Professional Documents
Culture Documents
C TIMBER (Imported)
1 Sal Rs 1092.00 cft
2 Local Rs 395.20 cft
3 Rani Champ Rs 1248.00 cft
S/N PARTICULARS RATE UNIT
4 Phakasaj Rs 832.00 cft
5 Teak Rs 2600.00 cft
6 Sisom Rs 884.00 cft
7 Panisaj Rs 884.00 cft
8 Dhupi Rs 676.00 cft
9 Silver fir Rs 832.00 cft
E STOCK MATERIALS
1 Cement (AV) Grade - 53 ISSUE RATE Rs 620.00 Qtl
VAT 12.50% Rs 77.50
STORAGE CHARGE 5% Rs 31.00
Env Cess on (Cost + VAT) 1% Rs 6.98
Rs 735.48 Qtl
G EXPLOSIVES
1 Super Electronic Detonator 23.00
Env Cess 1% 0.23
VAT 12.50% Rs 2.88
STORAGE CHARGE 5% Rs 1.15
Rs 27.26 each
2 Emuldyne (Gelatin) 93.00
Env Cess 1% 0.93
VAT 12.50% Rs 11.63
STORAGE CHARGE 5% Rs 4.65
Rs 110.21 Kg
H FUEL
1 Diesel Rs 42.45 ltrs
2 K.oil Rs 24.00 ltrs
I CENTAGE CHARGES
1 Water charge @ 1.00%
2 Overheads @ 7.50%
3 Contractors profit @ 7.50%
J TAXES
1 Contract Tax @ 0.00%
2 Sales tax for Stone sand @ 0.00%
3 a VAT @ 12.50%
b VAT @ 4.00%
K MACHINERIES
Hydraulic Excavator (3D) with
1 Rs 1100.00
driver and fuel. HR
2 Hire and running charges of tipper Rs 450.00 HR
3 Tractor/Truck Rs 355.00 HR
4 Loader Rs 800.00 HR
5 D50-15A Buldozer Rs 3800.00 HR
6 Compressor Rs 350.00 HR
7 Roller Rs 480.00 HR
S/N PARTICULARS RATE UNIT
L ALUMINUM
1 Aluminum section Rs 240.00 Kgs
2 CP brass / stainless screw Rs 3.00 Each
3 Dash hold fastener Rs 38.00 Each
M CEMENT MORTAR
1 1:1 Rs 7947.23 cum
2 1:2 Rs 5255.15 cum
3 1:3 Rs 4321.42 cum
4 1:4 Rs 3365.31 cum
5 1:5 Rs 2850.47 cum
6 1:6 Rs 2409.19 cum
N CEMENT CONCRETE
1 1:2:4 [20mm Stone agg.] Rs 3972.52 cum
2 1:3:6 [20mm] Rs 3294.80 cum
3 1:4:8 [40mm] Rs 2704.06 cum
O CONSTRUCTION MATERIALS
1 Bricks (Grade - I) Rs 7.50 Each
2 Binding wire Rs 70.00 Kg
3 Binding Materials Rs 115.00 cum
4 Rivets 16mm dia 50mm long Rs cister Nos
5 Hooks Rs 12.00 Nos
6 Limpet washer Rs 75.00 Per 100
7 Bitumen washer Rs 15.00 Per 100
10
8 Roof Screw/ Nut & Bolts Rs 60.00
Nos
9 Steel Rs 47.25 Kgs
10 Aluminum sheet Rs 350.00 Kg
11 Rolling shutter (24 guage) Rs 140.00 sft
12 Steel channel Rs 48.00 Kgs
13 Recorn-3S (6 mm to 12 mm) Rs 45.00 125gm
10 M S HINGES
150x31x4mm Hinges Rs 48.00 Each
125x31x4mm Rs 40.00 Each
100x31x3mm Rs 32.00 Each
Screw Rs 0.80 Each
11 BRASS HINGES
150x31x4mm Hinges Rs 140.00 Each
125x31x4mm Rs 132.00 Each
100x31x3mm Rs 121.00 Each
Screw Rs 1.50 Each
Praliament hinges(150 x 110 MM) Rs 40.00 Each
Screw for Praliament hinges Rs 1.50 Each
Brass CP Praliament hinges(150 x
Rs 215.00 Each
110 MM)
S PRIMERS
1 Primer ( Wood ) Rs 157.00 lit
2 Red oxide Zinc Chromate primer Rs 132.00 lit
3 Primer ( Metal ) Red oxide Rs 123.00 lit
4 Cement primer (Solvent Base) Rs 161.00 lit
5 Cement primer ( Water base) Rs 101.00 lit
T PAINTINGS
1 Synthetic Enamel (High gloss) Rs 207.00 lit
2 Plastic emulsion paints Rs 239.00 lit
3 Synthetic distemper Rs 85.00 Kg
4 Acrylic distemper Rs 76.00 Kg
5 Exterior Emulsion paints Rs 249.00 lit
6 Cement paint (Snoeceam) Rs 48.00 Kg
9 Aluminum Paints ( Al ) Rs 190.00 lit
12 Thinners 800 Rs 164.00 lit
13 Thinners Rs 168.00 lit
14 Red / Green corrugal Rs 166.00 lit
15 Red oxide Rs 45.00 Kg
16 Bitumen Paints Rs 135.00 lit
U POLISHING ITEMS
1 Wood filler glue/Melamine sealer Rs 260.00 lit
2 Synthetic clear varnish Rs 190.00 lit
3 Gopal varnish Rs 190.00 lit
4 Varnishes & Black Rs 125.00 lit
5 Touch wood (GR - 0) Clear matt Rs 280.00 lit
6 Shellac Rs 650.00 Kg
7 Spirit Rs 75.00 lit
8 Wax Polish Rs 312.00 Kg
Z KITCHEN SINK
S100/15
1 610x450x25mm(steel) Rs 4037.00 Each
0
S/N PARTICULARS RATE UNIT
S100/15
2 610x450x20mm(precast) Rs 4037.00 Each
1
AA FLUSHING CISTERN
1 10 liter automatic flushing cistern. Rs 1084.00 Each
2 Flushing cistern with fittings. Rs 674.00 Each
3 5 liter automatic flushing cistern. Rs 674.00 Each
Dual flushing cistern with fittings6/3
2 Rs 948.00 Each
ltrs Special.
29 Equal Junction
75 MM Rs 180.00 Each
110 MM Rs 367.00 Each
160 MM Rs 955.00 Each
30 Offset
75 MM Rs 227.00 Each
110 MM Rs 442.00 Each
160 MM Rs 645.00 Each
labour deptt. RATE(1st april -
2013)
UNIT
Rs 200.00 day
Rs 300.00 day
Rs 275.00 day
Rs 250.00 day
Rs 300.00 day
Rs 300.00 day
Rs 275.00 day
Rs 250.00 day
Rs 300.00 day
Rs 275.00 day
Rs 300.00 day
Rs 275.00 day
Rs 300.00 day
Rs 275.00 day
Rs 250.00 day
Rs 250.00 day
Rs 275.00 day
Rs 275.00 day
labour deptt. RATE(1st april -
2013)
310
367.7375 336.74
310
ANALYSIS OF SCHEDULE OF RATES FOR THE YEAR - 2012
DETAILS OF ANALYSIS FOR OTHER WORKS
© 21mm to 25mm.
Rate for cum Rs. 750.00
Page 21
Clearing grass and removal of the rubbish upto a
2.2 distance of 50 m outside the periphery of the area
cleared.
Details of cost for 100 sqm.
Labour:
Beldars Day 0.60 200.00 120.00
Coolies Day 0.25 200.00 50.00
TOTAL 170.00
Water Charges and sundries 1.00% 1.70
Overheads 7.50% 12.75
Contractor's profit. 7.50% 12.75
Total 197.20
Contract Tax 0% 0.00
Total for 100.00 sqm 197.20
FOR 1 sqm 1.00 sqm 1.97
Page 22
Total for 260.00 cum 14214.64
FOR 1 cum 1.00 cum 54.67
Page 23
3.2 Excavation in Hill Area in Soil by Manual Means
Page 24
FOR 1 cum 1.00 cum 152.96
Page 25
Excavation in Hilly Areas in Hard Rock Requiring
3.5
Blasting
Excavation in hilly areas in hard rock requiring
blasting, by mechanical means including trimming of
a)
slopes and stacking of cut material with all lifts and
lead upto 50 metres.
Unit = cum
Taking output = 170 cum
a) Labour
Mate day 0.49 300.00 147.00
Mazdoor day 10.00 200.00 2000.00
Driller day 2.00 275.00 550.00
Blaster day 0.25 300.00 75.00
b) Machinery
Dozer 80 HP (D-80 A 12)@ 28.32 cum per hour hour 6.00 3800.00 22800.00
Air compressor 250 cfm with two jack hammer @ 20
hour 5.00 350.00 1750.00
cum per hour
c) Materials
Emuldyne (Gelatin) kg 35.00 110.21 3857.18
Super Electronic Detonator each 140.00 27.26 3815.70
TOTAL 34994.88
Water Charges and sundries 1.00% 349.95
Overheads 7.50% 2624.62
Contractor's profit. 7.50% 2624.62
Total 40594.06
Contract Tax 0% 0.00
Total for 170.00 cum 40594.06
FOR 1 cum 1.00 cum 238.79
Page 26
c) Materials
Emuldyne (Gelatin) kg 35.00 110.21 3857.18
Super Electronic Detonator each 140.00 27.26 3815.70
TOTAL 35662.24
Water Charges and sundries 1.00% 356.62
Overheads 7.50% 2674.67
Contractor's profit. 7.50% 2674.67
Total 41368.20
Contract Tax 0% 0.00
Total for 170.00 cum 41368.20
FOR 1 cum 1.00 cum 243.34
Page 27
Excavation work by mechanical means (Hydraulic
Excavator)/ manual means in foundation trenches or
drains not exceeding 1.5 m in width or 10 sqm on plan
4.2 including dressing of sides and ramming of bottoms lift
upto 1.5 m, including getting out the excavated soil
and disposal of surplus excavated soils as directed,
within a lead of 50m.
Ordinary rock
“Details of cost for 10 cum.
MACHINERY
Hydraulic Excavator (3D) with driver and fuel. Day 0.06 8800.00 550.00
Hire and running charges of tipper Day 0.06 2840.00 177.50
Labour-
Excavators Day 0.89 300.00 265.50
Breakers Day 1.77 200.00 353.00
Hole driller Day 0.53 200.00 106.00
Beldars Day 1.42 200.00 283.00
Coolies Day 2.41 200.00 482.00
TOTAL 2217.00
Water Charges and sundries 1.00% 22.17
Overheads 7.50% 166.28
Contractor's profit. 7.50% 166.28
Total 2571.73
Contract Tax 0% 0.00
Total for 10.00 cum 2571.73
FOR 1 cum 1.00 cum 257.17
Page 28
Excavation work by mechanical means (Hydraulic
Excavator)/ manual means in foundation trenches or
drains not exceeding 1.5 m in width or 10 sqm on plan
4.4 including dressing of sides and ramming of bottoms lift
upto 1.5 m, including getting out the excavated soil
and disposal of surplus excavated soils as directed,
within a lead of 50m.
Hard rock (blasting prohibited)
Details of cost for 10 cum.
MACHINERY
Hydraulic Excavator (3D) with driver and fuel. Day 0.13 8800.00 1100.00
Hire and running charges of tipper Day 0.13 2840.00 355.00
Excavators Day 2.65 0.00 0.00
Breakers Day 6.18 300.00 1852.50
Chisellers Day 1.06 200.00 212.00
Black smith II class Day 0.18 200.00 35.00
Beldars Day 1.50 200.00 300.00
Coolies Day 2.94 200.00 588.00
TOTAL 4442.50
Water Charges and sundries 1.00% 44.43
Overheads 7.50% 333.19
Contractor's profit. 7.50% 333.19
Total 5153.30
Contract Tax 0% 0.00
Total for 10.00 cum 5153.30
FOR 1 cum 1.00 cum 515.33
4.5 Extra for every additional lift of 1.5 m or part thereof in.
All kinds of soil.
Details of cost of 10 cum.
Labour:-
Mate Day 0.10 300.00 30.00
Beldars Day 1.10 200.00 220.00
TOTAL 250.00
Water Charges and sundries 1.00% 2.50
Overheads 7.50% 18.75
Contractor's profit. 7.50% 18.75
Total 290.00
Contract Tax 0% 0.00
Total for 10.00 cum 290.00
FOR 1 cum 1.00 cum 29.00
4.6 Extra for every additional lift of 1.5 m or part thereof in.
Ordinary or hard rock.
Details of cost of 10 cum.
Labour:-
Mate Day 0.20 300.00 60.00
Beldars Day 1.95 200.00 390.00
TOTAL 450.00
Water Charges and sundries 1.00% 4.50
Overheads 7.50% 33.75
Contractor's profit. 7.50% 33.75
Total 522.00
Contract Tax 0% 0.00
Total for 10.00 cum 522.00
FOR 1 cum 1.00 cum 52.20
Page 29
5 FILLING WORKS
Filling inside plinth in 20cm layers, consolidated to
5.1
15cm i/c watering, ramming etc all complete.
Details for 10cum.
Soil cum 10.00 50.00 500.00
Mason -III each. 0.20 250.00 50.00
O/L each. 2.50 200.00 500.00
Waterman each. 0.20 200.00 40.00
A 1090.00
Water Charges and sundries 1.00% 10.90
Overheads 7.50% 81.75
Contractor's profit. 7.50% 81.75
B 1264.40
Contract Tax 0% on B 0.00
For 10 cum 1264.40
Rate for 1 cum Rs. 126.44
Filling with available excavated earth in trenches,
plinth side of foundation, in layers not exceeding 20cm
5.2
in depth i/c consolidation of each layer by ramming,
watering etc all complete.
Labours. Mason III. each. 0.20 250.00 50.00
Other labour. each. 2.50 200.00 500.00
Waterman. each. 0.20 200.00 40.00
A 590.00
Water Charges and sundries 1.00% 5.90
Overheads 7.50% 44.25
Contractor's profit. 7.50% 44.25
B 684.40
Contract Tax 0% on B 0.00
For 10 cum 684.40
Rate for 1 cum Rs. 68.44
Page 30
B 3596.00
Contract Tax 0% on B 0.00
For 10 cum 3596.00
Rate for 1 cum Rs. 359.60
Page 31
Cement mortar 1:2 (1cement,2sand).
6.2
Analysis for 1 cum
Cement required is 47.5%=0.475cum=0.684 t
Cement. Qtls 6.84 735.48 5030.65
Sand. cum 0.07 350.00 24.50
Labour. Baidar each 0.50 300.00 150.00
Waterman. each 0.25 200.00 50.00
A 5255.15
Water Charges and sundries 1.00% 52.55
Overheads 7.50% 394.14
Contractor's profit. 8% 394.14
B 6095.98
Contract Tax 0% on B 0.00
For 1 cum 6095.98
Page 32
Contractor's profit. 8% 213.79
B 3306.55
Contract Tax 0% on B 0.00
For 1 cum 3306.55
Page 33
7 CEMENT CONCRETE: (cast in situ)
Providing & Laying in position cement concrete of
7.1 specified grade including compacting curing etc all
complete. Analysis for 1 cum
1:1:2 (1cement, 1course sand,2coarse
a)
aggregate)
Materials: Cement. qtl 6.10 735.48 4486.40
Stone aggregate 20mm cum 0.64 900.00 576.00
Stone aggregate 10mm cum 0.21 1100.00 231.00
Course sand. cum 0.43 350.00 148.75
Labour. Masson - I each. 0.10 300.00 30.00
Masson II each 1.63 275.00 448.25
Waterman. each. 0.70 200.00 140.00
A 6060.40
Water Charges and sundries 1.00% 60.60
Overheads 7.50% 454.53
Contractor's profit. 8% 454.53
B 7030.06
Contract Tax 0% on B 0.00
For 1 cum 7030.06
b) 1:1.5:3 mix.
Materials: Cement. Qtl 4.00 735.48 2941.90
Stone aggregate 20mm cum. 0.57 900.00 513.00
Stone aggregate 10mm cum. 0.28 1100.00 308.00
Course sand. cum. 0.85 350.00 297.50
Labour. Masson - I each. 0.10 300.00 30.00
Masson II each 1.63 275.00 448.25
Waterman. each. 0.70 200.00 140.00
A 4678.65
Water Charges and sundries 1.00% 46.79
Overheads 7.50% 350.90
Contractor's profit. 8% 350.90
B 5427.24
Contract Tax 0% on B 0.00
For 1 cum 5427.24
Page 34
Sand. cum. 0.45 350.00 155.75
Labour. Masson - I each. 0.10 300.00 30.00
Masson II each 1.63 275.00 448.25
Waterman. each. 0.70 200.00 140.00
A 3810.52
Water Charges and sundries 1.00% 38.11
Overheads 7.50% 285.79
Contractor's profit. 8% 285.79
B 4420.20
Contract Tax 0% on B 0.00
For 1 cum 4420.20
Page 35
Contract Tax 0% on B 0.00
For 1 cum 3136.71
b) 1:1.5:3 mix.
Materials: Cement. Qtl 4.00 735.48 2941.90
Stone aggregate 20mm cum. 0.57 900.00 513.00
Stone aggregate 10mm cum. 0.28 1100.00 308.00
Course sand. cum. 0.85 350.00 297.50
Recron 3S 125gm 1000.00 45.00 360.00
Labour. Masson - I each. 0.10 300.00 30.00
Masson II each 1.63 275.00 448.25
Waterman. each. 0.70 200.00 140.00
A 5038.65
Water Charges and sundries 1.00% 50.39
Overheads 7.50% 377.90
Contractor's profit. 8% 377.90
B 5844.84
Contract Tax 0% on B 0.00
For 1 cum 5844.84
Page 36
Materials: Cement. q 3.20 735.48 2353.52
Stone aggregate 20mm cum. 0.67 900.00 603.00
Stone aggregate 10mm cum. 0.22 1100.00 242.00
Sand. cum. 0.45 350.00 155.75
Recron 3S 125gm 800.00 45.00 288.00
Labour. Masson - I each. 0.10 300.00 30.00
Masson II each 1.63 275.00 448.25
Waterman. each. 0.70 200.00 140.00
A 4260.52
Water Charges and sundries 1.00% 42.61
Overheads 7.50% 319.54
Contractor's profit. 8% 319.54
B 4942.20
Contract Tax 0% on B 0.00
For 1 cum 4942.20
Page 37
Labour. Masson - I each. 0.10 300.00 30.00
Masson II each 1.63 275.00 448.25
Waterman. each. 0.70 200.00 140.00
A 3269.80
Water Charges and sundries 1.00% 32.70
Overheads 7.50% 245.24
Contractor's profit. 8% 245.24
B 3792.97
Contract Tax 0% on B 0.00
For 1 cum 3792.97
Page 38
Contract Tax 0% on B 0.00
For 10 sqm 2243.69
Rate per sqm Rs. 224.37
Page 39
Providing and laying damp proof course 40 mm thick
with cement concrete 1:2:4 ( 1 cement, 2 Clean
course sand, 4 graded stone aggregate 12.5 mm
7.4
nominal size) with Recron 3S of specied fiber length
(125 gm/bag of cement) including curring etc all
complete:
Details of cost of damp proof course 10.00 sqm
Cement concrete = 10 x 0.040=0.40 cum cum 0.40 4260.52 1704.21
Recron 3S gm 192.00 45.00 69.12
Labour. Masson - I each. 0.40 300.00 120.00
Masson II each 0.40 275.00 110.00
A 2003.33
Water Charges and sundries 1.00% 20.03
Overheads 7.50% 150.25
Contractor's profit. 8% 150.25
B 2323.86
Contract Tax 0% on B 0.00
For 10 sqm 2323.86
For 1 cum 232.39
Page 40
1:2:4 (1cement,2coarse sand,4 graded stone
c)
aggregate of 20mm nominal size).
Materials: Cement. qtl. 3.20 735.48 2353.52
Stone aggregate 20mm cum. 0.67 900.00 603.00
Stone aggregate 12mm cum. 0.22 1100.00 242.00
Coarse sand. cum. 0.45 350.00 155.75
Labour Masson - I each 0.17 300.00 51.00
Masson II each 2.00 275.00 550.00
Waterman. each 0.90 250.00 225.00
A 4180.27
Water Charges and sundries 1.00% 41.80
Overheads 7.50% 313.52
Contractor's profit. 8% 313.52
B 4849.11
Contract Tax 0% on B 0.00
Rate per cum 4849.11
Page 41
Materials: Cement. qtl. 3.20 735.48 2353.52
Stone aggregate 20mm cum. 0.67 900.00 603.00
Stone aggregate 12mm cum. 0.22 1100.00 242.00
Coarse sand. cum. 0.45 350.00 155.75
Recron 3S gm 800.00 45.00 288.00
Labour Masson - I each 0.17 300.00 51.00
Masson II each 2.00 275.00 550.00
Waterman. each 0.90 250.00 225.00
A 4468.27
Water Charges and sundries 1.00% 44.68
Overheads 7.50% 335.12
Contractor's profit. 8% 335.12
B 5183.19
Contract Tax 0% on B 0.00
Rate per cum 5183.19
b) 1:4 mix. Materials: 1:4 cement mortar cum. 0.14 3365.31 484.60
Labour: Mason II. each 0.67 275.00 184.25
Ordinary labour. each 0.75 200.00 150.00
Waterman. each 0.92 200.00 184.00
A 1002.85
Water Charges and sundries 1.00% 10.03
Overheads 7.50% 75.21
Contractor's profit. 8% 75.21
B 1163.30
Contract Tax 0% on B 0.00
Rate per 10 sqm 1163.30
Rate per 1 sqm Rs. 116.33
c) 1:5 Mix Materials: 1:5 cement mortar. cum. 0.14 2850.47 410.47
Labour: Mason II. each 0.67 275.00 184.25
Ordinary labour. each 0.75 200.00 150.00
Waterman. each 0.92 200.00 184.00
A 928.72
Water Charges and sundries 1.00% 9.29
Overheads 7.50% 69.65
Contractor's profit. 8% 69.65
B 1077.31
Contract Tax 0% on B 0.00
Rate per 10 sqm 1077.31
Rate per 1 sqm Rs. 107.73
d) 1:6 Mix. Materials: 1:6 cement mortar. cum. 0.14 2409.19 346.92
Page 42
Labour: Mason II. each 0.67 275.00 184.25
Ordinary labour. each 0.75 200.00 150.00
Waterman. each 0.92 200.00 184.00
A 865.17
Water Charges and sundries 1.00% 8.65
Overheads 7.50% 64.89
Contractor's profit. 8% 64.89
B 1003.60
Contract Tax 0% on B 0.00
Rate per 10 sqm 1003.60
Rate per 1 sqm Rs. 100.36
b) 1:4 Mix. Materials: Cement mortar 1:4. cum. 0.17 3365.31 578.83
Labour. Mason II. each 0.80 275.00 220.00
Other labour. each 0.88 200.00 176.00
Waterman. each 0.99 200.00 198.00
A 1172.83
Water Charges and sundries 1.00% 11.73
Overheads 7.50% 87.96
Contractor's profit. 8% 87.96
B 1360.48
Contract Tax 0% on B 0.00
Rate per 10 sqm 1360.48
Rate per 1 sqm Rs. 136.05
Page 43
Waterman. each 0.99 200.00 198.00
A 1008.38
Water Charges and sundries 1.00% 10.08
Overheads 7.50% 75.63
Contractor's profit. 8% 75.63
B 1169.72
Contract Tax 0% on B 0.00
Rate per 10 sqm 1169.72
Rate per 1 sqm Rs. 116.97
b) 1:4 Mix. Cement mortar of the specified mix. cum 0.22 3365.31 753.83
Labour. Mason II. each 0.94 275.00 258.50
Other labour. each 1.02 200.00 204.00
Waterman. each 1.10 200.00 220.00
A 1436.33
Water Charges and sundries 1.00% 14.36
Overheads 7.50% 107.72
Contractor's profit. 8% 107.72
B 1666.14
Contract Tax 0% on B 0.00
Rate per 10 sqm 1666.14
Rate per 1 sqm Rs. 166.61
c) 1:5 Mix. Cement mortar of the specified mix. cum 0.22 2850.47 638.51
Labour. Mason II. each 0.94 275.00 258.50
Other labour. each 1.02 200.00 204.00
Waterman. each 1.10 200.00 220.00
A 1321.01
Water Charges and sundries 1.00% 13.21
Overheads 7.50% 99.08
Contractor's profit. 8% 99.08
B 1532.38
Contract Tax 0% on B 0.00
Rate per 10 sqm 1532.38
Rate per 1 sqm Rs. 153.24
d) 1:6 Mix. Cement mortar of the specified mix. cum 0.22 2409.19 539.66
Labour. Mason II. each 0.94 275.00 258.50
Other labour. each 1.02 200.00 204.00
Waterman. each 1.10 200.00 220.00
A 1222.16
Water Charges and sundries 1.00% 12.22
Overheads 7.50% 91.66
Contractor's profit. 8% 91.66
Page 44
B 1417.70
Contract Tax 0% on B 0.00
Rate per 10 sqm 1417.70
Rate per 1 sqm Rs. 141.77
b) 1:4 mix. Materials: 1:4 cement mortar cum. 0.14 3365.31 484.60
Recorn 3S gm 109.44 0.40 43.78
Labour: Mason II. each 0.67 275.00 184.25
Other labour. each 0.75 200.00 150.00
Waterman. each 0.92 200.00 184.00
A 1046.63
Water Charges and sundries 1.00% 10.47
Overheads 7.50% 78.50
Contractor's profit. 8% 78.50
B 1214.09
Contract Tax 0% on B 0.00
Rate per 10 sqm 1214.09
Rate per 1 sqm Rs. 121.41
c) 1:5 Mix Materials: 1:5 cement mortar. cum. 0.14 2850.47 410.47
Recorn 3S gm 90.00 0.40 36.00
Labour: Mason II. each 0.67 275.00 184.25
Other labour. each 0.75 200.00 150.00
Waterman. each 0.92 200.00 184.00
A 964.72
Water Charges and sundries 1.00% 9.65
Overheads 7.50% 72.35
Contractor's profit. 8% 72.35
B 1119.07
Contract Tax 0% on B 0.00
Rate per 10 sqm 1119.07
Rate per 1 sqm Rs. 111.91
d) 1:6 Mix. Materials: 1:6 cement mortar. cum. 0.14 2409.19 346.92
Recorn 3S gm 72.00 0.40 28.80
Labour: Mason II. each 0.67 275.00 184.25
Other labour. each 0.75 200.00 150.00
Waterman. each 0.92 200.00 184.00
A 893.97
Water Charges and sundries 1.00% 8.94
Overheads 7.50% 67.05
Page 45
Contractor's profit. 8% 67.05
B 1037.01
Contract Tax 0% on B 0.00
Rate per 10 sqm 1037.01
Rate per 1 sqm Rs. 103.70
b) 1:4 Mix. Materials: Cement mortar 1:4. cum. 0.17 3365.31 578.83
Recorn 3S gm 130.72 0.40 52.29
Labour. Mason II. each 0.80 275.00 220.00
Other labour. each 0.88 200.00 176.00
Waterman. each 0.99 200.00 198.00
A 1225.12
Water Charges and sundries 1.00% 12.25
Overheads 7.50% 91.88
Contractor's profit. 8% 91.88
B 1421.14
Contract Tax 0% on B 0.00
Rate per 10 sqm 1421.14
Rate per 1 sqm Rs. 142.11
Page 46
Waterman. each 0.99 200.00 198.00
A 1042.78
Water Charges and sundries 1.00% 10.43
Overheads 7.50% 78.21
Contractor's profit. 8% 78.21
B 1209.63
Contract Tax 0% on B 0.00
Rate per 10 sqm 1209.63
Rate per 1 sqm Rs. 120.96
b) 1:4 Mix. Cement mortar of the specified mix. cum 0.22 3365.31 753.83
Recorn 3S gm 170.24 0.40 68.10
Labour. Mason II. each 0.94 275.00 258.50
Other labour. each 1.02 200.00 204.00
Waterman. each 1.10 200.00 220.00
A 1504.43
Water Charges and sundries 1.00% 15.04
Overheads 7.50% 112.83
Contractor's profit. 8% 112.83
B 1745.14
Contract Tax 0% on B 0.00
Rate per 10 sqm 1745.14
Rate per 1 sqm Rs. 174.51
c) 1:5 Mix. Cement mortar of the specified mix. cum 0.22 2850.47 638.51
Recorn 3S gm 138.88 0.40 55.55
Labour. Mason II. each 0.94 275.00 258.50
Other labour. each 1.02 200.00 204.00
Waterman. each 1.10 200.00 220.00
A 1376.56
Water Charges and sundries 1.00% 13.77
Overheads 7.50% 103.24
Contractor's profit. 8% 103.24
B 1596.81
Contract Tax 0% on B 0.00
Rate per 10 sqm 1596.81
Rate per 1 sqm Rs. 159.68
d) 1:6 Mix. Cement mortar of the specified mix. cum 0.22 2409.19 539.66
Recorn 3S gm 112.00 0.40 44.80
Page 47
Labour. Mason II. each 0.94 275.00 258.50
Other labour. each 1.02 200.00 204.00
Waterman. each 1.10 200.00 220.00
A 1266.96
Water Charges and sundries 1.00% 12.67
Overheads 7.50% 95.02
Contractor's profit. 8% 95.02
B 1469.67
Contract Tax 0% on B 0.00
Rate per 10 sqm 1469.67
Rate per 1 sqm Rs. 146.97
Page 48
Rate per sqm 1209.83
9.9 FINISHING
Providing and laying plaster of paris putty of 2mm thick
a) over lastered surface to prepare the surface even and
smooth all complete:
Datails of cost of 10 sqm
Plaster of paris Kg 23.00 12.00 276.00
Masson I each 0.91 300.00 273.00
Masson III each 0.91 250.00 227.50
A 776.50
Water Charges and sundries 1.00% 7.77
Overheads 7.5% on 776.50 58.24
Contractors profit 7.50% on 776.50 58.24
B 900.75
Contract Tax 0.00% on B 0.00
Total for 10 sqm Rs. 900.75
Rate per 1 sqm Rs. 90.08
Page 49
Rate per 1 cum Rs 5399.93
Page 50
Water Charges and sundries 1.00% 22.11
Overheads 7.50% on 2210.80 165.81
Contractor Profit 7.50% on 2210.80 165.81
Cost of 100 Nos. Hollow blocks Rs 2564.53
Details for 10m2 Blocks i/c wastage. 100Nos 2.90 2231.20 6470.49
Cost of laying solid blocks in 1:4 CM cum 0.28 3365.31 942.29
Labour: Mason I each 0.10 300.00 30.00
Mason II each 0.50 275.00 137.50
Masson III Each 1.25 250.00 312.50
Ordinary Labour each 1.25 200.00 250.00
Waterman each 0.05 200.00 10.00
A 8152.78
Water Charges and sundries 1.00% 81.53
Overheads 7.50% on 8152.78 611.46
Contractors profit 7.50% on 8152.78 611.46
9457.23
Contract Tax 0.00% on C 0.00
Total for 10 sqm Rs. 9457.23
Rate per 1 sqm Rs. 945.72
Page 51
Providing and laying first class brick work in half brick
thick in superstructure of standard size bricks with 1:4
10.7 cement mortar (1 cement and 4 course sand) mixed
with Recron 3S of fiber length 4.8 mm ( 100 gm/bag of
cement) including carriage of bricks.
Details of cost for 10 Sqm.
Cement mortar 1:4
For 10sqm of brick work C.M required cum 0.28 3365.31 942.29
Recron 3S gm 212.80 0.40 85.12
Bricks i/c wastage. nos 540.00 7.50 4050.00
Labour. Mason II each 0.90 275.00 247.50
Mason III each 0.60 250.00 150.00
O/L. each 0.40 200.00 80.00
Water man. each 0.20 200.00 40.00
Total A 5594.91
Water Charges and sundries 1.00% 55.95
Overheads 7.50% on 5594.91 419.62
Contractors profit 7.50% on 5594.91 419.62
C 6490.10
Contract Tax 0.00% on C 0.00
Total for 10 sqm Rs. 6490.10
Rate per 1 sqm Rs. 649.01
Providing and laying first class brick work in one brick
thick in superstructure of standard size bricks with 1:5
cement mortar (1cement and 5 clean coarse sand)
10.8
mixed with Recron 3S of fiber length 4.8 mm ( 100
gm/bag of cement) as per the direction of the engineer
in charge.
Analysis for one cum of brick work
Cost of c.m. 1:5. cum 0.25 2850.47 712.62
Recron 3S gm 155.00 0.40 62.00
Bricks i/c wastage. no 500.00 7.50 3750.00
Labour. Mason II each 0.30 275.00 82.50
Masson III each 0.20 250.00 50.00
O/L. each 0.20 200.00 40.00
Waterman. each 0.10 200.00 20.00
Total A 4717.12
Water Charges and sundries 1.00% 47.17
Overheads 7.50% on 4717.12 353.78
Contractors profit 7.50% on 4717.12 353.78
C 5471.85
Contract Tax 0.00% on C 0.00
Total 5471.85
Rate per 1 cum Rs 5471.85
Page 52
Water Charges and sundries 1.00% 49.74
Overheads 7.50% on 4974.48 373.09
Contractors profit 7.50% on 4974.48 373.09
C 5770.40
Contract Tax 0.00% on C 0.00
Total 5770.40
Rate per 1 cum Rs. 5770.40
Providing Ekra walling with matured bamboo spits with
15mm th. cement plaster 1:3mix (1cement, 3clean
10.10 coarse sand) mixed with Recron 3S of fiber length 4.8
mm ( 100 gm/bag of cement) on both sides i/c curing
complete.
