Professional Documents
Culture Documents
I Scope.............................................................. 2
II Conflicts and Deviations................................. 2
III References..................................................... 2
IV Modifications to Process Industry Practice
STS05130............................................... 3
I Scope
This Specification defines the requirements for the receipt, handling, erection,
assembly, and field inspection of structural and miscellaneous steel. Offshore structures
and pre-engineered metal buildings are excluded from this specification.
A. Any conflicts between this Specification and other applicable Saudi Aramco
Materials System Specifications (SAMSSs), Engineering Standards (SAESs),
Standard Drawings (SASDs) or industry standards, codes, and forms shall be
resolved in writing by the Company or Buyer Representative through the
Manager, Consulting Services Department.
B. Direct all requests to deviate from this Specification in writing to the Company or
Buyer Representative, who shall follow internal company procedure SAEP-302
and forward such requests to the Manager, Consulting Services Department of
Saudi Aramco, Dhahran.
III References
The selection of material and equipment, and the design, construction, maintenance, and
repair of equipment and facilities covered by this Specification shall comply with the
latest edition of the references listed below, unless otherwise noted.
Page 2 of 4
Document Responsibility: Onshore Structures Standards Committee 12-SAMSS-008
Issue Date: 25 December 2014
Next Planned Update: 25 December 2019 Erection of Structural and Miscellaneous Steel
The following paragraph numbers refer to PIP Standard STS05130 dated February,
2011, which is part of this specification. The text in each paragraph is an addition,
exception, modification, or deletion to STS05130 as noted. Paragraph numbers not
appearing in STS05130 are new paragraphs to be inserted in numerical order.
Page 3 of 4
Document Responsibility: Onshore Structures Standards Committee 12-SAMSS-008
Issue Date: 25 December 2014
Next Planned Update: 25 December 2019 Erection of Structural and Miscellaneous Steel
4.3.5.8 (Addition) When assembled, all joint surfaces, including those adjacent to
the bolt heads, nuts or washers, shall be free of burrs, dirt and other foreign
materials that would prevent solid seating of parts.
4.3.12.1 (Modification) Delete the reference to PIP STS05120 and replace it with
12-SAMSS-007.
Revision Summary
25 December 2014 Revised the Next Planned Update, reaffirmed the content of the document, and reissued
as major revision.
Page 4 of 4