Professional Documents
Culture Documents
SM2244
SATA Solid-State Drive Controller
Key Features
The SM2244 is an extremely high-performance SATA Interface
Compliant with Serial ATA Revision 2.6 specification
SATAII SSD Controller, supporting the new
1.5 Gbps/ 3.0 Gbps interface rate
generation high-speed synchronous mode NAND and Supports Native Command Queuing
delivering the world highest transfer rate among 4- Supports TRIM command based on ATA-8
channel SATA Solid-State Drives. The SSD controller Supports 48-bit Logical Block Addressing (LBA)
provides small-form factor to be more adaptive to the Supports partial and slumber mode
Flash Interface
applications for mobile consumer electronics such as
Supports ONFI 2.1/2.2 Synchronous/Asynchronous
tablet PC, Netbook, mini-SATA (MO-300A), and Half- Interface
slim SSD (MO-297). Supports Toggle Synchronous Interface
4 parallel channel flash interface
In addition to advanced features and customized 8 CE pins per channel support up to 32 flash devices
supports, the SM2244 offers longer SSD lifetime with Global Wear Leveling
lower write amplification and wear leveling factor Flash Memory Support
Supports all 2x/3x nm MLC/SLC NAND Flash
(WLF). To satisfy the requirements for industrial,
Supports 2KB, 4KB, and 8KB page size
military, and consumer storage systems, the SM2244 2-plane Interleave structure
is the best solution to the compromise between Supports External DRAM
performance, power consumption, form size, and cost DDR/DDR2/Mobile DDR
considerations. Supports 16-bit data bus width only
Supports DRAM with capacity of up to 2Gb
Applications Robust Data Protection
Enhanced hardware BCH ECC engine
SATA II Solid State Disk
Software/Hardware write protect option
Embedded Application StaticDataRefresh technology ensures data integrity
High-Speed NAND Storage Early weak block retirement option
Multiple data security zones
Package
Controller Core
LFBGA 225-ball 32-bit RISC CPU
Lead-free and RoHS Compliant Built-in 1.2V Power-On-Reset
Built-in 2.5V and 2.3V voltage detectors for power
fail protection
Automatic sleep and wake-up mechanism to save
power
Upgradeable Firmware
Supports firmware in system programming (ISP)
function for firmware upgrade
Operating Temperature
Commercial version: 0°C ~ 70°C
Industrial version: -40°C ~ 85°C
SRAM
DDR/ Power
DRAM
DDR2/ Saving
Mobile DDR
Controller ROM Control
This publication, including all photographs, illustrations and software, is protected under
international copyright laws, with all rights reserved. Neither this publication, nor any of the
material contained herein, may be reproduced without written consent of the manufacturer.
www.siliconmotion.com © Copyright 2011 Silicon Motion, Inc.