Professional Documents
Culture Documents
MACH 1 DTS (Ver.2)
MACH 1 DTS (Ver.2)
Course Outcomes:
At the end of the course, students should be able to:
CO1. Demonstrate the safe and appropriate use of hand and power tools and measuring instruments in accordance with accepted practice.
CO2. Demonstrate the safe and appropriate use of specialized tools and measuring instruments being used for the maintenance and repair of shipboard
machinery and equipment in accordance with accepted practice
Prepared by: Reviewed and Validated by: Approved by: Date of Effectivity
____________________ _______________________ _____________________ _______________
Designation Designation Designation
Page 1 of 8
REVISION DETAILS
REV.NO. DATE
FROM TO
Page 2 of 8
Equipment, Materials, Indicative
Learning Outcome Assessment Topic Teaching-Learning Activities (TLA)
References Hours
Competence/s:
Appropriate use of hand tools, machine tools, and measuring instruments for fabrication and repair on board
KUP/s:
KUP5: Safety measures to be taken to ensure safe working environment and for using hand tools, machine tools and measuring instruments
KUP6: Use of hand tools, machine tools and measuring instruments
LO 1.1: Formative Assessment 1.1: Introduction to the TA 1.1: (List/Code the (No. of hours
Explain the safety (Describe the assessment to be used to Course and (Describe the activity of the faculty/ instructor) equipment, materials, by Topic or
requirements in measure the Learning Outcome; Orientation references to be used by Sub Topic)
the use of the ff: identify the code and title of the Safety Precaution the faculty)
A. General assessment tool) LA 1.1:
Prior to Working
Workshop (Describe the activities of the students) (List/Code the
Safety Signs and
Safety and Posters equipment, materials,
Housekeeping references to be used by
Importance of
B. Hot, Cold, and the students)
Operation Manual
Aloft Work Safety/ Toolbox
Permits Meeting
C. Hand Tools WorkPermits
D. Power Tools
Firefighting and
E. Measuring
Safety Equipment
Instruments
Elementary First
Aid
Personal
Protective
Equipment
Good
Housekeeping
Risk Management
and Assessment
Page 3 of 8
LO 1.2: Formative Assessment 1.2: Topics: TA 1.2:
Explain the proper Safety Precaution
and safe use of During Work LA 1.2
different hand Safety Use of
tools in Tools
accordance with Various Hand
the code of safe Tools
working practices Hygiene and
First Aid
Safety
Awareness
Emergency
Situations
Electrical Safety
LO 1.3: (LAB)
Demonstrate the Safety Precaution
safe practices to During Work
be observed Safety Use of
during work while Tools
using different Various Hand
hand tools in Tools
accordance with Hygiene and
the Code of Safe First Aid
Working Practices Safety
Awareness
Emergency
Situations
Electrical Safety
Page 4 of 8
accordance with Use of Tools
the code of safe Scales, Dials,
working practices and Gauges
Reading
Rules and Steel
Tapes
L-Square
Dividers
Level Bar
Depth Gauge
Feeler Gauge
Screw Pitch
Gauge
Vernier caliper
Micrometer
Caliper
Surface gauge
Ruler
LO1.5: (LAB) Measuring Instruments
Demonstrate the Selection of
use of measuring Appropriate
instruments in the Tools
fabrication of a Safety in the
workpiece Use of Tools
following specific Scales, Dials,
standards and Gauges
indicated in the Reading
marking sheet Rules and Steel
Tapes
L-Square
Dividers
Level Bar
Depth Gauge
Feeler Gauge
Screw Pitch
Page 5 of 8
Gauge
Vernier caliper
Micrometer
Caliper
Surface gauge
Ruler
LO1.6: Explain Portable Power Tools
the proper and Safety in the
safe use of Use of Portable
different power Power Tools
hand tools in Pneumatic,
accordance with Hydraulic, and
the code of safe Electrical Power
working practices Tool
Portable Power
Drills
Portable Electric
Saw
Portable Electric
Grinder
LO1.7: Portable Power Tools
Demonstrate Safety in the
correct use of Use of Portable
common portable Power Tools
power hand tools Pneumatic,
to fabricate and Hydraulic, and
repair specific Electrical Power
workpiece. Tool
Portable Power
Drills
Portable Electric
Saw
Portable Electric
Grinder
Page 6 of 8
Competence/s:
Maintenance and repair of shipboard machinery and equipment
KUP/s:
KUP4: The use of appropriate specialized tools and measuring instruments
Page 7 of 8
Purifier
Air Compressor
Air Condition
Compressor
List of Equipment (includes tools, devices, simulator, and the like that are being used in the laboratory exercises/drills and performance assessment)
List of Materials (includes the learning materials used in the course delivery such as Activity Sheet, handout, slide presentations, video, video clip, film clip, photos, diagrams and the like
that are used in the course delivery)
Page 8 of 8