Professional Documents
Culture Documents
Pump accessories
Dosing
Contents
Installation kits
Installation kits for DME and DMS dosing pumps 4 Pulsation dampers
Installation kits for DMI, DDI, DMX and DMH dosing Pulsation dampers 43
pumps 5 Suction side 44
Discharge side, without diaphragm 45
Discharge side, with diaphragm, DN 8 47
Tubing Discharge side, with diaphragm, DN 20 48
Tubing 6 Discharge side, with diaphragm, DN 32 and DN 65 50
2
Overview of dosing system Pump accessories
Legend
Additional accessories
Accessory Page
Installation kit 4
Tubing 6
Foot valve 13
Hot-injection valve 30
Suction line 14
Level-control unit 22
Hand mixer 60
Water meter 65
3
Installation kits Pump accessories
GrA1008
Max. 6 m Fig. 3 Installation kit
Max. 2 m
TM02 2108 3401
4
Installation kits Pump accessories
Installation kits for DMI, DDI, DMX and DMH dosing pumps
Materials used in
Product
Size For pump type Contents injection valve and Suction line version
number
foot valve
96619330
Without switch
(553-048)
PVC / FKM / glass
Discharge tube, 4/6 mm, PE, 5 m 96612008
With switch
injection valve, R 1/4 (553-049)
suction tube, 4/6 mm, PVC, 2 x 1.5 m foot 96625609
valve Without switch
(553-063)
PP / FKM / PTFE
96620755
With switch
(553-064)
91835809
Without switch
(553-0701)
DN 4 DMI / DDI 209 up to 6 l/h PVC / FKM / glass
Discharge tube, 4/6 mm, PE, 5 m 91835811
With switch
injection valve, 1/4" NPT (553-0711)
suction tube, 4/6 mm, PVC, 2 x 1 5 m foot 91835808
valve Without switch
(553-070)
PP / FKM / PTFE
91835810
With switch
(553-071)
Discharge tube, 4/6 mm, PE, 5 m 96729316
Without switch
injection valve, 1/2" NPT (553-0708)
PVC / FKM / glass
suction tube, 4/6 mm, PVC, 2 x 1.5 m foot 96729317
valve With switch
(553-0709)
96376405
Without switch
(553-1012)
PVC / FKM / glass
96612007
Discharge tube, 6/12 mm, PVC, 5 m With switch
(553-1013)
injection valve, G 1/2
suction tube, 6/8 mm, PVC, 2 m foot valve 96636640
Without switch
(553-1014)
PP / FKM / glass
96636641
With switch
(553-1015)
DMI / DMX / DMH up to 50 l/h
91835824
Without switch
(553-1016)
PVC / FKM / glass
91835825
Discharge tube, 6/12 mm, PVC, 5 m With switch
(553-1017)
DN 8 injection valve, 1/2" NPT
suction tube, 6/8 mm, PVC, 2 m foot valve 91835826
Without switch
(553-1018)
PP / FKM / glass
91835827
With switch
(553-1019)
96690374
Without switch
(553-1573)
PVC / FKM / glass
Discharge tube, 6/12 mm, PVC, 5 m 96648165
With switch
DMI / DDI 222 / DMX / DMH injection valve, G 1/2 (553-1575)
up to 50 (60) l/h suction tube, 9/12 mm, PVC, 2 m foot 96729432
valve Without switch
(553-1574)
PP / FKM / glass
96688906
With switch
(553-1576)
5
Tubing Pump accessories
Tubing
Tubes in various materials, sizes and lengths.
6
Tubing Pump accessories
7
Pump connections Pump accessories
GR8353_p
Fig. 5 Hose nipple for hose clamp connection
GR2682
Fig. 6 Various pump connections
For pump type Connection type Internal/outside tube or pipe diameters/thread Material Product number
PP 96440468
4/6 mm
PVDF 96440469
PP 96440470
6/9 mm
PVDF 96440471
DME 2 Tube
PP 96440472
DME 8 6/12 mm
DME 12 PVDF 96440473
DME 19 PP 96440474
9/12 mm
DME 48 PVDF 96440475
DMS 2 –/10 mm PVC 96440462
DMS 4 Pipe cementing
–/12 mm PVC 96440464
DMS 8
PVC 96440456
DMS 12
PVDF 96440457
–/Rp 1/4
Internal thread SS *) 96484670 **)
SS *) 96440458 **)
–/Rp 3/8 SS *) 96440461 **)
PP 96535096
DME 60-150 Hose clamp 19/27 mm + 25/34 mm
PVDF 96535102
PP 96535103
DME 375-940 Hose clamp 32/41 mm + 38/48 mm
PVDF 96535104
*) Stainless steel, DIN 1.4401
**) Fits only stainless steel pumps.
8
Pump connections Pump accessories
9
Pump connections Pump accessories
DN 8
10
Pump connections Pump accessories
DN 20, DN 32 and DN 65
11
Pump connections Pump accessories
Adapters
Pump type
Connection Tubing ID/OD1) Material Product
type or thread number
PP 96434861
6/9 mm
PP 96434863 Adapter kits
PVDF 96434865
PP 96460449 Product Material Product number
Tube 6/12 mm PP/EPDM 96654631
PVDF 96460450
Adapter kit for DME 60 - 150 PP/FKM 96654633
DME 2 - 48 PP 96460447 Comprises one adapter with M30 x
9/12 mm PVDF/EPDM 96654634
DMS PVDF 96460448 3.5 thread.
