Professional Documents
Culture Documents
02 00 WECSplorerUT
02 00 WECSplorerUT
Wä t ilä engine
Wärtsilä i software
ft service
i ttooll
1 © Wärtsilä
Introduction
2 © Wärtsilä
For training use only
Add User Account
3 © Wärtsilä
For training use only
Login
– Start program
• Login
g
Identification
User levels
Developer(System design, SW
design, Technical service)
Expert(Test
p ( run,, Assemblyy test
crew, Field service)
Operator(customer or basic user)
Viewer(customer)
Project selection
4 © Wärtsilä
For training use only
Login
– Login
When WECSplorerUT is
installed, there are no
projects
p j available.
5 © Wärtsilä
For training use only
Importing projects
– File/Import/System...
Project files
• Latest project files from IDM
All project files needed are
delivered in one file *.uzp
Select File/Import/System…
to import the project files.
6 © Wärtsilä
For training use only
Main window
Desktop indicator
Indicator for user level
7 © Wärtsilä
For training use only
Main functions
– Basics
Login Online
8 © Wärtsilä
For training use only
Symbols
– Basics
9 © Wärtsilä
For training use only
Symbols
– Basics
10 © Wärtsilä
For training use only
Online / Offline
– Basics
O li
Online Offline
WECSplorerUT
• Tuning, temporary • Tuning, permanent
• Trending • Programming
• Trouble shooting • Office work
11 © Wärtsilä
For training use only
Creating communication
1. System
y /Communication settings
g
Kvaser for CAN(CAN1 line)
LDU: TCP/IP
LDU IP address
12 © Wärtsilä
For training use only
Check software Module name In PC sw On engine sw
1. Software/Check is performed
automatically when going online
2. Select Software/Check...
3
3. WECSplorer compares the software
versions between the engine and
PC.
13 © Wärtsilä
For training use only
Compare symbols
1. Compare is done if the user: 2. All symbols (except read only) are
Select it from File/Compare… compared between PC and engine
Go
G Online
O
Go Offline
14 © Wärtsilä
For training use only
Online tuning
Tuning made for test purpose (changes will be lost if power off)
– Online tuning 3. Change the value
1 Cli
1. Click
k online
li b button
tt andd
check the indication in the right
lower corner
15 © Wärtsilä
For training use only
Offline tuning
Permanent changes will be made to the software on the PC
– Offline tuning 3. Change the value
16 © Wärtsilä
For training use only
Software Download 5. Select download option. Click Next.
Download software permanently to the modules
– Programming
1 Ensure that engine is not running!
1.
2. Log in to the correct project
3 Select Software/Download...
3. Software/Download
17 © Wärtsilä
For training use only
Software Download
Download software permanently to the modules 7. Check the old/new software you want to
7
load into the module. Click Close
Configuration versions
Software version
Software in PC in module
t download
to d l d
18 © Wärtsilä
For training use only
Software Download
Download software p
permanently
y to the modules
8. Downloading in progress
19 © Wärtsilä
For training use only
Software Download Error
Error during
g download software to the modules
Note! While using CAN communication you must be connected to the primary
CAN(CAN1) line to be able to write data to permanent memory of modules.
20 © Wärtsilä
For training use only
Exporting projects
2
3
21 © Wärtsilä
For training use4only
Trending
Configure trend properties
sample buffer length
– Select Trend / Create or one the preset
trend groups
Time between samples
22 © Wärtsilä
For training use only
Trending
Save as .csv
Horizontal ruler
Start / Stop / Clear screen Save Zoom functions
Hide line
Back to properties
Vertical ruler
Legend
23 © Wärtsilä
For training use only