The client wants to build parallel chord trusses without plating at the apex connection. The trusses will be made of 3" or 2" HAT profile steel between 18-16 gauge. They want confirmation that stamping this type of truss formation is acceptable for future projects, as their software analysis shows it can withstand snow loads up to 120psf and winds over 130mph. Additional feedback is requested on the strength and behavior of the notched bottom chord under these specified loads at the apex connection.
The client wants to build parallel chord trusses without plating at the apex connection. The trusses will be made of 3" or 2" HAT profile steel between 18-16 gauge. They want confirmation that stamping this type of truss formation is acceptable for future projects, as their software analysis shows it can withstand snow loads up to 120psf and winds over 130mph. Additional feedback is requested on the strength and behavior of the notched bottom chord under these specified loads at the apex connection.
The client wants to build parallel chord trusses without plating at the apex connection. The trusses will be made of 3" or 2" HAT profile steel between 18-16 gauge. They want confirmation that stamping this type of truss formation is acceptable for future projects, as their software analysis shows it can withstand snow loads up to 120psf and winds over 130mph. Additional feedback is requested on the strength and behavior of the notched bottom chord under these specified loads at the apex connection.