PP 96460438 PVDF/FKM 96654635
0.17" / 1/4"
PVDF 96460439
PP 96460443 Union nut kits
1/4" / 3/8"
PVDF 96460444 Two union nuts in each kit.
PP 96460445
3/8" / 1/2"
PVDF 96460446 For pump type Union nut size Material Product number
PP 96534491 PP 91129724
Hose clamp 12/- mm
PVDF 96534493 DME 2 to 48
M30 x 3.5 PVDF 91129725
DMS
Internal 1/4" NPT SS *) 96731913 SS 96731918
thread 3/8" NPT SS *) 96637161 PP 96633937
19/27 mm PP 96535109 DME 60 and 150 1 1/4" PVDF 96633938
Hose clamp
25/34 mm PVDF 96535110 SS 96731917
PP 96608415 PP 96731916
PVDF 96608417 DME 375 and 940 2" PVDF 96731915
3/4" NPT
PVC 96537892 SS 96731914
DME 60 - 150
Internal SS *) 96537894
thread PP 96608413
PVDF 96608414
Rp 3/4
PVC 96533886
SS *) 96575256
32/41 mm PP 96535111
Hose clamp
38/48 mm PVDF 96535112
PP 96731912
PVDF 96731901
1 1/4" NPT
PVC 96537893
DME 375 - 940
Internal SS *) 96537895
thread PP 96608418
PVDF 96608419
Rp 1 1/4
PVC 96534799
SS *) 96575258
1) ID = Internal Diameter, OD = Outside Diameter
* Fits only stainless steel pumps.
** Stainless steel, DIN 1.4401.
12
Foot valves Pump accessories
Foot valve
Foot valve complete with non-return valve, strainer and
tube or pipe connection.
Valve kit
(non-return valve)
GR8109
Fig. 8 Foot valve, up to 60 l/h Fig. 9 Foot valve and valve kit, up to 60 l/h Fig. 10 Foot valve, 400 and 1150 l/h
13
Suction lines Pump accessories
14
Suction lines Pump accessories
15
Suction lines Pump accessories
GrA1005
Fig. 12 Rigid suction line
Rigid suction line for stationary tanks Rigid suction line for drums or tanks
The pump can be fitted on a wall bracket or directly The suction line is easy to remove if the drum or
on the tank. The tank is refilled from an external tank needs to be replaced. The pump is typically
tank. placed on a wall bracket.
The rigid suction line is available on request.
TM03 7216 4506 / TM03 7219 4506
Fig. 13 Rigid suction line for stationary tanks Fig. 14 Rigid suction line for drums or tanks
16
Suction lines Pump accessories
17
Suction lines Pump accessories
18
Suction lines Pump accessories
19
Suction lines Pump accessories
20
Suction lines Pump accessories
21
Suction lines Pump accessories
Level-control unit
The level-control unit is suitable for dosing pumps with
level-control input, complete with level sensors, cera-
mic weight, cable and plug for pump connection.
Electrical data
GrA1012
Level plug type: M12, 4-pole
Max. load of level contacts: 50 V, 0.5 A
Function of level contacts: Low level/empty tank
Fig. 16 Level-control unit
Level switch
Switches Materials
Cable length
Plug Contact position *) Product number
[m] Body
Empty Pre-empty
96295882
M12 NO NO 10 PVC
(531-0312.1-10000)
96728750
M12 NO - 10 PVC
(531-0312.1-10001)
96728751
M12 NO NO 10 PP
(531-0312.1-10002)
96728752
M12 NC NC 10 PP
(531-0312.1-10003)
*) NO = Normally Open, NC = Normally Closed
22
Injection valve Pump accessories
Standard versions
Standard versions designed for DME and DMS
pumps
Injection valve complete with spring-loaded non-return
valve, injection pipe and tube or pipe connection.
Spring material: Hastelloy.
Opening pressure
DN 4, DN 8: 0.7 bar
DN 20: 1.1 bar
Maximum temperature
PP, PVDF: 50 °C
PVC: 40 °C
Stainless steel 80 °C
d
L
Valve kit
(non-return valve)
TM01 9278 3100/TM02 6433
GR8107
Gr7098
Fig. 17 Dimensions of injection valve, up to Fig. 18 Injection valve, up to 60 l/h Fig. 19 Injection valve, 400 and 1150 l/h
60 l/h
23
Injection valve Pump accessories
24
Injection valve Pump accessories
Standard version, DN 4
Maximum flow: 6 l/h.
