Professional Documents
Culture Documents
Uniqu
No Compromises!
The DOMINO jointing system.
Every system
has its advantages ...
Round dowels are among some of Biscuit dowels are positioned on the
the most important jointing elements scribe line, usually using handheld
used in furniture assembly. However, machines. Because biscuit dowels are
because round dowels do not allow for shorter than the routed grooves, a slight
misalignment, exact positioning is usually offset does not pose a problem when
required with bench-mounted or semi- the dowel is inserted as the joint can
stationary machines. be moved. However, this does require
additional alignment when gluing.
... but one system has them all.
More versatile: suitable both for panel More stable: the special shape and large Quicker: the first dowel hole is aligned
joins and jointing frames and racks. surface area for gluing on the DOMINO with extreme ease and routed accurate-
dowel ensure maximum stability. ly using stop pins. It secures the joined
workpieces immediately, accurately and
flush with the edge.
The DOMINO jointing system. At last a system that joins everyt
Maximum stability.
Thanks to the shape of the DOMINO
P E F C / 0 4 - 3 1 - 0 6 22
dowel, designed with expanding glue
slots and side grooves.
DOMINO dowels bear the
Pan European Forest Council
(PEFC) quality seal for wood
products originating from
sustainable, well-maintained,
responsible forest cultivation.
thing.
and quicker:
DOMINO dowel.
Panel joins.
Quick, solid joints, no alignment
required when gluing.
Frame joints.
Insertion of several DOMINO dowels
provides maximum stability for
heavily loaded frame components.
Rack joints.
Suitable for workpieces with
dimensions greater than
15 x 22 mm.
The DOMINO jointing system. More versatile, more stable, fast
Mitre routing.
Catch positions at 0°, 22.5°, 45°,
67.5° and 90° as well as infinitely
variable routing angles from 0 to 90°.
Refined technology.
High-quality, robust inner mechanism for
consistently accurate routing results.
ter.
DF 500.
1)
Source: Festool testing laboratory July 2005.
The DOMINO jointing system. At last a system that joins everyt
Fixing hole 2
thing.
system.
5 x 30
15 15
20 12
6 x 40
20
The oval DOMINO shape has a large gluing area and guarantees 15 25
maximum stability. The DOMINO is as stable as a tongue-
and-groove joint, only much quicker to manufacture and more
variable, especially in frame and rack assembly.
8 x 40
20
15 25
Load applied
25
Load path
10 x 50
Glued joint breaks Glued joint breaks Glued joint holds firm.
25
after 2.1 mm. after 2.3 mm. Load test was stopped
at 14 mm.
ation of Routing depths DOMINO assortment
uting depths
20
25
20
Always the right DOMINO dowel to hand.
25
25
10
hing.
system.
Handling Accessories
Routing as never before. Business as usual. Effective accessories that make your work easier.
The DOMINO dowel jointer makes your work easier. You do not For example, aligning narrow wooden strips perfectly in
need spend time becoming accustomed to the machine if you preparation for routing – no problem with the trim stop. The
have been previously working with a round or biscuit dowel stop allows you to centrally position and secure strip material
jointer. With an ergonomic shape and easy to use controls, with widths of 22 mm and above quickly and reliably. The stop
you can start using the DOMINO dowel jointer immediately – can also be used for mitre routing.
whether mitering or working in a horizontal or vertical position.
Trim stop.
For strip material with widths
between 22 and 70 mm.
Accessories
Cross stop.
Repeat hole spacing between
100 mm and 205 mm can be
transferred without marking
scribe lines on the workpiece.
Accessories
Support bracket.
Expands the contact surface
and makes the jointer even
more secure when resting on
edges.
Scope of delivery
11
The DOMINO jointing system. More versatile, more stable, faste
DOMINO.
The jointing system where
everything fits perfectly.
Applications Features
• Furniture manufacture • One system for all panel, frame and rack joints
• Shopfitting/Interior fitting • Patented routing principle unique to handheld machines for
• Window construction accurate work with no kickbacks
• Exhibition stand construction • Stops that are quick and easy to adjust, for accurate results
• For frame and rack joints • Rotation-proof joint with DOMINO dowels providing maximum
• For panel joins stability
• 5 dowel sizes for different material thicknesses and applications
• Efficient extraction of up to 95% of chips generated
12
er.
7 2 – 6
12 8 – 11 1
14
13
15 16 18
17
1 DF 500 Q-Plus DOMINO dowel jointer DF 500, DOMINO cutter D 5, support bracket, operating tool, 574228
SYSTAINER size 2
System accessories
Product Explanation/Dimensions Qty. in pack/Pcs Order no.
7 DOMINO DOMINO dowel assortment consisting of 5 x 30, 6 x 40, 1105 (600,190,130,100,85) 493301
assortment Systainer 8 x 40, 8 x 50, 10 x 50 mm
DOMINO cutters D 5, 6, 8, 10 mm, SYSTAINER size 2 One of each
12 Mobile dust extractor Tested as per EN 60335/IEC 355 standard with approval for dust 1 583302
CTM 22 E category M
13