Details of cut of 10m2 material.
One matured bamboo can cover 3m2 i/c wastage.
Recron 3S gm 175.44 0.40 70.18
To cover 10m ten bamboos is required
2
Each 3.33 150.00 500.00
Labour. Thatcher/Carpenter II each 0.60 275.00 165.00
Carpenter III Each 2.00 250.00 500.00
Helper. each 2.50 200.00 500.00
Total A 1735.18
Water Charges and sundries 1.00% 17.35
Overheads 7.50% on 1735.18 130.14
Contractors profit 7.50% on 1735.18 130.14
C 2012.81
Contract Tax 0.00% on C 0.00
Total Rs. 2012.81
Add cost of cement plaster 1:3 mix sqm 20.00 163.27 3265.40
Total for 10 sqm Rs. 5278.21
Rate per 1 sqm Rs. 527.82
Page 53
Providing & laying solid block (10cmx15cmx30cm) of
1:3:6 c.c (1cement, 3clean coarse sand, 6clean hard
stone chips of 20mm nominal gauge) in 1:4 c.m.
10.12
(1cement, 3clean coarse sand) mixed with Recron 3S
of fiber length 4.8 mm ( 100 gm/bag of cement) i/c
curing complete.
Details for 10m2 Blocks i/c wastage. 100Nos 2.90 2231.20 6470.49
Cost of laying solid blocks in 1:4 CM cum 0.28 3365.31 942.29
Recron 3S gm 212.80 0.40 85.12
Labour: Mason I each 0.10 300.00 30.00
Mason II each 0.50 275.00 137.50
Masson III Each 1.25 250.00 312.50
Ordinary Labour each 1.25 200.00 250.00
Waterman each 0.05 200.00 10.00
A 8237.90
Water Charges and sundries 1.00% 82.38
Overheads 7.50% on 8237.90 617.84
Contractors profit 7.50% on 8237.90 617.84
C 9555.96
Contract Tax 0.00% on C 0.00
Total for 10 sqm Rs. 9555.96
Rate per 1 sqm Rs. 955.60
11 FLOORING WORKS:
Providing and laying of 18mm thick 30 cm height
cement plaster skirting with cement mortar 1:3
11.1 (1cement,3coarse sand) finished with a floating coat of
neat cement including rounding of junctions and curing
etc. complete. Analysis for 10 sqm
Cement Mortar 1:3 0.205cum.
Add for rounding corners @15% 0.031cum.
0.236cum cum. 0.24 4321.42 1019.86
Cement for finishing coat. qtl 0.20 735.48 147.10
Labor Mason II each 1.40 275.00 385.00
O / Labor each 1.40 200.00 280.00
Waterman each 0.15 200.00 30.00
A 1861.96
Water Charges and sundries 1.00% 18.62
Overheads 7.50% on 1861.96 139.65
Contractor's Profit 7.50% on 1861.96 139.65
C 2159.88
Contract Tax 0.00% on C 0.00
For 10 sqm 2159.88
For 1 sqm Rs. 215.99
Providing and laying of 21mm thick 30 cm height
cement plaster skirting with cement mortar 1:3
11.2 (1cement,3coarse sand) finished with a floating coat of
neat cement including rounding of junctions and curing
etc. all complete. Analysis for 10 sqm
C.M. 1:3 0.235cum.
Add for rounding corners @15% 0.035cum.
0.270cum. cum. 0.27 4321.42 1166.78
Cement for finishing coat. qtl 0.20 735.48 147.10
Labor Mason I each 1.61 300.00 483.00
O / Labor each 1.61 200.00 322.00
Waterman each 0.17 200.00 34.60
A 2153.48
Water Charges and sundries 1.00% 21.53
Overheads 7.50% on 2153.48 161.51
Contractor's Profit 7.50% on 2153.48 161.51
Page 54
C 2498.03
Contract Tax 0.00% on C 0.00
For 10 sqm 2498.03
For 1 sqm Rs. 249.80
Page 55
Contract Tax 0.00% on C 0.00
For 10 sqm 3134.77
For 1 sqm Rs. 313.48
Page 56
Masson III each 0.40 250.00 100.00
A 210.00
Water Charges and sundries 1.00% 2.10
Overheads 7.50% on 210.00 15.75
Add for contractors profit. 7.50% on 210.00 15.75
243.60
Contract Tax 0.00% on C 0.00
Total for 10 sqm Rs. 243.60
Rate per 1 sqm Rs. 24.36
Page 57
C 4077.83
Contract Tax 0.00% on 0.00
Total for 10 sqm Rs. 4077.83
Rate per 1 sqm Rs. 407.78
Page 58
Masson III each 1.50 250.00 375.00
Ordinary labour. each 1.50 200.00 300.00
Waterman. each 0.15 200.00 30.00
Mason III for rubbing & polishing. each 1.00 250.00 250.00
A 7204.24
Water Charges and sundries 1.00% 72.04
Overheads 7.50% on 7204.24 540.32
Contractor's Profit 8% on 7204.24 540.32
8356.92
Contract Tax 0% on 0.00
Total for 10 sqm Rs. 8356.92
Rate per 1 sqm Rs. 835.69
Page 59
b) Top layer 6mm thick marble chips 1 to 4 mm size
Marble chips. qtl 0.90 3570.00 3213.00
Cement. qtl 0.41 735.48 301.54
Marble powder. qtl 0.01 510.00 3.57
Pigment. Kg. 2.87 70.00 200.90
Labour. Mason I each 1.50 300.00 450.00
Masson III each 1.50 250.00 375.00
Ordinary labour. each 1.50 200.00 300.00
Waterman. each 0.15 200.00 30.00
Mason III for rubbing & polishing. each 1.00 250.00 250.00
A 6480.78
Water Charges and sundries 1.00% 64.81
Overheads 7.50% on 6480.78 486.06
Contractor's Profit 7.50% on 6480.78 486.06
7517.71
Contract Tax 0.00% on 0.00
Total for 10 sqm Rs. 7517.71
Rate per 1 sqm Rs. 751.77
Page 60
a) Materials: For under layer 12 mm thick
15mm layer c.m. 1:3 = 0.172
Extra for rounding. = 0.030
= 0.202 cum. 0.20 4321.42 872.93
b) Top layer 6mm thick marble chips 1 to 4 mm size
Marble chips. cum. 0.90 3570.00 3213.00
White cement. qtl 0.41 2500.00 1025.00
Marble powder. qtl 0.12 510.00 62.73
Pigment. Kg. 2.87 70.00 200.90
Labour. Mason I each 3.00 300.00 900.00
Masson III each 1.50 250.00 375.00
Ordinary labour. each 1.50 200.00 300.00
Waterman. each 0.15 200.00 30.00
Mason III for rubbing & polishing. each 6.00 250.00 1500.00
A 8479.56
Water Charges and sundries 1.00% 84.80
Overheads 7.50% on 8479.56 635.97
Contractor's Profit 7.50% on 8479.56 635.97
9836.30
Contract Tax 0.00% on 0.00
Total for 10 sqm Rs. 9836.30
Rate per 1 sqm Rs. 983.63
Page 61
Providing and laying flooring with marble stone slabs
(Zebra black marble or equivalent) flooring of size not
less than 1.0 sqm of 20mm thick laid over
20mm(average)1:4cm thick bare laid cement concrete
11.18
and joint treated with white cement, mixed with
matching pigment, curing including rubbing to give a
granite finish, as per the direction of engineer in
charge.
Detais of cost of marble flooring for 10 sqm area
Materials: Under layer 20mm thick 1:4 mix CC cum 0.22 3365.31 753.83
Cement slurry @4.4 Kg for beading 44 Kg
Jointing 6
50 Kg
qtl 0.50 735.48 367.74
Marble slab 10.00 sqm
Waistage @ 25% 2.50 sqm
12.50 sqm 730.00 9125.00
Labour for fitting & fixing Masson - I each 8.15 300.00 2445.00
Masson - III each 4.00 250.00 1000.00
Other labour each 4.00 200.00 800.00
Water man each 0.50 200.00 100.00
Masson III for rubbing & Polishing each 1.00 250.00 250.00
A 14841.57
Water Charges and sundries 1.00% 148.42
Overheads 7.50% on 14841.57 1113.12
Contractors profit 7.50% on 14841.57 1113.12
C 17216.23
Contract Tax 0.00% on C 0.00
Total for 10 sqm Rs. 17216.23
Rate per 1 sqm Rs. 1721.62
Page 62
Total for 10 sqm Rs. 22581.22
Rate per 1 sqm Rs. 2258.12
Page 63
Contract Tax 0.00% on C 0.00
For 10 M Rs. 1363.01
For 1 m Rs. 136.30
Page 64
Providing and laying 20mm thick granite stone in
Risers of steps, skirting and pads, walls, pillars etc laid
on 10mm thick base c.m. 1:3 joint treated with white
11.25
cement, mixed with matching pigment, curing including
rubbing to give a granite finish, as per diection of
engineer in charge.
Materials:
Cement Mortar 1:3 mix cum. 0.12 4321.42 527.21
Cement for slurry. For bedding = 44 Kg.
For joints = 6 Kg.
= 50 Kg. qtl 0.50 735.48 367.74
Marble 10.00m2.
25% wastage 2.50m2.
=12.50m2. m2 12.50 1400.00 17500.00
Labour. Mason I. each 9.15 300.00 2745.00
Masson III each 4.50 250.00 1125.00
Other labour. each 4.50 200.00 900.00
Water man each 0.25 200.00 50.00
Mason III for rubbing/polishing. each 7.00 250.00 1750.00
A 24964.95
Water Charges and sundries 1.00% 249.65
Overheads 7.50% on 24964.95 1872.37
Contractor's Profit 7.50% on 24964.95 1872.37
28959.34
Contract Tax 0.00% on 0.00
For 10 sqm 28959.34
Rate per 1 sqm Rs. 2895.93
Page 65
Providing and laying kota stone slabs 25mm thick in
Risers of steps, skirting dado and walls laid on 12mm
11.27 thick (average) thick base of c.m. 1:4 (1 cement, 4
coarse sand) and jointed with grey cement slurry
mixed with pigments to match the shade.
Page 66
Add wastage = 0.56 No.
= 11.67 No.=1.05 sqm
Cost of tiles. sqm. 1.05 1100.00 1155.00
White cement for slurry over. qtl 0.03 2500.00 59.40
Labour: Mason I. each 0.50 300.00 46.00
Ordinary Labour each 0.50 200.00 42.50
A 1354.76
Water Charges and sundries 1.00% 13.55
Overheads 7.50% on 1354.76 101.61
Contractor's Profit 7.50% on 1354.76 101.61
C 1571.53
Contract Tax 0.00% on C 0.00
For 1 sqm 1571.53
For 1 sqm Rs. 1571.53
Materials:
12mm c.m. 1:3. cum. 0.01 4321.42 51.86
Tiles (300mmx 300mm). = 11.11 No.
Add wastage = 0.56 No.
= 11.67 No.=1.05 sqm
Cost of tiles. sqm 1.05 1340.00 1407.00
White cement for slurry over. qtl 0.03 2500.00 82.50
Labour: Mason I. each 0.50 300.00 150.00
Ordinary Labour each 0.50 200.00 100.00
A 1791.36
Water Charges and sundries 1.00% 17.91
Overheads 7.50% on 1791.36 134.35
Contractor's Profit 7.50% on 1791.36 134.35
C 2077.97
Contract Tax 0.00% on C 0.00
For 1 sqm 2077.97
For 1 sqm Rs. 2077.97
Page 67
For 1 sqm Rs. 970.58
Page 68
Other labour. each. 0.75 200.00 150.00
A 992.23
Water Charges and sundries 1.00% 9.92
Overheads 7.50% on 992.23 74.42
Contractor's Profit 7.50% on 992.23 74.42
C 1150.99
Contract Tax 0.00% on C 0.00
For 1 sqm 1150.99
For 1 sqm Rs. 1150.99
Materials:
12mm c.m. 1:3. cum. 0.01 4321.42 51.86
Tiles (300 x 200 mm). = 16.67 No.
Add 5% wastage = 0.84 No.
= 17.51 No.=1.05 sqm
Cost of tiles. sqm 1.05 320.00 336.00
White cement for slurry over. qtl 0.03 2500.00 82.50
Labour: Mason I. each 0.50 300.00 150.00
Ordinary Labour each 0.50 200.00 100.00
A 720.36
Water Charges and sundries 1.00% 7.20
Overheads 7.50% on 720.36 54.03
Contractor's Profit 7.50% on 720.36 54.03
C 835.62
Contract Tax 0.00% on C 0.00
For 1 sqm 835.62
For 1 sqm Rs. 835.62
Page 69
Providing and laying white or colored glazed tiles anti
skid of glossy series or celebrity, elegant or equivalent
in flooring, treads of steps landing etc laid on a bed of
11.37
15mm, cm 1:3 (1cement, 3coarse sand) finished with
flush pointing with white cement slurry. Analysis for 1
sqm
Materials:
12mm c.m. 1:3. cum. 0.01 4321.42 51.86
Tiles (300 x 200 mm). = 16.67 No.
Add 5% wastage = 0.84 No.
= 17.51 No.=1.05 sqm
Cost of tiles. sqm 1.05 450.00 472.50
White cement for slurry over. qtl 0.03 2500.00 82.50
Labour: Mason I. each 0.50 300.00 150.00
Ordinary Labour each 0.50 200.00 100.00
A 856.86
Water Charges and sundries 1.00% 8.57
Overheads 7.50% on 856.86 64.26
Contractor's Profit 7.50% on 856.86 64.26
C 993.95
Contract Tax 0.00% on C 0.00
For 1 sqm 993.95
For 1 sqm Rs. 993.95
Page 70
Providing & laying Plum concrete in 1:2:4 c.c.
(1cement, 2coarse sand, 4clean hard graded stone
12.1 chips of 20 mm down nominal gauge) with 50% clean
hard stone of sizes not exceeding 15cm including
shuttering, compacting and curing complete.
Page 71
Mason II. each 3.50 275.00 962.50
Ordinary Labour. each 3.50 200.00 700.00
A 4212.50
Water Charges and sundries 1.00% 42.13
Overheads 7.50% on 4212.50 315.94
Contractor's profit. 7.50% on 4212.50 315.94
C 4886.51
Contract Tax 0.00% on C C 0.00
Total for 10 cum 4886.51
For 1 cum Rs. 488.65
Page 72
Providing and laying. Random Rubble Stone Masonry
in 1:4:8 c.c. (1cement, 4 sand, 8 clean hard graded
stone chips of 40 mm nominal gauge) including bond
stone, through stoneof zise 150mm x 150mm x
12.6
450mm manufactured in 1:4:8 (1cement, 4 clean
coarse sand, 8 clean hard selected stone aggregate of
size 40 mm and down) and curing etc, complete but
excluding the cost of the carriage of materials.
Page 73
Through bond stone each 7.00 45.37 317.59
Labour. Mason II. each 2.05 275.00 563.75
Ordinary labour. each 2.00 200.00 400.00
Waterman. each 0.20 200.00 40.00
Total A 2384.56
Water Charges and sundries 1.00% 23.85
Overheads 7.50% on 2384.56 178.84
Contractor's profit. 7.50% on 2384.56 178.84
C 2766.09
Contract Tax 0.00% on C 0.00
Total for 1.00 cum 2766.09
For 1 cum Rs. 2766.09
Unit = cum
Taking output = 7 x 3 x 0.6 = 12.60 cum
a) Labour
Mate day 0.28 300.00 84.00
Mazdoor day 5.00 200.00 1000.00
Mazdoor (Skilled) day 2.00 250.00 500.00
b) Material
Galvanised steel wire crates of mesh size 100 sqm 61.00 230.00 14030.00
mm x 100 mm woven with 4mm dia. GI wire in
rolls of required size.
Stone boulders with least dimension of 200 mm cum 12.60 300.00 3780.00
Stone spalls cum 2.52 300.00 756.00
Total A 20150.00
Water Charges and sundries 1.00% 201.50
Overheads 7.50% on 20150.00 1511.25
Page 74
Contractor's profit. 7.50% on 20150.00 1511.25
C 23374.00
Contract Tax 0.00% on C 0.00
Total for 12.60 cum 23374.00
For 1 cum Rs. 1855.08
Readymade woven wire crate rolls have been considered in the rate analysis. In case readymade rolls are not available, GI
wire 4mm dia. @ 32 kg per 10 sqm may be provided. In that case 2 per cent of the cost of GI wire may be added for
weaving the wire crates.
Providing and laying parapet of standard size on 1:2:4
( (1cement, 2coarse sand, 4clean hard graded stone
chips of 20 mm down nominal gauge) plum concrete
12.11
and plastering with 1:4 mix cement mortar of 12mm
thick with lime washing three or more coats all
complete.
45cm height, 30 cm top and 45 cm bottom
1:2:4 plum cum 0.17 3441.42 580.74
Cement plaster in 1:4 mix sqm 1.56 116.33 181.65
Lime washing sqm 1.56 8.97 14.00
B 776.39
Contractor's profit. 7.50% on 776.39 58.23
C 834.62
Contract Tax 0.00% on C 0.00
Total for 1.00 m 834.62
For 1 m Rs. 834.62
60cm height, 45 cm top and 60cm bottom
1:2:4 plum cum 0.32 3441.42 1084.05
Cement plaster in 1:4 mix sqm 2.30 116.33 267.38
Lime washing sqm 2.30 8.97 20.61
B 1372.04
Contractor's profit. 7.50% on 1372.04 102.90
C 1474.94
Contract Tax 0.00% on C 0.00
Total for 1.00 m 1474.94
For 1 m Rs. 1474.94
Providing and making through stone / bond stone in
1:4:8 mix cement concrete of size 150mm x 150mm x
12.12
450mm i/c centering shuttering and curring all
complete:
1:4:8 CC = 10 x 0.15 x 0.15 x 0.45= cum 0.10 2704.06 273.92
Form work: 10 x 2 x 0.50 x 0.15= 1.50 sqm
10 x 1 x0.50 x 0.15 = 0.75 sqm
10 x 2 x0.15 x 0.15 = 0.45 sqm
2.70 sqm
2.70 x 0.025 = 0.0675 cum
This can be used for 150 times= 0.0005 cum 13942.66 6.27
Labour. Mason II. each 0.25 275.00 68.75
Ordinary labour. each 0.50 200.00 100.00
Waterman. each 0.01 200.00 2.00
Total A 450.94
Water Charges and sundries 1.00% 4.51
Overheads 7.50% on 450.94 33.82
Contractor's profit. 7.50% on 450.94 33.82
B 523.09
Contract Tax 0.00% on 0.00
Total for 10.00 Nos C 523.09
For 1 nos 1 Nos Rs. 52.31
13 DRAINAGE
Page 75
Providing standard 'V' shaped drain with hammer
dressed clean hard selected stones and finished with
13.1
cement pointing in 1:4 cement mortar including curing
etc complete.
Analysis for 10RM.
Cement. qtl 0.23 735.48 165.48
Stone. Sloping side: 10x0.67x0.15 = 1.01
Vertical side (+) 10x0.15x0.45 = 0.68
Total = 1.69 cum cum 1.69 300.00 507.00
Sand. cum 0.05 350.00 17.50
Labour. (Mason Class I). day 0.33 300.00 99.00
Mason II. day 1.50 275.00 412.50
Labour (Helper) day 2.00 200.00 400.00
A 1601.48
Water Charges and sundries 1.00% 16.01
Overheads 7.50% on 1601.48 120.11
Contractor's profit. 7.50% on 1601.48 120.11
1857.71
Contract Tax 0.00% 0.00
1857.71
For 1 RM Rs. 185.77
Providing box drain of 30 cm (ht) x 45 cm (width)
internal dimension with 1:2:4 Plum concrete (20mm &
down) in side walls thickness of 23 cm (hill side) and
30 cm (road side) and 1:3:6 (20 mm & down) base
13.2
concrete of thickness of 15 cm with standard
specification over 15 cm stone soling including
providing & laying guard stone complete as per the
direction of Engineer in Charge.
Analysis for 10 RM
Plum Concrete 1:2:4
Side 1x10x0.30x0.30 = 0.90 cum
Side 1x10x0.23x0.30 = 0.69 cum
Total = 1.59 cum 3441.42 5471.86
1: 3 : 6 Base 1x10x0.98x0.15 = 1.47 cum 3294.80 4843.36
Foundation excavation.1x10x0.60x0.98 (manual
cum 5.88 207.00 1217.16
means)
stone soling.1x10x0.98x0.15 (manual means) cum 1.47 568.00 834.96
Guard Stones @ 1 no per 2 mtr,5 no in 10 m one side
cum 0.03 7722.78 231.68
5 no x 0.125 x 0.125x 0.30 = 0.03 cum of stone
Rate for 10 m Rs. 12599.02
Rate for 1 m Rs. 1259.90
Providing box drain of 60 cm (ht) x 45 cm (width) of
internal dimension with 1:2:4 Plum concrete (40mm &
down) side wall thickness of 23 cm (hill side) and 30
cm (road side) with1:3:6 (20 mm & down) base
13.3
concrete of thickness of 15 cm with standard
specification over 15 cm stone soling including
providing & laying guard stone complete as per the
direction of Engineer in Charge.
Analysis for 10 RM
Plum Concrete 1:2:4
Side 1x10x0.30x0.60 = 1.8 cum
Side 1x10x0.23x0.60 = 1.38 cum
Total = 3.18 cum 3441.42 10943.72
Base 1x10x0.98x0.15 = 1.47 cum 3294.80 4843.36
Foundation excavation.1x10x0.90x0.98 cum 8.82 207.00 1825.74
stone soling.1x10x0.98x0.15 cum 1.47 568.00 834.96
Page 76
Guard Stones @ 1 no per 2 mtr,5 no in 10 m one side
each 0.03 7722.78 231.68
5 no x 0.125 x 0.125x 0.30 = 0.03 cum of stone
Rate for 10 m Rs. 18679.46
Rate for 1 m Rs. 1867.95
Analysis for 10 RM
Plum Concrete 1:2:4
Sides 2x10x0.15x0.23 = 0.69 cum
Total = 0.69 cum 3441.42 2374.58
Base 1x10x0.53x0.15 = 0.795 cum 3294.80 2619.37
Foundation excavation.1x10x0.53 x0.53 cum 2.81 207.00 581.67
stone soling.1x10x0.53x0.15 cum 0.80 568.00 454.40
Cement Plaster 1:3 sqm 6.90 132.30 912.87
Rate for 10 m Rs. 6942.89
Rate for 1 m Rs. 694.29
14 FORM WORK:
Providing, fixing & removing form work for casting
14.1 R.C.C items as indicated below:(with imported timber
from outside the state)
Form work for beam, lintels, girders, brersumers &
a)
cantilevers.
Consider a beam of 400mm x 300mm x 5m long giving
an area of 5.74sqm.
Page 77
Bottom - 1x5x0.30 = 1.50sqm.
Sides - 2x5x0.40 = 4.00sqm.
Closing end:2x.30x.4 = 0.24sqm.
Total. = 5.74sqm.
Form work with 38mm thick katus planks considering
150mm wide planks.
Material:
38mm planks.
Bottom=2x5.0x0.15x.038 = 0.057cum.
Sides = 2x3x5.0x0.15x.038= 0.171cum.
Ends = 2x3x.40x.15x.038= 0.013cum.
0.241 cum
Add wastage 5% ...... 0.012 cum
0.253cum
Qty. of 38mm planks = 0.260 cum. cum 0.26
75mmx50mm reapers.
To fix bottom with sides.
2x5.0x0.075x0.05 =0.0375cum.
For ends of inclined support.
2x5.0x0.075x0.05 =0.0375cum.
For brackets over ballies horizontal.
7x1.00x0.075x0.05 =0.026 cum.
Inclined.
2x7x0.6x0.075x0.05 =0.031 cum.
Total =0.132 cum.
Add 5% wastage =0.006 cum.
0.138 cum. cum 0.14
50mmx40mm battens to pin the planks.
For joining bottom and supporting.
12x0.3x0.05x0.04 =0.0072 cum.
For joining sides.
2x12x0.45x0.05x0.04 =0.0216 cum.
For top supports.
16x0.45x0.05x0.04 =0.0144 cum.
For inclined supports.
2x12x0.45x0.04x0.05 =0.0216 cum.
Add wastage. =0.0032 cum.
0.0680 cum. cum 0.07
Total of timber (i)+(ii)+(iii) 0.47
cft 16.58 395.20 6552.42
Carriage of timber 4.50% 294.86
Bolts 150mm long 20mm dia to join bottom planks to sides.
2x16 = 32 Nos.
Add wastage. = 3 Nos.
35 Nos. Nos 35.00 50.00 1750.00
8597.28
Considering the above materials, can be used for 8
times cost of material to do 5.74sqm. of form work of (I) 1074.66
beam.
100m dia ballies on 100mx75mm beam to support the
beam.
100mmx75mm beam.
1x7= 7Nos. 3.00m long.
7x3x0.10x0.075 = 0.1575cum.
Beams for braces.
2x5.0x0.1x0.075 = 0.0750cum.
0.2325cum.
Add 5% wastage. 0.0116cum.
0.2441cum. = cft 8.61 395.20 3402.67
Page 78
Carriage of Ballies 4.50% 153.12
3555.79
Considering the beams can be used for 10 times cost
( II ) 355.58
of ballies/beams for 5.74sqm of form work.
Labour for making Shutters
Carpenter III Nos 0.80 275.00 220.00
Helper Nos 0.80 200.00 160.00
380.00
Since the shutter can be used for ten repetition, cost
( III ) 38.00
for making for one use
Labour for fixing & releasing the form work including
making.
Labour Masson - I Nos. 0.25 300.00 75.00
Carpenter III Nos. 1.35 250.00 337.50
Helper (O/L). Nos. 1.35 200.00 270.00
Total ( IV ) 682.50
Cost of material & labour for 5.74 sqm. of beam with
(I)+ II)+ (III)+(IV) = A 2150.74
planks.
Water Charges and sundries 1.00% 21.51
Overheads 7.50% on 2150.74 51.19
Contractors profit 7.5% on 2150.74 161.31
C 2384.75
Contract Tax 0.00% on C 0.00
Cost for 5.74 sqm 2384.75
Rate for 1 sqm 1.00 sqm Rs. 415.46
Page 79
Ballies 100mmx75mm to support the reinforcements.
5x2= 10Nos of 4m long.
As cross ballies on above ballies.
5x2x4 = 40Nos. 0.8m long i.e.8Nos. 4m long
For supports on all 4 sides in two rows.
5x4x5x2 = 200 Nos. of 0.3m = 60m.
i.e. 15 Nos. 4m long.
Total Nos. of ballies=10+8+15=33Nos.
= 33 x 4.00 x 0.10 x0.075 m. long. cft 34.92 395.20 13800.38
Carriage of timber 4.50% 621.02
14421.40
These ballies considering the wet condition of Sikkim
can be used for 10 repetitions. Therefore cost of (B) 1442.14
ballies
Labour for making boxes 5 Nos.
The planks have to be joined and neat boxes to be
manufactured.
Carpenter III Each 2.20 250.00 550.00
Helper (O/L). Each 2.20 200.00 440.00
990.00
Considering the boxes can be used for 5 repetition, (C) 198.00
Labour for fixing & releasing Form work.
Labour Masson - I each. 0.25 300.00 75.00
Carpenter III each. 2.50 250.00 625.00
Helper (O/L). each. 2.50 200.00 500.00
(D) 1200.00
Cost of material & labour for 15sqm. of form work. (A+B+C+D) 5853.48
Water Charges and sundries 1.00% 58.53
Overheads 7.50% on 5853.48 90.00
Contractors profit 7.5% on 5853.48 439.01
C 6441.02
Contract Tax 0.0% on C 0.00
Cost for 15.00 sqm 6441.02
Rate for 1 sqm Rs. 429.40
Page 80
2x10x1.00x1.20 = 24.00sqm.
Add 5% wastage = 1.20sqm.
= 25.20sqm. = 25.20 sqm
cft 22.51 395.20 8895.95
Carriage of timber 4.50% 400.32
9296.27
Considering the planks can be used for four times. ( II ) 2324.07
Bolts 12mm-150mm long.
2x11x7Nos. = 154 Nos. @Rs.15/No. = 2310
Considering the salvage value of steel as 25% =
( III ) 1732.50
3/4x2310 =1732.50
Tie bolts 12mm dia to fix the opposite shutters i/c
carriage.
10x6 = 60Nos. @15/each. = 900.00 (IV ) 900.00
Materials for supporting form work. Ballies or wooden
beam 100mx75mm.
Beams for bottom support 0.50m
10x2 x 2 x 0.50 = 20.0 m.
Beam supporting to portion 0.75m long
= 10x2x2 x 0.75 = 30.0m.
25% for upper bolts. 50.0x25/100 = 12.50m
= 62.50m cft 16.92 395.20 6686.78
Carriage of timber 4.50% 300.91
6987.69
Considering the ballies can be used for 40 times (V) 174.69
Rafters 75mmx50mm for tie bolt fixing & resting
supports.
2x3x10.x0.075x0.05 = 0.225cum. = 7.938cft. cft 7.94 395.20 3137.10
Carriage of timber 4.50% 141.17
3278.27
Considering the beams can be used for 10times
( VI ) 327.83
considering the humid/wet condition of Sikkim.
Labour for making boxes 20Nos.
Carpenter III each 3.15 250.00 787.50
Helper (O/L.) each 3.15 200.00 630.00
1417.50
Considering the shutters made can be used for 10
( VII ) 141.75
times.
Labour for fixing and releasing of frame work.
Labour Masson - I each 1.00 300.00 300.00
Carpenter III each 3.75 250.00 937.50
Helper (O/L) each. 3.75 200.00 750.00
Therefore cost of materials & labour for 24sqm form
1987.50
work
Total ( I + II + III + IV + V + VI + VII + VIII ) = A 9125.47
Water Charges and sundries 1.00% 91.25
Overheads 7.50% on 9125.47 684.41
Add for contractors profit 8% on 9125.47 684.41
C 10585.54
Contract Tax 0% on C 0.00
Cost for 24.00 10585.54
For 1.00 441.06
Rate for 1 sqm Rs. 441.06
Page 81
Planks 38 mm thick local wood in Uttis etc of size 1.83
and 150mm wide.
No. of planks required to cover the roof of the room =
20 x 2 = 40 Nos.
40x1.83x0.15x0.038 = 0.4170cum
Roof sides 2x4.2x0.15x.038 = 0.0479cum
2x3.50x0.15x0.038 = 0.0399cum
= 0.5048cum
Add 5% wastage. = 0.0252cum
0.5300cum
Rafters 100mmx75mm.
5x3.05x0.10x0.075 = 0.114cum.
Add 5% wastage = 0.005cum.
= 0.119cum.
Battens 50mmx40mm to fix the outer sides.
4x6x0.30x0.05x0.04 = 0.014cum.
Therefore total qty of timber =
0.530+0.119+0.014 = 0.663cum. Cft 23.39 395.20 9243.73
Carriage. 4.50% 415.97
9659.70
Considering the timber can be used for 4 times only. 2414.93
Cost for 13.07sqm (I) 2414.93
Ballies/beam of 100mmx75mm.
No. of ballies required to cover the room= 5x5=
25Nos. of 3.00m.
No. of beams/ballies to support the sides.
2 x 6 = 12
2 x 6 = 12
3 m. long. = 24 Nos
Therefore No. of beam = 49 Nos.
=49x3x0.10x0.075 = 1.102cum.
Beams of 100mmx75mm for framing.
3m long. Inside = 2x5 = 10Nos
3m long. Other sides 2x5 = 10Nos
3m long Outside 2 x 2 = 4Nos
3m long 2 x 2 = 4Nos
= 28.00 Nos
28x3x0.10x0.075 = 0.63cum.
Cost for 1.102+0.63cum bating beam cft 61.10 395.20 24146.72
5% wastage. 5% 1207.34
25354.06
Carriage. 4.50% 1140.93
26494.99
Considering the beams can be used for 8 times. ( II ) 3311.87
Labour for fixing and releasing of frame work.
Labour Masson - I each. 1.00 300.00 300.00
Carpenter III. each. 2.40 250.00 600.00
Helper (O/L.) each. 2.40 200.00 480.00
(III) 1380.00
Page 82
Rate for 1 sqm Rs. 630.75
e) Circular columns
Form work with timber backing for round column of
size 38mm dia of 2.00m long giving an contact area of
2.40sqm.
Materials:
2 x 5 x 0.19 x 2.00 = 2.40sqm.
Wastage. = 0.20sqm.
= 2.60 x 0.038sqm. cft 3.49 395.20 1379.25
38mm thick planks for curvature & straight portion.
For curved portion.
2x5x0.60x0.30x0.038 = 0.0684cum
Straight portion.
2x2x2.00x0.10x0.038 = 0.0304cum
50mmx5-mm battens fixed vertically in column shutter.
4x2.00x0.05x0.05 = 0.0200cum
Total = 0.1188cum.
