Professional Documents
Culture Documents
F-15 Park Jet Plans (Parts Templates 175 Tiled)
F-15 Park Jet Plans (Parts Templates 175 Tiled)
Copyright © 2004
All parts made f
BlueCore foam un
by Steve Shumate
04 All Rights Reserved
e from 6 mm Depron or
unless otherwise specified
Bevel this area
Exhaus
sides (
mirror
haust nozzle
es (make 2
rror image)
Inboard inlet sides
(make 2)
Cut hole for access
to radio compartment
Forward i
(mak
ard inlet tops
make 2)
Aft engine fairings
(make 2 and sand to a rounded shape)
These are OPTIONAL and for
aesthetics only--not recommended if yo
model comes out tail heavy
Mounting hol
(cut to fit select
(cut to fit select
Motor mount
(make 2 and
laminate together)
(make 1)
Wing strakes/inlet top
Stabilators
(make 2)
top
Wing
(make 1)
Inlet diverter/spacer
(make 2 from 3 mm
Depron or 1/8" balsa)
Aft Fuselage Top
(make 1)
Cut notch to fit
motor used
pe)
your
Scale in inche
0 2
(13 if BlueCore) and Bulkhead F-2
laminate together) (make 1)
4 6
rill
Bulkhead F-3
Bulkhead F-4
(make 1)
(make 1)
Dashed green lines
to attach balsa tr
Aft Fuselage Sides with Vertical Tails
(make 2)
4
i an g le
l sa tr
8" b a
3/
F-2
wd fuselage F-1
m to fit)
Nosecone
(make 11 with 6 mm Depron
(13 if BlueCore) and Bulkhead F-2
Fwd Fuselage Sid
F-3
te where
stock
3/8" balsa triangle
e Sides (make 2) F-4
Aft Fuselage Sides with Vertical Tails
Glue 3/8" x 7" strip of foam here to support fuselage top piece
Sides (make 2)
Turtledeck Top
(make 1 and trim to fit)