25
Injection valve Pump accessories
26
Injection valve Pump accessories
Standard version, DN 20
Maximum flow: 500 l/h.
27
Injection valve Pump accessories
Standard version, DN 32
Maximum flow: 1500 l/h.
The threaded parts are made of stainless steel.
Standard version, DN 65
Maximum flow: 4000 l/h.
TM03 8629 2107
28
Injection valve Pump accessories
GrA1013p
Fig. 27 Injection valve with lip valve Fig. 28 Injection valve with lip valve
29
Injection valve Pump accessories
GR 7506_p
Tube connection PVDF 6/9 mm
Cooling pipe
Material Max. operating pressure Length
Connection Size Product number
Pipe Gasket [bar] [mm]
96727309
420
(522-095)
5/8” DN 8 SS FKM 100
96727310
1000
(522-096)
30
Injection valve Pump accessories
31
Injection valve Pump accessories
DN 4 00 Standard version
01
(up to 6 l/h) 04 O-ring loaded
00 Standard version
DN 20 00 Standard version
03
(up to 500 l/h) 06 Water line connection, stainless steel
DN 32 00 Standard version
04
(up to 1500 l/h) 06 Water line connection, stainless steel
07 DN 65 00 Standard version
Maximum pressure [bar]
Materials of construction
See pump valves.
Valve type
See pump valves.
Tube/pipe connection
See pump connections.
Water line connection
10 G 1/4
11 1/4" NPT
20 G 1/2
21 1/2" NPT
30 G1
31 1" NPT
40 G2
41 2” NPT
70 Flange, DN 80
Immersion depth [mm]
32
Pressure-relief valves Pump accessories
DN 4/DN 8
The adjustable valve is suitable for installation in the
discharge tube.
The valve is fitted in a T-connection with the valve outlet
connected to the tank. The valve functions as a pres-
sure-relief valve or a safety valve, protecting the pump
and the discharge tube against excessive pressures.
GrA1042
Diaphragm material: PTFE
TM 03 2407 4105
Fig. 34 Dimensions of relief valve, DN 4/DN 8
33
Pressure-relief valves Pump accessories
DN 20
The adjustable valve is suitable for installation in the
discharge tube.
The valve is fitted in a T-connection with the valve outlet
connected to the tank. The valve functions as a pres-
sure-relief valve or a safety valve, protecting the pump
and the discharge tube against excessive pressures.
GrA1041
Diaphragm material: PTFE
34
Pressure-relief valves Pump accessories
DN 32
The adjustable valve is suitable for installation in the
discharge tube.
The valve is fitted in a T-connection with the valve outlet
connected to the tank. The valve functions as a pres-
sure-relief valve or a safety valve, protecting the pump
and the discharge tube against excessive pressures.
GrA1041
Diaphragm material: PTFE
35
Pressure-relief valves Pump accessories
DN 65
The pressure-relief valve protects the discharge pipe-
work against too high pressures.
Features
• overflow function by a diaphragm spring system
• bypass valves with a connected T-piece
• opening pressure of 10 bar.
Dimensions
Max. flow rate Material Product
Size Supported connections L H h D
[l/h] body/gasket number
[mm] [mm] [mm] [mm]
96727367
PP/FKM Flange, DN 65 326 230 195 130
(525-0612)
96638486
PVC/FKM Flange, DN 65 266 230 195 130
(525-0610)
DN 65 4000
96635246
PVC/EPDM Flange, DN 65 266 230 195 130
(525-0611)
96694434
SS*)/FKM Flange, DN 65 394 243 203 198
(525-0613)
*) Stainless steel, DIN 1.4571
36
Pressure-loading valves Pump accessories
DN 4/DN 8
The adjustable valve is suitable for installation in the
discharge tube.
The valve is fitted in-line. It functions as a counter-pres-
sure valve, optimising dosing accuracy into systems
with fluctuating pressure. The valve also functions as
an anti-siphoning valve when dosing into pressureless
systems.
GrA1036
Pressure range: 0 to 10 bar
Diaphragm material: PTFE
37
Pressure-loading valves Pump accessories
DN 20
The adjustable valve is suitable for installation in the
discharge tube.
The valve is fitted in-line. It functions as a counter-pres-
sure valve, optimising dosing accuracy into systems
with fluctuating pressure. The valve also functions as
an anti-siphoning valve when dosing into pressureless
systems.
GrA1037
Pressure range: 0 to 10 bar
Diaphragm material: PTFE
38
Pressure-loading valves Pump accessories
DN 32
The adjustable valve is suitable for installation in the
discharge tube.
