Professional Documents
Culture Documents
Op nbr 00000
1. Remove sleeve (1) and cartridge form the main control valve.
Tools: Spanner 32 mm
Tightening torque: 6 kgf·m (43 lbf·ft)
ЗАБЕЛЕЖКА!
Set pressure is different according to position. Be sure to assemble it to its original position.
Figure 1
Removal, sleeve
2. Remove cap (2) and pull out spring (3) and servo hydraulic poppet (4).
3. Remove servo hydraulic seat (5) and pull out springs (6, 7), piston (8) and main poppet (9).
Figure 3
Removal, servo hydraulic seat, spring and main poppet