Professional Documents
Culture Documents
IX-2023
MANDATORY APPENDIX E
PERMITTED STANDARD WELDING PROCEDURE
SPECIFICATIONS (SWPSs)
E-100 INTRODUCTION
The SWPSs listed in this Appendix may be used in accordance with the rules of QW-500. SWPSs are generated and
managed by the American Welding Society (AWS).
E-200 BACKGROUND
The AWS revises, reaffirms, and amends SWPSs in accordance with American National Standards Institute (ANSI)
procedures as follows:
(a) Revised SWPSs. Revisions may or may not contain significant technical changes. When a revision to a published
SWPS occurs, a new edition of the SWPS is published. The year edition date is revised accordingly in the SWPS designation,
e.g., in B2.1-2-019:1994, the “1994” indicates the 1994 edition of that SWPS, published in 1994. The date of the super-
seded, previous edition of the SWPS is also noted on the cover page.
(b) Reaffirmed SWPSs. When reaffirmation occurs without revision to the SWPS, the letter “R” is added to the SWPS
designation along with the date of the reaffirmation, e.g.,“(R1998)” or “(R05).” There are no technical differences between
SWPSs of the same edition that have different reaffirmation dates. For example, the content of B2.1-1-020:1994 (R98) is
exactly the same as that in B2.1-1-020:1994 (R05).
(c) Amended SWPSs. Amendments are issued when essential for the prompt correction of an error that could be
misleading. When an amendment occurs, the suffix “AMD1” is added to the SWPS designation. The correction is incor-
porated into the existing text of the SWPS, which is reprinted and clearly marked as including the amendment(s). The
correction is identified in the revised Foreword of the amended SWPS.
358
ASME BPVC.IX-2023
GTAW
GTAW of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1∕16 through 11∕2 inch Thick B2.1-8-024 2001
GTAW
GTAW of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1∕16 through 11∕2 inch Thick B2.1-8-212 2001 (R12)
GTAW of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1∕8 through 11∕2 inch Thick B2.1-8-215 2001 and earlier
359
ASME BPVC.IX-2023
360