The valve is fitted in-line. It functions as a counter-pres-
sure valve, optimising dosing accuracy into systems
with fluctuating pressure. The valve also functions as
an anti-siphoning valve when dosing into pressureless
systems.
GrA1037
Pressure range: 0 to 10 bar
Diaphragm material: PTFE
39
Pressure-loading valves Pump accessories
DN 65
Use this valve in either of these cases:
• if the dosing system has no counter-pressure
• if the counter-pressure varies or fluctuates
• if the injection point is at a lower level than the
pump.
The opening pressure is adjustable by a spring-loaded
screw. The factory-set opening pressure is 3 bar.
The valve works according to the dynamic pressure
Dimensions
Max. flow rate Product
Size Material body/gasket Supported connections L H h D
[l/h] number
[mm] [mm] [mm] [mm]
96727367
PP/FKM Flange, DN 65 326 230 195 130
(525-0612)
96638486
PVC/FKM Flange, DN 65 266 230 195 130
(525-0610)
DN 65 4000
96635246
PVC/EPDM Flange, DN 65 266 230 195 130
(525-0611)
96694434
SS*)/FKM Flange, DN 65 280 243 203 198
(525-0613)
*) Stainless steel, DIN 1.4571
40
Multi-function valve Pump accessories
Multi-function valve
The multi-function valve is a compact valve unit for
direct mounting on the pump discharge connection. The
valve has these functions:
• constant counter-pressure
• anti-siphoning
• pump protection
• manual pressure relief.
Legend
Pos. Description
1 Green knob (turn for deaeration)
2 Pressure-relief outlet
Dimensions
41
Multi-function valve Pump accessories
Overflow pressure
Pump connection Materials of connectors/gaskets Connector, discharge side/overflow side
[bar]
Material of connectors Connector type
PP = Polypropylene B6 = Pipe, 4/6 mm
PVC = Polyvinyl chloride A5 = Tube, 5/8 mm
4 = Tube, 6/9 mm
Material of gaskets 6 = Tube, 9/12 mm
E = EPDM R = Tube, 1/4" / 3/8"
V = FKM S = Tube, 1/2" / 3/8"
T = PTFE B3 = Welding diameter,16 mm
A9 = Threaded, 1/2" NPT, male
U1 = Combined tube, 4/6, 6/12 mm,
cementing diameter 12 mm
U2 = Combined tube, 4/6 mm, 6/9 mm,
9/12 mm
Overflow pressure
Pump connection Materials of connectors/gaskets Connector, discharge side/overflow side
[bar]
A5A5
RR
PP/V
SS
PP/E
B3B3
M30 U2U2
10
3/8”
16 B6B6
5/8”
44
PV/T 66
B3B3
A9A9
U1U1
44
3/8” 10 PVC/V 66
5/8” 16 PVC/E RR
SS
A9A9
42
Pulsation dampers Pump accessories
Pulsation dampers
The damper is particularly suitable for long discharge
tubes and/or small-diameter lines.
Installed in the discharge tube, the damper optimises
dosing accuracy and protects pump and discharge line
against pressure surges.
Depending on the system pressure, the installation of a
counter-pressure valve after the damper may be
required to optimise its function.
43
Pulsation dampers Pump accessories
Suction side
Material Connection Connection
Vol- Nominal P max (tubing/pipe) Product
Suitable for *) thread (or Note
ume [l] diameter Body Seals [bar] number
flange) ID/OD2) or thread
DMI 91835549
FKM 2 G1 12/16 mm, 16/20 mm
DDI 209 (516-4133)
DDI 222 DN 15 PVC
96688101
DMX 221 EPDM 2 G1 12/16 mm, 16/20 mm
(516-4132)
1 DMX 226 40/-59/-65/-67-80/95/-105/- 1)
120/-123/-130/-160/-199/-210/-240/- 96690350
DN 10 PVDF PTFE 6 G 3/4 14/16 mm
250 (516-4011)
DMH 251, 252, 253, 254 96688107
DMS; all DME except 375-10/940-4 DN 8 SS 40 G 1/4 i
(516-513)
96688102
FKM 2 G 1 1/2 20/25 mm, 25/32 mm
(516-4232)
DN 25 PVC
DMX 226 96/ 100/ 152/ 165/ 193/ 200/ 96654767
EPDM 2 G 1 1/2 20/25 mm, 25/32 mm
321/ 330/ 385/ 400/ 510/ 630/ 720 (516-4231)
3 1)
DMH 255 96688100
DME 375-10/940-4 DN 10 PVDF PTFE 6 G 3/4 14/16 mm
(516-4021)
96688108
DN 20 SS 40 G 3/4 i
(516-523)
96688103
FKM 2 G 2 1/4 32/40 mm, 40/50 mm
(516-4332)
DN 40 PVC
96653755
5 DMH 257 EPDM 2 G 2 1/4 32/40 mm, 40/50 mm 1)
(516-4331)
96688109
DN 20 SS 25 G 3/4 i
(516-533)
96688104
DN 50
(516-464)
PP FKM 6
96688105
DN 65
DMX 227 430/ 860/ 1120 DN 50 (516-4641)
20
and other dosing pumps DN 65 96688110
DN 50
(516-554)
SS 6
95702959
DN 65
(516-5541)
96638463
DN 50
(516-474)
PP FKM 4
96688106
DN 65
DMX 227 770/ 1520/ 2000 DN 50 (516-4741)
40
and other dosing pumps DN 65 96688111
DN 50
(516-564)
SS 4
96688112
DN 65
(516-5641)
* Not suitable in every case, please check with calculation based on layout.
