Professional Documents
Culture Documents
EST3 to BMS
Communications
Bridges
FSB-PC2 and FSB-PCLW
FSB-PC2 FSB-PCLW
Serial/Ethernet Bridge LonWorks Bridge
relevant device addresses. Then simply import this list into the
TX
RX
ERR
to the bridge. S3
S2
S1
S0
B3
B2
FSB-PC2
B1
B0
Serial/Ethernet
A7
A6
A5
Bridge
A4
A3
Engineering Specification
A2
A1
A0
The system shall proved an interface from the fire/life safety sys
tem to the Building Management System. The interface shall be
via < Modbus RTU> <BACnet MSTP> <Metasys N2> <BACnet
IP> <BACnet Ethernet> <Modbus TCP/IP> <LonWorks> protocol. Ethernet
The interface shall be software configurable as to which points
from the fire systems shall be provided to the BMS. The BMS
interface shall be powered from and mount within the fire panel Serial Connection Ethernet Connection
without affecting its agency listing. to other Equipment OR to other Equipment
Dimensions Protocol:
LonWorks only
FSB-PCLW S3
S2
S1
LonWorks
S0
B3
B2
Bridge
B1
B0
A7
A6
A5
er
v ice Pi
FSB-BRKT2
mounting kit
A0
A1
A2
#4 K-nut
A3
A4
A5
(2X)
A6
A7
B0
B1
B3
S0
S1
S2
S3
Mounting to an EST3 3-CAS7 Chassis
SPL
RUN
ERR
RX
TX
PWR
GND PWR
FSB-BRKT2 3-CHAS7
Rx/ PWR
Tx/ FRAME GND
Top rail
screws
FSB
Bottom rail
screws
Ordering Information
Model Description Ship Wt.
lb (kg)
FSB-PC2 EST3 to BMS Communications Bridge. 3.0
Mounts on separately ordered FSB-BRKT2. (1.36)
FSB-PCLW EST3 to BMS Communications Bridge. 3.0
Mounts on separately ordered FSB-BRKT2. (1.36)
FSB-BRKT2 Mounting bracket for FSB-PC2 or FSB-PCLW. Allows FSB series 1.0
to mount in an MFC-A cabinet or on the side of an EST3 Chass7. (0.45)
MFC-A Multifunction Fire Alarm Cabinet, red. 7.0 (3.1)
06-27-13