Professional Documents
Culture Documents
Transport
Delta
I
2 Starship: Transport Delta
Index
Printing and Assembly Guide 3
A Note on OpenLOCK 3
Overview 3
Exterior 4
Print Count 4
Print settings 5
Supports 5
Assembly 5-9
Interior 10
Print List 10
Interior Variation 11
I
3 Starship: Transport Delta
A Note on OpenLOCK
We use the OpenLOCK clip from Printable Scenery. The clip is available for
free from their website:
https://www.printablescenery.com/product/open-lock/
Overview
The craft is printed in two sections, the interior, OpenLOCK Clips. The top of the exterior is designed
which is modular, and can be built using a variety to detach from the bottom, allowing a cutaway
of OpenLOCK compatible tiles available from 2nd look at the transport floor plan.
Dynasty, and the exterior, which combines using
I
4 Starship: Transport Delta
Exterior
The exterior of the craft is composed of a variety of larger parts that require some assembly. No glue is
necessary, as everything fits together with OpenLOCK parts.
Print Count
zYou will need to print:
z Circa 115 × OpenLOCK clips
z Transport - Lower Hull - Left Side - No Hardpoint.stl
z Transport - Lower Hull - Right Side - No Hardpoint.stl
z Transport - Upper Hull - Left Side - No Hardpoint.stl
z Transport - Upper Hull - Right Side - No Hardpoint.stl
z 2 × Transport - Extras - Engine.stl
z 8 × Transport - Extras - Landing Gear.stl
z 2 × Scout Ship Turret Barrel.stl
z Turret Ring 1.2.stl (replaces Turret Ring (Rear).stl)
z One each of everything else in the Fuselage folder
Print Settings
The transport prints well at 150 microns.
Supports
Parts should be orientated for optimal printing, make sure to add supports where needed to overhanging
sections. If you are having adhesion issues to the build plate, we recommend the use of a raft.
I
5 Starship: Transport Delta
Assembly
2 Then put the two halves together and finish with the cockpit.
I
6 Starship: Transport Delta
4 Turn the transport’s lower hull upside down and assemble the landing
gears.
I
7 Starship: Transport Delta
8 Assemble the airlock ring and door. Do the same with the turret and turret
ring. Clip them to their parts.
Interior
The interior is modular. This means essentially, you can combine interior parts to be whatever you like.
Print List
If you want to build the same layout as shown above, print out the following:
z 1 × Cockpit.stl z 4 × S Half Tube Corridor.stl
z 1 × AirlockDoor_A.stl z 1 × Special Bunk Free Standing.stl
z 8 × Bridge_Door_1.0.stl z 1 × Special Curved Corridor Bed Port.stl
z 2 × Thin door.stl z 1 × Special Curved Corridor Toilet.se
z 1 × DS Walkway Doorstep.stl z 8 × Special Double Plate Wedge.stl
z 1 × DS Walkway Ladder Flank.stl z 6 × Special Double Plate Wedge (reversed).stl
z 2 × E Corridor Intersection Floor Hatch.stl z 1 × Special Seating area.stl
z 1 × F Cargo Floor.stl z 1 × Special transport Hinged Ramp v2.stl
z 2 × Floor hatch.stl z 2 × AS Corridors I to Kitchenette shelves.stl
z 2 × I Engineering Standing Controls.stl z 2 × AS Engineering to Corridors I.stl
z 2 × I WC Shower unit.stl z Either 8 × AS Tube Doorway Simple.stl or 8 × AS
z 2 × I+ Engineering Ramp Special 3-4 Tube.stl Tubular Corridor Doorway B (built in supports).
z 8 × IA Base Deep.stl stl, or a combination of your choice
z 2 × IA Cargo Floor.stl z 2 × I Base Wall to Kitchenette.stl
z 7 × IIA Double Plate.stl z 3 × I Engineering Corner.stl
z 2 × IIA Engineering Ramp Special 3-4 Tube.stl z 2 × IA Engineering to Corridor.stl
z 6 × IIA Special Cargo Floor Walkway.stl z 1 × L Base to Double Lockers.stl
z 2 × S Cargo Floor SidebySide.stl z 2 × L Base to Engineering.stl
z 2 × S Cargo Floor Stacked.stl z 2 × L Corridors I Corner.stl
z 1 × S Cargo Floor Walkway Corner.stl z 1 × L Corridors I to Engineering.stl
z 5 × S Cargo Floor Walkway.stl z 1 × S Tube Corridor Double
z 1 × S Double Bunk with Locker (reversed).stl Doorway (may require supports).stl
z 1 × S Double Bunk with Locker.stl z 1 × Special Kitchenette Wall Transport.stl
z 3 × S Double Plate Side by Side.stl
I
11 Starship: Transport Delta
Interior Variation
This illustration shows a prototype of the Starship: Transport Delta interior that varies
from the layout above. Remember that ultimately, the layout of your transport is
completly up to you!