Wastage= 0.0062cum.
0.125cum. Cft. 4.41 395.20 1742.83
16mm dia 125mm long bolts Nuts &
washers. 2x12 = 24 Nos.
Add wastage = 1 No.
25 Nos. No. 25.00 50.00 1250.00
4372.08
Carriage of timbers and ply 4.5% 196.74
4568.82
Considering that the above shutters can be used for 8
(I) 571.10
times.
Page 83
Cost for 2.40 1727.94
For 1.00 719.98
Rate for 1 sqm Rs. 719.98
f) Square columns
Column with shuttering 38mm thick planks.
Consider a column size 0.30x0.30 & 2mm long.
Contact area of column= 4x0.3x2.00 = 2.4sqm.
Considering the plan width = 150mm and thickness
38mm
Materials:
12mm thick planks.
2x2x0.3=1.20sqm
2x2x0.4=1.60sqm
Total 2.80sqm
Add wastage = 0.20sqm
Total 3.00x 0.038= 0.114 cft 4.02 395.20 1589.49
Timber for backing 75mmx50mm reapers.
Verticals: 2x4x2.00x0.075x0.05 = 0.0600cum.
Horizontal: 4x5x0.30x0.075x0.05 = 0.0225cum.
= 0.0825cum.
Add wastage = 0.0025cum.
Total ........ = 0.0850cum. cft 3.00 395.20 1185.13
90mmx60mm runners to fix bolts.
5x4x0.90x0.09x0.06 = 0.0972cum.
Add wastage = 0.0028cum.
Total = 0.1000cum. cft 3.53 395.20 1394.27
Total cost of timber. 4168.89
Considering the planks and timber can be used for 10
416.89
times, cost of timber for 2.8sqm of form work
Carriage of timber and ply 4.5% 18.76
(I) 435.65
16mm dia 750 mm long M.S. bolts & double nuts.
4x5 = 20 nos. Each 20.00 50.00 1000.00
The nuts and bolts can be used for 15 times ( II ) 66.67
Ballies/beams to support the column box.
100mmx75mm.
8x2x0.10x0.075 = 0.12 cum
Horizontals: 4x2Nos.x0.10x0.075x3.50 = 0.21 cum
Verticals: 4x2x3.00x0.10x0.075 = 0.18 cum
= 0.51 cum Cft. 17.99 395.20 7110.83
Considering the ballies can be used for 15 times, cost
( III ) 474.06
of supports
( IV ) 120.00
Labour for fixing/releasing the Form work.
Labour Masson - I each. 0.10 92.00 9.20
Carpenter III. each. 0.40 89.00 35.60
Helper. each. 0.40 85.00 34.00
( V) 78.80
Total cost = ( I ) + ( II ) + ( III ) + ( IV ) + ( V ) = A 1175.18
Water Charges and sundries 1.00% 11.75
Overheads 7.50% on 1175.18 88.14
Add for contractors profit 7.50% on 1175.18 88.14
C 1363.21
Contract Tax 0.00% on C 0.00
Page 84
Cost for 2.40 1363.21
For 1.00 568.00
Rate for 1 sqm Rs. 568.00
Page 85
Considering the above materials, can be used for 8
times cost of material to do 5.74sqm. of form work of (I) 827.93
beam.
Page 86
Batten 50mmx40mm to join the 150mm wide planks:
For long sides.
5x2x5x0.30x0.05x0.04 = 0.03cum.
For short sides.
5x2x3x0.3x0.05x0.04 = 0.018cum.
0.048cum. ( III ) 0.05 cum
Total of (i),(ii)&(iii) 0.69 cum
cft 24.22 281.25 6811.88
Bolts 12mm dia - 15mm long.
5x4x2Nos. = 40 Nos. no 40.00 50.00 2000.00
8811.88
Carriage of timber. 0.05 306.53
9118.41
Considering the timber can be used for 4 repetition as
(A) 2279.60
per the wet condition of Sikkim.
Ballies 100mmx75mm to support the reinforcements.
5x2= 10Nos of 4m long.
As cross ballies on above ballies.
5x2x4 = 40Nos. 0.8m long i.e.8Nos. 4m long
For supports on all 4 sides in two rows.
5x4x5x2 = 200 Nos. of 0.3m = 60m.
i.e. 15 Nos. 4m long.
Total Nos. of ballies=10+8+15=33Nos.
= 33 x 4.00 x 0.10 x0.075 m. long. cft 34.92 281.25 9821.25
Carriage of timber 4.50% 441.96
10263.21
These ballies considering the wet condition of Sikkim
can be used for 10 repetitions. Therefore cost of (B) 1026.32
ballies
Labour for making boxes 5 Nos.
The planks have to be joined and neat boxes to be
manufactured.
Carpenter III Each 2.20 250.00 550.00
Helper (O/L). Each 2.20 200.00 440.00
990.00
Considering boxes can be used for 5 repetition, (C) 198.00
Labour for fixing & releasing Form work.
Labour Masson - I each. 0.25 300.00 75.00
Carpenter III each. 2.50 250.00 625.00
Helper (O/L). each. 2.50 200.00 500.00
(D) 1200.00
Cost of material & labour for 15sqm. (A+B+C+D) 4703.92
Water Charges and sundries 1.00% 47.04
Overheads 7.50% on 4703.92 352.79
Contractors profit 7.5% on 4703.92 352.79
C 5456.54
Contract Tax 0.0% on C 0.00
Cost for 15.00 5456.54
Rate for 1 sqm 1.00 Rs 363.77
Page 87
Total. = 0.48cum.
Add 5% wastage...... = 0.02cum.
= 0.50cum. = 0.50 cum
Planks 38mm thick 300mm wide for closing ends.
2x1.20x0.30x0.038 = 0.027cum.
Reapers 50x40mm for top support.
35x0.40x0.05x0.04 = 0.028cum.
Total qty of timber = 0.555cum. = 0.56 cum
1.06 cum
cft 37.22 281.25 10468.13
Carriage of timber 4.50% 471.07
10939.20
Considering timber used for backing shutters can be
(I) 1093.92
used for 10 times. Cost of timber for 24sqm.
Shuttering 1inch thick planks of local wood etc.
2x10x1.00x1.20 = 24.00sqm.
Add 5% wastage = 1.20sqm.
= 25.20sqm. = 25.20 sqm
cft 22.51 281.25 6330.94
Carriage of timber 4.50% 284.89
6615.83
Considering the planks can be used for four times. ( II ) 1653.96
Bolts 12mm-150mm long.
2x11x7Nos. = 154 Nos. @Rs.15/No. = 2310.00
Considering the salvage value of steel as 25% =
( III ) 1732.50
3/4x2310 =1732.50
Tie bolts 12mm dia to fix the opposite shutters i/c
carriage.
10x6 = 60Nos. @15/each. = 900.00 (IV ) 900.00
Materials for supporting form work. Ballies or wooden
beam 100mx75mm.
Beams for bottom support 0.50m
10x2 x 2 x 0.50 = 20.0 m.
Beam supporting to portion 0.75m long
= 10x2x2 x 0.75 = 30.0m.
25% for upper bolts. 50.0x25/100 = 12.50m
= 62.50m cft 16.92 281.25 4758.75
Carriage of timber 4.50% 214.14
4972.89
Considering the ballies can be used for 40 times (V) 124.32
Rafters 75mmx50mm for tie bolt fixing & resting
supports.
2x3x10.x0.075x0.05 = 0.225cum. = 7.938cft. cft 7.94 281.25 2232.56
Carriage of timber 4.50% 100.47
2333.03
Considering the beams can be used for 10times
( VI ) 233.30
considering the humid/wet condition of Sikkim.
Labour for making boxes 20Nos.
Carpenter III each 3.15 250.00 787.50
Helper (O/L.) each 3.15 200.00 630.00
1417.50
Considering the shutters made can be used for 10
( VII ) 141.75
times.
Labour for fixing and releasing of frame work.
Labour Masson - I each 1.00 300.00 300.00
Carpenter III each 3.75 250.00 937.50
Helper (O/L) each. 3.75 200.00 750.00
Therefore cost of materials & labour for 24sqm form
( VIII ) 1987.50
work
Total ( I + II + III + IV + V + VI + VII + VIII ) = A 7867.25
Page 88
Water Charges and sundries 1.00% 78.67
Overheads 7.50% on 7867.25 590.04
Add for contractors profit 7.50% on 7867.25 590.04
C 9126.00
Contract Tax 0.00% on C 0.00
Cost for 24.00 9126.00
Rate for 1 sqm 1.00 Rs. 380.25
Page 89
Carpenter III. each. 2.40 250.00 600.00
Helper (O/L.) each. 2.40 200.00 480.00
( III ) 1380.00
Therefore cost of material & labour for 13.07sqm. form
( I + II + III ) = A 5339.46
work with planks
Water Charges and sundries 1.00% 53.39
Overheads 7.50% on 5339.46 400.46
Add for contractors profit 8% on 5339.46 400.46
C 6193.77
Contract Tax 0% on C 0.00
Cost for 13.07 6193.77
For 1.00 473.89
Rate for 1 sqm Rs. 473.89
e) Circular columns
Form work with timber backing for round column of
size 38mm dia of 2.00m long giving an contact area of
2.40sqm.
Materials:
2 x 5 x 0.19 x 2.00 = 2.40sqm.
Wastage. = 0.20sqm.
= 2.60 x 0.038sqm. cft 3.49 281.25 981.56
38mm thick planks for curvature & straight portion.
For curved portion.
2x5x0.60x0.30x0.038 = 0.0684cum
Straight portion.
2x2x2.00x0.10x0.038 = 0.0304cum
50mmx5-mm battens fixed vertically in column shutter.
4x2.00x0.05x0.05 = 0.0200cum
Total = 0.1188cum.
Wastage= 0.0062cum.
0.125cum. Cft. 4.41 281.25 1240.31
16mm dia 125mm long bolts Nuts &
washers. 2x12 = 24 Nos.
Add wastage = 1 No.
25 Nos. No. 25.00 50.00 1250.00
3471.87
Carriage of timbers and ply 4.5% 156.23
3628.10
Considering that the above shutters can be used for 8
(I) 453.51
times.
315.00
Page 90
Considering the box thus made can be used for 8
( III ) 39.38
times
Labour for fixing and releasing form work.
Labour Masson - I each. 0.25 300.00 75.00
Carpenter II. each. 0.80 250.00 200.00
Helper. each 0.80 200.00 160.00
( IV ) 435.00
Cost of material and labour ( I + II + III + IV ) = A 1259.71
Water Charges and sundries 1.00% 12.60
Overheads 7.50% on 1259.71 94.48
Add for contractors profit 7.50% on 1259.71 94.48
C 1461.27
Contract Tax 0.00% on C 0.00
Cost for 2.40 1461.27
For 1.00 608.86
Rate for 1 sqm Rs. 608.86
g) Square columns
Column with shuttering 38mm thick planks.
Consider a column size 0.30x0.30 & 2mm long.
Contact area of column= 4x0.3x2.00 = 2.4sqm.
Considering the plan width = 150mm and thickness
38mm
Materials:
12mm thick planks.
2x2x0.3=1.20sqm
2x2x0.4=1.60sqm
Total 2.80sqm
Add wastage = 0.20sqm
Total 3.00x 0.038= 0.114 cft 4.02 281.25 1131.19
Timber for backing 75mmx50mm reapers.
Verticals: 2x4x2.00x0.075x0.05 = 0.0600cum.
Horizontal: 4x5x0.30x0.075x0.05 = 0.0225cum.
= 0.0825cum.
Add wastage = 0.0025cum.
Total ........ = 0.0850cum. cft 3.00 281.25 843.41
90mmx60mm runners to fix bolts.
5x4x0.90x0.09x0.06 = 0.0972cum.
Add wastage = 0.0028cum.
Total = 0.1000cum. cft 3.53 281.25 992.25
Total cost of timber. 2966.85
Considering the planks and timber can be used for 10
296.69
times, cost of timber for 2.8sqm of form work
Carriage of timber and ply 4.5% 13.35
(I) 310.04
16mm dia 750 mm long M.S. bolts & double nuts.
4x5 = 20 nos. Each 20.00 50.00 1000.00
The nuts and bolts can be used for 15 times ( II ) 66.67
Ballies/beams to support the column box.
100mmx75mm.
8x2x0.10x0.075 = 0.12 cum
Horizontals: 4x2Nos.x0.10x0.075x3.50 = 0.21 cum
Verticals: 4x2x3.00x0.10x0.075 = 0.18 cum
= 0.51 cum Cft. 17.99 281.25 5060.48
Considering the ballies can be used for 15 times, cost
( III ) 337.37
of supports
Labour Masson - I each. 0.10 300.00 30.00
Carpenter III. each. 0.20 275.00 55.00
Helper O/L. each. 0.20 200.00 40.00
( IV) 125.00
Page 91
Labour for fixing/releasing the Form work.
Labour Masson - I each. 0.10 300.00 30.00
Carpenter III. each. 0.40 275.00 110.00
Helper. each. 0.40 200.00 80.00
( V) Rs. 220.00
Total cost = ( I ) + ( II ) + ( III ) + ( IV ) + ( V ) = A 1059.08
Water Charges and sundries 1.00% 10.59
Overheads 7.50% on 1059.08 79.43
Add for contractors profit 7.50% on 1059.08 79.43
C 1228.53
Contract Tax 0.00% on C 0.00
Cost for 2.40 1228.53
For 1.00 511.89
Rate for 1 sqm Rs. 511.89
15 TIMBER WORKS:
Providing/ fitting/ fixing of undressed local wood (tooni,
15.1
katus equivalent) in all types of frames complete.
a) With imported timber from outside the state.
Consider the size of frames (chowkat) of a door as 1m x 2m
Details of cost of door frames for .0222 cum quantity.
Materials:
Assuming the dimension of the timber used as 100mm x 40mm
2x2.1x0.1x0.04 = 0.0168 cum
1x1.075x0.10x0.04 = 0.0043 cum
Total (finished work) = 0.0211 cum
Add 5% wastage =0.0011 cum
Quantity of timber =0.0222 cum cum 0.02 13954.80 309.80
labour: Carpenter class I each 0.39 300.00 117.00
Ordinary helper each 0.39 200.00 78.00
A 504.80
Water Charges and sundries 1.00% 5.05
Overheads 7.50% on 504.80 37.86
Contractors profit 8% on 504.80 37.86
C 585.57
Contract Tax 0% on C 0.00
Total 0.0222 cum 585.57
Rate for 1 cum Rs 26377.03
b) With timber available locally
Consider the size of frames (chowkat) of a door as 1m x 2m
Details of cost of door frames for .0222 cum quantity.
Materials:
Assuming the dimension of the timber used as 100mm x 40mm
2x2.1x0.1x0.04 = 0.0168 cum
1x1.075x0.10x0.04 = 0.0043 cum
Total (finished work) = 0.0211 cum
Add 5% wastage =0.0011 cum
Quantity of timber =0.0222 cum cum 0.02 9931.14 220.47
labour: Carpenter class I each 0.39 300.00 117.00
Ordinary helper each 0.39 200.00 78.00
A 415.47
Water Charges and sundries 1.00% 4.15
Overheads 7.50% on 415.47 31.16
Contractors profit 7.50% on 415.47 31.16
C 481.94
Contract Tax 0.00% on C 0.00
Total 0.0222 cum 481.94
Rate for 1 cum Rs 21709.01
Page 92
Providing/ fitting/ fixing of dressed local wood (tooni,
15.2
katus equivalent) in all types of frames complete.
a) With imported timber from outside the state.
Consider the size of frames (chowkat) of a door as 1m x 2m
Details of cost of door frames for .0222 cum quantity.
Materials:
Assuming the dimension of the timber used as 100mm x 40mm
2x2.1x0.1x0.04 =0.0168 cum
1x1.075x0.10x0.04=0.0043 cum
Total (finished work) =0.0211 cum
Add 5% wastage =0.0011 cum
Quantity of timber =0.0222 cum cum 0.02 13954.80 309.80
labour: Carpenter class I each 0.65 300.00 195.00
Ordinary helper each 0.65 200.00 130.00
A 634.80
Water Charges and sundries 1.00% 6.35
Overheads 7.50% on 634.80 47.61
Contractors profit 7.50% on 634.80 47.61
C 736.37
Contract Tax 0.00% on C 0.00
Total 736.37
Rate for 0.0222 cum 736.37
Page 93
Add 5% wastage =0.0011 cum
Quantity of timber =0.0222 cum cum 0.02 38559.32 856.02
labour: Carpenter class I each 0.39 300.00 117.00
Ordinary helper each 0.39 200.00 78.00
A 1051.02
Water Charges and sundries 1.00% 10.51
Overheads 7.50% on 1051.02 78.83
Contractors profit 7.50% on 1051.02 78.83
C 1219.19
Contract Tax 0.00% on C 0.00
Total 1219.19
Rate for 0.0222 cum 1219.19
Rate for 1 cum Rs 54918.47
Page 94
b) With timber available locally
Consider the size of frames (chowkat) of a door as 1m x 2m
Details of cost of door frames for .0222 cum quantity.
Materials:
Assuming the dimension of the timber used as 100mm x 40mm
2x2.1x0.1x0.04 =0.0168 cum
1x1.075x0.10x0.04=0.0043 cum
Total (finished work) =0.0211 cum
Add 5% wastage =0.0011 cum
Quantity of timber =0.0222 cum cum 0.02 29793.43 661.41
labour: Carpenter class I each 0.65 300.00 195.00
Ordinary helper each 0.65 200.00 130.00
A 986.41
Water Charges and sundries 1.00% 9.86
Overheads 7.50% on 986.41 73.98
Contractors profit 7.50% on 986.41 73.98
C 1144.23
Contract Tax 0.00% on C 0.00
Total 1144.23
Rate for 0.0222 cum 1144.23
Rate for 1 cum Rs 51541.89
Page 95
Painting battens (priming coat) 1x3.0x0.25 = 0.75 m2 sqm 0.75 61.78 46.34
Labour: Carpenter I each 0.35 300.00 105.00
Helper (ordinary labour) each 0.35 200.00 70.00
Wooden plank flooring. 1.00x0.038 = 0.0380 cum
15% making tongue and groop = 0.0057 cum
Wastage 10% = 0.0038 cum
Total = 0.0475 cum 13903.60 660.42
For making to shape & fixing Carpenter I each 0.15 300.00 45.00
Carpenter II each 1.20 275.00 330.00
Helper (ordinary labour) each 1.00 200.00 200.00
A 1629.16
Water Charges and sundries 1.00% 16.29
Overheads 7.50% on 1629.16 122.19
Contractors profit 7.50% on 1629.16 122.19
C 1889.83
Contract Tax 0.00% on C 0.00
Total 1889.83
Rate for one sqm Rs 1889.83
Page 96
Wooden plank flooring. 1.00x0.038 = 0.038 cum
15% making tongue and groop= 0.0057 cum
Wastage 10% = 0.0038 cum
Total = 0.0475 cum 29793.43 1415.19
For making to shape & fixing Carpenter I each 0.15 300.00 45.00
Carpenter II each 1.20 275.00 330.00
Helper (ordinary labour) each 1.00 200.00 200.00
A 2730.97
Water Charges and sundries 1.00% 27.31
Overheads 7.50% on 2730.97 204.82
Contractors profit 7.50% on 2730.97 204.82
C 3167.92
Contract Tax 0.00% on C 0.00
Total 3167.92
Rate for 1 sqm Rs 3167.92
CEILLING WORKS
Providing / Fitting / Fixing 6mm thick ply false ceiling
/paneling in wooden frames of timber panisaz or
15.7 equivalent, excluding the cost of polishing and
including cost of one coat priming on unexposed
frame all complete.
a) With imported timber frame work
Area = 3.25m x 3.25m = 10.56m2
Main batten 50mm x 75mm size
6 x 3.25 x 0.05 x 0.038 = 0.03705 cum
Intermediate batten 6 x 3.25 x 0.05 x 0.038 0.03705 cum
Add 10% wastage = 0.00741 cum
Total = 0.08151 cum 31214.69 2544.31
Painting of battens (priming coat)
2x6x3.25x0.126= sqm 4.91 61.78 303.34
For making to shape & fixing Carpenter - I each 0.40 300.00 120.00
Carpenter II each 1.00 275.00 275.00
Helper (ordinary labour) each 1.35 200.00 270.00
A 13865.56
Water Charges and sundries 1.00% 138.66
Overheads 7.50% on 13865.56 1039.92
Contractors profit 7.50% on 13865.56 1039.92
C 16084.06
Contract Tax 0.00% on C 0.00
Total for 10.56 sqm 16084.06
Rate for 1 sqm Rs 1523.11
b) Frame work with timber available locally
Area = 3.25m x 3.25m = 10.56m2
Main batten 50mm x 75mm size
6 x 3.25 x 0.05 x 0.038 = 0.03705 cum
Intermediate batten 6 x 3.25 x 0.05 x 0.038 0.03705 cum
Add 10% wastage = 0.00741 cum
Total = 0.08151 cum 23834.75 1942.77
Page 97
Painting of battens (priming coat)
2x6x3.25x0.126= sqm 4.91 61.78 303.34
A 8221.91
Water Charges and sundries 1.00% 82.22
Overheads 7.50% on 8221.91 616.64
Contractors profit 7.50% on 8221.91 616.64
C 9537.41
Contract Tax 0.00% on C 0.00
Total for 10.56 sqm 9537.41
Rate for 1 sqm Rs 903.16
Page 98
Painting battens (priming coat) 6x3.0x0.35= 6.3 sqm 61.78 389.21
Labour: Carpenter I each 0.65 300.00 195.00
Helper (ordinary labour) each 0.65 200.00 130.00
For making to shape & fixing Carpenter - I each 2.00 300.00 600.00
Carpenter II each 12.00 275.00 3300.00
Helper (ordinary labour) each 10.00 200.00 2000.00
A 19009.23
Water Charges and sundries 1.00% 190.09
Overheads 7.50% on 19009.23 1425.69
Contractors profit 7.50% on 19009.23 1425.69
C 22050.70
Contract Tax 0.00% on C 0.00
Total for 10.56 sqm 22050.70
Rate for 1 sqm 2088.13
Page 99
Main batten 50mm x 75mm size
6 x 3.25 x 0.05 x 0.038 = 0.03705 cum
Intermediate batten 6 x 3.25 x 0.05 x 0.038 0.03705 cum
Add 10% wastage = 0.00741 cum
Total = 0.08151 cum 13903.60 1133.28
Painting of battens (priming coat)
2x6x3.25x0.126= sqm 4.91 61.78 303.34
Labour: for making holes, repairing & fixing of plugs &
each 1.00 300.00 300.00
frames Carpenter I
Helper (ordinary labour) each 1.50 200.00 300.00
For making to shape & fixing Carpenter - I each 2.00 300.00 600.00
Carpenter II each 12.00 275.00 3300.00
Helper (ordinary labour) each 10.00 200.00 2000.00
A 8068.12
Water Charges and sundries 1.00% 80.68
Overheads 7.50% on 8068.12 605.11
Contractors profit 7.50% on 8068.12 605.11
C 9359.02
Contract Tax 0.00% on C 0.00
Total for 10.56 sqm 9359.02
Rate for 1 sqm Rs 886.27
Page 100
Contract Tax 0.00% on C 0.00
Total for 10.56 sqm 19916.77
Rate for 1 sqm Rs 1886.06
For making to shape & fixing Carpenter - I each 2.00 300.00 600.00
Carpenter II each 12.00 275.00 3300.00
Helper (ordinary labour) each 10.00 200.00 2000.00
A 11253.22
Water Charges and sundries 1.00% 112.53
Overheads 7.50% on 11253.22 843.99
Contractors profit 10.00% on 11253.22 1125.32
C 13335.06
Contract Tax 0.00% on C 0.00
Total for 10.56 sqm 13335.06
Rate for 1 sqm Rs 1262.79
Page 101
Wastage 5% = 0.0006 cum
= 0.013125 cum 29793.43 391.04
Labour: Carpenter I. each. 0.17 300.00 51.00
Carpenter II. each. 0.17 275.00 46.75
Other labour. each. 0.35 200.00 70.00
A 558.79
Water Charges and sundries 1.00% 5.59
Overheads 7.50% on 558.79 41.91
Contractors profit 7.50% on 558.79 41.91
C 648.20
Contract Tax 0.00% on C 0.00
Rate for 10 Rm Rs 648.20
Rate for 1 Rm Rs 64.82
A 2367.36
Water Charges and sundries 1.00% 23.67
Overheads 7.50% on 2367.36 177.55
Contractors profit 7.50% on 2367.36 177.55
C 2746.13
Contract Tax 0.00% on C 0.00
Total for 10 Rm 2746.13
Rate for 1 Rm Rs 274.61
Page 102
Providing / Fitting / Fixing Gypsum board ceilling
having composite thickness of 67mm consisting of
frames and double skin 8.5mm thick glass reinforced
gypsum (GRG) board manufactured by spray suction
technique with high strength plaster of paris confirming
to IS 8272 i/c providing and fixing frame works made
of special section power pressed MS sheet and
galvanised with Zinc coating of grade 175and
consisting of floor and ceiling channel 50mm wide
having equal flanges of 32mm width 0.50 m thick fixed
15.13
to floor/ceiling at spacing 610 mm centre to centre by
6mm dia. bolts and nuts to both ends of ceiling (hange
on truss)/ partition fixed on wall with rawl plugs) at the
spacing of 450mm c/c and fixing of GRG boards to
either frame work by 20mm long drive screws on
studs, floors, ceiling channel spacing of 300mm c/c i/c
jointing and finishing to a flush finish with recomendrd
joints filler, join paper tapesi/c two coats of primer
suitable for GRG board as per manufacture
specification all complete:
Page 103
Contract Tax 0.00% on C 0.00
Total for 10 sqm 16411.32
Rate for 1 sqm Rs 1641.13
Page 104
Rate for 1 sqm Rs 1323.56
Page 105
Butt hinges 100mm each 3.00 40.00 120.00
Screw each 24.00 0.80 19.20
Glass pane (4x0.80x0.4) 3mm thick. m2. 1.28 269.11 344.46
Labour. Carpenter I. each 1.50 300.00 450.00
Carpenter II. each 2.50 275.00 687.50
Other labour. each 2.50 200.00 500.00
A 4157.53
Water Charges and sundries 1.00% 41.58
Overheads 7.50% on 4157.53 311.81
Contractors profit 7.5% on 4157.53 311.81
C 4822.73
Contract Tax 0.0% on C 0.00
Cost for 2 sqm 2 4822.73
Rate for 1 sqm Rs 2411.37
Rates for various thickness of fully glazed shutters in
3mm glass panes.
a) 30mm 0.86 2411.37 Rs 2073.78
b) 32mm 0.91 2411.37 Rs 2204.68
c) 35mm 1.00 2411.37 Rs 2411.37
d) 40mm 1.14 2411.37 Rs 2755.85
e) 45mm 1.29 2411.37 Rs 3100.33
f) 50mm 1.43 2411.37 Rs 3444.81
Page 106
Rate for sqm Rs 2042.40
Page 107
e) 40mm 1.60 1416.85 Rs 2768.53
Imported Timber
Details of cost of single leaf shutter
2.00x0.76m
= 1.5200m2.
Battens = 10x2.00x0.076x0.03 = 0.0304m3.
Edges = 2x0.62x0.175x0.025 = 0.0054m3.
Braces= 1x1.65x0.125x0.025 = 0.0052m3.
= 0.0410m3.
Wastage 10% = 0.0411m3.
= 0.0451m3.
Cost of wood. cum 0.05 31214.69 1407.78
Carriage of wood. 4.50% 63.35
Hinges (Iron). each 3.00 48.00 144.00
Screw 40mm. each 16.00 1.00 16.00
Labour: Carpenter II. each 1.50 275.00 412.50
Helper. each 1.50 200.00 300.00
A 2343.63
Water Charges and sundries 1.00% 23.44
Overheads 7.50% on 2343.63 175.77
Contractors profit 7.50% 2343.63 175.77
on C 2718.61
Contract Tax 0% C 0.00
Cost for 1.52 on 2718.61
Rate for 1 sqm Rs 1788.56
Providing and fixing of 12mm thick and 100mm wide
pelmets with (25mm dia.) curtain' rods & brackets
16.7 including fixing with (25x3)mm M.S flat 10cm long and
plugs etc. complete in rani champ wood or equivalent
with necessary screws/nails. .
Consider a pelmet of 2m long
Details of cost 12mm thick pelmet 2 m long
Material: Wood 12mm thick,
Front. 1x1.7x0.10x0.012 = 0.00204 cum
Side. 2x0.25x0.10x0.012 = 0.00036 cum
Top. 1x1.7x0.15x0.012 = 0.00036 cum
= 0.00546 cum
Add for wastage = 0.00054 cum
= 0.0060 cum cum 0.01 31214.69 187.29
Curtain rod Rm 2.00 42.00 84.00
Labour: Carpenter I each 0.25 300.00 75.00
Helper each 0.30 200.00 60.00
A 406.29
Add for 2 No (25x3)mm x 10 cm M.S flats over
brackets, wooden plugs and cutting bricks & fixing in 5% on A 20.31
cement mortar 1:3 and cost of mortar.
Water Charges and sundries 1.00% 0.20
Overheads 7.50% on 426.60 32.00
Contractors profit 7.50% on 426.60 32.00
C 490.80
Contract Tax 0% on C 0.00
Cost for 2 Rm 490.80
Rate for 1 Rm Rs 245.40
Page 108
Providing fitting fixing Fibre Glass reinforced plastic
door frames of cross section 90 x 45 mm having single
rebate of 32 mm x 15 mm to receive shutter of 30 mm
thickness. . The laminate shall be moulded with fire
retardant grade unsaturated polyester resin and
16.8
chopped Mat. Doorframe laminate shall be 2 mm thick
and shall be fitted with suitable wooden blocks in all
the three legs. The frame shall be covered with fibre
glass from all sides. MS stay shall be provided at the
bottom to steady the frame.
Detail of cost of one door frame of 5 m
Factory made glass reinforced plastic door frame 90 x
m 5.00 439.55 2197.75
45 mm including carriage
Carpenter I each 0.15 300.00 45.00
Helper each 0.15 200.00 30.00
A 2272.75
Water Charges and sundries 1.00% 22.73
Overheads 7.50% on 2272.75 170.46
Contractors profit 7.50% on 2272.75 170.46
C 2636.40
Contract Tax 0% on C 0.00
Cost for 5 Rm 2636.40
Rate for 1 Rm Rs 527.28
Page 109
Providing fitting fixing Fibre Glass reinforced plastic
door frames of cross section 150 x 45 mm having
single rebate of 32 mm x 15 mm to receive shutter of
30 mm thickness. . The laminate shall be moulded
with fire retardant grade unsaturated polyester resin
16.10
and chopped Mat. Doorframe laminate shall be 2 mm
thick and shall be fitted with suitable wooden blocks in
all the three legs. The frame shall be covered with
fibre glass from all sides. MS stay shall be provided at
the bottom to steady the frame.
Detail of cost of one door frame of 5 m
Factory made glass reinforced plastic door frame 90 x
m 5.00 514.80 2574.00
45 mm including carriage
Carpenter I each 0.15 300.00 45.00
Helper each 0.15 200.00 30.00
A 2649.00
Water Charges and sundries 1.00% 26.49
Overheads 7.50% on 2649.00 198.68
Contractors profit 7.50% on 2649.00 198.68
C 3072.85
Contract Tax 0% on C 0.00
Cost for 5 Rm 3072.85
Rate for 1 Rm Rs 614.57
Page 110
Providing and fixing to existing door shutter 40 mm
thick Glass Fibre Reinforced Polyester (FRP) paneled
door shutter of required colour and approved brand
and manufacture, made with fire-retardant grade
unsaturated polyester resin, moulded to 3 mm thick
16.12 FRP laminate for forming hollow rails and styles, with
wooden blocks of seasoned wood inside at required
placed for fixing and fittings, cast monolitically with 5
mm thick FRP laminate for panels confirming to TADS
6: 1993 and / or IS 14856-2000 including fixing to
frames.
Detail of cost of one shutter 2.2 x 1.08 m = 2.38 sqm
Factory made 40 mm glass fibre reinforced plastic
sqm 2.38 2691.07 6404.75
panel door shutter including carriage
Powder coated MS butt hinges 100mm x 58 mm x
10 nos. 4.00 48.00 19.20
1.9mm
Ms screw 40 mm 100 Nos. 48.00 55.00 26.40
Ms screw 20 mm Nos. 8.00 1.20 9.60
Carpenter I each 0.40 300.00 120.00
Helper each 0.40 200.00 80.00
A 6659.95
Water Charges and sundries 1.00% 66.60
Overheads 7.50% on 6659.95 499.50
Contractors profit 7.50% on 6659.95 499.50
C 7725.55
Contract Tax 0% on C 0.00
Cost for 2.38 sqm 7725.55
Rate for 1 sqm Rs 3246.03
Page 111
Rate for 1 sqm Rs 2770.01
Page 112
Water Charges and sundries 1.00% 98.31
Overheads 7.50% on 9830.62 737.30
Contractors profit 7.50% on 9830.62 737.30
C 11403.53
Contract Tax 0% on C 0.00
Cost for 2.38 sqm 11403.53
Rate for 1 sqm Rs 4791.40
Page 113
Carpenter I each 0.15 300.00 45.00
Helper each 0.15 200.00 30.00
A 2550.00
Water Charges and sundries 1.00% 25.50
Overheads 7.50% on 2550.00 191.25
Contractors profit 7.50% on 2550.00 191.25
C 2958.00
Contract Tax 0% on C 0.00
Cost for 5 Rm 2958.00
Rate for 1 Rm Rs 591.60
Page 114
Providing fitting fixing Fibre Glass reinforced polyester
(FRP) Window frames of cross section 150 x 45 mm
having double rebate of 32 mm x 15 mm to receive
shutter of 30 mm thickness. . The laminate shall be
16.21
moulded with fire retardant grade unsaturated
polyester resin and chopped Mat. Doorframe laminate
shall be 2 mm thick and shall be fitted with suitable
wooden blocks.
