Professional Documents
Culture Documents
Specifications
Discontinued
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Range of product Harmony XAL
Complementary
Assembly style For customer assembly
Connections - terminals Screw clamp terminals, 1 x 0.5...1 x 2.5 mm² without cable end
Screw clamp terminals, 1 x 0.5...2 x 1.5 mm²
[Ui] rated insulation voltage 500 V (pollution degree 3) conforming to IEC 60947-1
600 V conforming to UL 508
600 V conforming to CSA C22.2 No 14
Electrical durability 1000000 cycles, DC-13 at 120 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to IEC
60947-5-1 appendix C
1000000 cycles, DC-13 at 24 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to IEC
60947-5-1 appendix C
1000000 cycles, DC-13 at 48 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to IEC
60947-5-1 appendix C
Environment
Protective treatment TH
TC
20/06/2023 1
Ambient air temperature for -40…70 °C
storage
Offer Sustainability
Sustainable offer status Green Premium product
WEEE The product must be disposed on European Union markets following specific waste collection and
never end up in rubbish bins
Contractual warranty
Warranty 18 months
Recommended replacement(s)
XENL1111 is replaced by the following product range:
Single contact block, Harmony XALD, XALK, silver alloy, rear mounting, screw clamp
1x terminal, 1NO
ZENL1111
2
20/06/2023