Professional Documents
Culture Documents
How To Initialize The CODE 39 - Without Checking - Sample Barcode For BS-400
How To Initialize The CODE 39 - Without Checking - Sample Barcode For BS-400
OTY-12001(2.0)
How to initialize the CODE 39 (without checking) sample barcode for BS-400
I. If the CODE 39 sample barcode has fixed digits, you could do as follow:
1. Barcode initialization
Run the Debug software, and choose “Bar code”“Sample Bar code”, and then click the “initialize”, as the
picture below:
Fig3. Preset the Symbology and the length in the Operation Software.
II. If the CODE 39 sample barcodes have different digits, you could do as follow:
1. Set the Format and Symbology of the barcode in the Operation Software.
No.: Version:1.0
Bio-chemistry Global Technical Support Dept.
OTY-12001(2.0)
4. Save the instruction.
Fig7. The CODE 39 sample Barcode with 5 digits (without checking) is scanned
Fig8. The CODE 39 sample Barcode with 7 digits (without checking) is scanned too
NOTE:
1) The letters in the instruction“<K470,1,0,0,0,0,0,1>” and “<Z>” are capital letters, not lowercase letters;
2) After setting according to above, only CODE 39 sample barcode could be scanned for this BS-400. If you
want to scan the other kind of barcode, you could execute the initialization again as the Fig.1.above, because
these two statuses could not coexist.
No.: Version:1.0