Detail of cost of one door frame of 5 m
Factory made glass reinforced polyester (FRP)
windows frame 150 x 45 mm including carriage m 5.00 808.50 4042.50
(double rebate)
Carpenter I each 0.15 300.00 45.00
Helper each 0.15 200.00 30.00
A 4117.50
Water Charges and sundries 1.00% 41.18
Overheads 7.50% on 4117.50 308.81
Contractors profit 7.50% on 4117.50 308.81
C 4776.30
Contract Tax 0% on C 0.00
Cost for 5 Rm 4776.30
Rate for 1 Rm Rs 955.26
Page 115
Contractor's profit. 7.50% on 550.00 41.25
C 638.00
Contract Tax 0.00% on C 0.00
For 10 Nos 638.00
For 1 No Rs 63.80
Page 116
Contract Tax 0.00% on C 0.00
For one m Rs 168.21
c) M.S (Oxidized)
Materials. Sliding bolt each 10.00 94.00 940.00
Screws. each 40.00 1.00 40.00
Bolts & nuts. each 60.00 1.25 75.00
Labour. Carpenter I each 0.40 300.00 120.00
Helper. each 0.40 200.00 80.00
Total A 1255.00
Water Charges and sundries 1.00% 12.55
Overheads 7.50% on 1255.00 94.13
Contractor's profit. 7.50% on 1255.00 94.13
Page 117
C 1455.81
Contract Tax 0.00% on C 0.00
For 10 Nos Rs 1455.81
For one No Rs 145.58
f) Aluminum Oxidized
Materials. Sliding bolt each 10.00 280.00 2800.00
Screws. each 40.00 0.75 30.00
Labour. Carpenter I each 0.40 300.00 120.00
Helper. each 0.40 200.00 80.00
Total A 3030.00
Water Charges and sundries 1.00% 30.30
Overheads 7.50% on 3030.00 227.25
Contractor's profit. 7.50% on 3030.00 227.25
C 3514.80
Contract Tax 0.00% on C 0.00
For 10 Nos 3514.80
For one No Rs 351.48
Page 118
For one No Rs 210.54
b) Ms (Bright Finish)
Materials. Sliding bolt each 10.00 196.00 1960.00
Screws. each 40.00 1.00 40.00
Bolts & nuts. each 60.00 1.25 75.00
Labour. Carpenter I each 0.40 300.00 120.00
Helper. each 0.40 200.00 80.00
Total A 2275.00
Water Charges and sundries 1.00% 22.75
Overheads 7.50% on 2275.00 170.63
Contractor's profit. 7.50% on 2275.00 170.63
C 2639.01
Contract Tax 0.00% on C 0.00
For 10 Nos 2639.01
For one No Rs 263.90
d) M.S (Oxidized)
Materials. Sliding bolt each 10.00 50.00 500.00
Screws. each 40.00 1.00 40.00
Bolts & nuts. each 60.00 1.25 75.00
Labour. Carpenter I each 0.40 300.00 120.00
Helper. each 0.40 200.00 80.00
Total A 815.00
Water Charges and sundries 1.00% 8.15
Overheads 7.50% on 815.00 61.13
Contractor's profit. 7.50% on 815.00 61.13
C 945.41
Contract Tax 0.00% on C 0.00
For 10 Nos 945.41
For one No Rs 94.54
Page 119
f) Brass (Chromium Plated)
Materials. Sliding bolt each 10.00 780.00 7800.00
Screws. each 40.00 1.25 50.00
Labour. Carpenter I each 0.40 300.00 120.00
Helper. each 0.40 200.00 80.00
Total A 8050.00
Water Charges and sundries 1.00% 80.50
Overheads 7.50% on 8050.00 603.75
Contractor's profit. 7.50% on 8050.00 603.75
C 9338.00
Contract Tax 0.00% on C 0.00
For 10 Nos 9338.00
For one No Rs 933.80
g) Aluminum Oxidized
Materials. Sliding bolt each 10.00 240.00 2400.00
Screws. each 40.00 0.75 30.00
Labour. Carpenter I each 0.40 300.00 120.00
Helper. each 0.40 200.00 80.00
Total A 2630.00
Water Charges and sundries 1.00% 26.30
Overheads 7.50% on 2630.00 197.25
Contractor's profit. 7.50% on 2630.00 197.25
C 3050.80
Contract Tax 0.00% on C 0.00
For 10 Nos 3050.80
For one No Rs 305.08
Page 120
c) Brass (copper oxidized)
Materials: Tower bolts. = Rs.24.00 each 10.00 350.00 3500.00
Screws 25mm. each 100.00 1.50 150.00
Labour:- Carpenter I. each 0.30 300.00 90.00
Helper. each 0.30 200.00 60.00
Total A 3800.00
Water Charges and sundries 1.00% 38.00
Overheads 7.50% on 3800.00 285.00
Contractor's profit. 7.50% on 3800.00 285.00
C 4408.00
Contract Tax 0.00% on C 0.00
For 10 Nos 4408.00
For one No Rs 440.80
e) Aluminum
Materials: Tower bolts. each 10.00 94.00 940.00
Screws 25mm. each 100.00 0.75 75.00
Labour:- Carpenter I. each 0.30 300.00 90.00
Helper. each 0.30 200.00 60.00
Total A 1165.00
Water Charges and sundries 1.00% 11.65
Overheads 7.50% on 1165.00 87.38
Contractor's profit. 7.50% on 1165.00 87.38
C 1351.41
Contract Tax 0.00% on C 0.00
For 10 Nos 1351.41
For one No Rs 135.14
Page 121
Material. Cost of T. bolt each 10.00 325.00 3250.00
Screw. each 100.00 1.50 150.00
Labour. Carpenter I. each 0.30 300.00 90.00
Helper. each 0.30 200.00 60.00
Total A 3550.00
Water Charges and sundries 1.00% 35.50
Overheads 7.50% on 3550.00 266.25
Contractor's profit. 7.50% on 3550.00 266.25
C 4118.00
Contract Tax 0.00% on C 0.00
For 10 Nos 4118.00
For one No Rs 411.80
e) Aluminum
Material. Cost of T. bolt each 10.00 70.00 700.00
Screw. each 100.00 0.75 75.00
Labour. Carpenter I. each 0.30 300.00 90.00
Helper. each 0.30 200.00 60.00
Total A 925.00
Water Charges and sundries 1.00% 9.25
Overheads 7.50% on 925.00 69.38
Contractor's profit. 7.50% on 925.00 69.38
C 1073.01
Contract Tax 0.00% on C 0.00
For 10 Nos 1073.01
For one No Rs 107.30
Page 122
Screw. each 100.00 0.80 80.00
Labour. Carpenter I. each 0.30 300.00 90.00
Helper. each 0.30 200.00 60.00
Total A 550.00
Water Charges and sundries 1.00% 5.50
Overheads 7.50% on 550.00 41.25
Contractor's profit. 7.50% on 550.00 41.25
C 638.00
Contract Tax 0.00% on C 0.00
For 10 Nos 638.00
For one No Rs 63.80
e) Aluminum
Material. Cost of T. bolt each 10.00 63.00 630.00
Screw. each 100.00 0.75 75.00
Labour. Carpenter I. each 0.30 300.00 90.00
Helper. each 0.30 200.00 60.00
Total A 855.00
Page 123
Water Charges and sundries 1.00% 8.55
Overheads 7.50% on 855.00 64.13
Contractor's profit. 7.50% on 855.00 64.13
C 991.81
Contract Tax 0.00% on C 0.00
For 10 Nos 991.81
For one No Rs 99.18
Page 124
Overheads 7.50% on 2900.00 217.50
Contractor's profit. 7.50% on 2900.00 217.50
C 3364.00
Contract Tax 0.00% on C 0.00
For 10 Nos 3364.00
For one No Rs 336.40
e) Aluminum
Material. Cost of T. bolt each 10.00 48.00 480.00
Screw. each 100.00 0.75 75.00
Labour. Carpenter I. each 0.30 300.00 90.00
Helper. each 0.30 200.00 60.00
Total A 705.00
Water Charges and sundries 1.00% 7.05
Overheads 7.50% on 705.00 52.88
Contractor's profit. 7.50% on 705.00 52.88
C 817.81
Contract Tax 0.00% on C 0.00
For 10 Nos 817.81
For one No Rs 81.78
Page 125
Contractor's profit. 7.50% on 1100.00 82.50
C 1276.00
Contract Tax 0.00% on C 0.00
For 10 Nos 1276.00
For one No Rs 127.60
e) Aluminum
Material. Cost of T. bolt each 10.00 32.00 320.00
Screw. each 100.00 0.75 75.00
Labour. Carpenter I. each 0.30 300.00 90.00
Helper. each 0.30 200.00 60.00
Total A 545.00
Water Charges and sundries 1.00% 5.45
Overheads 7.50% on 545.00 40.88
Contractor's profit. 7.50% on 545.00 40.88
C 632.21
Contract Tax 0.00% on C 0.00
For 10 Nos 632.21
For one No Rs 63.22
b) M.S
Material. Cost of Materials each 10.00 15.00 150.00
Screw. each 100.00 0.80 80.00
Labour. Carpenter I. each 0.30 300.00 90.00
Helper. each 0.30 200.00 60.00
Total A 380.00
Water Charges and sundries 1.00% 3.80
Overheads 7.50% on 380.00 28.50
Contractor's profit. 7.50% on 380.00 28.50
Page 126
C 440.80
Contract Tax 0.00% on C 0.00
For 10 Nos 440.80
For one No Rs 44.08
b) M.S
Material. Cost of Materials each 10.00 15.00 150.00
Screw. each 100.00 1.00 100.00
Labour. Carpenter I. each 0.30 300.00 90.00
Helper. each 0.30 200.00 60.00
Total A 400.00
Water Charges and sundries 1.00% 4.00
Overheads 7.50% on 400.00 30.00
Contractor's profit. 7.50% on 400.00 30.00
C 464.00
Page 127
Contract Tax 0.00% on C 0.00
For 10 Nos 464.00
For one No Rs 46.40
b) M.S
Material. Cost of Materials each 10.00 15.00 150.00
Screw. each 100.00 1.00 100.00
Labour. Carpenter I. each 0.30 300.00 90.00
Helper. each 0.30 200.00 60.00
Total A 400.00
Water Charges and sundries 1.00% 4.00
Overheads 7.50% on 400.00 30.00
Contractor's profit. 7.50% on 400.00 30.00
C 464.00
Contract Tax 0.00% on C 0.00
Page 128
For 10 Nos 464.00
For one No Rs 46.40
Page 129
Contractor's profit. 7.50% on 1212.50 90.94
C 1406.51
Contract Tax 0.00% on C 0.00
For one No Rs 1406.51
b) Brass (C.O)
Material Mortise lock set 1.00 1062.50 1062.50
Labour. Carpenter I. each. 0.30 300.00 90.00
Helper. each. 0.30 200.00 60.00
Total A 1212.50
Water Charges and sundries 1.00% 12.13
Overheads 7.50% on 1212.50 90.94
Contractor's profit. 7.50% on 1212.50 90.94
C 1406.51
Contract Tax 0.00% on C 0.00
For one No Rs 1406.51
c) Brass (C.P)
Material Mortise lock set 1.00 1187.50 1187.50
Labour. Carpenter I. each. 0.30 300.00 90.00
Helper. each. 0.30 200.00 60.00
Total A 1337.50
Water Charges and sundries 1.00% 13.38
Overheads 7.50% on 1337.50 100.31
Contractor's profit. 7.50% on 1337.50 100.31
C 1551.50
Contract Tax 0.00% on C 0.00
For one No Rs 1551.50
d) M.S
Material Mortise lock set 1.00 375.00 375.00
Labour. Carpenter I. each. 0.30 300.00 90.00
Helper. each. 0.30 200.00 60.00
Total A 525.00
Water Charges and sundries 1.00% 5.25
Overheads 7.50% on 525.00 39.38
Contractor's profit. 7.50% on 525.00 39.38
C 609.01
Contract Tax 0.00% on C 0.00
For one No Rs 609.01
b) Brass (C.O)
Material Mortise lock set 1.00 1062.50 1062.50
Labour. Carpenter I. each. 0.30 300.00 90.00
Page 130
Helper. each. 0.30 200.00 60.00
Total A 1212.50
Water Charges and sundries 1.00% 12.13
Overheads 7.50% on 1212.50 90.94
Contractor's profit. 7.50% on 1212.50 90.94
C 1406.51
Contract Tax 0.00% on C 0.00
For one No Rs 1406.51
c) Brass (C.P)
Material Mortise lock set 1.00 1187.50 1187.50
Labour. Carpenter I. each. 0.30 300.00 90.00
Helper. each. 0.30 200.00 60.00
Total A 1337.50
Water Charges and sundries 1.00% 13.38
Overheads 7.50% on 1337.50 100.31
Contractor's profit. 7.50% on 1337.50 100.31
C 1551.50
Contract Tax 0.00% on C 0.00
For one No Rs 1551.50
d) M.S
Material Mortise lock set 1.00 343.75 343.75
Labour. Carpenter I. each. 0.30 95.00 28.50
Helper. each. 0.30 85.00 25.50
Total A 397.75
Water Charges and sundries 1.00% 3.98
Overheads 7.50% on 397.75 29.83
Contractor's profit. 7.50% on 397.75 29.83
C 461.39
Contract Tax 0.00% on C 0.00
For one No Rs 461.39
Providing and Fixing Hydraulic door closer with
17.16
accessories and screws complete.
Material:- Door closer each 1.00 800.00 800.00
screw each 20.00 1.50 30.00
Labour Carpenter I each 1.00 95.00 95.00
Helper. each 1.00 85.00 85.00
Total A 1010.00
Water Charges and sundries 1.00% 10.10
Overheads 7.50% on 1010.00 75.75
Contractor's profit. 7.50% on 1010.00 75.75
C 1171.60
Contract Tax 0.00% on C 0.00
For one No Rs 1171.60
Providing and fixing spring hinges double action with
17.17
necessary screws of 100mm size of M.S all complete.
Details of cost for ten (10Nos). Spring Hinges. each. 10.00 153.00 1530.00
Screws. each. 100.00 1.50 150.00
Labour. Carpenter I. each. 0.40 95.00 38.00
Helper. each. 0.40 85.00 34.00
Total A 1752.00
Water Charges and sundries 1.00% 17.52
Overheads 7.50% on 1752.00 131.40
Contractor's profit. 7.50% on 1752.00 131.40
C 2032.32
Contract Tax 0.00% on C 0.00
For 10 no 2032.32
For 1 nos Rs 203.23
Page 131
18 Supplying/Bending, Binding of steel
Supplying, bending and placing in position mild steel
(6mm dia.) including straitening, cutting, bending and
18.1
placing in position I/c cost of binding wire, all
complete.
Details of cost of 1 qtl.
Materials: Steel bars 1.00 qtl.
Add wastage 0.05 qtl.
Total. 1.05 qtl. qtl. 1.05 5040.00 5292.00
Binding wire Kgs 5.00 70.00 350.00
Labour Masson - I each 0.04 300.00 12.00
Masson III each 0.50 250.00 125.00
Helper. each 0.50 200.00 100.00
A 5879.00
Water Charges and sundries 1.00% 58.79
Overheads 7.50% on 5879.00 440.93
Contractors profit 7.5% on 5879.00 440.93
C 6819.65
Contract Tax 0% on C 0.00
Total 6819.65
Rate for 1 qtl. Rs 6819.65
Page 132
30 x 0.80 = 24.00 m
Less overlap = 3.92 m
Net length = 20.09 m
Breadth of sheet
GCI sheet = 2.50 m
= 2.80 m
Total length = 5.30 m
Less overlap = 0.20 m
Net length = 5.10 m
Material:
G.C.I Sheets having 375 gram of Zinc coating per
sqm.
GCI sheets (2.50 x0.80 CGS) 30 Nos. on each side.
Kg/Per
Weight @ 5.32kg/m2. i.e.5.32 x 2 .5 x 0.90 = 11.97
sheet
No. of sheet = 2 x 30 = 60 Nos. Weight = 718.20 Kgs (S1)
CGS Sheet 2.80 x 0.90m.
Weight @5.32kg/m2. = 13.41kg per sheet.
Weight of 60 sheets = 804.38 Kgs (S2)
Total ( S1 + S2) 1522.58 Kgs
Add wastage @ 5% = 76.13 Kgs
Total = 1598.71 Kgs
Cost of GCI sheets. MT 1.60 79967.40 127947.84
(Considering 5 purlin to be used on either side)
G.I.J. or L hooks 8mm dia No.2 x 5 x 30 x 3 Nos =
810 Nos
Cost of hooks. Each 900.00 8.00 7200.00
Limpet washers 986+900. 100 9.00 75.00 675.00
Bitumen washers 986+900. 100 9.00 15.00 135.00
Chromate yellow primer Liters 2.82 123.00 346.86
Ready made paints Liters 4.18 166.00 693.88
Labour: Carpenter I. each. 3.00 300.00 900.00
Carpenter II. each. 9.00 275.00 2475.00
Other labour. each. 27.00 200.00 5400.00
Painter II each. 2.50 275.00 687.50
Other labour. each. 5.00 200.00 1000.00
A 147461.08
Water Charges and sundries 1.00% 1474.61
Overheads 7.50% on 147461.08 11059.58
Contractors profit 7.5% on 147461.08 11059.58
C 171054.85
Contract Tax 0.0% on C 0.00
Total 171054.85
Cost for 200.43 sqm 171054.85
Cost of 1 sqm. Rs 853.44
Page 133
= 5 x 0.050 = 0.25 M
Total lap length = 29 x 0.025 = 7.25 M
Total length of sheet = 30 x 0.80 = 24.00 M
Less lap length = 7.25 M
Net length = 16.75 M
Breadth : for 5.1m net.
GCI sheet 1 No. of 2.50 m.
GCI sheet 1 No. of 2.80 m.
5.30 m.
Deduct lap. 0.20 m.
Net width. 5.10 m.
Material:
G.C.I Sheets.
Kg/Per
Weight @5.32kg/m2.i.e.5.4 x 2 .5 x 0.90 = 11.97
sheet
No. of sheet = 2 x 30 = 60 Nos. Weight = 718.2 Kgs (S1)
CGS Sheet 2.80 x 0.90m.
Weight @5.4kg/m2. = 13.61kg per sheet.
Weight of 60 sheets = 804.38 Kgs (S2)
Total ( S1 + S2) 1522.58 Kgs
Add wastage @ 5% = 76.13 Kgs
Total = 1598.71 Kgs
Cost of GCI sheets. MT 1.60 79585.23 127336.37
(Considering 5 purlin to be used on either side)
G.I.J. or L hooks 8mm dia No.2 x 5 x 30 x 3 Nos
= 810 Nos
G.I.J. or L hooks 8mm dia No.2 x 5 x 30 x 3 Nos
= 810 Nos
Cost of hooks. Each 900.00 8.00 7200.00
Limpet washers 986+900. 100 9.00 75.00 675.00
Bitumen washers 986+900. 100 9.00 15.00 135.00
Chromate yellow primer Liters 2.82 123.00 346.86
Ready made paints Liters 4.18 166.00 693.88
Labour: Carpenter I. each. 3.00 300.00 900.00
Carpenter II. each. 9.00 275.00 2475.00
Other labour. each. 27.00 200.00 5400.00
Painter II each. 2.50 275.00 687.50
Other labour. each. 5.00 200.00 1000.00
A 146849.61
Water Charges and sundries 1.00% on 146849.61 1468.50
Overheads 7.50% on 146849.61 11013.72
Contractors profit 7.50% 146849.61 11013.72
C 170345.55
Contract Tax 0.00% C 0.00
Total on C 170345.55
Cost for 170.85 sqm 170345.55
Cost of 1 sqm. Rs 997.05
Page 134
Net length of piece = 0.70m.
Net length from one sheet = 3x 0.70 = 2.10m.
No. of sheets for 10.35/2.10 = 4.92 sheets
say 5 sheet
Weight @5.4kg/m2. = 5 x 5.40 x 1.80 x 0.9
MT 0.04 79585.23 3481.06
= 43.74 kg.
G.I. seam bolts & nuts. 25x6mm -
2 in each point.
No. of joints = 15-1 = 14
No. of nuts and bolts 2x14 = 28
Cost of nuts and bolts. ten 2.80 60.00 168.00
G.I. plain washer. 100 0.28 75.00 21.00
Bitumen washer. 100 0.56 15.00 8.40
Chromate yellow primer Liters 0.50 123.00 61.50
Ready made paints Liters 0.35 166.00 58.10
Labour: Carpenter I/ Foreman each. 0.15 300.00 45.00
Carpenter II / Fitter each. 0.75 275.00 206.25
Other labour. each. 1.50 200.00 300.00
Painter each. 0.25 275.00 68.75
Total A 4418.06
Water Charges and sundries 1.00% on 4418.06 44.18
Overheads 7.50% on 4418.06 331.35
Contractors profit 7.50% 4418.06 331.35
C 5124.94
Contract Tax 0.00% C 0.00
Cost for 10.35 Rm 5124.94
Cost of 1m Rs 495.16
Page 135
Cost for 9.70 Rm 5062.08
Cost of 1m Rs 521.86
Page 136
Total 4356.01
Cost for 10.55 Rm 4356.01
Cost of 1m Rs 412.89
Page 137
Kg/Per
Weight @5.4kg/m2.i.e.5.4 x 2 .5 x 0.90 = 12.15
sheet
No. of sheet = 2 x 30 = 60 Nos. Weight = 729.00 Kgs (S1)
GCI Sheet 2.80 x 0.90m.
Weight @5.4kg/m2. = 13.61kg per sheet.
Weight of 60 sheets = 816.60 Kgs (S2)
Total ( S1 + S2) 1546.00 Kgs
Add wastage @ 5% = 77.3 Kgs
Total = 1623.30 Kgs
Cost of Hullas sheets. MT 1.62 83743.43 135664.35
GI seam bolts, nuts, c/c spanning 60cm zigzag or c/c
spanning straight 30cm.
No. of bolts in one lap = 5.10 / 0.3 = 17 Nos.
Total No. of bolts 2 x 29 x 17 = 986 Nos.
Cost of bolts. Each 986.00 6.00 5916.00
(Considering 5 purlin to be used on either side)
G.I.J. or L hooks 8mm dia No.2 x 5 x 30 x 3 Nos= 810
Nos
Cost of hooks. Each 900.00 12.00 10800.00
Limpet washers 986+900. 100 18.86 75.00 1414.50
Bitumen washers 986+900. 100 18.86 15.00 282.90
Labour: Carpenter I. each. 3.00 300.00 900.00
Carpenter II. each. 9.00 275.00 2475.00
Other labour. each. 27.00 200.00 5400.00
A 162852.75
Water Charges and sundries 1.00% on 162852.75 1628.53
Overheads 7.50% on 162852.75 12213.96
Contractors profit 7.50% on 162852.75 12213.96
C 188909.20
Contract Tax 0.00% on C 0.00
Total 188909.20
Cost for 200.43 sqm 188909.20
Cost of 1 sqm. Rs 942.52
Weight @5.4kg/m2. = 5 x 5.40 x 1.80 x 0.9 = 43.74 kg. MT 0.04 83743.43 3662.94
G.I. seam bolts & nuts. 25x6mm - 2 in each point.
No. of joints = 15-1 = 14
No. of nuts and bolts 2x14 = 28
Cost of nuts and bolts. ten 28.00 6.00 168.00
G.I. plain washer. 100 2.80 75.00 210.00
Bitumen washer. 100 0.56 15.00 8.40
Labour: Carpenter I/ Foreman each. 0.50 300.00 150.00
Carpenter II / Fitter each. 1.00 275.00 275.00
Other labour. each. 1.50 200.00 300.00
Total A 4774.34
Page 138
Water Charges and sundries 1.00% on 4774.34 47.74
Overheads 7.50% on 4774.34 358.08
Contractors profit 7.50% 4774.34 358.08
C 5538.24
Contract Tax 0.00% C 0.00
Cost for 10.35 Rm 5538.24
Cost of 1m Rs 535.10
Page 139
Other labour. each 1.00 200.00 200.00
Total A 4639.05
Water Charges and sundries 1.00% on 4639.05 46.39
Overheads 7.50% on 4639.05 347.93
Contractors profit 7.50% 4639.05 347.93
C 5381.30
Contract Tax 0.00% C 0.00
Total Rs 5381.30
Cost for 12.7 Rm 5381.30
Cost of 1m Rs 423.72
Page 140
Carpenter II each. 1.25 275.00 343.75
Ordinary labour. each. 1.25 200.00 250.00
A 4195.58
Water Charges and sundries 1.00% on 4195.58 41.96
Overheads 7.50% on 4195.58 314.67
Contractors profit 7.50% 4195.58 314.67
C 4866.88
Contract Tax 0.00% C 0.00
Cost for 9 Rm Rs 4866.88
Cost of 1m Rs 540.76
Page 141
Ready made paints Liters 4.18 166.00 693.88
Labour: Carpenter I. each. 3.00 300.00 900.00
Carpenter II. each. 9.00 275.00 2475.00
Other labour. each. 27.00 200.00 5400.00
Painter II each. 2.50 275.00 687.50
Other labour. each. 5.00 200.00 1000.00
A 153894.08
Water Charges and sundries 1.00% on 153894.08 1538.94
Overheads 7.50% on 153894.08 11542.06
Contractors profit 7.50% on 153894.08 11542.06
C 178517.14
Contract Tax 0.00% on C 0.00
Total 178517.14
Cost for 200.43 sqm 178517.14
Cost of 1 sqm. Rs 890.67
Page 142
Bitumen washers 986+900. 100 9.00 15.00 135.00
Chromate yellow primer Liters 2.82 123.00 346.86
Ready made paints Liters 4.18 166.00 693.88
Epoxy Kg 11.65 340.00 3961.00
Terpin Tel Ltr 10.00 55.00 550.00
Labour: Carpenter I. each. 3.00 300.00 900.00
Carpenter II. each. 9.00 275.00 2475.00
Other labour. each. 27.00 200.00 5400.00
Painter II each. 2.50 275.00 687.50
Other labour. each. 5.00 200.00 1000.00
A 154960.61
Water Charges and sundries 1.00% on 154960.61 1549.61
Overheads 7.50% on 154960.61 11622.05
Contractors profit 7.50% 154960.61 11622.05
C 179754.32
Contract Tax 0.00% C 0.00
Total on C 179754.32
Cost for 170.85 sqm 179754.32
Cost of 1 sqm. Rs 1052.12
Weight @5.4kg/m2. = 5 x 5.40 x 1.80 x 0.9 = 43.74 kg. MT 0.04 79585.23 3481.06
G.I. seam bolts & nuts. 25x6mm - 2 in each point.
No. of joints = 15-1 = 14
No. of nuts and bolts 2x14 = 28
Cost of nuts and bolts. ten 2.80 60.00 168.00
G.I. plain washer. 100 0.28 75.00 21.00
Bitumen washer. 100 0.56 15.00 8.40
Chromate yellow primer Liters 0.50 123.00 61.50
Ready made paints Liters 0.35 166.00 58.10
Epoxy Kg 0.22 340.00 76.16
Terpin Tel Ltr 0.22 55.00 12.10
Labour: Carpenter I/ Foreman each. 0.15 300.00 45.00
Carpenter II / Fitter each. 0.75 275.00 206.25
Other labour. each. 1.50 200.00 300.00
Painter each. 0.25 275.00 68.75
Total A 4506.32
Water Charges and sundries 1.00% on 4506.32 45.06
Overheads 7.50% on 4506.32 337.97
Contractors profit 7.50% 4506.32 337.97
C 5227.32
Contract Tax 0.00% C 0.00
Cost for 10.35 Rm 5227.32
Cost of 1m Rs 505.06
Page 143
Providing fitting & fixing 16mm thick valley of 90cm
overall width in plain G.S. sheet class I fixed with GI J
19.17 or L hooks, bolts and nuts 8mm dia filed with epoxy
ineach bolts ,GI limpet and bitumen washers
complete.
Details of cost valley with 0.63mm thick plain GS sheet
for 8.325sqm
consider the 0.63mm thick plain GS sheet of 9.25m
length= 8.325 sqm
Materials:
4 Nos. sheets of 2.50x0.90m. width used.
Length= 2.5x 4 = 10.00m.
Overlaps 3 x 0.25 = 0.30m.
Net length = 9.70m.
Weight 4x2.50x0.90x5.32= 47.88Kgs
Cost of sheets. MT 0.04 79585.23 3564.46
G.I. bolts and Nuts 25x6mm @4 bolts in each joint.
Cost of bolt and nuts. 10 1.20 60.00 72.00
G.I. plain washer. 100 0.12 75.00 9.00
Bitumen washer. 100 0.12 15.00 1.80
Chromate yellow primer Liters 0.30 123.00 36.90
Ready made paints Liters 0.45 166.00 74.70
Epoxy Kg 0.10 340.00 32.64
Terpin Tel Ltr 0.10 55.00 5.50
Labour: Carpenter I each. 0.10 300.00 30.00
Carpenter II each. 0.75 275.00 206.25
Other labour. each. 1.50 200.00 300.00
Painter each. 0.25 275.00 68.75
Total A 4402.00
Water Charges and sundries 1.00% on 4402.00 44.02
Overheads 7.50% on 4402.00 330.15
Contractors profit 7.50% 4402.00 330.15
C 5106.32
Contract Tax 0.00% C 0.00
Cost for 9.70 Rm 5106.32
Cost of 1 m Rs 526.42
Page 144
Total A 4609.00
Water Charges and sundries 1.00% on 4609.00 46.09
Overheads 7.50% on 4609.00 345.68
Contractors profit 7.50% 4609.00 345.68
C 5346.45
Contract Tax 0.00% C 0.00
Total 5346.45
Cost for 12.7 Rm 5346.45
Cost of 1 m Rs 420.98
Providing, fitting, fixing of 24 BWG prepainted
(HULLAS) sheet roofing with G.I. hooks, bolts and nut
8mm dia with bitumen, GI limpet washers filled with
19.19
epoxy in each bolts including coat of approved steel
primer and two coats of approved paint, on
overlapping of sheets excluding carriage complete.
Details of cost for area of a roof with each slopping
side 19.65 x 5.10m for 24 BWG.
Area covered = 2 x 19.65 x 5.10 = 200.43 sqm
Details of length & breadth. Length ( for 19.65 m net )
30 sheets will be required.
No. of laps = 24.0 / 0.80 = 30 No - 1 = 29 Nos
One lap length = two corrugations of 75mm
= 2 x 0.075 = 0.15 M
Total lap length = 29 x 0.15 = 4.35 M
Total length of sheet = 30 x 0.80 = 24.00 M
Less lap length = 4.35 M
Net length = 19.65 M
Breadth : for 5.1m net.
GCI sheet 1 No. of 2.50 m.
GCI sheet 1 No. of 2.80 m.
5.30 m.
Deduct lap. 0.20 m.
Net width. 5.10 m.
Material:
G.C.I Sheets.
GCI sheets (2.50 x0.80 CGS) 30 Nos. on each side.
Kg/Per
Weight @5.4kg/m2.i.e.5.4 x 2 .5 x 0.90 = 12.15
sheet
No. of sheet = 2 x 30 = 60 Nos. Weight = 729.00 Kgs (S1)
CGS Sheet 2.80 x 0.90m.
Weight @5.4kg/m2. = 13.61kg per sheet.
Weight of 60 sheets = 816.60 Kgs (S2)
Total ( S1 + S2) 1546.00 Kgs
Add wastage @ 5% = 77.3 Kgs
Total = 1623.30 Kgs
Cost of Hullas sheets. MT 1.62 83743.43 135664.35
GI seam bolts, nuts, c/c spanning 60cm zigzag or c/c
spanning straight 30cm.
No. of bolts in one lap = 5.10 / 0.3 = 17 Nos.
Total No. of bolts 2 x 29 x 17 = 986 Nos.
Cost of bolts. Each 986.00 6.00 5916.00
(Considering 5 purlin to be used on either side)
G.I.J. or L hooks 8mm dia No.2 x 5 x 30 x 3 Nos
= 810 Nos
Cost of hooks. Each 900.00 12.00 10800.00
Limpet washers 986+900. 100 18.86 75.00 1414.50
Bitumen washers 986+900. 100 18.86 15.00 282.90
Epoxy Kg 7.20 340.00 2448.00
Terpin Tel Ltr 7.00 55.00 385.00
Page 145
Labour: Carpenter I. each. 3.00 300.00 900.00
Carpenter II. each. 9.00 275.00 2475.00
Other labour. each. 27.00 200.00 5400.00
A 165685.75
Water Charges and sundries 1.00% on 165685.75 1656.86
Overheads 7.50% on 165685.75 12426.43
Contractors profit 7.50% on 165685.75 12426.43
C 192195.47
Contract Tax 0.00% on C 0.00
Total 192195.47
Cost for 200.43 sqm 192195.47
Cost of 1 sqm. Rs 958.92
Weight @5.4kg/m2. = 5 x 5.40 x 1.80 x 0.9 = 43.74 kg. MT 0.04 83743.43 3662.94
G.I. seam bolts & nuts. 25x6mm - 2 in each point.
