Professional Documents
Culture Documents
General Status O, A, S Metrics O, A, S Partitions (Cleaning or Storage) A, S Drives (DLM) A, S System (Cont.) A, S
General Status Metrics Shared Library Services Drives System Setup—Other Settings
Partition Selection Metric New Drive Traces 6 Library Name
– Drives Status > Drives screen – Power Consumption Summary Drive Performance Web Server Port
– Media Status > Inventory screen – Drive Write Performance Edit Drive Firmware Update Refresh Rate
Robotics Status – Drive Read Performance Delete Drive n Auto Logout Timeout
– Run All Motion Basic Tests – Storage Density Global Spare – Add 1
Online Access to Spectra Logic
– Robot Utilization by Hour Target – Global Spare Usage – Remove 1
Drive Performance Monitoring
Power Status Name and Media Type – Replace 1
– Clean Power Consumption Monitoring
Fans Status Media Lifecycle C/S: Name
TAPs – Detail Enable Automatic Power-Up
Management O, A, S C/S: Media Type
Power Usage S: Advanced – DLM Report After Power Failure
Density Media Lifecycle Management – Emulation – Test Enable SSL
Report – Reset Enable SNMP Agent
S: Robotic Control Path
Inventory O, A, S Partition – SNMP Settings
Report S: Spare Drives (Global Spares) Controllers A, S Enable Soft Power
Inventory Chambers and Drives
– Media Health Syslog Server IP Address
Partition C/S: Storage Chambers Controllers
– Remaining Capacity BlueScale Vision IP Address
Source (for media move) Add 1
– Load Count S: EE Chambers
Destination (for media move) Remove 1 Network Settings
– Write Errors S: Drives
Move Queue (defined moves) Replace 1 Mail Users
– Cleans Remaining S: Cleaning Partition
View Source Slot Failover Auto Configuration Save
– Born on Date S: MLM Media Verification
Find by Barcode – Exported Media Routine Maintenance
PreScan System
Start Moves (defined moves) – Last Write Time
A, S Date and Time
– Enable PreScan
Advanced – Last Read Time System Setup—Option Enablement
PostScan
– Upload Moves Save Report 2 Media Lifecycle
– FullScan Hardware ID
– Download Inventory Barcode Filter 5 Management
– QuickScan Key A, S
Import/Export 1 O, A, S
– QuickScan using Global – Save Media Lifecycle Management
5
Spare Currently Installed Keys Settings
Import/Export TeraPack Cases – Scan After Time (Days) Enable MLM
Storage Partition – Scan After Write Go to Configuration (Cont.)
Storage Pool Enable Alerts for Non-MLM
– Scan After Read
– Import Media
S: Encryption Enable Alerts for Load Count
– Export/Exchange (Encryption user logged in)
Entry/Exit Pool Discrepancies
– BlueScale
– Import – Spectra TKLM 3, 6 Minimum Cleaning Passes
– Export/Exchange (Full Chambers) Before Warning
– Export/Exchange (Pop. Chambers) S: Fibre Channel Loop IDs (Drives)
Maximum Tape Loads Before
Recycle Encrypted Media S: Partition Users Warning
Cleaning Partition S: Robotic Path Visibility Enable Media Auto Discovery
– Import
S: Exporting F-QIP Configuration (RIM) Minimum Idle Minutes Before
– Export/Exchange
Address Auto Discovery
– Export/Exchange Expired
3 Fibre Mode Convert to Broadcast Hours
Rotation Manager
Advanced C/S: Save Library Configuration Override Broadcast Bit Rate
– Advanced Import/Export C/S: Save Partition PostScan Blackout Periods
This map is current for the BlueScale12.6.44 release. The BlueScale user interface changes as features are added or modified. Check
support.spectralogic.com/documentation/user-guides/, or the Spectra T950 Library Release Notes and Documentation Updates on the
Technical Support Portal to see if you have the latest version of this document.
© 2009–2015 Spectra Logic Corporation. BlueScale, CC, Spectra, SpectraGuard, Spectra Logic, TeraPack, and TranScale are registered trademarks of Spectra Logic Corporation. ArchiveGrade,
BlackPearl, IntraCloud, nTier Verde, and Verde are trademarks of Spectra Logic Corporation. All rights reserved worldwide. All other trademarks and registered trademarks are the property of
their respective owners.
LIBRARY USER OVERVIEW
The library’s BlueScale interface offers three types of user groups. The following table describes the types of
privileges each user group has when operating the library.
User Type a, b Responsibilities (See designation indicators in the map on page 1) Default User Name
Superuser Controls all aspects of library use, configuration, and security. su
Administrator Performs all operations except creating or editing library users and accessing administrator
encryption settings.
Operator Performs daily operations (move, import, and export media). operator
a. By default, passwords are not required.
b. If encryption is enabled, there is an additional, separate encryption password for accessing the encryption features.
ADDITIONAL INFORMATION
Use the links in the following table to locate additional useful information.