Professional Documents
Culture Documents
Irys
Irys
Installation guide
Cod. 97070054
Rev. 0
This document includes information about installing the iRYS software and the additional packages that are
required for its proper working.
NOTES
INDEX
INSTALLATION PROCEDURE 3
UNINSTALLING IRYS 10
WARNING
Installation procedure
Executing the iRYS software requires two more packages to be working on the workstation: the Dongle key and the
ActiveX drivers. The iRYS installation process includes the installation of such packages. Hereafter the steps to perform
during the setup procedure are shown.
During this phase, the driver for the Dongle key device is installed.
ActiveX installation.
Log Service installation 12. The Log Service components are automatically installed,
no user’s input is required.
13. The main iRYS setup returns active. You have to confirm
selecting Install to start the final installation process.
If an iRYS software release is already working on a PC, new installation will be considered as an update.
4. At the end of the copy process, you can finish the update
installation selecting Finish. It is recommended not to
modify the default setting about the workstation reboot.
The software supports the multi-license hardware key (also called NET key), which allows the use of the program with
multiple workstations simultaneously using only one hardware key on the network.
The NET key can be connected either on a workstation where iRYS software is already installed either on a network server.
If connected to a workstation where iRYS is already installed, no further operation is needed; of course be careful to never
turn off the PC to allow other workstations to access to the key.
If connected to a Server it is necessary to install the key driver: please, run install.bat placed in the software installation
package under the folder ..\DongleKey\Windows.
The number of licenses is variable depending on the model purchased. Typical values are 5, 10, 25, 50, and 250.
The number of licenses does not refer to the maximum number of allowed installations of software but indicates the
maximum number of stations that can simultaneously run the program.
(For example, in the case of a NET 5 license key you will be able to install the software on as many workstations but run
the program solely on 5 simultaneously.)
To properly use the multi-license keys (NET), you make sure that port 1947 TCP / UDP is enabled. Workstations that must
use the multi-license hardware key (NET) must be connected within the same network domain and subnet mask. Multi-
license keys cannot be used in Remote Desktop Protocol (RDP) mode. All active options on the NET key will be available to
all connected workstations.
If both a local hardware key (connected on the PC where you are running the software) that a NET key (connected for
example on the Server) are in use, priority will be given to the local key.
Uninstalling iRYS
This procedure show how to remove the files that are copied during the installation process. This will make the software
unusable. Yet, due to security reasons, all the files and folders that were created and/or modified after the installation
shall not be deleted. In order to complete the uninstallation, the iRYS working folders must be removed manually after
successfully performing the following procedure.
5. Select Remove.