No. of joints = 15-1 = 14
No. of nuts and bolts 2x14 = 28
Cost of nuts and bolts. ten 28.00 6.00 168.00
G.I. plain washer. 100 0.28 75.00 21.00
Bitumen washer. 100 0.56 15.00 8.40
Epoxy Kg 0.22 340.00 76.16
Terpin Tel Ltr 0.20 55.00 11.00
Labour: Carpenter I/ Foreman each. 0.50 300.00 150.00
Carpenter II / Fitter each. 1.00 275.00 275.00
Other labour. each. 1.50 200.00 300.00
Total A 4672.50
Water Charges and sundries 1.00% on 4672.50 46.73
Overheads 7.50% on 4672.50 350.44
Contractors profit 7.50% 4672.50 350.44
C 5420.11
Contract Tax 0.00% C 0.00
Cost for 10.35 Rm 5420.11
Cost of 1m Rs 523.68
Page 146
4 Nos. sheets of 2.50x0.90m. width used.
Length= 2.5x 4 = 10.00m.
Overlaps 3 x 0.25 = 0.75m.
Net length = 9.25m.
Weight 4x2.50x0.90x5.40= 48.60Kgs
Cost of sheets. MT 0.05 83743.43 4069.93
G.I. bolts and Nuts 25x6mm @4 bolts in each joint.
Cost of bolt and nuts. 10 12.00 6.00 72.00
G.I. plain washer. 100 0.12 75.00 9.00
Bitumen washer. 100 0.12 15.00 1.80
Epoxy Kg 0.10 340.00 32.64
Terpin Tel Ltr 0.10 55.00 5.50
Labour: Carpenter I each. 0.10 300.00 30.00
Carpenter II each. 0.75 275.00 206.25
Other labour. each. 1.50 200.00 300.00
Total A 4727.12
Water Charges and sundries 1.00% on 4727.12 47.27
Overheads 7.50% on 4727.12 354.53
Contractors profit 7.50% 4727.12 354.53
C 5483.45
Contract Tax 0.00% C 0.00
Cost for 9.35 Rm 5483.45
Cost of 1m Rs 586.47
Page 147
Supplying, fabricating, fitting & fixing steel tubular
trusses including cutting, hoisting, fixing in position
20.1 welded and bolted with special washer etc and
applying a priming coat of approved steel primer or as
per the direction of Engineer - in Charge
Cost for a trusses and trussed purlin consisting of
Tees, Angle, Flat MS Plate etc. weighing 3.84 qtls for
7.60 m span
Material: Cost of tubular.
Principal rafter Tubular bars of size 100 x 100 x 10
mm
Length 2 x 4.75 = 9.50 m
Wt. @ 15Kg/m 9.50 x 15 = 142.50 Kg
Struts ( Angle ( 40 x 40 x 6 mm)
Length 2 x 1.35 = 2.70 m
Wt. @ 3.5Kg/m 2.70 x 3.50 = 9.45 Kg
Total 151.95 Kg
Add 5% for wastage 7.60 Kg
159.55 Kg
Cost of T tubular and angular steel kg. 159.55 47.25 7538.62
Ties ( Flat ( 50 x 12 mm size )
Length 2 x 2.7 = 5.40 m
Weight @ 4.70 Kg/M 5.40 x 4.70 = 25.38 Kg
Ties Central ( 50 x 10mm )
Length 1 x 2.80
Weight @ 9.90 Kg/M 2.80 x 3.90 = 10.92 Kg
Braces Flat ( 40 x 10)mm size
Length 2 x 1.84 = 3.68 m
Weight @ 3.1Kg/m 3.68 x 3.10 = 11.408 Kg
47.71 Kg
Add 5% for wastage 2.39 Kg
50.09 Kg
kg. 50.09 47.25 2366.91
Gusset plate ( MS ) 10 mm thick at top 1 x 0.75 x
0.35 = 0.26 sqm
Shoe 4 x 0.45 x 0.45 = 0.81 sqm
= 1.07 sqm
Weight @ 78.4Kg/sqm 1.07 x 78.40 = 83.89 Kg
12mm plate at the point of principal rafter and struts
2 x 0.30 x 0.20 = 0.12 sqm
At the point of Tie beam brace & strut
2 x 0.50 x 0.30 = 0.300 sqm
Sole plate 2 x 0.40 x 0.45 = 0.405 sqm
Anchor plate 2 x 0.45 x 0.10 = 0.09 sqm
Total = 0.915 sqm
Weight @ 94.2kg/m2 0.915 x 94.2 = 86.19 Kg
170.08
kg. 170.08 47.25 8036.28
Riveting & bolting Rivets 16mm dia 50mm long = 56.00 Nos
Add wastage 5% 2.80 Nos
58.80 Nos
Say No 59.00 8.00 472.00
Holding down bolts 20mm dia 4 x 450 mm long No 4.00 60.00 240.00
Cost of priming sqm 5.70 123.00 701.10
Labour Welder / Black smith I. each 1.00 300.00 300.00
Fitter / Black Smith II. each 1.50 275.00 412.50
Helper (Other labour). each 7.00 200.00 1400.00
A 21467.41
Water Charges and sundries 1.00% on 21467.41 214.67
Overheads 7.50% on 21467.41 1610.06
Page 148
Contractors profit 7.50% on 21467.41 1610.06
C 24902.20
Contract Tax 0.00% on C 0.00
Cost for 379.72 Kgs 24902.20
Cost for Kg Rs 65.58
Page 149
Cost of priming sqm 5.70 123.00 701.10
Labour Welder / Black smith I. each 2.00 300.00 600.00
Fitter / Black Smith II. each 3.00 275.00 825.00
Helper (Other labour). each 15.00 200.00 3000.00
A 23779.91
Water Charges and sundries 1.00% on 23779.91 237.80
Overheads 7.50% on 23779.91 1783.49
Contractors profit 7.50% on 23779.91 1783.49
C 27584.69
Contract Tax 0.00% on C 0.00
Cost for 379.72 Kgs 27584.69
Cost per Kg Rs 72.64
Page 150
Cost of rolling shutter i/c hood cover 2.5m height and
coiled type spring 2 nos carting and fixing on site i/c
sqm 7.50 1507.00 11302.50
commissioning to the satisfaction of Engineer - in-
charge i/c top cover Ball bearing etc. complete:
Cost of fabrication i/c welding rod etc 15.00% 1695.38
Carriage of shutters 4.50% 508.61
Labour for repairing after fixing at site Welder II each 0.30 275.00 82.50
Welder - III each 0.30 250.00 75.00
A 13663.99
Water Charges and sundries 1.00% on 13663.99 136.64
Overheads 7.50% on 13663.99 1024.80
Contractors profit 7.50% on 13663.99 1024.80
C 15850.23
Contract Tax 0% on C 0.00
Cost for 7.50 sqm 15850.23
Cost for one sqm Rs 2113.36
Page 151
Cost of fabrication of grills Kgs 0.15 68.83
Laboufor fittings: Welder / Masson I each 0.15 300.00 45.00
Helper each 0.15 200.00 30.00
A 602.71
Water Charges and sundries 1.00% on 602.71 6.03
Overheads 7.50% on 602.71 45.20
Contractors profit 7.50% on 602.71 45.20
C 699.14
Contract Tax 0.00% on C 0.00
Cost for 9.56 Kgs 699.14
Rate for one Kg Rs 73.13
Page 152
Add wastage 10% = 3.60 m
Total = 39.60 m
Weight = 39.60 x 0.80 kg/m = 31.68 Kgs qtls 31.68
( iv) 20x5mm flat stopper and hold fasts
4 x 0.45 = 1.80 m
Hold fasts = 2 x 4 x0.20 = 1.60 m
Total = 3.40 m
Weight = 3.40 x 0.80 Kg.m = 2.72 kgs qtls 2.72
(v) 16mm dia rod for handle =2x0.45x1.58Kg/m
=1.422 kg
Add wastage = 0.14 kg
Total = 1.564 kgs qtls 1.56
(vi) Anchor bolts 12mm dia 75mm long
qtls 2.30
2x5=10nos=2.3kg
Total Kgs 98.32 47.00 4621.23
(vii) 40mm dia steel pulley Nos 8.00 100.00 800.00
(viii) 6 mm dia rivet Nos 40.00 2.00 80.00
5501.23
Carriage 4.50% 247.56
5748.79
Labour for cutting & fabrication and fixing 15% 862.32
Labour for making holes Masson II Each 0.25 275.00 68.75
Helper Each 0.50 200.00 100.00
A 6779.86
Water Charges and sundries 1.00% on 6779.86 67.80
Overheads 7.50% on 6779.86 508.49
Contractors profit 7.50% on 6779.86 508.49
C 7864.64
Contract Tax 0.00% on C 0.00
Cost for 3.6 sqm 7864.64
Cost for one sqm Rs 2184.62
Page 153
Water Charges and sundries 1.00% on 1949.14 19.49
Overheads 7.50% on 1949.14 146.19
Contractors profit 7.50% on 1949.14 146.19
C 2261.01
Contract Tax 0.00% on C 0.00
Cost for 5 M 2261.01
Cost for 1 m Rs 452.20
Providing and fixing anodized aluminum works for
21 ALUMINUM WORKSventilators and partitions with
doors, windows,
extruded built up standard tubular or other section of
approved make confirming IS 733 and IS 1285, fixed
with rawl plugs and screws or with fixing clips or with
expansion hold fasteners i/c necessary filling up the
gaps at junctions, at top, bottom and sides with
21.1
required PVC / neoprene felt, etc. Al. section shall be
smooth, rust free, straight, mitered and joined
mechanically wherever required i/c cleat angle, Al
snap beading for glazing / paneling CP brass /
stainless screws, all complete as per design and
drawings
Details and ofthe
of cost directionforofdoor,
Al shutters the windows
Engineer& - in -
charge
Ventilator for 5 m x 3 m = 15 sqm.
External member of the frame ( Jindal sec. 4605 )
Vertical member 2 x 3.00 = 6.00 m
Hor. Member 2 x 5.00 = 10.00 m
Total = 16.00 m 1.653 Kg/m 26.45 Kgs.
Internal member of the frame ( Jindal sec. 4604)
Vertical member 4 x 3.00 = 12.00 m
Hor. Member 2 x 5.00 = 10.00 m
Total = 22.00 m 1.692 Kg/m 37.22 Kgs.
Al snap beading on both side ( Jindal sec. 4407)
Ver/member 2 x 3 x 5 x 1.00 = 30.00 m
Hor. Member 2 x 5 x 3 x 1.00 = 30.00 m
Add Wastage =3.00 m
Total = 63.00 m 0.176 Kg/m 11.09 Kgs.
Angle cleat ( 38 x 38 x 4.8)mm 50 mm long
36 x 0.05 = 1.80 m 0.985 Kg/m 1.77 Kgs.
TOTAL 76.53 Kgs.
Materials cost Kg 76.53 240.00 18367.20
CP brass / stainless screw Each 140.00 3.00 420.00
Dash hold fastener Each 24.00 20.00 480.00
19267.20
Labour charge for making ready by cutting jointing etc
15.0% 2890.08
15% of materials cost
Carriage 0.05 867.02
Labour charge for fixing on site Fitter I No 0.50 300.00 150.00
Helper No 0.50 200.00 100.00
A 23274.30
Water Charges and sundries 1.00% on 23274.30 232.74
Overheads 7.50% on 23274.30 1745.57
Add contractor profit 7.50% on 23274.30 1745.57
C 26998.18
Add contract tax 0.00% on C 0.00
Rate for 15 sqm 26998.18
Rate for 1 sqm 1799.88
Page 154
21.2 Providing and fixing prelaminated sheet three layer
medium density (exterior grade) particle board grade -
I type - II confirming IS 12823 bonded with phenol
formaldehyde synthetic resin of approved brand and
manufacture in panelling fixed in Aluminium doors,
wndows, shutters and partition frames with CP brass /
stain less steel screws etc. complete as per
architectural drawings and direction of Engineer - in-
Charge.
Details of cost of Providing and fitting/F paneling for
doors, windows with pre-laminated particle board for 6
sqm area
Materials
Pre-laminated board = 6.00 sqm
Add wastage 5% = 0.30 sqm
Total = 6.30 sqm sqm 6.30 592.03 3729.79
Add carriage 0.50% 18.65
CP brass / stainless screw 1% 37.30
Labour Carpenter - I Nos 0.80 300.00 240.00
Helper Nos 0.80 200.00 160.00
A 4185.74
Water Charges and sundries 1.00% on 4185.74 41.86
Overheads 7.50% on 4185.74 313.93
Add contractor profit 7.50% on 4185.74 313.93
C 4855.46
Add contract tax 0.00% on C 0.00
Rate for 6 sqm 4855.46
Rate for one sqm Rs 809.24
Page 155
Helper. each. 0.25 200.00 50.00
A 266.30
Water Charges and sundries 1.00% on 266.30 2.66
Overheads 7.50% on 266.30 19.97
Add for C.P. @ 10%. 8% on 266.30 19.97
C 308.90
Contract Tax 0% on C 0.00
Rate for 10 sqm 617.80
Rate for one sqm Rs 61.78
Page 156
Painting with ready mixed paint of approved quality
and shade with two or more coats to give an even and
22.2.2
smooth shade i/c cleaning the surface complete on old
surface.
Details 10m2 material. Materials Liter. 0.75 207.00 155.25
Labour. Painter I. each 0.45 300.00 135.00
Helper. each 0.45 200.00 90.00
A 380.25
Water Charges and sundries 1.00% on 380.25 3.80
Overheads 7.50% on 380.25 28.52
Add for C.P. @ 10%. 8% on 380.25 28.52
C 441.09
Contract Tax 0% on C 0.00
Rate for 10 sqm 441.09
Rate for one sqm Rs 44.11
Page 157
Add for C.P. @ 10%. 7.50% on 322.35 24.18
C 373.93
Contract Tax 0% on C 0.00
Cost for 10 sqm 373.93
Cost for 1 sqm Rs 37.39
Considering the length of pipe is 30m
50mm dia =30 x 3.14 x 0.0564(Ex Dia) = 5.31 x 37.39 = 198.65
Rate for 1 Rm = 6.62
Page 158
Contract Tax 0% on C 0.00
Cost for 10 sqm 364.24
Cost for one sqm 36.42
Considering the length of pipe is 30m
50mm dia =30 x 3.14 x 0.0564(Ex Dia) = 5.316 x 36.42 = 193.61
Rate for 1 Rm Rs 6.45
Page 159
on B 342.21
Contract Tax 0.0% C 0.00
Ratefor 10 sqm 342.21
Rate for 1 sqm Rs 34.22
22.6 POLISHING
Varnishing one or more coats with Gopal varnish or
superior quality spray varnish i/c preparation of
22.6.1
surface with wood putty, sand paper etc on old work
complete. old surface
Details of cost for 10m2.
Material. Varnish. Liter. 1.00 190.00 190.00
Labour. Painter. each. 1.00 300.00 300.00
Helper. each. 1.00 200.00 200.00
A 690.00
Water Charges and sundries 1.00% on 690.00 6.90
Overheads 7.50% on 690.00 51.75
Add for C.P. 7.50% on 690.00 51.75
800.40
Contract Tax 0.00% C 0.00
Ratefor 10 sqm 800.40
Rate for 1 sqm Rs 80.04
Page 160
Providing and French spirit polishing one or more
22.6.3 coats including cleaning of the surface of dirt and dust
papered smooth etc on old surface complete.
Details of cost for 10m2.
Material.
Spirit. Liter. 1.63 75.00 122.25
Shellae. Kg. 0.23 650.00 148.20
Labour. Painter I. each. 1.60 300.00 480.00
Helper. each. 1.60 200.00 320.00
A 1070.45
Water Charges and sundries 1.00% on 1070.45 10.70
Overheads 7.50% on 1070.45 80.28
Add for carriage of materials, cost of sand paper,
putty, woolen cloth, turpentine oil, linseed oil etc @3%.
3% on 1070.45 32.11
Add for material for finishing coat with Chandras,
Rajan & thinner.
Add for C.P. 7.5% 1070.45 80.28
B 1273.82
Contract Tax 0.0% C 0.00
Ratefor 10 sqm 1273.82
Rate for 1 sqm Rs 127.38
Page 161
Materials: White lime. Qtl 0.02 1760.00 35.20
Indigo. 10 gm 0.60 3.50 2.10
Labour: Painter II. each. 0.12 275.00 33.00
Helper. each. 0.12 200.00 24.00
A 94.30
Water Charges and sundries 1.00% on 94.30 0.94
Overheads 7.50% on 94.30 7.07
Add for C.P 7.5% on 94.30 7.07
C 109.38
Contract Tax 0.0% on C 0.00
Ratefor 10 sqm 109.38
Rate for 1 sqm Rs 10.94
Page 162
Labour. Painter II. each. 0.32 275.00 88.00
Helper. each. 0.30 200.00 60.00
A 248.00
Water Charges and sundries 1.00% on 248.00 2.48
Overheads 7.50% on 248.00 18.60
Add for C.P 7.50% on 248.00 18.60
C 287.68
Contract Tax 0.00% on C 0.00
Ratefor 10 sqm 287.68
Rate for 1 sqm Rs 28.77
Distempering with dry distemper on New surface two
or more coats of required shade to give an even and
uniform shade including priming coat of whiting to give
22.8.2 an even shade after thorough cleaning of dirt, dust,
loose pieces of scabs, grease etc including surface
preparation by sand papering etc complete. New
surface
Details of cost for 10m2.
Materials:
Dry distemper. Kg. 1.50 100.00 150.00
Lime washing sqm 10.00 10.94 109.38
Whitening. Kg. 0.09 135.00 12.15
Labour. Painter II. each. 0.52 275.00 143.00
Helper (O/L) each. 0.50 200.00 100.00
A 514.53
Water Charges and sundries 1.00% on 514.53 5.15
Overheads 7.50% on 514.53 38.59
Add for C.P 7.50% on 514.53 38.59
C 596.86
Contract Tax 0.00% on C 0.00
Ratefor 10 sqm 596.86
Rate for 1 sqm Rs 59.69
Providing and distempering with oil bond washable
acrylic distemper on old surface of approved brand
22.8.3
and manufacture to give an even shade including
preparation of surface etc complete.
Details of cost for 10m2.
Materials: Distemper. Kgs. 1.00 90.00 90.00
Labour. Painter II. each. 0.35 275.00 96.25
Helper (O.L) each. 0.32 200.00 64.00
A 250.25
Water Charges and sundries 1.00% on 250.25 2.50
Overheads 7.50% on 250.25 18.77
Add for C.P 7.50% on 250.25 18.77
C 290.29
Contract Tax 0.00% on C 0.00
Ratefor 10 sqm 290.29
Rate for 1 sqm Rs 29.03
Page 163
Water Charges and sundries 1.00% on 460.95 4.61
Overheads 7.50% on 460.95 34.57
Add for C.P 7.50% on 460.95 34.57
C 534.70
Contract Tax 0.00% on C 0.00
Ratefor 10 sqm 534.70
Rate for 1 sqm Rs 53.47
Page 164
Ratefor 10 sqm 323.65
Rate for 1 sqm Rs 32.37
Page 165
Details of cost per 10m2.
Materials: Paint. Liter. 0.75 249.00 186.75
Labour. Painter I. each. 0.40 300.00 120.00
Helper. each. 0.40 85.00 34.00
A 340.75
Water Charges and sundries 1.00% on 340.75 3.41
Overheads 7.50% on 340.75 25.56
Add for C.P 7.50% on 340.75 25.56
C 395.28
Contract Tax 0.00% on C 0.00
Ratefor 10 sqm 395.28
Rate for 1 sqm Rs 39.53
23 WATER SUPPLY
Providing, Fitting and fixing GI pipe of medium class
complete i/c cuttings and making good the walls etc.
23.1
exposed on wall (Internal Works) excluding the cost of
fittings all complete:
15mm dia pipe
Analysis for 10m length GI pipe
Materials : 15mm dia Gi Pipe 10.0m 10.00 M
Wastage 5% = 0.50 M
Total = 10.50 M 112.54 1181.67
Labour : Plumber - I each 0.15 300.00 45.00
Plumber II each 1.20 275.00 330.00
Helper each 1.20 200.00 240.00
A 1796.67
Water Charges and sundries 1.00% on 1796.67 17.97
Overheads 7.50% on 1796.67 134.75
Add for contractors profit. 7.50% on 1796.67 134.75
C 2084.14
Contract tax 0.00% on C 0.00
Rate for 10 M 2084.14
Rate for 1 m Rs 208.41
Page 166
Rate for 10 M 3794.25
Rate for 1 m Rs 379.43
Providing, Fitting and fixing GI pipe of medium class,
23.3 (excluding trenching, refilling, compacting and the
cost of fittings) all complete.
23.3.1 15mm dia pipe
Analysis for 100m length GI pipe
Materials : 15mm dia Gi Pipe 100.0m m 100.00
Wastage 5% = m 5.00
Total = m 105.00 112.54 11816.65
For trenching = 0.30 x 0.50 x 100.00 = 15.0 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Labour for laying of pipe : Plumber - I each 0.50 300.00 150.00
Plumber II each 2.25 275.00 618.75
Helper each 2.25 200.00 450.00
A 13035.40
Water Charges and sundries 1.00% on 13035.40 130.35
Overheads 7.50% on 13035.40 977.66
Add for contractors profit. 7.50% on 13035.40 977.66
C 15121.07
Contract tax 0.00% on C 0.00
Rate for 100 M 15121.07
Rate for one m Rs 151.21
23.3.2 20mm dia pipe
Analysis for 100m length GI pipe
Materials : 20mm dia Gi Pipe 100.0m 100.00 M
Wastage 5% = 5.00 M
Total = 105.00 M 144.86 15210.18
For trenching = 0.50 x 0.30 x 100.00 = 15.0 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Labour for laying of pipe : Plumber - I each 0.50 300.00 150.00
Plumber II each 2.50 275.00 687.50
Helper each 2.50 200.00 500.00
A 16547.68
Water Charges and sundries 1.00% on 16547.68 165.48
Overheads 7.50% on 16547.68 1241.08
Add for contractors profit. 7.50% on 16547.68 1241.08
C 19195.32
Contract tax 0.00% on C 0.00
Rate for 100 M 19195.32
Rate for one m Rs 191.95
Page 167
Providing, Fitting and fixing GI pipe of medium class,
23.4 (excluding trenching, refilling, compacting and the
cost of fittings) all complete.
32mm dia pipe
23.4.1 Analysis for 100m length GI pipe
Materials : 32mm dia Gi Pipe 100.0m 100.00 M
Wastage 5% = 5.00 M
Total = 105.00 M 274.97 28871.67
For trenching = 0.50 x 0.45 x 100.00 = 22.50 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Labour for laying of pipe : Plumber - I each 0.50 300.00 150.00
Plumber II each 3.00 275.00 825.00
Helper each 3.00 200.00 600.00
A 30446.67
Water Charges and sundries 1.00% on 30446.67 304.47
Overheads 7.50% on 30446.67 2283.50
Add for contractors profit. 7.50% on 30446.67 2283.50
C 35318.14
Contract tax 0.00% on C 0.00
Rate for 100 M 35318.14
Rate for 1 m Rs 353.18
Page 168
23.4.4 65 mm dia pipe
Analysis for 100m length GI pipe
Materials : 65mm dia Gi Pipe 100.0m 100.00 M
Wastage 5% = 5.00 M
Total = 105.00 M 579.22 60818.52
For trenching = 0.50 x 0.45 x 100.00 = 22.50 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Labour for laying of pipe : Plumber - I each 0.75 300.00 225.00
Plumber II each 4.00 275.00 1100.00
Helper each 4.00 200.00 800.00
A 62943.52
Water Charges and sundries 1.00% on 62943.52 629.44
Overheads 7.50% on 62943.52 4720.76
Add for contractors profit. 7.50% on 62943.52 4720.76
C 73014.48
Contract tax 0.00% on C 0.00
Rate for 100 M 73014.48
Rate for one m Rs 730.14
Page 169
23.5.3 150mm dia pipe
Analysis for 100m length GI pipe
Materials : 100mm dia Gi Pipe 100.0m 100.00 M
Wastage 5% = 5.00 M
Total = 105.00 M 1925.98 202228.27
For trenching = 0.75 x 0.60 x 100.00 = 45.00 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Labour for laying of pipe : Plumber - I each 1.00 300.00 300.00
Plumber II each 5.00 275.00 1375.00
Helper each 5.00 200.00 1000.00
A 204903.27
Water Charges and sundries 1.00% on 204903.27 2049.03
Overheads 7.50% on 204903.27 15367.75
Add for contractors profit. 7.50% on 204903.27 15367.75
C 237687.80
Contract tax 0.00% on C 0.00
Rate for 100 M 237687.80
Rate for one m Rs 2376.88
23.5.4 200mm dia pipe
Analysis for 100m length GI pipe
Materials : 200mm dia Gi Pipe 100.0m 100.00 M
Wastage 5% = 5.00 M
Total = 105.00 M 4065.69 426897.35
For trenching = 0.75 x 0.60 x 100.00 = 45.00 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Labour for laying of pipe : Plumber - I each 1.00 300.00 300.00
Plumber II each 6.00 275.00 1650.00
Helper each 6.00 200.00 1200.00
A 430047.35
Water Charges and sundries 1.00% on 430047.35 4300.47
Overheads 7.50% on 430047.35 32253.55
Add for contractors profit. 7.50% on 430047.35 32253.55
C 498854.92
Contract tax 0.00% on C 0.00
Rate for 100 M 498854.92
Rate for one m Rs 4988.55
23.5.5 250mm dia pipe
Analysis for 100m length GI pipe
Materials : 250mm dia Gi Pipe 100.0m 100.00 M
Wastage 5% = 5.00 M
Total = 105.00 M 4319.17 453513.20
For trenching = 0.75 x 0.60 x 100.00 = 45.00 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Labour for laying of pipe : Plumber - I each 1.00 300.00 300.00
Plumber II each 7.00 275.00 1925.00
Helper each 7.00 200.00 1400.00
A 457138.20
Water Charges and sundries 1.00% on 457138.20 4571.38
Overheads 7.50% on 457138.20 34285.37
Add for contractors profit. 7.50% on 457138.20 34285.37
C 530280.32
Contract tax 0.00% on C 0.00
Rate for 100 M 530280.32
Rate for one m Rs 5302.80
Providing, Fitting and fixing DI pipe,(excluding the cost
23.6 of fittings, trenching, refilling and compacting etc) all
complete:
23.6.1 80mm dia pipe
Page 170
Analysis for 80m length
Materials : 80mm dia 100.0m 100.00 M
Wastage 5% = 5.00 M
Total = 105.00 M 1419.31 149027.22
For trenching = 0.75 x 0.60 x 100.00 = 45.00 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Labour for laying of pipe : Plumber - I each 0.75 300.00 225.00
Plumber II each 4.25 275.00 1168.75
Helper each 4.25 200.00 850.00
A 151270.97
Water Charges and sundries 1.00% on 151270.97 1512.71
Overheads 7.50% on 151270.97 11345.32
Add for contractors profit. 7.50% on 151270.97 11345.32
C 175474.32
Contract tax 0.00% on C 0.00
Rate for 100 M 175474.32
Rate for one m Rs 1754.74
23.6.2 100mm dia pipe
Analysis for 100m length
Materials : 100mm dia Pipe 100.0m 100.00 M
Wastage 5% = 5.00 M
Total = 105.00 M 1444.27 151648.74
For trenching = 0.75 x 0.60 x 100.00 = 45.00 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Labour for laying of pipe : Plumber - I each 0.85 300.00 255.00
Plumber II each 4.50 275.00 1237.50
Helper each 4.50 200.00 900.00
A 154041.24
Water Charges and sundries 1.00% on 154041.24 1540.41
Overheads 7.50% on 154041.24 11553.09
Add for contractors profit. 7.50% on 154041.24 11553.09
C 178687.83
Contract tax 0.00% on C 0.00
Rate for 100 M 178687.83
Rate for one m Rs 1786.88
23.6.3 150mm dia pipe
Analysis for 100m length
Materials : 100mm dia Pipe 100.0m 100.00 M
Wastage 5% = 5.00 M
Total = 105.00 M 2116.59 222241.77
For trenching = 0.75 x 0.60 x 100.00 = 45.00 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Labour for laying of pipe : Plumber - I each 1.00 300.00 300.00
Plumber II each 5.00 275.00 1375.00
Helper each 5.00 200.00 1000.00
A 224916.77
Water Charges and sundries 1.00% on 224916.77 2249.17
Overheads 7.50% on 224916.77 16868.76
Add for contractors profit. 7.50% on 224916.77 16868.76
C 260903.46
Contract tax 0.00% on C 0.00
Rate for 100 M 260903.46
Rate for one m Rs 2609.03
23.6.4 200mm dia pipe
Analysis for 100m length pipe
Materials : 200mm dia Pipe 100.0m 100.00 M
Wastage 5% = 5.00 M
Total = 105.00 M 2818.68 295961.58
For trenching = 0.75 x 0.60 x 100.00 = 45.00 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Page 171
Labour for laying of pipe : Plumber - I each 1.00 300.00 300.00
Plumber II each 6.00 275.00 1650.00
Helper each 6.00 200.00 1200.00
A 299111.58
Water Charges and sundries 1.00% on 299111.58 2991.12
Overheads 7.50% on 299111.58 22433.37
Add for contractors profit. 7.50% on 299111.58 22433.37
C 346969.44
Contract tax 0.00% on C 0.00
Rate for 100 M 346969.44
Rate for one m Rs 3469.69
23.6.5 250mm dia pipe
Analysis for 100m length pipe
Materials : 250mm dia Pipe 100.0m 100.00 M
Wastage 5% = 5.00 M
Total = 105.00 M 3741.26 392831.78
For trenching = 0.75 x 0.60 x 100.00 = 45.00 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Labour for laying of pipe : Plumber - I each 1.00 300.00 300.00
Plumber II each 7.00 275.00 1925.00
Helper each 7.00 200.00 1400.00
A 396456.78
Water Charges and sundries 1.00% on 396456.78 3964.57
Overheads 7.50% on 396456.78 29734.26
Add for contractors profit. 7.50% on 396456.78 29734.26
C 459889.87
Contract tax 0.00% on C 0.00
Rate for 100 M 459889.87
Rate for one m Rs 4598.90
23.6.6 300mm dia pipe
Analysis for 100m length pipe
Materials : 300mm dia Pipe 100.0m 100.00 M
Wastage 5% = 5.00 M
Total = 105.00 M 4634.05 486574.79
For trenching = 0.75 x 0.60 x 100.00 = 45.00 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Labour for laying of pipe : Plumber - I each 5.00 300.00 1500.00
Plumber II each 10.00 275.00 2750.00
Helper each 50.00 200.00 10000.00
A 500824.79
Water Charges and sundries 1.00% on 500824.79 5008.25
Overheads 7.50% on 500824.79 37561.86
Add for contractors profit. 7.50% on 500824.79 37561.86
C 580956.76
Contract tax 0.00% on C 0.00
Rate for 100 M 580956.76
Rate for one m Rs 5809.57
23.6.7 350mm dia pipe
Analysis for 100m length pipe
Materials : 350mm dia Pipe 100.0m 100.00 M
Wastage 5% = 5.00 M
Total = 105.00 M 6016.47 631729.46
For trenching = 0.75 x 0.60 x 100.00 = 45.00 cum cum 0.00 207.00 0.00
Refilling with mixed soil cum 0.00 200.00 0.00
Labour for laying of pipe : Plumber - I each 5.00 300.00 1500.00
Plumber II each 10.00 275.00 2750.00
Helper each 60.00 200.00 12000.00
A 647979.46
Water Charges and sundries 1.00% on 647979.46 6479.79
Overheads 7.50% on 647979.46 48598.46
Page 172
Add for contractors profit. 7.50% on 647979.46 48598.46
C 751656.17
Contract tax 0.00% on C 0.00
Rate for 100 M 751656.17
Rate for one m Rs 7516.56
Providing, Fitting and fixing PVC 32mm dia pipe
complete with GI fittings and clamps i/c cuttings and
23.7
making good the walls etc. on wall for wash basin
connector to main line.