1) Connectors may not be standard pump connector sizes.
2) ID = Internal Diameter, OD = Outside Diameter.
44
Pulsation dampers Pump accessories
45
Pulsation dampers Pump accessories
Materials Connection
Nomi- Connection
Volume P max Pipe
Suitable for *) nal thread or Tubing Note Product number
[l] Body Seals [bar] ID/OD3)
width flange ID/OD3)
or thread
96688139
FKM 10 DN 32 32/40 mm
(517-1011-10000)
PVC
96688140
EPDM 10 DN 32 32/40 mm
(517-1012-10000)
DME 940-4 96688142
DMX 226 510/ 630/ 720 FKM 10 DN 32 32/40 mm
(517-1041-10000)
DMH 254 102/ 143/ 175/ 202/ 276 PP
96688143
10 p>5 bar DN 32 EPDM 10 DN 32 32/40 mm
(517-1042-10000)
DMH 254 97/ 136/ 166/ 213/ 291
5<p<10 bar 96688144
FKM 10 DN 32 32/40 mm
DMH 255 5<p<10 bar (517-1051-10000)
PVDF
96688145
EPDM 10 DN 32 32/40 mm
(517-1052-10000)
96688141
SS 16 DN 32 2)
(517-1024-10000)
96688146
DN 50 50/63 mm
(517-1141-10000)
FKM 6
96688149
DN 65 65/75 mm
(517-1341-10000)
PP
96688147
DN 50 50/63 mm
DMX 227 430/ 860/ 1120 DN 50 (517-1142-10001)
20 EPDM 6
DMH 257 DN 65 96688150
DN 65 65/75 mm
(517-1342-10000)
96639884
DN 50 2)
(517-1124-10001)
SS 6
96688148
DN 65 2)
(517-1324-10000)
96638405
FKM 4 DN 65 65/75 mm
(517-1441-10001)
PP
96688152
40 DMX 227 770/ 1520/ 2000 DN 65 EPDM 4 DN 65 65/75 mm
(517-1442-10000)
96688151
SS 4 DN 65 2)
(517-1424-10001)
* Not suitable in every case, please check with calculation based on layout.
1) Both connections are included.
2) Counter flange is not included.
3) ID = Internal Diameter, OD = Outside Diameter.
Options
• pressure gauge
• different connector on request.
46
Pulsation dampers Pump accessories
* Not suitable in every case, please check with calculation based on layout.
1) Basic type.
2) Mounting material and connection is included.
3) Pre-charge pressure: 2.7 bar.
4) ID = Internal Diameter, OD = Outside Diameter.
Options
• different connection
• different pre-charge pressure
• pressure gauge.
47
Pulsation dampers Pump accessories
48
Pulsation dampers Pump accessories
Material Connection
Connection
Volume Nominal Dia- P max Pipe
Suitable for *) thread (or Tubing Note Product number
[l] width Body phragm [bar] ID/OD4) or
flange) ID/OD4)
(seals) thread
95702068
G1 1)
(517-2511)
FKM 10
96688186
13/20 mm 20/25 mm 2) 3)
(517-2511-10000)
PVC
95702069
G1 1)
(517-2512)
EPDM 10
96688187
13/20 mm 20/25 mm 2) 3)
(517-2512-10000)
95702070
G 3/4 1)
(517-2521)
FKM 40
96688188
G 3/4 i 2) 3)
(517-2521-10000)
SS
95701994
G 3/4 1)
DME 940-4 (517-2522)
1.4 DN 20 EPDM 40
DMH 255 above 5 bar 96688189
G 3/4 i 2) 3)
(517-2522-10000)
95702071
G1 1)
(517-2541)
FKM 10
96688190
20/25 mm 2) 3)
(517-2541-10000)
PP
95702072
G1 1)
(517-2542)
EPDM 10
96688191
20/25 mm 2) 3)
(517-2542-10000)
95702073
G 3/4 1)
(517-2553)
PVDF PTFE 20
96736538
20/25 mm 2) 3)
(517-2553-10002)
* Not suitable in every case, please check with calculation based on layout
1) Basic type.
