Professional Documents
Culture Documents
F-4
F-2
F-3 Fwd Fuselage Sides (make 2) 3/4" x 5/8" 1/64" ply
doublers on inboard side
Cut hole for servo (drill 3/16" hole for pivot Motor mount
bearing tubes)
Nosecone (press fit) (make 2 and
F-1
(make 10 with 6 mm Depron Dashed green lines indicate where laminate together)
(11 if BlueCore) and to attach foam strips
laminate together) 1/2" wide foam strip
Scale in inches
0 2 4
Wing
(make 1) Aft Fuselage Bottom
(make 1)
Stabilators
(make 2)
Vertical Tail
(make 1)