32mm dia pipe
Analysis for 10m length PVC pipe
Materials : 32mm dia PVC Pipe 10.0m 10.00 M
Wastage 5% = 0.50 M
Total = 10.50 M 70.00 735.00
1:3:6 CC to close the chase cum 0.06 3294.80 194.72
Cement Plaster 1:4 sqm 1.83 1002.85 1835.22
Labour for cutting chase : Masson III each 0.95 250.00 237.50
Labour for fitting of pipes : Plumber -I each 0.15 300.00 45.00
Plumber II each 1.40 275.00 385.00
Helper each 1.40 200.00 280.00
For shuttering of gaps Masson III each 0.16 250.00 40.63
Helper each 0.16 200.00 32.50
For plastering Masson II each 0.40 300.00 120.00
Masson III each 0.35 250.00 87.50
Waterman each 0.10 200.00 20.00
A 4013.07
Water Charges and sundries 1.00% on 4013.07 40.13
Overheads 7.50% on 4013.07 300.98
Add for contractors profit. 7.50% on 4013.07 300.98
C 4655.16
Contract tax 0.00% on C 0.00
Rate for 10 M 4655.16
Rate for one m Rs 465.52
Providing, Fitting and fixing Chromium plated fittings of
23.8 approved quality and size complete: (JACQUEAR /
EQUIVALENT)
a) BIB COCK 15 MM DIA
Details of cost of providing & fixing one fittings
Materials each 1.00 515.00 515.00
A 515.00
Water Charges and sundries 1.00% on 515.00 5.15
Overheads & fitting fixing charge 7.50% 38.63
Add for contractors profit. 7.50% on A 38.63
B 597.41
Contract tax 0.00% on B 0.00
Rate for one Rs 597.41
b) STOP COCK 15 MM DIA (CONCEALED WORKS)
Details of cost of providing & fixing one fittings
Materials each 1.00 880.00 880.00
Water Charges and sundries 1.00% on 880.00 8.80
Overheads & fitting fixing charge 7.50% 66.00
Add for contractors profit. 7.50% on 880.00 66.00
B 1020.80
Contract tax 0.00% on B 0.00
Rate for one Rs 1020.80
c) PILLAR COCK 15 MM DIA
Details of cost of providing & fixing one fittings
Materials each 1.00 525.00 525.00
Water Charges and sundries 1.00% on 525.00 5.25
Overheads & fitting fixing charge 7.50% 39.38
Page 173
Add for contractors profit. 7.50% on A 39.38
B 609.01
Contract tax 0.00% on B 0.00
Rate for one Rs 609.01
d) ANGULAR STOP COCK 15 MM DIA
Details of cost of providing & fixing one fittings
Materials each 1.00 970.00 970.00
A 970.00
Water Charges and sundries 1.00% on 970.00 9.70
Overheads & fitting fixing charge 7.50% 72.75
Add for contractors profit. 7.50% on A 72.75
B 1125.20
Contract tax 0.00% on B 0.00
Rate for one Rs 1125.20
e) BIB COCK LONG BODY 15 MM DIA
Details of cost of providing & fixing one fittings
Materials each 1.00 695.00 695.00
Water Charges and sundries 1.00% on 695.00 6.95
Overheads & fitting fixing charge 7.50% 52.13
Add for contractors profit. 7.50% on A 52.13
B 806.21
Contract tax 0.00% on B 0.00
Rate for one Rs 806.21
f) CONNECTING PIPE
Details of cost of providing & fixing one fittings
Materials each 1.00 160.00 160.00
A 160.00
Water Charges and sundries 1.00% on 160.00 1.60
Overheads & fitting fixing charge 7.50% 12.00
Add for contractors profit. 7.50% on A 12.00
B 185.60
Contract tax 0.00% on B 0.00
Rate for one Rs 185.60
g) SHOWER ROSE WITH ARM
Details of cost of providing & fixing one fittings
Materials Shower rose each 1.00 265.00 265.00
Shower arm each 2.00 285.00 570.00
835.00
A 835.00
Water Charges and sundries 1.00% on 835.00 8.35
Overheads & fitting fixing charge 7.50% 62.63
Add for contractors profit. 7.50% on A 62.63
B 968.61
Contract tax 0.00% on B 0.00
Rate for one Rs 968.61
h) SHOWER ROSE WITHOUT ARM
Details of cost of providing & fixing one fittings
Materials Shower rose each 1.00 675.00 675.00
Water Charges and sundries 1.00% on 675.00 6.75
Overheads & fitting fixing charge 7.50% 50.63
Add for contractors profit. 7.50% on A 50.63
B 783.01
Contract tax 0.00% on B 0.00
Rate for one Rs 783.01
i) BASIN MIXTURE
Details of cost of providing & fixing one fittings
Materials each 1.00 1450.00 1450.00
A 1450.00
Water Charges and sundries 1.00% on 1450.00 14.50
Overheads & fitting fixing charge 7.50% 108.75
Page 174
Add for contractors profit. 7.50% on A 108.75
B 1682.00
Contract tax 0.00% on B 0.00
Rate for one Rs 1682.00
Providing, Fitting and fixing brass fittings of approved
23.9
quality and size complete:
a) BIB COCK 15 MM DIA
Details of cost of providing & fixing one fittings
Materials each 1.00 415.00 415.00
A 415.00
Water Charges and sundries 1.00% on 415.00 4.15
Overheads & fitting fixing charge 7.50% 31.13
Add for contractors profit. 7.50% on A 31.13
B 481.41
Contract tax 0.00% on B 0.00
Rate for one Rs 481.41
b) STOP COCK 15 MM DIA
Details of cost of providing & fixing one fittings
Materials each 1.00 405.00 405.00
Water Charges and sundries 1.00% on 405.00 4.05
Overheads & fitting fixing charge 7.50% 30.38
Add for contractors profit. 7.50% on A 30.38
B 469.81
Contract tax 0.00% on B 0.00
Rate for one Rs 469.81
c) GATE WAY VALVE 15MM DIA
Details of cost of providing & fixing one fittings
Materials each 1.00 445.00 445.00
A 445.00
Water Charges and sundries 1.00% on 445.00 4.45
Overheads & fitting fixing charge 7.50% 33.38
Add for contractors profit. 7.50% on A 33.38
B 516.21
Contract tax 0.00% on B 0.00
Rate for one Rs 516.21
d) GATE WAY VALVE 20MM DIA
Details of cost of providing & fixing one fittings
Materials each 1.00 605.00 605.00
A 605.00
Water Charges and sundries 1.00% on 605.00 6.05
Overheads & fitting fixing charge 7.50% 45.38
Add for contractors profit. 7.50% on A 45.38
B 701.81
Contract tax 0.00% on B 0.00
Rate for one Rs 701.81
e) GATE WAY VALVE 25MM DIA
Details of cost of providing & fixing one fittings
Materials each 1.00 895.00 895.00
A 895.00
Water Charges and sundries 1.00% on 895.00 8.95
Overheads & fitting fixing charge 7.50% 67.13
Add for contractors profit. 7.50% on A 67.13
B 1038.21
Contract tax 0.00% on B 0.00
Rate for one Rs 1038.21
f) GATE WAY VALVE 32MM DIA
Details of cost of providing & fixing one fittings
Materials each 1.00 1255.00 1255.00
A 1255.00
Water Charges and sundries 1.00% on 1255.00 12.55
Page 175
Overheads & fitting fixing charge 7.50% 94.13
Add for contractors profit. 7.50% on A 94.13
B 1455.81
Contract tax 0.00% on B 0.00
Rate for one Rs 1455.81
24 SANITARY FITTINGS.
Page 176
Providing and fitting. white vitreous china water closet
(W.C) squatting pan (Orissa type) 530mm size with
100mm SCI (Sand cost iron) P or Strap, 10 ltr low
level flushing cistern with fittings, CI brackets, 32mm
24.1
flush pipe with fittings and clamps, 20mm overflow
pipe, cutting and making good the wall and floor etc
complete. Long type or Orrisa type pan. HINDWARE
CAT NO 20004
Orissa Pan 58x44 White CAT NO 2004
Details of cost for one pan. W.C. Pan each 1.00 1050.00 1050.00
Cistern with cover lid 10 ltrs CAT NO 21001 each 1.00 674.00 674.00
100mm SCI P or S strap. each 1.00 167.00 167.00
Fitter Grade I. each 1.85 300.00 555.00
Mason II each 0.10 275.00 27.50
Helper. each 1.95 200.00 390.00
A 2863.50
Water Charges and sundries 1.00% on 2863.50 28.64
Overheads 7.5% on 2863.50 214.76
Add for contractors profit. 7.5% on 2863.50 214.76
C 3321.66
Contract tax 0.0% on C 0.00
Rate for one WC Rs 3321.66
Page 177
Mason II each 0.10 275.00 27.50
Helper. each 1.95 200.00 390.00
A 4167.50
Water Charges and sundries 1.00% on 4167.50 41.68
Overheads 7.5% on 4167.50 312.56
Add for contractors profit. 7.5% on 4167.50 312.56
C 4834.30
Contract tax 0.0% on C 0.00
Rate for one WC Rs 4834.30
Page 178
Providing and fitting white vitreous china pedestal
(European type) water closet (W.C) pan with seat and
lid, with C.P. brass hinges, 10ltr low level cistern of the
same quality with fittings & brackets 40mm flush
24.6
bend, 20mm overflow pipe with specials, including
Providing and painting and making good the wall and
floors as required all complete: W.C. pan W.C. pan
European Bidets constellation CAT NO 30006
Page 179
W.C. pan European. each 1.00 13600.00 13600.00
Labour. Fitter I. each 1.00 300.00 300.00
Mason I. each 1.00 300.00 300.00
Other labour. each 1.85 200.00 370.00
A 14570.00
Water Charges and sundries 1.00% on 14570.00 145.70
Overheads 7.5% on 14570.00 1092.75
Add for contractors profit. 7.5% on 14570.00 1092.75
C 16901.20
Contract tax 0.0% on C 0.00
Rate for one WC Rs 16901.20
Page 180
A 6756.00
Water Charges and sundries 1.00% on 6756.00 67.56
Overheads 7.5% on 6756.00 506.70
Add contractors profit. 7.5% on 6756.00 506.70
C 7836.96
Contract tax 0.0% on C 0.00
7836.96
Rate for one unit Rs 7836.96
Page 181
Water Charges and sundries 1.00% on 7588.00 75.88
Overheads 7.50% on 7588.00 569.10
Add for contractors profit. 7.5% on 7588.00 569.10
C 8802.08
Contract tax 0.0% on C 0.00
8802.08
Rate for one unit Rs 8802.08
Page 182
Water Charges and sundries 1.00% on 3286.00 32.86
Overheads 7.50% on 3286.00 246.45
Add for contractors profit. 7.50% on 3286.00 246.45
C 3811.76
Contract tax 0.0% on C 0.00
3811.76
Rate for one unit Rs 3811.76
55 cm x 40 cm
Material Wash basin (55 cm x 40 cm) each. 1.00 752.00 752.00
15mm CP pillar taps. each. 1.00 525.00 525.00
CP chain with plug. Set. 1.00 38.00 38.00
CP waste pipe with fitting 32mm. each. 1.00 160.00 160.00
Lead or PVC connection. each. 1.00 5.00 5.00
Labour. Fitter. each. 1.60 300.00 480.00
Mason I. each. 1.60 300.00 480.00
A 2440.00
Water Charges and sundries 1.00% on 2440.00 24.40
Overheads 7.50% on 2440.00 183.00
Add for contractors profit. 7.5% on 2440.00 183.00
C 2830.40
Contract tax 0.0% on C 0.00
2830.40
Rate for one unit Rs 2830.40
45 cm x 30 cm
Material Wash basin ( 45 cm x 30 cm) each. 1.00 578.00 578.00
15mm CP ESCO pillar taps. each. 1.00 525.00 525.00
CP chain with plug. Set. 1.00 38.00 38.00
CP waste pipe with fitting 32mm. each. 1.00 160.00 160.00
Lead or PVC connection. each. 1.00 5.00 5.00
Labour. Fitter. each. 1.60 300.00 480.00
Mason I. each. 1.60 300.00 480.00
A 2266.00
Water Charges and sundries 1.00% on 2266.00 22.66
Overheads 7.50% on 2266.00 169.95
Add for contractors profit. 7.5% on 2266.00 169.95
C 2628.56
Contract tax 0.0% on C 0.00
2628.56
Rate for one unit Rs 2628.56
Page 183
55 cm x 40 cm CAT NO 10001
Material Wash basin ( 55 cm x 40 cm) each. 1.00 752.00 752.00
15mm CP Brass pillar taps. each. 2.00 525.00 1050.00
CP chain with plug. Set. 2.00 38.00 76.00
CP waste pipe with fitting 32mm. each. 1.00 160.00 160.00
Lead or PVC connection. each. 2.00 5.00 10.00
Labour. Fitter. each. 1.60 300.00 480.00
Mason I. each. 1.60 300.00 480.00
A 3008.00
Water Charges and sundries 1.00% on 3008.00 30.08
Overheads 7.5% on 3008.00 225.60
Add for contractors profit. 7.5% on 3008.00 225.60
C 3489.28
Contract tax 0.0% on C 0.00
3489.28
Rate for one unit Rs 3489.28
45 cm x 30 cm CAT NO 10004
Material Wash basin ( 45 cm x 30 cm) each. 1.00 578.00 578.00
15mm CP ESCO pillar taps. each. 2.00 525.00 1050.00
CP chain with plug. Set. 2.00 38.00 76.00
CP waste pipe with fitting 32mm. each. 1.00 160.00 160.00
Lead or PVC connection. each. 2.00 5.00 10.00
Labour. Fitter. each. 1.60 300.00 480.00
Mason I. each. 1.60 300.00 480.00
A 2834.00
Water Charges and sundries 1.00% on 2834.00 28.34
Overheads 7.5% on 2834.00 212.55
Add for contractors profit. 7.5% on 2834.00 212.55
C 3287.44
Contract tax 0.0% on C 0.00
3287.44
Rate for one unit Rs 3287.44
Page 184
Providing and fitting. white vitreous china wash in
surgeons type basin with CI bracket, painted, 15mm
CP brass pillar taps, CP brass chain with rubber plug,
24.13 32mm CP brass waste pipe, lead or PVC connection
32mm dia 'CP brass cap and unions, complete
including cutting and making good the walls wherever
required. HINDWARE
49 cm x 36 cm CAT NO 10051
Material Wash basin ( 49 cm x 36 cm) each. 1.00 1100.00 1100.00
15mm CP pillar taps. each. 1.00 525.00 525.00
CP Brass chain with plug. Set. 1.00 38.00 38.00
CP waste pipe with fitting 32mm. each. 1.00 160.00 160.00
Lead or PVC connection. each. 1.00 5.00 5.00
Labour. Fitter. each. 1.60 300.00 480.00
Mason I. each. 1.60 300.00 480.00
A 2788.00
Water Charges and sundries 1.00% on 2788.00 27.88
Overheads 7.5% on 2788.00 209.10
Add for contractors profit. 7.5% on 2788.00 209.10
C 3234.08
Contract tax 0.0% on C 0.00
3234.08
Rate for one unit Rs 3234.08
51 cm x 45 cm
Material Wash basin ( 51 cm x 45 cm) each. 1.00 1169.00 1169.00
15mm CP pillar taps. each. 1.00 525.00 525.00
CP chain with plug. Set. 1.00 38.00 38.00
CP waste pipe with fitting 32mm. each. 1.00 160.00 160.00
Lead or PVC connection. each. 1.00 5.00 5.00
Labour. Fitter. each. 1.60 300.00 480.00
Mason I. each. 1.60 300.00 480.00
A 2857.00
Water Charges and sundries 1.00% on 2857.00 28.57
Overheads 7.5% on 2857.00 214.28
Add for contractors profit. 7.5% on 2857.00 214.28
C 3314.13
Contract tax 0.0% on C 0.00
3314.13
Rate for one Rs 3314.13
63 cm x 50 cm
Material Wash basin ( 63 cm x 50 cm) each. 1.00 2542.00 2542.00
15mm CP pillar taps. each. 2.00 525.00 1050.00
CP chain with plug. Set. 1.00 38.00 38.00
CP brass waste pipe with fitting 32mm. each. 1.00 160.00 160.00
Lead or PVC connection. each. 1.00 5.00 5.00
Labour. Fitter. each. 1.60 300.00 480.00
Mason I. each. 1.60 300.00 480.00
A 4755.00
Water Charges and sundries 1.00% on 4755.00 47.55
Overheads 7.5% on 4755.00 356.63
Add for contractors profit. 7.5% on 4755.00 356.63
C 5515.81
Contract tax 0.0% on C 0.00
5515.81
Rate for one Rs 5515.81
Page 185
Providing and fitting stain less steel kitchen sink with
CI brackets, CP brass chain with rubber plug 40mm
24.14 CP brass waste, CP brass tap etc complete i/c the
fittings, cuttings and making good the wall wherever
required.
610x450x200mm. CAT NO S100/150
Details of cost of one sink.
Material Kitchen Sink ( 61 cm x45 x 20 cm) each. 1.00 4037.00 4037.00
15mm CP pillar taps/bib cock. each. 1.00 525.00 525.00
CP chain with plug. Set. 1.00 38.00 38.00
CP waste pipe with fitting 32mm. each. 1.00 160.00 160.00
Lead or PVC connection. each. 1.00 5.00 5.00
Labour. Fitter I. each. 1.60 300.00 480.00
Mason I. each. 1.60 300.00 480.00
A 5725.00
Water Charges and sundries 1.00% on 5725.00 57.25
Overheads 7.5% on 5725.00 429.38
Add for contractors profit. 7.5% on 5725.00 429.38
C 6641.01
Contract tax 0.0% on C 0.00
6641.01
Rate for one Rs 6641.01
63 cm x 50 cm CAT NO
Details of cost of one sink.
Material Sink ( 63 cm x 50 ) each. 1.00 2542.00 2542.00
15mm CP pillar taps/bib cock. each. 1.00 525.00 525.00
CP chain with plug. Set. 1.00 38.00 38.00
CP waste pipe with fitting 32mm. each. 1.00 160.00 160.00
Lead or PVC connection. each. 1.00 5.00 5.00
Labour. Fitter I. each. 1.60 300.00 480.00
Mason I. each. 1.60 300.00 480.00
A 4230.00
Water Charges and sundries 1.00% on 4230.00 42.30
Overheads 7.5% on 4230.00 317.25
Add for contractors profit. 7.5% on 4230.00 317.25
C 4906.80
Contract tax 0.0% on C 0.00
4906.80
Rate for one Rs 4906.80
Page 186
BATH ROOM FITTINGS
Providing and fitting chromium plated toilet paper
24.17 holder i/c the making holes and fixed to wooden cleats
with CP screws washer etc. all complete:.
Details of cost for 1 No.
Material. Cost of paper holder each. 1.00 360.00 360.00
Labour. Fitter I. each. 0.05 300.00 15.00
Labour. each. 0.10 200.00 20.00
A 395.00
Water Charges and sundries 1.00% on 395.00 3.95
Overheads 7.5% on 395.00 29.63
Add for contractors profit. 7.5% on 395.00 29.63
C 458.21
Contract tax 0.0% on C 0.00
458.21
Rate for one Rs 458.21
Page 187
Add for contractors profit. 7.5% on 470.00 35.25
C 545.20
Contract tax 0.0% on C 0.00
545.20
Rate for one Rs 545.20
600x20mm
Material. Towel rail. each. 1.00 675.00 675.00
Wooden cleats. each. 2.00 1.00 2.00
25mm CP brass screw. each. 2.00 2.50 5.00
Labour: Carpenter I. each. 0.15 300.00 45.00
Other labour (helper). each. 0.15 200.00 30.00
A 757.00
Water Charges and sundries 1.00% on 757.00 7.57
Overheads 7.5% on 757.00 56.78
Add for contractors profit. 7.5% on 757.00 56.78
C 878.13
Contract tax 0.0% on C 0.00
878.13
Rate for one Rs 878.13
Page 188
25mm CP brass screw. each. 2.00 2.50 5.00
Labour: Carpenter I. each. 0.15 300.00 45.00
Other labour (helper). each. 0.15 200.00 30.00
A 492.00
Water Charges and sundries 1.00% on 492.00 4.92
Overheads 7.5% on 492.00 36.90
Add for contractors profit. 7.5% on 492.00 36.90
C 570.72
Contract tax 0.0% on C 0.00
570.72
Rate for one Rs 570.72
Page 189
Overheads 7.5% on 168.00 12.60
Add for contractors profit. 7.5% on 168.00 12.60
C 194.88
Contract tax 0.0% on C 0.00
Rate for one 194.88
Rate for one Rs 194.88
Page 190
Water Charges and sundries 1.00% on 267.00 2.67
Overheads 7.5% on 267.00 20.03
Add for contractors profit. 7.5% on 267.00 20.03
C 309.73
Contract tax 0.0% on C 0.00
Rate for one one Nos 309.73
Rs 309.73
100mm offsets.
Material: Offset. each. 1.00 442.00 442.00
Labour: Fitter I. each. 0.08 300.00 24.00
Other labour. each. 0.08 200.00 16.00
A 482.00
Water Charges and sundries 1.00% on 482.00 4.82
Overheads 7.5% on 482.00 36.15
Add for contractors profit. 7.5% on 482.00 36.15
C 559.12
Contract tax 0.0% on C 0.00
Rate for one 559.12
Say Rs 559.12
150mm offsets.
Material: Offset. each. 1.00 645.00 645.00
Labour: Fitter I. each. 0.08 300.00 24.00
Other labour. each. 0.08 200.00 16.00
A 685.00
Water Charges and sundries 1.00% on 685.00 6.85
Overheads 7.5% on 685.00 51.38
Add for contractors profit. 7.5% on 685.00 51.38
C 794.61
Contract tax 0.0% on C 0.00
Rate for one 794.61
Say 794.61
25 CARRAIGE: (Refer AOR Road works)
25.1 HEAD LOAD:
Head load of stock materials for a distance beyond 30
m and within 100 m
Assuming one labour carries 50kg. Load
Avg. speed = 2.00km/hrs. (33.33 mtr per minute)
Time consumed:
Lifting = 0.25 min
Travelling = 100m / 33.33 = 3.00 min
Unloading = 0.25min
Total = 3.50 min
0.05583 hrs
No.of trips per day =8/ 0.0583= 137.22 trips.
Quantity carried by one labour in a day =
137.22 x 50 / 100 =68.61 Qtls.
Quantity carried at 75% efficiency = 51.46 qtl
51.46 x 5 = 257.29 Qtls.
One labour is needer for loading/stacking every
5 labourers.
No. of labourers required for carrying
281.25 quintals, 5+1 =6 each 6.00 200.00 1200.00
A 1200.00
Water Charges and sundries 1.00% on 1200.00 12.00
Overheads 7.50% 1200.00 90.00
Contractor's profit. 7.50% 1200.00 90.00
C 1392.00
Contract Tax 0.00% on C 0.00
Rate for 257.29 qtl D 1392.00
Page 191
Rate per qtl, E 5.41
Page 192
Assuming one labour carries 1 cft. load
at a time, at 2 kmph speed (33.33 mtr/min)
Total dis. to be travelled both ways =100 m
Working hours = 8 hr, with 10 minute break for every
hour of work = 80 min (1.33 hr). Net hrs of work is [8-
1.33 =6.67 hr]
Avg. speed = 2km/hrs. (33.33 mtr per minute)
Time consumed:
Travelling = 1800m / 33.33 = 54 min
Total = 54.0 min
0.9 hrs
No.of trips per day =6.67/ 0.9= 7.40trips.
Quantity carried by one labour in a day
Quantity carried at 85% efficiency = 6.29 cft
6.29cft x 5 = 31.45 cft. = 0.8914 cum
No. of labourers required for carrying
0.8914 cum = 5 each 5.00 200.00 1000.00
A 1000.00
Water Charges and sundries 1.00% on 1000.00 10.00
Overheads 7.50% 1000.00 75.00
Contractor's profit. 7.50% 1000.00 75.00
C 1160.00
Contract Tax 0.00% on C 0.00
Rate for 0.8914 D 1160.00
Rate for 1 cum E 1301.32
Total 20 Min
a) Machinery
Tipper 5.5 tonnes capacity hour 0.330 450.00 148.50
Front end-loader 1 cum bucket capacity @ 25 hour 0.330 800.00 264.00
cum/hour
A 412.50
Water Charges and sundries 1.00% on 412.50 4.13
Overheads 7.50% 412.50 30.94
Contractor's profit. 7.50% 412.50 30.94
C 478.51
Contract Tax 0.00% on C 0.00
Rate for 5.5 cum D 478.51
Rate for 1 cum E 87.00
25.6 Loading and Unloading of Boulders by Manual Means
Unit = cum
Taking output = 5.5 cum
a) Labour
Mate day 0.110 300.00 33.00
Page 193
Mazdoor for loading and unloading day 0.750 200.00 150.00
b) Machinery
Tipper 5.5 tonne capacity hour 0.750 450.00 337.50
520.50
Water Charges and sundries 1.00% on 520.50 5.21
Overheads 7.50% 520.50 39.04
Contractor's profit. 7.50% 520.50 39.04
C 603.79
Contract Tax 0.00% on C 0.00
Rate for 5.5 cum D 603.79
Rate for 1 cum E 109.78
25.7 Loading and Unloading of Cement or Steel by Manual
Means and Stacking.
Unit = tonne
Taking output = 10 tonnes
a) Labour
Mate day 0.080 300.00 24.00
Mazdoor for loading and unloading day 2.000 200.00 400.00
b) Machinery
Truck 10 tonne capacity hour 2.000 450.00 900.00
1324.00
Water Charges and sundries 1.00% on 1324.00 13.24
Overheads 7.50% 1324.00 99.30
Contractor's profit. 7.50% 1324.00 99.30
C 1535.84
Contract Tax 0.00% on C 0.00
Rate for 10 MT D 1535.84
Rate for 1 MT E 153.58
25.8 Cost of Haulage Excluding Loading and Unloading
Page 194
Contractor's profit. 7.50% 481.50 36.11
C 558.54
Contract Tax 0.00% on C 0.00
Rate for 100 per t. Km D 558.54
Rate for 1 per t. Km E 5.59
(iii) Katcha Track and Track in River Bed/Nallah Bed and
Choe Bed.
Speed with load :10 km / hour
Speed while returning empty:15 km / hour
a) Machinery
Tipper 10 tonnes capacity
Time taken for onward haulage hour 1.000 450.00 450.00
Time taken for empty return trip hour 0.670 450.00 301.50
751.50
Water Charges and sundries 1.00% on 751.50 7.52
Overheads 7.50% 751.50 56.36
Contractor's profit. 7.50% 751.50 56.36
C 871.74
Contract Tax 0.00% on C 0.00
Rate for 100 per t. Km D 871.74
Rate for 1 per t. Km E 8.72
Page 195
4672.50 3947.50
Page 196
o
Page 197
600.99
Page 198
THEORETICAL CONSUMPTION OF MATERIALS
STONE cum Sand
Ref ITEMS UNIT Cement bags
Stone 40mm 20mm 12mm cum
5 FILLING WORKS
Stone filling in building works cum 0.85
Stone soling in buildings works cum 0.95
6 Cement Mortar
6.1 Cement mortar 1:1 cum 20.40 0.71
6.2 Cement mortar 1:2 cum 13.68 0.07
6.3 Cement mortar 1:3 cum 10.20 1.07
6.4 Cement mortar 1:4 cum 7.60 1.07
6.5 Cement mortar 1:5 cum 6.20 1.07
6.6 Cement mortar 1:6 cum 5.00 1.07
7 CEMENT CONCRETE: (cast in situ)
7.1 Cement Concrete
10.12 Solid Block in 1:4 c.m with Recron 3S sqm 0.787 0.091 0.031 0.091
11 FLOORING WORKS
11.1
18mm thick 30 cm height cement plaster
skirting with cement mortar 1:3 finished sqm 0.281 0.025
with a floating coat of neat cement
11.2
21mm thick 30 cm height cement plaster
skirting with cement mortar 1:3 finished sqm 0.315 0.029
with a floating coat of neat cement
12.10.1 45cm height, 30 cm top and 45 cm bottom Rm 0.711 0.084 0.057 0.019 0.062
12.10.2 60cm height, 45 cm top and 60cm bottom Rm 1.260 0.158 0.106 0.035 0.106
13 DRAINAGE
13.1 V' shaped drain with cement pointing in
Rm 0.045 0.169 0.005
1:4 cement mortar
13.2 Box Drain of 30 cm (ht) x 45 cm (width)
Rm 1.156 0.229 0.156 0.053 0.104
with 1:2:4 Plum concrete
13.3
Box Drain of 60 cm (ht) x 45 cm (width)
Rm 1.664 0.309 0.209 0.070 0.140
with 1:2:4 Plum concrete (20mm & down)
0.89
0.94
0.89
0.85
0.89
0.036
0.036
0.945 0.445
0.445 0.235
1.197
1.170
1.170 0.330
0.220 0.105
SCHEDULE OF RATES - 2012
2 PREPARATORY WORKS
2.1 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and sqm
saplings of girth upto 30 cm measured at a height of 1 m above ground level and
removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
2.2 Clearing grass and removal of the rubbish upto a distance of 50 m outside the sqm
periphery of the area cleared.
3 EARTH WORK IN HILL CUTTING WORKS:
3.1 Excavation in Hill Area in Soil by Mechanical Means in
3.1.1 Excavation in soil in hilly area by mechanical means including cutting and trimming cum
of side slopes and disposing of excavated earth with all lifts and lead up to 1000
meters.
3.1.2 In case the land on the valley side is barren and there is no objection for disposing of cum
excavated earth on the valley side, the provision of front end loader and tipper shall
be deleted as excavated earth shall be disposed off on the valley side.
3.2 Excavation in Hill Area in Soil by Manual Means
3.2.1 Excavation in soil in hilly area by manual means including cutting and trimming of cum
side slopes and disposing of excavated earth with all lifts and lead upto 50 meters.
3.2.2 In case the land on the valley side is barren and there is no objection for disposing of cum
excavated earth on the valley side, the provision of front end loader and tipper shall
be deleted as excavated earth shall be disposed off on the valley side.
3.3 Excavation in Hilly Area in Ordinary Rock by Mechanical Means not Requiring cum
Blasting.
3.3.1 Excavation in hilly area in ordinary rock not requiring blasting by mechanical means cum
including cutting and trimming of slopes and disposal of cut material with all lift and
lead upto 1000 meters.
3.3.2 In case the land on the valley side is barren and there is no objection for disposing of cum
excavated earth on the valley side, the provision of front end loader and tipper shall
be deleted as excavated earth can be disposed off on the valley side.
3.4 Excavation in Hilly Area in Ordinary Rock by Manual Means not Requiring
3.4.1 Blasting.
Excavation in hilly area in ordinary rock not requiring blasting by Manual means cum
including cutting and trimming of slopes and disposal of cut material with all lift and
lead upto 50 meters.
3.4.2 In case the land on the valley side is barren and there is no objection for disposing of cum
excavated earth on the valley side, the provision of front end loader and tipper shall
be deleted as excavated earth can be disposed off on the valley side.
3.5 Excavation in Hilly Areas in Hard Rock Requiring Blasting
3.5.1 Excavation in hilly areas in hard rock requiring blasting, by mechanical means cum
including trimming of slopes and stacking of cut material with all lifts and lead upto
50 meters.
3.5.2 Excavation in hilly areas in hard rock requiring blasting, by Manual means including cum
trimming of slopes and collection of 40% of cut material and disposal of rest of the
materials with all lifts and lead upto 50 meters.
4.3 Excavation work by mechanical means (Hydraulic Excavator)/ manual means in cum
foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan
including dressing of sides and ramming of bottoms lift upto 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soils as directed,
within a lead of 50m. Hard rock (requiring blasting)
4.4 Excavation work by mechanical means (Hydraulic Excavator)/ manual means in cum
foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan
including dressing of sides and ramming of bottoms lift upto 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soils as directed,
within a lead of 50m. Hard rock (blasting prohibited)
4.5 Extra for every additional lift of 1.5 m or part thereof in (All kinds of soil).
4.6 Extra for every additional lift of 1.5 m or part thereof in (Ordinary or hard rock).
5 FILLING WORKS
5.1 Filling inside plinth in building works with 23cm layers, consolidated to 15cm cum
including watering, ramming etc, all complete.
5.2 Filling with available excavated earth in trenches, plinth and side of foundation in cum
building works with layers not exceeding 20cm in depth including consolidation of
each layer by ramming, watering etc, all complete.
5.3 Sand filling in building works in layer not exceeding 20cum including watering, cum
ramming etc, all complete.
5.4 Providing and laying hand packed stone filling in building works with clean hard cum
selected stones, all complete.
5.5 5.5.1 Providing and laying hand packed stone soling in buildings works with clean hard Cum
selected stones, all complete. (Manual means)
Providing and laying hand packed stone soling in buildings works with clean hard Cum
selected stones, all complete. (Mechanical means)
5.5.2
CEMENT CONCRETE
6 CEMENT MORTAR
Providing and laying cement mortar in specified mix including curing etc. all
complete:
6.1 Cement mortar 1:1 (1cement: 1clean coarse sand) cum
6.2 Cement mortar 1:2 (1cement, 2 clean coarse sand). cum
6.3 Cement mortar 1:3 (1cement, 3 clean coarse sand). cum
6.4 Cement mortar 1:4 (1cement, 4 clean coarse sand). cum
6.5 Cement mortar 1:5 (1cement, 5 clean coarse sand). cum
6.6 Cement mortar 1:6 (1cement, 6 clean coarse sand). cum
7 CEMENT CONCRETE: (cast in situ)
7.1 Providing and Laying in position cement concrete of specified grade including
7.1.1 compacting curing1coarse
1:1:2 (1cement, etc all sand,
complete.