2) Mounting material and connection is included.
3) Pre-charge pressure: 2.7 bar.
4) ID = Internal Diameter,OD = Outside Diameter.
Options
• different connection
• different pre-charge pressure
• pressure gauge.
49
Pulsation dampers Pump accessories
50
Pulsation dampers Pump accessories
Material Connection
Connection
Volume Nominal Dia- P max Pipe
Suitable for *) thread (or Tubing Note Product number
[l] width Body phragm [bar] ID/OD4) or
flange) ID/OD4)
(seals) thread
95702088
G2 1)
(517-2811)
FKM 10
96688205
65/75 mm 2) 3)
(517-2811-10001)
PVC
95702089
G2 1)
(517-2812)
EPDM 10
96688206
65/75 mm 2) 3)
(517-2812-10001)
Duplex versions of DMX 95702090
9.5 DN 65 FKM 30 G2 1)
227 and DMH 257 (517-2821)
SS
95702091
EPDM 30 G2 1)
(517-2822)
95702092
FKM 10 G2 1)
(517-2841)
PP
95702093
EPDM 10 G2 1)
(517-2842)
95702094
PVDF PTFE 20 G 1 1/4 1)
(517-2853)
* Not suitable in every case, please check with calculation based on layout.
1) Basic type. Options
2) Mounting material and connection is included.
• different connection
3) Pre-charge pressure: 2.7 bar.
4) ID = Internal Diameter,OD = Outside Diameter. • different pre-charge pressure
• pressure gauge.
51
Tanks Pump accessories
670
Material thickness: 4 mm
540
Max. material temperature: +50 °C
Minimum –20 °C
Liquid temperature:
Maximum +45 °C.
M5
98
500
98
98
Gr7309
137
Mounting combination
Single or parallel mounting of DME, 0-48 l/h, and DMS.
The tank is prepared for the fitting of a 3/4" RG draining
plug.
52
Tanks Pump accessories
Cylindrical tank
The closed, cylindrical tank has screw cap and
threaded connection for a rigid suction line.
All tanks are transparent and have a green cap.
Material: PE
Min. –20 °C
Permissible liquid temperature:
Max. +45 °C
GrA1049
Fig. 50 Cylindrical tank
Dimensions
Fig. 53 Tank, 100, 200, 300 and 500 litres Fig. 54 Tank, 1000 litres
53
Tanks Pump accessories
Dimensions
Prepared for mounting of:
[mm]
Standard agita-
DMH 251-253
DME 375-940
Size Weight Product
DME 60-150
Component
DME 19-48
[l] [kg] number
DME 2-12
∅D ∅d
DMH 254
DMX 221
DMX 226
H1 H2
DDI 209
DDI 222
DMS
DMI
tor
96688081
Tank, 40 l, PE 40 - 3) 3) - - - 3) - 3) - - 5) - 420 160 420 350 3.4
(502-0040)
96688082
Tank, 75 l, PE 75 - 4) 4) 3) 3) 3) 5) 5) 5) 5) - 3) - 460 160 630 530 6.0
(502-0075.1)
91836501
Tank, 100 l, PE 100 1) 4) 4) 3) 3) 3) 5) 5) 5) 5) - 3) - 460 160 790 690 7.5
(502-0100.1)
96690348
Tank, 200 l, PE 200 1) 4) 4) 3) 3) 3) 5) 5) 5) 5) - 3) - 600 160 880 780 12
(502-0200.1)
96688084
Tank, 300 l, PE 300 - 3) 3) 3) 3) 3) 3) 3) 3) 3) - 3) - 670 160 1030 930 13
(502-0300.1)
96690349
Tank, 500 l, PE 500 - 3) 3) 3) 3) 3) 3) 3) 3) 3) - 3) - 790 160 1180 1080 24
(502-0500.1)
96688085
Tank, 500 l, PE reinforced 500 2) 3) 3) 3) 3) 3) 3) 3) 3) 3) - 3) - 790 160 1180 1080 28
(502-0502.1)
96688086
Tank, 1000 l, PE 1000 - 3) 3) 3) 3) 3) 3) 3) 3) 3) 3) 3) 3) 1080 160 1260 1150 40
(502-1001)
96689131
Tank, 1000 l, PE reinforced 1000 2) 3) 3) 3) 3) 3) 3) 3) 3) 3) 3) 3) 3) 1080 160 1260 1150 48
(502-1002.1)
1) With inserts.
2) Reinforced for agitator.
3) New holes must be drilled.
4) Adapter plate required.
5) Pump fits with sintered, threaded holes in the tank.
