Professional Documents
Culture Documents
Op nbr 911-024
ПРЕДУПРЕЖДЕНИЕ
Горещото хидравлично масло и хидравличното масло под налягане могат да станат причина за тежки физически
наранявания.
ПРЕДУПРЕЖДЕНИЕ
Lower the digging units to the ground and stop the engine (start switch ON position). Operate the control levers several
times to release the remaining pressure in the hydraulic piping.
ЗАБЕЛЕЖКА!
Disconnected hoses, lines and connections must be plugged. Oil that drains from hoses, lines and connections should be
collected in a container.
Pipe replacing
1. Connect the vacuum pump, See : Hydraulic oil tank, vacuum-pumping, connecting and disconnecting pump
Figure 2
4. Remove screws, flanges (1, 2) and hose (3) of hydraulic oil pump side.
Figure 3
5. Install hose (3) and new O-ring, then flanges, screws (2, 1) on hydraulic pump side.
Figure 4
6. Install hose (1) and new O-ring on pipe (2) of hydraulic pump side.
Figure 5
Figure 6