2 graded stone aggregate of 20mm nominal size) cum
7.1.2 1:1.5:3 (1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm & down size) cum
7.1.3 1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down cum
7.1.4 size)
1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregate of 40mm & down cum
7.1.5 size)
1:3:6 mix. (1 cement, 3 coarse sand, 6 stone aggregate of 20mm & down size) cum
7.1.6 1:3:6 mix. (1 cement, 3 coarse sand, 6 stone aggregate of 40mm & down size) cum
7.1.7 1:4:8 mix. (1 cement, 4 coarse sand, 8 stone aggregate of 40mm & down size) cum
7.1.8 1:5:10 mix.(1cement, 5 coarse sand, 10 stone aggregate of 40mm & down size) cum
7.2 Providing & Laying in position cement concrete of specified grade including
compacting curing etc all complete with Recron 3S of fiber length 6 or 12 mm (125
gm of recron 3S per a bag of cement) as per the direction of Engineer in Charge.
7.2.1 1:1:2(1cement, 1coarse sand, 2 graded stone aggregate of 20mm nominal size) cum
7.2.2 1:1.5:3 (1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm & down size) cum
7.2.3 1:2:4 mix.(1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size) cum
7.2.4 1:2:4 mix.(1 cement, 2 coarse sand, 4 graded stone aggregate of 40mm & down size) cum
7.2.5 1:3:6 mix.(1 cement, 3 coarse sand, 6 stone aggregate of 20mm & down size) cum
7.2.6 1:3:6 mix.(1 cement, 3 coarse sand, 6 stone aggregate of 40mm & down size) cum
7.2.7 1:4:8 mix. (1 cement, 4 coarse sand, 8 stone aggregate of 40mm & down size) cum
7.2.8 1:5:10 mix.(1cement, 5 coarse sand, 10 stone aggregate of 40mm & down size) cum
7.3 Providing and Laying damp proof coarse 40 mm thick with cement concrete 1:2:4 sqm
( 1 cement, 2 Clean coarse sand, 4 graded stone aggregate 12.5 mm & nominal size)
as per the direction of Engineer in Charge.
7.4 Providing and Laying damp proof course 40 mm thick with cement concrete 1:2:4 sqm
( 1 cement, 2 Clean course sand, 4 graded stone aggregate 12.5 mm nominal size)
with Recron 3S of fiber length 6 or 12 mm (125 gm of recron 3S per a bag of
cement) as per the direction in Engineer in Charge.
8 REINFORCED CEMENT CONCRETE CAST IN SITU
8.1 Providing and Laying in position specified grade of reinforced cement concrete
excluding the cost of form work, finishing and reinforcements.
8.1.1 1:1:2 ( 1 cement: 1 coarse sand : 2 graded stone aggregate 20mm and down nominal cum
gauge size)
8.1.2 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down cum
nominal gauge)
8.1.3 1:2:4 (1cement,2coarse sand, 4 graded stone aggregate of 20mm nominal size). cum
8.2 Providing & Laying in position specified grade of reinforced cement concrete of
nominal mix excluding the cost of form work, finishing & reinforcements with
Recron 3S of fiber length 6 or 12 mm (125 gm of recron 3S per a bag of cement) as
per the direction of Engineer in Charge.
8.2.1 1:1:2 ( 1 cement: 1 coarse sand : 2 graded stone aggregate 20mm and down nominal cum
gauge size)
8.2.2 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down cum
nominal gauge)
8.2.3 1:2:4 (1cement,2coarse sand, 4 graded stone aggregate of 20mm nominal size). cum
9 CEMENT PLASTER WORKS:
9.1 Providing and Laying 12mm thick cement plaster of specified mix in single coat
including finishing even and smooth and curing complete.
9.1.1 1:3 Mix sqm
9.1.2 1:4 mix. sqm
9.1.3 1:5 Mix sqm
9.1.4 1:6 Mix. sqm
9.2 Providing and Laying 15mm thick cement plaster of specified mix in single coat
including finishing even and smooth and curing etc all complete.
9.2.1 1:3 Mix sqm
9.2.2 1:4 mix. sqm
9.2.3 1:5 Mix sqm
9.2.4 1:6 Mix. sqm
9.3 Providing and Laying 20mm thick cement plaster of specified mix in single coat
including finishing even and smooth and curing etc all complete.
9.3.1 1:3 Mix sqm
9.3.2 1:4 mix. sqm
9.3.3 1:5 Mix sqm
9.3.4 1:6 Mix. sqm
9.4 Providing and Laying 12mm thick cement plaster of specified mix with Recorn 3S
having a fiber length of 4.8 mm ( 100 gm / bag of cement) in single coat including
finishing even and smooth and curing complete .
9.4.1 1:3 Mix sqm
9.4.2 1:4 mix. sqm
9.4.3 1:5 Mix sqm
9.4.4 1:6 Mix. sqm
9.5 Providing and Laying 15mm thick cement plaster of specified mix with Recorn 3S
having a fiber length of 4.8 mm ( 100 gm / bag of cement) in single coat including
finishing even and smooth and curing etc all complete.
9.5.1 1:3 Mix sqm
9.5.2 1:4 mix. sqm
9.5.3 1:5 Mix sqm
9.5.4 1:6 Mix. sqm
9.6 Providing and Laying 20mm thick cement plaster of specified mix with Recorn 3S
having a fiber length of 4.8 mm (100 gm / bag of cement) in single coat including
finishing even and smooth and curing etc all complete.
9.6.1 1:3 mix. sqm
9.6.2 1:4 mix. sqm
9.6.3 1:5 Mix sqm
9.6.4 1:6 Mix. sqm
9.7 Extra for plastering exterior walls of height more than 10m from G.L. for every sqm
additional height of 3m or part thereof.
9.8 POINTING ON BRICKS / STONE WORKS
9.8.1 Pointing on bricks works with 1:3 mix cement mortar (1 cement, 3 fine sand) sqm
9.8.2 (Pointing
Raised or
oncut pointing)
stone works with 1:3 mix cement mortar (1 cement, 3 fine sand) sqm
(raised or cut pointing)
9.10. FINISHING
9.10. Providing and laying plaster of paris putty of 2mm thick over plastered surface to sqm
1 prepare the surface even and smooth all complete:
11 FLOORING WORKS
11.1 Providing and Laying of 18mm thick 30 cm height cement plaster skirting with sqm
cement mortar 1:3 (1cement,3coarse sand) finished with a floating coat of neat
cement including rounding of junctions and curing complete.
11.2 Providing and Laying of 21mm thick 30 cm height cement plaster skirting with sqm
cement mortar 1:3 (1cement,3coarse sand) finished with a floating coat of neat
cement including rounding of junctions and curing complete.
11.3 Providing and Laying 40 mm thick in 1:2:4 c.c. (1cement, 2 coarse sand, 4 stone sqm
aggregate of size 12.5mm and down )flooring with floating coat of neat cement to
give a smooth surface in not exceeding 02 sqm. including cost of glass strips and
curing etc with complete in all building floors wherever specified.
11.4 Providing and Laying 40 mm thick with Recorn 3S polyester fiber of specified sqm
length (anti seepage / cracking) in 1:2:4 c.c. (1cement, 2 coarse sand, 4 stone
aggregate of size 12.5mm and down )flooring with floating coat of neat cement to
give a smooth surface in not exceeding 02 sqm. including cost of glass strips and
curing etc with complete in all building floors wherever specified.
11.5 Providing and Laying 40 mm thick Ironite flooring in 1:2:4 c.c. (1cement, 2coarse sqm
sand,4 stone aggregate of size 12.5mm and down )flooring with floating coat of
neat cement to give a smooth surface in not exceeding 02 sqm. including cost of
glass strips and curing etc all complete in all building floors wherever specified.
11.6 Providing and Laying 40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4 stone sqm
aggregate of size 12.5mm and down )flooring with floating coat of neat cement to
give a smooth surface in not exceeding 02 sqm. (without glass strip) curing etc
complete in all building floors wherever specified.
11.7 Extra for making chequers of approved pattern in C.C floors over item No.13.3 sqm
11.8 Providing and Laying 18mm thick with under layer of 12mm thick cement plaster sqm
1:3 red oxide plaster skirting up to 30cm height with top layer of 6mm thick plaster
of cement Red oxide mix c.m. 1:3 using 3.5kg red oxide of iron per 50kg of cement
finished with a floating coat of neat similar cement red oxide mix including
rounding of junctions and curing complete.
11.9 Providing and Laying 21mm thick with under layer of 15mm thick cement plaster sqm
1:3 red oxide plaster skirting up to 30cm height with top layer of 6mm thick plaster
of cement Red oxide mix 1:3 c.m using 3.5kg red oxide of iron per 50kg of cement
finished with a floating coat of neat cement including rounding of junctions and
curing complete.
11.1 Providing and Laying. 40 mm thick Red oxide flooring with under layer 30mm thick sqm
c.c. 1:2:4 and top layer of 10mm thick plaster of red oxide and cement mix cement
mortar 1:3 finished with a floating coat of neat similar cement red oxide mix
including cement slurry, rounding of junction all complete:
11.1 Providing and laying. 40mm thick mosaic flooring dark shade with ordinary cement sqm
rubbed and polished with under layer of c.c. 1:2:4 (1cement, 2coarse sand, 4graded
stone aggregate of 12.50mm size) and 6mm top layer of marble chips laid in cement
marble powder mix 3:1 (3cement, 1marble powder) by weight in proportion of 4:7
(4 cement marble powder mix: 7 marble chips) by volume including cement slurry,
pigment, curing etc. complete.
11.1 Providing and laying. 18mm thick (up to 30 cm high) marble chips skirting (light sqm
shade), rubbed and polished of top layer 6mm thick marble chips of size 1mm to
4mm nominal size laid in cement marble powder mix 3:1 (3cement, 1marble
powder) by weight in proportion of 4:7(4cement marble powder mix, 7marble chips)
by volume including rounding the edges, curing etc complete.
11.2 Providing and Laying. 21mm thick (up to 30 cm high) marble chips skirting (light sqm
shade), rubbed and polished of top layer 6mm thick marble chips of size 1mm to
4mm nominal size laid in cement marble powder mix 3:1 (3cement, 1marble
powder) by weight in proportion of 4:7(4cement marble powder mix, 7marble chips)
by volume including rounding the edges, curing etc complete.
11.2 Extra for providing and fixing glass strips in joints of marble chips / Cement sqm
concrete floors.
11.2 Extra for laying terroza flooring on stair case treads not below 30 cm in width sqm
including cost of forming, nosing etc.
11.2 Providing and Laying flooring with marble stone slabs flooring of size not less than sqm
1.0 sqm of 20mm thick laid over 20mm(average)1:4cm thick bare laid cement
concrete and joint treated with white cement, mixed with matching pigment, curing
including rubbing to give a granite finish, as per the direction of Engineer in Charge
and carriage of material up to work site, all complete (Zebra black marble or
equivalent)
11.2 Providing and Laying marble stone slabs 20mm thick marble stone slabs flooring of sqm
size not less than 1.0 sqm of 20mm thick laid over 20mm(average)1:4cm thick bare
laid cement concrete and joint treated with white cement, mixed with matching
pigment, curing including rubbing to give a granite finish, as per the direction of
Engineer in Charge and carriage of material up to work site, all complete (Raj agar
11.2 Providing and Laying flooring with granite marble stone slabs 20mm thick granite sqm
stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 20mm
(average) 1:4cm thick bare laid cement concrete and joint treated with white cement,
mixed with matching pigment, curing including rubbing to give a granite finish, as
per the direction of Engineer in Charge and carriage of material up to work site, all
11.2 Extra for marble stone flooring for treads of steps. RM
11.2 Extra for nosing in marble stone for treads. RM
11.2 Providing and Laying 20mm thick marble stone in Risers of steps, skirting and sqm
pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 and joint treated with white
cement, mixed with matching pigment, curing including rubbing to give a granite
finish, as per the direction of Engineer in Charge and carriage of material up to work
site, all complete (Zebra black marble or equivalent)
11.2 Providing and Laying 20mm thick marble in Risers of steps, skirting and pads, sqm
walls, pillars etc laid on 10mm thick base c.m. 1:3 and joint treated with white
cement, mixed with matching pigment, curing including rubbing to give a granite
finish, as per the direction of Engineer in Charge and carriage of material up to work
site, all complete (Raj agar Plain Marble / Udaipur green marble or equivalent)
11.3 Providing and Laying 20mm thick granite stone in Risers of steps, skirting and pads, sqm
walls, pillars etc laid on 10mm thick base c.m. 1:3 joint treated with white cement,
mixed with matching pigment, curing including rubbing to give a granite finish, as
per the direction of Engineer in Charge and carriage of material up to work site, all
complete.
11.3 Providing and Laying. 25mm thick kota stone slab flooring over 20mm thick 1:4 cm sqm
base laid and jointed with grey cement slurry mixed with pigment to match the
shade of the slab including cutting, rubbing and polishing complete.
11.3 Providing and Laying kota stone slabs 25mm thick in Risers of steps, skirting dado sqm
and walls laid on 12mm thick (average) thick base of c.m. 1:3 (1 cement, 3 coarse
sand) and jointed with grey cement slurry mixed with pigments to match the shade
of the slab including cutting, rubbing and polishing complete.
11.3 Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or sqm
equivalent colour in flooring, treads of steps landing etc laid on a bed of 15mm, cm
1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
11.3 Providing and Laying white or colored glazed vitrified tiles of classic colour or sqm
equivalent in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3
(1cement, 3coarse sand) finished with flush pointing with white cement slurry.
11.3 Providing and Laying white or colored glazed vitrified tiles Pearl (white, sqm
marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing
etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush
pointing with white cement slurry.
11.3 Providing and Laying white or colored glazed tiles of size 200mm x 300mm of sqm
plain/normal prints colours (white, grey, ivory, platinum, cream, glacier white,
summers and, beach, wood duro, melody, or equivalent) in skirting, risers of steps
and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and
jointed with white cement slurry.
11.3 Providing and Laying Chequers tiles in on flooring over 12mm thick cement plaster sqm
(1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
11.3 Providing and Laying white or colored or ceramic glazed tiles of size 200mm x sqm
300mm luster printed ( loreno, bronzo, colubia or equivalent) in skirting, risers of
steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare
and jointed with white cement slurry.
11.3 Providing and Laying white or colored or ceramic glazed tiles of size 200mm x sqm
300mm Special colour(black, burgundy, pink, midnight blue, alpine blue or
equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster
(1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
11.4 Providing and Laying plain colored glazed ceramic tiles of size 300mm x 300mm in sqm
plain colours (white, grey, ivory platinum, leather brown etc or equivalent), on
floors landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished
with flush pointing with white cement slurry.
11.4 Providing and Laying colored glazed tiles of special colour( black, sorrento, maroon, sqm
cotto, kota green, sand dune, fume colour, droplets etc. or equivalent) in flooring,
treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3
(1cement, 3coarse sand) finished with flush pointing with white cement slurry.
11.4 Providing and Laying white or colored glazed tiles anti skid ( elegant, cashmere, sqm
Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant
or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid
on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with
white cement slurry.
11.4 Providing & Laying 40 mm thick Red oxide flooring with Recorn 3S polyester fiber sqm
(anti seepage/cracking) under layer 30mm thick c.c. 1:2:4 and top layer of 10mm
thick plaster of red oxide and cement mix cement mortar 1:3 finished with a floating
coat of neat similar cement red oxide mix including cement slurry, rounding of
edges and junctions, strips and curing etc, all etc complete.
12 MASONRY WORKS
12.1 Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean cum
hard graded stone chips of 20 mm down nominal gauge) with 50% clean hard stone
of sizes not exceeding 15cm including shuttering, compacting and curing complete,
as per the direction of Engineer in Charge.
12.2 Providing and Laying Plum concrete in 1:4:8 c.c. (1cement, 4 coarse sand, 8 clean cum
hard graded stone chips of 40 mm down nominal gauge) with 50% clean hard stone
of sizes not exceeding 15cm including shuttering, compacting and curing complete,
as per the direction of Engineer in Charge.
12.3 Providing and laying Hand Packed wall with clean hard selected stone including cum
centering aligning and slopes/curves etc, complete as per the direction of Engineer in
Charge.
12.4 Providing and Laying Random Rubble Stone Masonry wall with hammer dressed cum
with bond stone, through stone of size 150mm x 150mm x 450mm manufactured in
1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and
down) clean hard selected stone, including centering aligning and slopes/curves etc,
complete as per the direction of Engineer in Charge
12.5 Gabian Structure for Retaining Earth (Providing and construction of a gabain structure for cum
retaining earth with segments of wire crates of size 7 m x 3 m x 0.6 m each divided into 1.5 m
compartments by cross netting, made from 4 mm galvanised steel wire @ 32 kg per 10sqm
having minimum tensile strength of 300 Mpa conforming to IS:280 and galvanizing coating
conforming to IS:4826, woven into mesh with double twist, mesh size not exceeding 100 x
100 mm, filled with boulders with least dimension of 200 mm, all loose ends to be tied with 4
12.6 Providing and Laying Random Rubble Stone Masonry in 1:3:6 c.c. (1 cement, 3 cum
sand, 6 clean hard graded stone chips, size 40mm gauge) including bond stone,
through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4
clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down) and curing
etc, complete as per the direction of Engineer in Charge, excluding the cost of
12.7 Providing and Laying. Random Rubble Stone Masonry in 1:4:8 c.c. (1cement, 4 cum
sand, 8 clean hard graded stone chips of 40 mm nominal gauge) including bond
stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8
(1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and
down), curing etc , complete as per the direction of Engineer in Charge excluding
the cost of carriage of materials.
12.8 Providing and laying. coarse Rubble Stone Masonry with hammer dressed clean cum
hard selected stone in 1:3:6c.c. (1 cement, 3 sand, 8 clean hard graded stone ships of
size 40mm) including bond stone, through stone of size 150mm x 150mm x 450mm
manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of
size 40 mm and down) and curing etc, complete as per the direction of Engineer in
12.9 Providing and laying. coarse Rubble Stone Masonry in 1:4:8 c.c. ( 1 cement, 4 sand, cum
8 clean hard graded stone chips of size 40mm and down) including bond stone,
through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4
clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down), and
curing etc, complete as per the direction of Engineer in Charge excluding the cost of
12.1 Providing and laying. Chisel Dressed Stone Masonry with chisel dressed clean hard cum
selected stone in 1:5 Cement Mortar (1cement, 5 coarse sand) including centering,
lining and curing etc as per the direction of Engineer in Charge, all complete.
12.1 Providing and laying parapet of standard size on 1:2:4 (1cement, 2coarse sand,
4clean hard graded stone chips of 20 mm down nominal gauge) plum concrete and
plastering with 1:4 mix cement mortar of 12mm thick with recron 3S with lime
washing three or more coats, complete as per the direction of the Engineer- in-
12.11.1 45cm height, 30 cm top and 45 cm bottom RM
12.11.2 60cm height, 45 cm top and 60cm bottom RM
13 DRAINAGE
13.1 Providing standard 'V' shaped drain with hammer dressed clean hard selected stones RM
and finished with cement pointing in 1:4 cement mortar including curing etc
complete, as per the direction of the Engineer in Charge.
13.2 Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 RM
Plum concrete (20mm & down) in side walls thickness of 23 cm (hill side) and 30
cm (road side) and 1:3:6 (20 mm & down) base concrete of thickness of 15 cm
with standard specification over 15 cm stone soling including providing & laying
guard stones complete, as per the direction of the Engineer in Charge.
13.3 Providing box drain of 60 cm (ht) x 45 cm (width) of internal dimension with 1:2:4 RM
Plum concrete (40mm & down) side wall thickness of 23 cm (hill side) and 30 cm
(road side) with1:3:6 (20 mm & down) base concrete of thickness of 15 cm with
standard specification over 15 cm stone soling including providing & laying guard
stones, complete as per the direction of the Engineer-in-Charge.
13.4 Providing U shaped drain of 23cm (ht) x 23 cm (width) of internal dimension with RM
1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm on both side with
1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard
specification over 15 cm stone soling including 1:3 cement plaster with neat cement
polishing & rounding of junction, as per the direction of the Engineer in Charge.
13.5 Providing and laying Hume pipe semicircular drain 23 cm internal dimension 1:2:4 RM
Plum concrete (40mm & down) side wall thickness of 23 cm (hill side) and 30 cm
(road side) with1:3:6 (20 mm & down) base concrete of thickness of 75mm with
standard specification over 15 cm stone soling including providing & laying guard
stone complete as per the direction of Engineer in Charge.
13.6 Providing and laying standard 'V' shaped drain with cement concrete base in 1:2:4 (1 RM
cement, 2 clean coarse sand, 4 stone chips 20mm and down) mix of 100mm thick
over clean hard selected stones soling of 150mm thick and 1:2:4 (1 cement, 2 clean
coarse sand, 4 stone chips 40mm and down) mix plum concrete along the vertical
side of thickness 150mm and depth 450mm including curing, compacting, as per the
14 FORM WORK:
14.1 Providing, fixing & removing form work for casting R.C.C items as indicated
below: with imported timber from outside the state)
14.1.1 Beam, lintels, girders, bresumers and cantilevers. sqm
14.1.2 Foundation, footings, base of column etc for mass concrete. sqm
14.1.3 Wall sqm
14.1.4 Floor slab, roof slab, landing, balcony and access platform. sqm
14.1.5 Circular columns sqm
14.1.6 Square columns sqm
14.2 Providing, fixing & removing form work for casting R.C.C items as indicated
below: with locally available timber)
14.2.1 Beam, lintels, girders, brersumers and cantilevers. sqm
14.2.2 Foundation, footings, base of column etc for mass concrete. sqm
14.2.3 Wall sqm
14.2.4 Floor slab, roof slab, landing, balcony and access platform. sqm
14.2.5 Circular columns sqm
14.2.6 Square columns sqm
15.1 Providing / Fitting / Fixing in position suspended exposed grid false ceiling using E- sqm
Board pearl (tested for inflammability as per IS 11871)& E- Grid of grid size 1200 x
600 x/600 x 600 mm with main runners 39 x 24.7 mm cross Tee 29 x 24.7mm and
wall angle 22.2 x 22.2 mm placing 4mm thick E-Board pearl in the grid of E-Grid
duly suspended with 4mm dia GI bars hangers fixed with tee dash fastener of fro
purlin of the roof with butterfly clips & hold down clips, providing provision for
light fixtures air conditioning diffuser and ducts, sprinklers, smoke, detectors i/c
paintings water based acrylic cement primer etc all complete:
16 DOORS AND WINDOWS:
16.1 Providing fitting and fixing in position of fully paneled shutters in windows and
doors of champ timber or equivalent including steel butt hinges screws 12mm thick
panels etc complete.
16.1.1 30mm thick panel door sqm
16.1.2 32mm thick panel door sqm
16.1.3 35mm thick panel door sqm
16.1.4 40mm thick panel door sqm
16.1.5 45mm thick panel door sqm
16.1.6 50mm thick panel door sqm
16.2 P/F/F in position of fully glazed shutters in windows and doors of champ wood or
equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or
equivalent etc complete.
16.2.1 30mm sqm
16.2.2 32mm sqm
16.2.3 35mm sqm
16.2.4 40mm sqm
16.2.5 45mm sqm
16.2.6 50mm sqm
16.3 P/F/F of half paneled and half glazed (4 mm thick water proof ply of modi guard or
equivalent) as per the thickness specified using champ wood or equivalent including
steel butt hinges with necessary screws complete.
16.3.1 30mm sqm
16.3.2 32mm sqm
16.3.3 35mm sqm
16.3.4 38mm sqm
16.3.5 45mm sqm
16.3.6 50mm sqm
16.4 Providing, fitting and fixing water proof flush door shutters, solid block hard core
construction with frame of 1st class hard timber with well matched 3mm teak ply
decorative type on one faces of the shutters including hinges with screws complete.
16.7 Providing and fixing of 12mm thick and 100mm wide pelmets with (25mm dia.) RM
curtain' rods and brackets including fixing with (25x3)mm M.S flat 10cm long and
plugs etc. complete in champ timber or equivalent with necessary screws/nails.
16.8 Providing fitting fixing Fibre Glass reinforced plastic door frames of cross section RM
90 x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm
thickness. . The laminate shall be moulded with fire retardant grade unsaturated
polyester resin and chopped Mat. Doorframe laminate shall be 2 mm thick and shall
be fitted with suitable wooden blocks in all the three legs. The frame shall be
covered with fibre glass from all sides. MS stay shall be provided at the bottom to
steady the frame.
16.9 Providing and fixing to existing door shutter 30 mm thick Glass Fibre Reinforced sqm
Polyester (FRP) paneled door shutter of required colour and approved brand and
manufacture, made with fire-retardant grade unsaturated polyester resin, moulded to
3 mm thick FRP laminate for forming hollow rails and styles, with wooden blocks of
seasoned wood inside at required placed for fixing and fittings, cast monolithically
with 5 mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS
16.1 14856-2000 including
Providing fitting fixingfixing
FibretoGlass
frames.
reinforced plastic door frames of cross section RM
150 x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm
thickness. . The laminate shall be moulded with fire retardant grade unsaturated
polyester resin and chopped Mat. Doorframe laminate shall be 2 mm thick and shall
be fitted with suitable wooden blocks in all the three legs. The frame shall be
covered with fibre glass from all sides. MS stay shall be provided at the bottom to
steady the frame.
16.1 Providing and fixing to existing door shutter 35 mm thick Glass Fibre Reinforced sqm
Polyester (FRP) paneled door shutter of required colour and approved brand and
manufacture, made with fire-retardant grade unsaturated polyester resin, moulded to
3 mm thick FRP laminate for forming hollow rails and styles, with wooden blocks of
seasoned wood inside at required placed for fixing and fittings, cast monolithically
with 5 mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS
14856-2000 including fixing to frames.
16.1 Providing and fixing to existing door shutter 40 mm thick Glass Fibre Reinforced sqm
Polyester (FRP) paneled door shutter of required colour and approved brand and
manufacture, made with fire-retardant grade unsaturated polyester resin, moulded to
3 mm thick FRP laminate for forming hollow rails and styles, with wooden blocks of
seasoned wood inside at required placed for fixing and fittings, cast monolithically
with 5 mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS
14856-2000 including fixing to frames.
16.1 Providing and fixing to existing door shutter 30 mm thick Glass Fibre Reinforced sqm
Polyester (FRP) Flush door shutter of required colour and approved brand and
manufacture, made with fire-retardant grade unsaturated polyester resin, moulded to
3 mm thick FRP laminate all around, with wooden blocks inside at required places
for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as
filler material throughout the hollow panel, cast monolithically with testing
parameters of F.R.P. laminate conforming to table - 3 of IS:14856:2000 complete as
per direction of Engineer-in-charge. of seasoned wood inside at required placed for
16.1 Providing and fixing to existing door shutter 35 mm thick Glass Fibre Reinforced sqm
Polyester (FRP) Flush door shutter of required colour and approved brand and
manufacture, made with fire-retardant grade unsaturated polyester resin, moulded to
3 mm thick FRP laminate all around, with wooden blocks inside at required places
for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as
filler material throughout the hollow panel, cast monolithically with testing
parameters of F.R.P. laminate conforming to table - 3 of IS:14856:2000 complete as
per direction of Engineer-in-charge. of seasoned wood inside at required placed for
fixing and fittings.
16.2 Providing and fixing to existing door shutter 40 mm thick Glass Fibre Reinforced sqm
Polyester (FRP) Flush door shutter of required colour and approved brand and
manufacture, made with fire-retardant grade unsaturated polyester resin, moulded to
3 mm thick FRP laminate all around, with wooden blocks inside at required places
for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as
filler material throughout the hollow panel, cast monolithically with testing
parameters of F.R.P. laminate conforming to table - 3 of IS:14856:2000 complete as
per direction of Engineer-in-charge. of seasoned wood inside at required placed for
16.2 Providing fitting fixing Fibre Glass reinforced Polyester (FRP) Windows Shutter of RM
cross section 75 mm x 30 mm. The laminate shall be moulded with fire retardant
grade unsaturated polyester resin and chopped Mat. Window shutter laminate shall
be 2 mm thick and shall be fitted with suitable wooden blocks.
16.2 Providing fitting fixing Fibre Glass reinforced Polyester (FRP) Windows Shutter of RM
cross section 75 mm x 35 mm. The laminate shall be moulded with fire retardant
grade unsaturated polyester resin and chopped Mat. Window shutter laminate shall
be 2 mm thick and shall be fitted with suitable wooden blocks.
16.2 Providing fitting fixing Fibre Glass reinforced Polyester (FRP) Windows Shutter of RM
cross section 75 mm x 40 mm. The laminate shall be moulded with fire retardant
grade unsaturated polyester resin and chopped Mat. Window shutter laminate shall
be 2 mm thick and shall be fitted with suitable wooden blocks.
16.2 Providing fitting fixing Fibre Glass reinforced polyester (FRP) Window frames of RM
cross section 90 x 45 mm having single rebate of 32 mm x 15 mm to receive shutter
of 30 mm thickness. . The laminate shall be moulded with fire retardant grade
unsaturated polyester resin and chopped Mat. Doorframe laminate shall be 2 mm
thick and shall be fitted with suitable wooden blocks.
16.2 Providing fitting fixing Fibre Glass reinforced polyester (FRP) Window frames of RM
cross section 90 x 45 mm having double rebate of 32 mm x 15 mm to receive shutter
of 30 mm thickness. . The laminate shall be moulded with fire retardant grade
unsaturated polyester resin and chopped Mat. Doorframe laminate shall be 2 mm
thick and shall be fitted with suitable wooden blocks.
16.2 Providing fitting fixing Fibre Glass reinforced polyester (FRP) Window frames of RM
cross section 150 x 45 mm having double rebate of 32 mm x 15 mm to receive
shutter of 30 mm thickness. . The laminate shall be moulded with fire retardant
grade unsaturated polyester resin and chopped Mat. Doorframe laminate shall be 2
mm thick and shall be fitted with suitable wooden blocks.
17.2 Providing and fixing spring hinges double action with necessary screws of 100mm Each
size of M.S all complete.
STEEL
18 Supplying/Bending, Binding of Steel
18.1 Supplying, bending and placing in position mild steel (6mm dia.) including Qtl
straightening, cutting, bending and placing in position including binding wire
complete.
18.2 Supplying, bending and placing in position tor- steel reinforcement in all R.C.C Qtl
works including cost of binding wires, all complete.
19 ROOFING WORKS
19.1 Providing, fitting, fixing of 24 BWG GCI sheet roofing with lapping of 150mm (two sqm
corrugation) with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet
washers filled with white bad including coat of approved steel primer and two coats
of approved paint, on overlapping of sheet excluding carriage all complete.
19.2 Providing, fitting, fixing of 24 BWG GP sheet roofing by making corrugation of sqm
50mmx50mm x50mm on both side with G.I. hooks, bolts and nut 8mm dia with
bitumen, GI limpet washers filled with white bad including coat of approved steel
primer and two coats of approved paint, on overlapping of sheet excluding carriage
all complete.
19.3 Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Rm
Galvanized Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets,
Bitumen washers complete.
19.4 Providing fitting and fixing 16mm thick valley of 90cm overall width in plain G.P Rm
sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia GI limpet and
bitumen washers complete.
19.5 Providing and fixing 15cm wide 45cm overall semicircular G.P sheet (Class I) gutter Rm
with iron brackets 40x3mm size, bolts, nuts, washers etc including making,
connection with rain water pipes.
19.6 Providing, fitting and fixing 23cm deep 24BWG G.P. sheet eaves board including Rm
(50mmx25mm) dressed sal timber beading and M.S. Rod brackets complete.
19.7 Providing fitting and fixing 30cm deep 24BWG GP sheet eaves board including Rm
(50x25mm) dressed sal timber beading and M.S. rod brackets complete.
19.8 Providing, fitting, fixing of 24 BWG Pre-painted HULAS sheet roofing with sqm
lapping of 150mm (two corrugation) with G.I. hooks, bolts and nut 8mm dia with
bitumen, GI limpet washers filled with white bad including carriage all complete
19.9 Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre- Rm
painted HULAS Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets,
Bitumen washers complete.
19.1 Providing fitting and fixing 16mm thick valley of 90cm overall width in plain Pre- Rm
painted HULAS sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia GI
limpet and bitumen washers complete.
19.1 Providing and fixing 15cm wide 45cm overall semicircular Pre-painted HULAS. Rm
sheet (Class I) gutter with iron brackets 40x3mm size, bolts, nuts, washers etc
including making, connection with rain water pipes all complete.
19.1 Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves Rm
board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets
all complete.
19.1 Providing fitting and fixing 30cm deep 24BWG Pre-painted HULAS sheet eaves Rm
board including (50x25mm) dressed sal timber beading and M.S. rod brackets all
complete.
19.1 Providing, fitting, fixing of 24 BWG GCI sheet roofing with G.I. hooks, bolts and sqm
nut 8mm dia with bitumen, GI limpet washers filled with epoxy (8 to 10 gm per
bolt) in each bolts including coat of approved steel primer and two coats of approved
paint, on overlapping of sheet excluding carriage complete.
19.2 Providing, fitting, fixing of 24 BWG GP sheet roofing with G.I. hooks, bolts and sqm
nut 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt)and painted in
lapping with bitumen, GI limpet washers, including coat of approved steel primer
and two coats of approved paint, on overlapping of sheet excluding carriage
complete.
19.2 Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Rm
Galvanized Sheet fixed with G.I, J or L hooks bolts & nuts 8mm dia filled with
epoxy in each bolts (8 to 10 gm per bolt), Limpets, Bitumen washers complete.