Containment tank
Material: PE
Colour: Transparent
Dimensions
For tank size Volume
(diameter x height) Product number
[l] [l]
[mm]
96731237
40 80 500 x 545
(68.0170-01)
96700572
75 - 100 150 650 x 540
(68.0168-01)
96731303
200 - 300 400 770 x 960
(68.0164-01)
96706323
500 1000 1150 x 1080
(60.2141-01)
96731306
1000 1180 1310 x 900
(63.0610)
54
Tanks Pump accessories
Fig. 56 Lateral discharge device Fig. 57 Lateral discharge device Fig. 58 Dissolving hopper
DN 4 / DN 8 DN 20
55
Wall bracket Pump accessories
Wall bracket
Wall bracket for easy installation of a dosing pump on a
wall.
Dimensions
221
133 123.5
121
75
A-A
A ø5
TM02 4306 0402
ø3.5
56
Agitators and mixers Pump accessories
Electric agitator
Electric agitators ensure homogeneous mixing of the
chemical solution in the tank. It is necessary to ensure
thorough mixing of powder additives and liquid addi-
tives that do not easily dissolve in liquids.
The agitator is fitted with a single- or three-phase
motor, an agitator shaft connected directly to the motor
shaft and a polypropylene mixing turbine or stainless
steel propeller.
The selection of agitator size depends on the sub-
stance to be mixed. Choose an agitator with a higher
power input for stabilising insoluble suspensions or
emulsions that are not readily miscible.
GrA1004
Shaft and propeller must be submerged into the liquid
during operation to prevent dry-running.
Fig. 60 Electric agitator
Agitator shaft version Description
• The shaft is PP-coated, the mixing tur-
bine is made of PP.
Plastic shaft
• The ring-shaped turbine takes in the
mixture axially and spreads it radially.
• The shaft is equipped with a sealing
Plastic shaft for aggressive
flange fastened at the motor flange for
liquids
use with aggressive liquids.
• The shaft and mixing propeller are
Stainless steel shaft
made of stainless steel.
57
Agitators and mixers Pump accessories
Protec-
Shaft For tank Sealing Motor
tion class/ Speed
Agitator length size Material flange Voltage/frequency power Product number
insula- [rpm]
[mm] [l] included [kW]
tion class
230/400 V, 50/60 Hz, 96295813
3 x 400 V, 50/60 Hz, 0.09 kW, 500, SS 500 - SS - IP 65/F 0.09 1500
440/480 V, 60 Hz (509-11.1-10008)
96295814
1 x 230 V, 50/60 Hz, 0.09 kW, 500, SS 500 - SS - 220-240 V, 50/60 Hz IP 65/F 0.09 1500
(509-11.1-10009)
230/400 V, 50/60 Hz 96295822
3 x 400 V, 50/60 Hz, 0.09 kW, 500, PP 500 - PP - IP 65/F 0.09 1500
440/480 V, 60 Hz (509-12.1-10005)
96295823
1 x 230 V, 50/60 Hz, 0.09 kW, 500, PP 500 - PP - 220-240 V, 50/60 Hz IP 65/F 0.09 1500
(509-12.1-10006)
230/400 V, 50/60 Hz, 96295831
3 x 400 V, 50/60 Hz, 0.09 kW, 500, PP-F 500 - PP • IP 65/F 0.09 1500
440/480 V, 60 Hz (509-13.1-10005)
96295832
1 x 230 V, 50/60 Hz, 0.09 kW, 500, PP-F 500 - PP • 220-240 V 50/60 Hz IP 65/F 0.09 1500
(509-13.1-10006)
230/400 V, 50/60 Hz, 96295815
3 x 400 V, 50/60 Hz, 0.09 kW, 600, SS 650 100 SS - IP 65/F 0.09 1500
440/480 V, 60 Hz (509-21.1-10010)
96295816
1 x 230 V, 50/60 Hz, 0.09 kW, 600, SS 650 100 SS - 220-240 V, 50/60 Hz IP 65/F 0.09 1500
(509-21.1-10011)
230/400 V, 50/60 Hz, 96295824
3 x 400 V, 50/60 Hz, 0.09 kW, 600, PP 650 100 PP - IP 65/F 0.09 1500
440/480 V, 60 Hz (509-22.1-10005)
96295825
