For using a combination Designed for
Vanadium steel for strength & durability Vanadium steel for strength & durability Chrome Vanadium of square drive sockets insertion &
for higher strength & in one application removal of
Time & effort saving tool, provides right Corrosion resistant chrome plated finish durability spark plugs
leverage for tightening nuts & bolts easily
Used along with a socket to reach into Hinged through 180°
confined spaces in both directions,
helps the user to
'form corners' or
ORDERING INFORMATION
to get socket onto
CAT DRIVE LENGTH BOX inaccessible bolt
NR. QTY. heads
(INCH) (INCH) (MM)
DRXB/1-4/2/UG 1/4 2 50 10
ORDERING INFORMATION
DRXB/1-4/4/UG 1/4 4 100 10
CAT SIZE BOX
DRXB/1-4/6/UG 1/4 6 150 10 NR. QTY.
ORDERING INFORMATION
DRXB/3-8/3/UG 3/8 3 75 5 SADP/1-4F/3-8M/UG 1/4" (F) to 3/8" (M) 5
CAT DRIVE LENGTH BOX DRXB/3-8/6/UG 3/8 6 150 5 ORDERING INFORMATION SADP/3-8F/1-4M/UG 3/8" (F) to 1/4" (M) 5
NR. QTY. CAT DRIVE BOX
(INCH) (INCH) (MM) DRXB/1-2/5/UG 1/2 5 125 5 SADP/3-8F/1-2M/UG 3/8" (F) to 1/2" (M) 5
NR. QTY.
SLTB/1-4/UG 1/4 4-1/2 115 10 DRXB/1-2/10/UG 1/2 10 250 5 (INCH) SADP/1-2F/3-8M/UG 1/2" (F) to 3/8" (M) 5 ORDERING INFORMATION
SLTB/3-8/UG 3/8 6-1/2 165 10 DRXB/3-4/4/MT 3/4 4 100 10 UVJ/1-4/UG 1/4 10 SADP/1-2F/3-4M/UG 1/2" (F) to 3/4" (M) 5 CAT DRIVE HEX SIZE BOX
SLTB/1-2/UG 1/2 10 250 5 UVJ/3-8/UG 3/8 5 NR. QTY.
DRXB/3-4/8/MT 3/4 8 200 5 SADP/3-4F/1-2M/UG 3/4" (F) to 1/2" (M) 5 (INCH) (MM)
SLTB/3-4/MT 3/4 18 450 1 DRXB/0-1/8/MT 1 8 200 5 UVJ/1-2/UG 1/2 5 SADP/3-4F/0-1M/UG 3/4" (F) to 1" (M) 2 SKT/1-2/SP/16/UG 1/2 16 5
SLTB/0-1/MT 1 22 550 1 DRXB/0-1/16/MT 1 16 400 2 UVJ/3-4/UG 3/4 5 SADP/0-1F/3-4M/UG 1" (F) to 3/4" (M) 2 SKT/1-2/SP/21/UG 1/2 21 5
FLEX HANDLE / POWER BARS SPEEDER HANDLE L HANDLE FLEXIBLE EXTENSION SPINNER HANDLE
Bars manufactured from high quality Chrome Vanadium construction with Manufactured from Manufactured from high Manufactured from high
hardened & tempered Chrome ultra premium finish high quality Chrome quality Chrome Vanadium quality Chrome Vanadium
Vanadium steel for strength & durability Vanadium steel for steel for strength & durability steel for strength & durability
Ideal for rapid removal or insertion of strength & durability
Hinged joint head and spring-loaded fasteners, especially in repetitive work Hardened & tempered with Fit on a socket & spin it for
ball bearing joint for secure socket Hardened & tempered corrosion resistant chrome rapid installation of
retention Provides extra leverage with greater with corrosion plated finish longer bolts
strength than ratchets resistant chrome
Chrome Molybdenum Square Drive. plated finish Flexible Extension with
Replaceable on 3/4" & 1" sizes compressed spring for use in
1/4" (F) square recess allows
Spring loaded ball confined spaces
spinner to be used with a
bearing holds sockets ratchet & also works as a
DFH/1-2/15/MT securely long extension
ORDERING INFORMATION
CAT DRIVE LENGTH DRIVE BOX
NR. TYPE QTY.
(INCH) (INCH) (MM)
DFH/3-8/9/MT 3/8 9 225 Fixed 5 ORDERING INFORMATION ORDERING INFORMATION ORDERING INFORMATION ORDERING INFORMATION
DFH/1-2/15/MT 1/2 15 375 Fixed 5 CAT DRIVE BOX CAT DRIVE LENGTH BOX CAT DRIVE BOX CAT DRIVE BOX
NR. QTY. NR. QTY. NR. QTY. NR. QTY.