19.2 Providing fitting & fixing 16mm thick valley of 90cm overall width in plain G.S. Rm
sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia filed with epoxy in
each bolts (8 to 10 gm per bolt),GI limpet and bitumen washers complete.
19.2 Providing & fixing 15cm wide 45cm overall semicircular G.S. sheet (Class I) gutter Rm
with iron brackets 40x3mm size, bolts filled with epoxy in each bolts (8 to 10 gm
per bolt), nuts, washers etc including making, connection with rain water pipes.
19.2 Providing, fitting, fixing of 24 BWG pre-painted (HULLAS) sheet roofing with G.I. sqm
hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with epoxy in
each bolts (8 to 10 gm per bolt) including coat of approved steel primer and two
coats of approved paint, on overlapping of sheet excluding carriage complete.
19.2 Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG pre- Rm
painted (HULLAS) Sheet fixed with G.I, J or L hooks bolts & nuts 8mm dia filled
with epoxy in each bolts (8 to 10 gm per bolt), Limpets, Bitumen washers etc. all
complete.
19.2 Providing fitting & fixing 16mm thick valley of 90cm overall width in plain pre- Rm
painted (HULLAS) sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia
filled with epoxy in each bolts (8 to 10 gm per bolt), GI limpet and bitumen washers
etc. all complete.
19.2 Providing & fixing 15cm wide 45cm overall semicircular pre-painted (HULLAS) Rm
sheet (Class I) gutter with iron brackets 40x3mm size, bolts filled with epoxy in each
bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain
water pipes.
20 STEEL WORKS
20.1 Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, Kegs
hoisting, fixing in position and applying a priming coat of approved steel primer,
welded and bolted including special shape washer etc as per the standard
specification and design and direction of Engineer - in- Charge all complete.
20.2 Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, Kegs
fixing in position and applying a priming coat of approved steel primer, welded and
bolted including special shape washer etc complete in curve shaped Sikkim- style
roofing as per the standard specification and design and as per the direction of
Engineer - in- Charge all complete.
20.3 Providing, fitting and fixing steel windows and ventilators of standard rolled steel Kegs
section joints mitered and welded with iron lugs embedded in cement concreten1:3:6
including providing fitting and fixing 3 mm thick glass pens with glazing clips and
special metal putty complete with MS grills @ 150mm c/c as per the direction of
Engineer - in- Charge all complete.
20.4 Providing fitting and fixing rolling shutters of approved make , made of required sqm
size MS laths interlocked together through their entire length and joined together at
the end by end lock mounted on specially designed pipe shaft with brackets, side
guides and arrangements for inside and outside locking with push and pull operation
complete including providing and fixing wire springs grade No 2 and MS top cover
of required thickness of rolling shutters as per the direction of Engineer - in- Charge
all complete:
20.5 Providing and fixing M.S round or square bars at required spacing in timber frames Kegs
of windows as per the direction of Engineer - in- Charge all complete.
20.6 Providing and fixing M.S grills in timber frames of windows with M.S flats with Kegs
nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing
8.00Kg/sqm as per the direction of Engineer - in- Charge all complete
20.7 Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Each
Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6
graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the
direction of Engineer - in- Charge all complete:
20.8 Providing, fitting and fixing in position collapsible steel shutter with vertical sqm
channel (20x10x2)mm and braced with flat iron diagonals (20 x 5)mm size with top
and bottom rail of T-iron (40x40x6)mm with 40mm dia steel pulley complete with
bolts, nuts, locking arrangements, stoppers and handles including applying of
priming coat of approved steel primer as per the direction of Engineer - in- Charge
all complete:
20.9 Providing fitting fixing pressed mild steel door frames manufactured from Rm
commercial mild steel sheet of 1.25 mm thick including hinges, jamb, lock jamb,
bread and if required angle threshold of mild steel angle of section(50x25) mm, or
base ties of 1.25mm pressed mild steel welded or rigidly fixed together by
mechanical means, adjustable lugs with split end tail to each jamb including steel
butt hinges, 2.5mm thick with mortar guards, lock, strike plate and a coat of
21 ALUMINUM WORKS
21.1 Providing and fixing anodized aluminum works for doors, windows, ventilators and sqm
partitions with extruded built up standard tubular or other section of approved make
confirming IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips
or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top,
bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth,
rust free, straight, mitered and joined mechanically wherever required i/c cleat angle,
Al snap beading for glazing / paneling CP brass / stainless screws, all complete as
per design and drawings and the direction of the Engineer - in - Charge.
21.2 Providing and fixing pre-laminated sheet three layer medium density (exterior sqm
grade) particle board grade - I type - II confirming IS 12823 bonded with phenol
formaldehyde synthetic resin of approved brand and manufacture in paneling fixed
in Aluminum doors, windows, shutters and partition frames with CP brass / stain
less steel screws etc. complete as per architectural drawings and direction of
Engineer - in- Charge.
21.3 Providing and fixing glazing in Al. doors and windows ventilator shutters and sqm
partitions etc. with PVC / neoprene gasket with CP brass / stain less steel screws etc.
complete as per architectural drawings and direction of Engineer - in- Charge.
ALUMINUM PAINTS
22.5. Providing and painting with Aluminum paint one or more coats on old surface to sqm
1 give an even shade including cleaning and preparing the surface complete. Old
surface
22.5. Providing and painting with Aluminum paint two or more coats on new surface to sqm
2 give an even shade including cleaning and preparing the surface complete. New
surface
22.6 POLISHING
22.6. Varnishing one or more coats with Copal varnish or superior quality spray varnish sqm
1 including preparation of surface with timber putty, sand paper etc on old work
complete. old surface
22.6. Varnishing two or more coats with Copal varnish or superior quality spray varnish sqm
2 including preparation of surface with timber putty, sand paper etc on new work
complete.
22.6. Providing and French spirit polishing one or more coats including cleaning of the sqm
3 surface of dirt and dust papered smooth etc on old surface complete.
22.6. Providing and French spirit polishes two or more coats including cleaning of the sqm
4 surface of dirt and dust papered smooth etc on new surface complete.
22.6. Providing and Floor polishing on masonry / concrete floor with superior quality wax sqm
5 polish complete.
22.7. Removing white/colour wash by steel wire brush, scrapping and sand papers and sqm
3 preparing the surface smooth including repairs to scratches etc complete.
22.8 DISTEMPERING
22.8. Distempering with dry distemper on old work (one or more coats) of required shade sqm
1 to give an even and uniform shade after thorough cleaning of dirt, dust, loose pieces
of scale, grease etc including surface preparation by sand papering etc complete. Old
surface
22.8. Distempering with dry distemper on New surface two or more coats of required sqm
2 shade to give an even and uniform shade including priming coat of whiting to give
an even shade after thorough cleaning of dirt, dust, loose pieces of scabs, grease etc
including surface preparation by sand papering etc complete. New surface
22.8. Providing and distempering with oil bond washable acrylic distemper on old surface sqm
3 of approved brand and manufacture to give an even shade including preparation of
surface etc complete.
22.8. Providing and distempering with oil bound washable acrylic distemper two or more sqm
4 coats of approved brand or manufacture over a coat of cement primer to give an
even shade on new surface including preparation of surface etc complete.
22.8. Removing dry oil bond distemper by scrapping, sand papering and preparing the sqm
5 surface smooth including repairs to scratches- etc complete.
22.8. Providing and washing with three or more coats of snowcem, durocem, cemcoate sqm
6 etc. of approved quality and manufacture on exterior walls to give an even shade
including preparation of surface on New surface complete.
22.8. Providing and washing with two or more coats of snowcem, durocem, cemcoate etc sqm
7 of approved quality and manufacture on exterior walls to give an even shade
including preparation of surface on old surface complete.
22.8. Providing and Providing and painting with plastic Emulsion- paints one or more sqm
8 coats on old surface of required shade to give even shade in- including brushing the
surface clean of all dirt, dust and smoothened by sand paper etc complete.
22.8. Providing and Providing and painting with plastic Emulsion paints two or more sqm
9 coats on New surface of required shade to give an even shade including brushing the
surface clean of all dirt dust and smoothened by sand paper etc complete.
22.8. Providing and Providing and painting with acrylic exterior paints of quality and sqm
10 make equivalent to EXCEL, WEATHER SHIELD to give an even shade including
brushing the surface clean of dirt, dust etc and sand papering and filling the
scratches complete on New surface.
22.8. Providing and Providing and painting with acrylic exterior paints of quality and sqm
11 make equivalent to EXCEL, WEATHER SHIELD to give an even shade including
brushing the surface clean of dirt, dust etc and sand papering and filling the
scratches complete on old surface.
23.3 Providing, Fitting and fixing GI pipe of medium class, (excluding trenching,
refilling, compacting and the cost of fittings) all complete
23.3. 15 mm dia G I pipe Rm
1
23.3. 20mm dia G I pipe Rm
2
23.3. 25mm dia G I pipe Rm
3
23.4 Providing, Fitting and fixing GI pipe of medium class, (excluding trenching,
refilling, compacting and the cost of fittings) all complete
23.4. 32mm dia G I pipe Rm
1
23.4. 40 mm dia G I pipe Rm
2
23.4. 50 mm dia G I pipe Rm
3
23.4. 65 mm dia G I pipe Rm
4
23.5 Providing, Fitting and fixing GI pipe (HEAVY DUTY), (excluding trenching,
refilling, compacting and the cost of fittings) all complete
23.5. 80 mm dia G I pipe Rm
1
23.5. 100 mm dia G I pipe Rm
2
23.5. 150 mm dia G I pipe Rm
3
23.5. 200 mm dia G I pipe Rm
4
23.5. 250mm dia G I pipe Rm
5
23.6 Providing, Fitting and fixing DI pipe, excluding the cost of fittings, trenching,
refilling and compacting all complete:
23.6. 80 mm dia D I pipe Rm
1
23.6. 100 mm dia D I pipe Rm
2
23.6. 150 mm dia D I pipe Rm
3
23.6. 200 mm dia D I pipe Rm
4
23.6. 250mm dia D I pipe Rm
5
23.6. 300 mm dia D I pipe Rm
6
23.6. 350mm dia D I pipe Rm
7
23.7 Providing, Fitting and fixing PVC 32mm dia pipe complete with GI fittings and Rm
clamps including cuttings and making good the walls etc. on wall for wash basin
connector to main line
23.8 Providing, Fitting and fixing Chromium plated fittings of approved quality and size
complete: (ESCO / EQUIVALENT)
23.8. BIB COCK 15 MM DIA Each
1
23.8. STOP COCK 15 MM DIA (CONCEALED WORKS) Each
2
23.8. PILLAR COCK 15 MM DIA Each
3
23.8. ANGULAR STOP COCK 15 MM DIA Each
4
23.8. BIB COCK LONG BODY 15 MM DIA Each
5
23.8. CONNECTING PIPE Each
6
23.8. SHOWER ROSE WITH ARM Each
7
23.8. SHOWER ROSE WITHOUT ARM Each
8
23.8. BASIN MIXTURE Each
9
23.9 Providing, Fitting and fixing brass fittings of approved quality and size complete:
24.2 Providing, fitting and fixing. white vitreous china water closet (W.C) squatting pan Each
(Orissa pan) 580mm size with 100mm SCI (Sand cast iron) P or Strap, 10 ltr low
level flushing cistern with fittings, CI brackets, 32mm flush pipe with fittings and
clamps, 20mm overflow pipe, cutting and making good the wall and floor etc
complete. Long type or Orrisa type pan. Orissa Pan 58x44 White CAT NO 20042
24.3 Providing, fitting and fixing. white vitreous china water closet (W.C) squatting pan Each
(Indian type) 580mm size with 100mm SCI (Sand cast iron) P or Strap, 10 ltr low
level flushing cistern with fittings, CI brackets, 32mm flush pipe with fittings and
clamps, 20mm overflow pipe, cutting and making good the wall and floor etc
complete. Long type or Orrisa type pan. Orissa Pan 58x44 Special CAT NO 20004
24.4 Providing, fitting and fixing. white vitreous china water closet (W.C) squatting pan Each
(Indian type) 580mm size with 100mm SCI (Sand cast iron) P or Strap, 10 ltr low
level flushing cistern with fittings, CI brackets, 32mm flush pipe with fittings and
clamps, 20mm overflow pipe, cutting and making good the wall and floor etc
complete. Long type or Orrisa type pan. Orissa Pan 58x44 (Box rim) Special CAT
NO 20004
24.5 Providing, fitting and fixing white vitreous china pedestal (European type) water Each
closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern
with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials,
including Providing and painting and making good the wall and floors as required all
complete: W.C. pan European Bidets standard CAT NO 30001
24.6 Providing, fitting and fixing white vitreous china pedestal (European type) water Each
closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern
with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials,
including Providing and painting and making good the wall and floors as required all
complete: W.C. pan W.C. pan European Bidets constellation CAT NO 30006
24.7 Providing, fitting and fixing white vitreous china pedestal (European type) water Each
closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern
with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials,
including Providing and painting and making good the wall and floors as required all
complete: W.C. pan European One pice (Star white) CAT NO 92008
24.8 Providing, fitting and fixing white vitreous china pedestal (European type) water Each
closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern
with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials,
including Providing and painting and making good the wall and floors as required all
complete: W.C. pan European One pice (Ivory) CAT NO 92008
24.9 Providing, fitting and fixing white vitreous china flat back or wall corner type lipped
front urinal basin of size 440x315x325 mm with 5 ltr automatic flushing cistern
with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps
including cutting and making good the walls and floors as required all complete:
24.13 49 cm x 36 cm Each
.1
24.13 51 cm x 45 cm Each
.2
24.13 63 cm x 50 cm Each
.3
24.1 P/F stain less steel kitchen sink with CI brackets, CP brass chain with rubber plug
40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and
making good the wall wherever required.
24.14 610 x 450 x 200 mm. Each
.1
24.2 Providing, fitting and fixing laboratory sink with CI brackets, CP brass chain with
rubber plug, 40mm CP brass waste, CP brass tap, stop cock etc all complete
including the fittings, cutting and making good the wall wherever required.
HINDWARE
24.15 63 cm x 50 cm Each
.1
24.2 Providing and Fitting Pedestal white colour for of Hind Vitreous wash basin Each
complete.
BATH ROOM FITTINGS
24.2 Providing and fitting chromium plated toilet paper holder including the making Each
holes and fixed to timber cleats with CP screws washer etc. all complete:.
24.2 Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. Each
sheets ground and fixed to timber cleats with CP screws, washer etc complete.
24.2 Providing and fitting of slandered size mirror of quality equivalent to Admiral and Each
size 20"x16" complete
24.2 Providing and fitting Porcelain soap tray all complete. Each
24.2 Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc Each
all complete.
24.2 Providing, fitting and fixing towel rail of chromium plated brass complete with
brackets fixed to the timber cleats, CP brass screws complete.
24.22 740 x 20 mm Each
.1
24.22 600 x 20 mm Each
.2
24.2 Providing, fitting and fixing towel ring of chromium plated brass complete with CP Each
brass screw and timber cleats.
SOIL WASTE / VENT PIPE FITTINGS (ISI)
24.2 Providing, fitting and fixing soil waste and vent pipes including testing etc complete.
25.2 Head load of non-stock materials for a distance beyond 30 m and within 100 m cum
distance
25.3 Head load of stock materials for a distance beyond 100 m for every additional qtls
1000m
25.4 Head load of non-stock materials for a distance beyond 100 m for every additional cum
1000m
25.5 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. cum
300.000
1100.000
900.000
750.000
700.000
650.000
350.000
50.000
13044.280
3.900
1.970
100.180
54.670
152.310
102.200
152.960
93.250
268.980
218.870
238.790
243.340
207.250
164.740
257.170
496.980
515.330
29.000
52.200
126.440
68.440
464.750
359.600
560.280
464.560
9218.780
6095.980
5012.850
3903.760
3306.550
2794.660
7030.060
5427.240
4608.120
4420.200
3821.970
3563.290
3136.710
2795.450
7666.910
5844.840
4942.200
4754.280
4051.650
3792.970
3225.450
2863.310
224.370
232.390
7271.050
5495.670
4849.110
7907.900
5913.270
5183.190
132.300
116.330
107.730
100.360
155.130
136.050
125.780
116.970
191.460
166.610
153.240
141.770
139.120
121.410
111.910
103.700
163.270
142.110
130.730
120.960
202.060
174.510
159.680
146.970
15.660
1214.860
1209.830
90.080
639.140
5399.930
5327.850
503.400
583.370
945.720
649.010
5471.850
5770.400
527.820
604.660
955.600
215.990
249.800
295.730
313.480
305.590
274.140
24.360
380.340
407.780
511.720
751.770
878.810
983.630
31.260
36.540
1721.620
2258.120
2693.120
197.200
136.300
1924.440
2460.930
2895.930
1144.410
1337.930
1517.700
1571.530
2077.970
970.580
855.590
1017.000
1150.990
835.620
993.950
993.950
524.270
3441.420
2705.710
488.650
884.890
1786.110
4.84xqty of wall
2722.260
2467.240
2971.660
2766.090
10861.190
834.620
1474.940
185.770
1259.900
1867.950
694.290
#REF!
752.490
415.460
429.400
441.060
630.750
719.980
568.000
371.490
363.770
380.250
473.890
608.860
511.890
26377.030
21709.010
33169.820
28501.800
54918.470
44749.100
61711.260
51541.890
2965.090
1889.830
3777.010
3167.920
1523.110
903.160
2380.860
1989.740
2088.130
886.270
1886.060
1262.790
86.550
64.820
331.430
274.610
1641.130
1323.560
2609.420
2783.390
3044.330
3479.230
3914.140
4349.040
2073.780
2204.680
2411.370
2755.850
3100.330
3444.810
2042.400
2178.560
2382.800
2723.200
3063.600
3404.000
2373.500
2531.730
2769.080
3006.430
3164.660
2076.400
2214.820
2422.460
2630.100
2768.530
1788.560
245.400
527.280
3808.590
614.570
2996.290
3246.030
2770.010
3183.600
4791.400
438.480
515.040
591.600
576.290
763.860
955.260
82.360
73.080
63.800
193.720
184.440
171.680
168.210
371.200
268.540
123.540
145.580
957.000
1003.400
351.480
210.540
263.900
94.540
94.540
887.400
933.800
305.080
77.720
429.200
440.800
429.200
135.140
75.400
411.800
423.400
411.800
107.300
63.800
382.800
382.800
386.280
99.180
63.800
324.800
348.000
336.400
81.780
59.160
121.800
127.600
131.080
63.220
77.140
44.080
128.760
128.760
48.140
46.400
107.300
107.300
47.850
46.400
92.800
92.800
20.300
1406.510
1406.510
1551.500
609.010
1406.510
1406.510
1551.500
461.390
1171.600
203.230
6819.650
6728.300
853.440
997.050
495.160
521.860
403.660
412.890
667.730
942.520
535.100
588.020
423.720
470.830
540.760
890.670
1052.120
505.060
526.420
420.980
958.920
523.680
586.470
441.040
65.580
72.640
83.430
2113.360
64.160
73.130
23.190
2184.620
452.200
1799.880
809.240
754.830
61.780
32.710
28.280
62.120
44.110
34.740
50.170
6.620
9.560
12.500
18.470
10.910
15.740
20.580
30.410
6.450
9.310
12.180
17.990
11.410
16.460
21.520
31.800
34.220
55.340
80.040
135.650
127.380
321.150
64.500
10.940
19.110
4.790
28.770
59.690
29.030
53.470
6.610
65.890
32.370
45.470
60.460
61.920
39.530
208.410
379.430
151.210
191.950
287.350
353.180
406.140
568.370
730.140
1091.500
1571.470
2376.880
4988.550
5302.800
1754.740
1786.880
2609.030
3469.690
4598.900
5809.570
7516.560
465.520
597.410
1020.800
609.010
1125.200
806.210
185.600
968.610
783.010
1682.000
481.410
469.810
516.210
701.810
1038.210
1455.810
4350.000
8700.000
17400.000
345.680
3321.660
3437.660
4834.300
5843.500
7317.280
7630.480
14819.010
16901.200
4359.280
6011.120
7836.960
10556.000
4957.840
8802.080
10839.040
13924.640
3811.760
2830.400
2628.560
4426.560
3489.280
3287.440
3476.530
3234.080
3314.130
5515.810
6641.010
4906.800
1061.410
458.210
888.800
431.520
545.200
353.810
936.130
878.130
570.720
276.680
161.610
194.880
140.370
476.480
259.550
309.730
559.120
794.610
5.410
127.970
73.740
1301.320
87.000
109.780
153.580
5.570
6.960
8.720
(A) Usage Rates of Plant and Machinery
Output of 2011
Sl. No. Description of Machine Activity Output Unit
Machine Rate
capacity in
P&M-001 Air Compressor General Purpose 170/250 hour 350.00
cfm
Batching and Mixing
P&M-002 Plant (a) 30 cum Concrete Mixing cum/hour 20 hour 2235.00
capacity
Batching and Mixing
P&M-003 Plant (b) 15 - 20 cum Concrete Mixing cum/hour 13 hour 1860.00
capacity
Bitumen Pressure Applying bitumen
P&M-004 sqm/hour 1750 hour 1250.00
Distributor tack coat
capacity in
P&M-005 Bitumen Boiler oil fired Bitumen Spraying 1500 hour 230.00
litre
Concrete Paver Finisher Paving of concrete
P&M-006 cum / hour 20 hour 3000.00
with 40 HP Motor surface
Concrete Pump of 45 & Pumping of
P&M-007 cum / hour 33 / 22 hour 215.00
30 cum capacity concrete
For Pouring capacity in
P&M-008 Concrete Bucket 1 hour 13.00
concrete cum
Concrete Mixer (a)
P&M-009 Concrete Mixing cum/hour 2.5 hour 120.00
0.4/0.28cum
P&M-010 Concrete Mixer (b) 1 cum Concrete Mixing cum/hour 7.5 hour 150.00
P&M-011 Crane (a) 80 tonnes Lifting Purpose hour 1800.00
P&M-012 Cranes b) 35 tonnes Lifting Purpose hour 1500.00
P&M-013 Cranes c) 3 tonnes Lifting Purpose hour 800.00
Spreading/Cutting/
P&M-014 Dozer D - 80 - A 12 cum/hour 300/ 150/250 hour 3800.00
Clearing
Spreading/Cutting/
P&M-015 Dozer D - 50 - A 15 cum/hour 200/ 120/150 hour 2300.00
Clearing
Emulsion Pressure Applying emulsion
P&M-016 sqm/hour 1750 hour 935.00
Distributor tack coat
Front End loader 1 cum Soil loading /
P&M-017 cum/hour 60 /25 hour 800.00
bucket capacity Aggregate loading
Generation of
P&M-018 Generator (a) 125 KVA KVA 100 hour 690.00
electric Energy
Generation of
P&M-019 Generator( b) 63 KVA KVA 50 hour 430.00
electric Energy
P&M-020 GSB Plant 50 cum Producing GSB cum/hour 40 hour 1040.00
Hotmix Plant - 120 TPH DBM/BM/SDC/
P&M-021 cum/hour 40 hour 27300.00
capacity Premix
Hotmix Plant - 100 TPH DBM/BM/SDC/
P&M-022 cum/hour 30 hour 20200.00
capacity Premix
Hotmix Plant - 60 to 90 DBM/BM/SDC/
P&M-023 cum/hour 25 hour 16100.00
TPH capacity Premix
Hotmix Plant - 40 to 60 DBM/BM/SDC/
P&M-024 cum/hour 17 hour 12900.00
TPH capacity Premix
P&M-025 Hydraulic Chip Spreader Surface Dressing sqm/hour 1500 hour 2640.00
Soil Ordinary/ Soil
Hydraulic Excavator of 1
P&M-026 Marshy/ Soil cum/hour 60 /60 /60 hour 1100.00
cum bucket
Unsuitable
Integrated Stone Crusher
P&M-027 Crushing of Spalls TPH 100 hour 8675.00
100THP
Integrated Stone Crusher
P&M-028 Crushing of Spalls TPH 200 hour 18250.00
200THP
Output of 2011
Sl. No. Description of Machine Activity Output Unit
Machine Rate
P&M-029 Kerb Casting Machine Kerb Making Rm/hour 80 hour 310.00
Mastic Wearing capacity in
P&M-030 Mastic Cooker 1 hour 95.00
coat tonne
Mechanical Broom
P&M-031 Surface Cleaning sqm/hour 1250 hour 365.00
Hydraulic
Clearing
Motor Grader 3.35 m
P&M-032 /Spreading cum/hour 200/200/50/50 hour 2500.00
blade
/GSB /WBM
Mobile slurry seal Mixing and laying
P&M-033 sqm/hour 2700 hour 1730.00
equipment slurry seal
Paver Finisher
Paving of DBM/
P&M-034 Hydrostatic with sensor cum/hour 40 hour 2900.00
BM/SDC/ Premix
control 100 TPH
Paver Finisher
Paving of WMM
P&M-035 cum/hour 40/30 hour 1200.00
Mechanical 100 TPH /Paving of DLC
0.75 m dia to 1.2 m
Piling Rig with Bantonite
P&M-036 dia Boring Rm/hour 2 to 3 hour 5470.00
Pump
attachment
Rolling of Asphalt
P&M-037 Pneumatic Road Roller cum/hour 25 hour 1245.00
Surface
Pneumatic Sinking
P&M-038 Pneumatic Sinking Plant cum/hour 1.5 to 2.00 hour 4175.00
of wells
P&M-039 Pot Hole Repair Machine Repair of potholes cum/hour 4 hour 910.00
Prestressing Jack with Stressing of steel
P&M-040 hour 110.00
Pump & access wires/stands
P&M-041 Ripper Scarifying cum/hour 60 hour 28.00
P&M-042 Rotavator Scarifying cum/hour 25 hour 18.00
P&M-043 Road marking machine Road marking Sqm/hour 100 hour 170.00
Smooth Wheeled Roller Soil Compaction
P&M-044 cum/hour 70/25 hour 480.00
8 tonne /BM Compaction
Rolling of Asphalt
P&M-045 Tandem Road Roller cum/hour 30 hour 1145.00
Surface
Transportation of
Capacity in
P&M-046 Tipper - 5 cum soil, GSB, WMM, 5.5 km 330.00
cum
Hotmix etc.
Transportation of
Capacity in
P&M-047 Tipper - 5 cum soil, GSB, WMM, 5.5 tonne. 4.87
cum
Hotmix etc. km
Transportation of
Capacity in
P&M-048 Tipper - 5 cum soil, GSB, WMM, 5.5 hour 450.00
cum
Hotmix etc.
Transportation of
P&M-049 Transit Mixer 4.0/4.5 cum Concrete Mix to cum/hour 4.5 hour 770.00
site
Transportation of
P&M-050 Transit Mixer 4/4.5 cum Concrete Mix to cum/hour 4.5 tonne. 770.00
site km
Transportation of
P&M-051 Transit Mixer 3.0 cum Concrete Mix to cum/hour 3 hour 710.00
site
Transportation of
P&M-052 Transit Mixer 3.0 cum Concrete Mix to cum/hour 3 tonne. 30.00
site km
capacity in
P&M-053 Tractor Pulling 50 hour 355.00
HP
Rate of Tractor +
P&M-054 Tractor with Rotavator hour 370.00
Rotavator
Rate of Tractor +
P&M-055 Tractor with Ripper hour 380.00
Ripper
Truck 5.5 cum per 10
P&M-056 Material Transport capacity/cum 4.5 km 330.00
tonnes
Truck 5.5 cum per 10
P&M-057 Material Transport capacity/cum 4.5 hour 450.00
tonnes
2011
Sl. No. Description of Machine Unit
Rate
P&M-063 Air compressor with pneumatic chisel attachment for cutting hard clay. hour 525.00
Batch type cold mixing plant 100-120 TPH capacity producing an average
P&M-064 hour 8040.00
output of 75 tonne/hour
P&M-065 Belt conveyor system hour 1750.00
P&M-066 Boat to carry at least 20 persons hour 210.00
P&M-067 Cement concrete batch mix plant @ 175 cum per hour (effective output) hour 4350.00
P&M-068 Cement concrete batch mix plant @ 75 cum per hour hour 8040.00
P&M-069 Cold milling machine @ 20 cum per hour hour 1520.00
P&M-070 Crane 5 tonne capacity hour 850.00
P&M-071 Crane 10 tonne capacity hour 900.00
P&M-072 Crane 15 tonne capacity hour 1000.00
P&M-073 Crane 20 tonne capacity hour 1200.00
P&M-074 Crane 40 T capacity hour 1500.00
P&M-075 Crane with grab 0.75 cum capacity hour 1600.00
P&M-076 Compressor with guniting equipment along with accessories hour 530.00
Drum mix plant for cold mixes of appropriate capacity but not less than 75
P&M-077 hour 9200.00
tonnes/hour.
P&M-078 Epoxy Injection gun hour 250.00
P&M-079 Generator 33 KVA hour 400.00
P&M-080 Generator 100 KVA hour 700.00
P&M-081 Generator 250 KVA hour 1200.00
Induction, de-induction and erection of plant and equipment including all
P&M-082 hour 0.00
components and accessories for pneumatic method of well sinking.
P&M-083 Joint Cutting Machine with 2-3 blades (for rigid pavement) hour 130.00
P&M-084 Jack for Lifting 40 tonne lifting capacity. day 400.00
P&M-085 Piling rig Including double acting pile driving hammer (Hydraulic rig) hrs 3800.00
P&M-086 Plate compactor hour 180.00
P&M-087 Snow blower equipment 140 HP @ 600 cum per hour hour 880.00
P&M-088 Texturing machine (for rigid pavement) hour 670.00
P&M-089 Truck Trailor 30 tonne capacity hour 1110.00
P&M-090 Truck Trailor 30 tonne capacity t.km 4.20
P&M-091 Tunnel Boring machine hour 2040.00
P&M-092 Vibrating Pile driving hammer complete with power unit and accessories. hour 710.00
P&M-093 Wet Mix Plant 100 TPH hour 1400.00
P&M-094 Wet Mix Plant 75 TPH hour 1310.00
(B) Labour
2011
Sl. No. Description of Labour Unit
Rate
L-01 Blacksmith (IInd class) day 275
L-02 Blacksmith (Ist class)/ Welder/ Plumber/ Electrician day 300
L-03 Blaster (Stone cutter) day 300
L-04 Carpenter I Class day 300
L-05 Chiseller (Head Mazdoor) day 300
L-06 Driller (Jumper) day 275
L-07 Diver day 275
L-08 Fitter (II class) day 275
L-09 Mali day 200
L-10 Mason (IInd class) day 275
L-11 Mason (Ist class) day 300
L-12 Mate / Supervisor day 300
L-13 Mazdoor day 200
L-14 Mazdoor/Dresser (Semi Skilled) day 275
L-15 Mazdoor/Dresser/Sinker (Skilled-II) day 250
L-16 Medical Officer day 500
L-17 Operator (grouting) day 300
L-18 Painter (II class) day 275
L-19 Para medical personnel day 275
(C) Materials
2011
Sl. No. Description Unit
Rate
M-001 Stone Boulder of size 150 mm and below at Crusher Plant cum 300.00
M-002 Supply of quarried stone 150 - 200 mm size for Hand Broken at site cum 300.00
M-003 Boulder with minimum size of 300 mm for Pitching at Site cum 300.00
M-004 Coarse sand at Mixing Plant cum 400.00
M-005 Coarse sand at Site cum 400.00
M-006 Fine sand at Site cum 400.00
M-007 Moorum at Site cum 210.00
M-008 Gravel/Quarry spall at Site Cum 300.00
M-009 Granular Material or hard moorum for GSB works at Site Cum 450.00
M-010 Granular Material or hard moorum for GSB works at Mixing Plant Cum 550.00
Fly ash conforming to IS: 3812 (Part II & I) at HMP Plant/Batching
M-011 Cum -
Plant/Crushing Plant
M-012 Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) Cum 400.00
Rate at
Sl. No Description Usage Unit
Plant
Sub-base
M-013 Close graded Granular sub-base Material 53 mm to 9.5 mm Cum 640.00
course
Close graded Granular sub-base Material 37.5 mm to 9.5 Sub-Base
M-014 Cum 690.00
mm course
Close graded Granular sub-base Material 26.5 mm to 9.5 Sub-Base
M-015 Cum 720.00
mm course
Close graded Granular sub-base Material 9.5 mm to 4.75 Sub-Base
M-016 Cum 880.00
mm course
Close graded Granular sub-base Material 9.5 mm to 2.36 Sub-Base
M-017 Cum 930.00
mm course
Close graded Granular sub-base Material 4.75mm to 2.36 Sub-Base
M-018 Cum 880.00
mm course
Close graded Granular sub-base Material 4.75mm to 75 Sub-Base
M-019 Cum 760.00
micron mm course
Sub-Base
M-020 Close graded Granular sub-base Material 2.36 mm Cum 690.00
course
Stone crusher dust finer than 3mm with not more than 10% Wearing
M-021 Cum 560.00
passing 0.075 sieve. course
Overheads for Road Works 7.5 % and Water charge and sundries 1% 8.5%
Contractors profit for Road Works 7.50%
Overheads for Bridge Works 20%
Overheads for Bridge Works (Rehabilitation) 30 %
Contractors profit for Bridge Works 7.50%