Professional Documents
Culture Documents
Ionicity anionic
Water x g/kg
Sera® Sperse C-SN 5 g/kg
Sera® Foam M-DMO 3-10 g/kg
Urea 50 - 250 g/kg
Sera® Con M-LU 50 g/kg
Sodium bicarbonate 40-45 g/kg
Soda Ash 0 - 2 g/kg
Sera® Print M-BTR 30 - 35 g/kg
Total 1000 g/kg
- add sequestering agent Sera® Sperse C-SN & defoamer into water
- under stirring add urea and mild oxidising agent Sera® Con M-LU
- add Soda Ash & Sodium bicarbonate and homogenize the mixture
- add Sera® Print M-STR by constant stirring for desired viscosity
Water x g/kg
Sera® Sperse C-SN 5 g/kg
Sodium Alginate 30 - 120 g/kg
Total 1000 g/kg
Hard water may influence the soft handle, the additional use of Sera
Sperse C-SN as a complexing agent and addition of Natural Thickener
like Sodium Alginate is recommended, for extreme cases, to improve the
wash ability and electrolyte stability.
DyStar India Private Limited This information and our technical advice - whether verbal, in writing
Plot No. 3002 / G.I.D.C. Ankleshwar, or by way of trials - are given in good faith but without warranty, and
this also applies where proprietary rights of third parties are involved.
Bharuch, Gujarat, India 393002
Our advice does not release you from the obligation to check its va-
Telephone +91 022 6141 90 65 lidity and to test our products as to their suitability for the intended
India.Auxiliaries@DyStar.com processes and uses. The application, use and processing of our
www.DyStar.com products and the products manufactured by you on the basis of our
technical advice are beyond our control and, therefore, entirely your
own responsibility. Our products are sold in accordance with our
General Conditions of Sale and Delivery.