Professional Documents
Culture Documents
CCR-2024-0172
REPORT OF EXAMINATION OF CRANE OR OTHER LIFTING APPLIANCE
Page 1 of 2
SW7 West Area, South Tower, Park Central Towers, 8735 Makati Ave., Makati City, PH
Location of Lifting Appliance
Name and Address of Owner FOKUSI CONSTRUCTION INC., UNIT 2105 & 2106, HIGH STREET SOUTH
CORPORATE PLAZA TOWER 1, 26TH ST. COR. 11TH AVE., BGC, TAGUIG CITY
Description and distinctive number of Motorized Gondola, model ZLP 630, serial #212839 with 2 motors, cradle 400 cm Long
Lifting Appliance motors/safety locks type YEJ 90L-4, sn #WRO 14405/#HM 1994 & #200146/#200147
Motive Power 440 volts, 3-phase, 60 Hz, 1.5 kW, 3.2 A eqpt. ID: GB2
Date of Construction 2020 - 04
The history should be briefly given and the
examiner should state whether he has seen
the last previous report.
January 25, 2021 (report no. CCR-2021-0268), 400 kg.
Date of last tests and test load applied
1. (a) What examination and tests were
applied ? THOROUGH VISUAL, FUNCTION AND LOAD TEST
(b) Are limiting or overwinding
protection devices satisfactory ?
SATISFACTORY
(c) Are S.W.L. clearly marked ? SATISFACTORY
(d) Type of S.W.L. indicator and is it in ---
good order ?
2. CONDITION AS FOUND (structure, ropes, drums, gear pulleys, shafts, pins, back balance, clutches, brakes, travel wheels, tracks, axles, chassis,
undercarriage foundation slewing, track rollers, limit switches, trips, end stops, chains, rope or chain attachments ratchet wheels, pawls, springs, jacks
and frames, rail clips, hooks)
AS NOTED
3. Repairs if any required and period
within which they should be executed
and any other conditions which the
person making the examination thinks None
is necessary to specify for securing
safe working.
4. Maximum SAFE WORKING LOAD
subject to repair, renewal, alteration if
any as specified in 3 above. (For jib 350 kilograms
cranes see overleaf.)
5. Other observations (continue overleaf)
I certify that on January 15, 2024 I thoroughly examined the lifting appliance described above and that this is a true report of
the result. The equipment described above was found to be in satisfactory operating condition. The lifting appliance should
be presented for thorough examination on or before July 14, 2024.
Issued To FOKUSI CONSTRUCTION INC.
Nor in cases as mentioned in the preceding paragraph, can the individual or individuals who have personally caused the loss or damage be held liable.
The equipment was inspected based on ASME A10.8 and equipment specifications. During the actual testing, the
motorized gondola was able to lift a test load of 400 kilograms and was found to be stable. The equipment was operated to
ascend and descends; then held suspended for fifteen (15) minutes. No slipping was observed. The motorized gondola was
found to be in satisfactory operating condition.
Note/Remark:
None
General Reminders:
• Conduct daily check of davit supports, wire ropes, motor-mounting and safety lifelines; keep record in logbook.
• Operators / users should be aware and knowledgeable of machine operation and safety mechanisms.
• Use rope grab or fall-arrest mechanism for each personnel safety lifeline.
• An auxiliary restraint rope may be installed on the gondola cradle/carriage as additional equipment safety line.
• When the anti-tilt device engages, a power cut-off device for the motor - if installed - will be advantageous.
• An overload warning or power shut-off device for the cradle - if installed - will be advantageous.
• Provide portable fire extinguisher during operation; ensure daily equipment check is conducted.