DFH/3-4/20/MT 3/4 20 500 Replaceable 5 (INCH) (INCH) (INCH) (MM) (INCH) (INCH)
DFH/0-1/26/MT 1 26 650 Replaceable 5 SPDH/1-2/UG 1/2 5 LDH/1-2/UG 1/2 5 125 5 FLEX/1-4/G 1/4 10 DRSH/1-4/UG 1/4 10
96 www.groz-tools.com india@groz-tools.com 97
SOCKETS & ACCESSORIES
42 27
Slotted: 4, 5.5 & 7 mm 16 & 21 mm
Philips: PH1, PH2 & PH3 2 pcs 1/2" Extension Bar:
Pozi: PZ1, PZ2 & PZ3 5" & 10" (125 & 250 mm)
PIECE PIECE
Torx: T8, T10, T15, T20, T25, T30 & T40 1 pc 1/2" Sliding T Bar
4pc Hex Keys 1 pc 1/2" Universal Joint
1 pc 1/4" Ratchet Handle 1 pc 1/2" Ratchet Handle
2 pcs 1/4" Extension Bar:
2" & 4" (50 & 100 mm)
1 pc 1/4" Universal Joint
1 pc 1/4" Sliding T Bar
1pc 1/4" Spinner Handle
1 pc 1/4" Spinner Handle
DESCRIPTION BOX QTY.
13 pcs Hex Sockets: 10
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm DESCRIPTION BOX QTY.
6 pcs Hex Bit Sockets: 22 pcs Sockets: 5
3, 4, 5, 6, 7, 8 mm 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22,
3 pcs Slotted Bit Sockets: 23, 24, 26, 27, 28, 29, 30, 32 mm
4,5.5,7 mm 2 pcs Extension Bars:
3 pcs Philips Bit Sockets: 125 & 250 mm (5" & 10")
PH1, PH2, PH3 1 pc Universal Joint
3 pcs Pozi Bit Sockets: 1 pc Sliding T Bar
PZ1, PZ2, PZ3 1 pc Ratchet Handle
7 pcs Torx Bit Sockets:
T8, T10, T15, T20, T25, T30, T40
2 pcs Extension Bars:
50 & 100 mm (2" & 4")
1 pc Spinner Handle
1 pc Flexible Extension
1 pc Universal Joint
1 pc Sliding T Bar
1pc Ratchet Handle
98 www.groz-tools.com india@groz-tools.com 99
SOCKETS & ACCESSORIES
HEX SOCKET SET HEX SOCKET SET HEX SOCKET SET BIT SOCKET SET TORX BIT SOCKET SET HEX BIT SOCKET SET
KIT/SKT/H/1-4/9LH/UG KIT/SKT/H/3-8/8L/UG KIT/SKT/H/1-2/9L/UG KIT/BIT-SKT/SPL/1-2/6/UG KIT/BIT-SKT/TX/1-2/9/UG KIT/BIT-SKT/H/1-2/8/UG
9
PIECE
8
PIECE
9
PIECE
6
PIECE
9
PIECE
8
PIECE
DESCRIPTION BOX QTY. DESCRIPTION BOX QTY. DESCRIPTION BOX QTY. DESCRIPTION BOX QTY. DESCRIPTION BOX QTY. DESCRIPTION BOX QTY.
8 pcs Hex Sockets: 5 8 pcs Sockets: 5 9 pcs Sockets: 5 Spline Bit Sockets: 5 Torx Bit Socket: 5 8 pcs Hex Bit Sockets: 5
4, 4.5, 5, 5.5, 6, 7, 8, 10 mm 6, 8, 10, 12, 13, 14, 17, 19 mm 8, 9, 10, 12, 13, 14, 17, 19, 22 mm 55mm length: M6, M8, M10 T20, T25, T27, T30, T40, T45, T50, 5, 6, 7, 8, 10, 12, 14, 17 mm
1 pc Ratchet Handle 100mm length: M8, M10, M12; T55, T60
13
PIECE
9
PIECE
11
PIECE
81 Slim Line
82 Push Through
RTD-SL RTD-PT
60 CHROME VANADIUM
30 CHROME VANADIUM
Chrome Vanadium Construction: Works with any standard 1/2" square drive socket
Forged from high quality chrome
vanadium steel, precisely hardened for Unique push-through ratchet rotates in only one
increased durability direction. To reverse, simply remove socket, push
square drive out of the other side of the head &
Unique Patented Design: re-attach socket on the other side
30% slimmer & lighter than normal pear
head ratchet, provides higher torque & Anti slip, ergonomic soft grip handle
extended service life
Square Drive available as spare. No need to
discard complete Ratchet Handle once the drive
wears out
83 Round Head
Unique Patented Design Slim Line Ratchet
Gourd shaped head is 30% narrower More than 9 Teeth Bite of Gear is
Ratchet body is 30% slimmer than RTD-RH
regular ratchet handles. This
than regular oval shaped ratchets
making these most suitable for use
designed to transfer extremely high
torque and extend the service life
reduces the weight of the ratchet
handles & provides high torque
Ratchet Handle
in tight & hard to reach areas
Normal Type Ratchet
Only 3 teeth bite, unable to transfer the
43
torque powerfully and efficiently
CHROME VANADIUM
ORDERING INFORMATION
Ratchet Handle
24 CHROME VANADIUM
2pc construction
Classic pear head design for strength,
with detachable
durability & high performance head
ORDERING INFORMATION
104 www.groz-tools.com