1 x 230 V, 50/60 Hz, 0.09 kW, 600, PP 650 100 PP - 220-240 V, 50/60 Hz IP 65/F 0.09 1500
(509-22.1-10006)
230/400 V, 50/60 Hz, 96295833
3 x 400 V, 50/60 Hz, 0.09 kW, 600, PP-F 650 100 PP • IP 65/F 0.09 1500
440/480 V, 60 Hz (509-23.1-10005)
96295834
1 x 230 V, 50/60 Hz, 0.09 kW, 600, PP-F 650 100 PP • 220-240 V, 50/60 Hz IP 65/F 0.09 1500
(509-23.1-10006)
230/400 V, 50/60 Hz, 96295817
3 x 400 V, 50/60 Hz, 0.09 kW, 750, SS 750 200 SS - IP 65/F 0.09 1500
440/480 V, 60 Hz (509-31.1-10006)
96295818
1 x 230 V, 50/60 Hz, 0.09 kW, 750, SS 750 200 SS - 220-240 V, 50/60 Hz IP 65/F 0.09 1500
(509-31.1-10007)
230/400 V, 50/60 Hz, 96295826
3 x 400 V, 50/60 Hz, 0.09 kW, 750, PP 750 200 PP - IP 65/F 0.09 1500
440/480 V, 60 Hz (509-32.1-10004)
96295827
1 x 230 V, 50/60 Hz, 0.09 kW, 750, PP 750 200 PP - 220-240 V, 50/60 Hz IP 65/F 0.09 1500
(509-32.1-10005)
230/400 V, 50/60 Hz, 96295835
3 x 400 V, 50/60 Hz, 0.09 kW, 750, PP-F 750 200 PP • IP 65/F 0.09 1500
440/480 V, 60 Hz (509-33.1-10004)
96295836
1 x 230 V, 50/60 Hz, 0.09 kW, 750, PP-F 750 200 PP • 220-240 V, 50/60 Hz IP 65/F 0.09 1500
(509-33.1-10005)
230/400 V, 50/60 Hz, 96295819
3 x 400 V, 50/60 Hz, 0.09 kW, 900, SS 900 300 SS - IP 65/F 0.25 1500
440/480 V, 60 Hz (509-41-10007)
230/400 V, 50/60 Hz, 96295828
3 x 400 V, 50/60 Hz, 0.09 kW, 900, PP 900 300 PP - IP 65/F 0.25 1500
440/480 V, 60 Hz (509-42-10006)
230/400 V, 50/60 Hz, 96295837
3 x 400 V, 50/60 Hz, 0.09 kW, 900, PP-F 900 300 PP • IP 65/F 0.25 1500
440/480 V, 60 Hz (509-43-10004)
230/400 V, 50/60 Hz, 96295820
3 x 400 V, 50/60 Hz, 0.09 kW, 1050, SS 1050 500 SS - IP 65/F 0.25 1500
440/480 V, 60 Hz (509-51-10006)
230/400 V, 50/60 Hz, 96295829
3 x 400 V, 50/60 Hz, 0.09 kW, 1050, PP 1050 500 PP - IP 65/F 0.25 1500
440/480 V, 60 Hz (509-52-10003)
230/400 V, 50/60 Hz, 96295838
3 x 400 V, 50/60 Hz, 0.09 kW, 1050, PP-F 1050 500 PP • IP 65/F 0.25 1500
440/480 V, 60 Hz (509-53-10003)
230/400 V, 50/60 Hz, 96295821
3 x 400 V, 50/60 Hz, 0.09 kW, 800, SS 800 1000 SS - IP 55/F 0.55 1500
460 V, 60 Hz (509-61-10006)
230/400 V, 50/60 Hz, 96295830
3 x 400 V, 50/60 Hz, 0.09 kW, 800, PP 800 1000 PP - IP 55/F 0.55 1500
460 V, 60 Hz (509-62-10004)
230/400 V, 50/60 Hz, 96295839
3 x 400 V, 50/60 Hz, 0.09 kW, 800, PP-F 800 1000 PP • IP 55/F 0.55 1500
460 V, 60 Hz (509-63-10003)
Note: The agitators come without supply cable.
58
Agitators and mixers Pump accessories
Dimensions
Agitator L A B C ∅d ∅D' ∅d' ∅E F Product number
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
96295813
3 x 400 V, 50/60 Hz, 0.09 kW, 500, SS 500 210 140 115 80 12 80 16 9 95
(509-11.1-10008)
96295814
1 x 230 V, 50/60 Hz, 0.09 kW, 500, SS 500 210 140 115 80 12 80 16 9 95
(509-11.1-10009)
96295822
3 x 400 V, 50/60 Hz, 0.09 kW, 500, PP 500 210 140 115 80 12 80 16 9 95
(509-12.1-10005)
96295823
1 x 230 V, 50/60 Hz, 0.09 kW, 500, PP 500 210 140 115 80 12 80 16 9 95
(509-12.1-10006)
96295831
3 x 400 V, 50/60 Hz, 0.09 kW, 500, PP-F 500 210 140 115 80 12 80 16 9 95
(509-13.1-10005)
96295832
1 x 230 V, 50/60 Hz, 0.09 kW, 500, PP-F 500 210 140 115 80 12 80 16 9 95
(509-13.1-10006)
96295815
3 x 400 V, 50/60 Hz, 0.09 kW, 600, SS 650 210 140 115 80 12 80 16 9 95
(509-21.1-10010)
96295816
1 x 230 V, 50/60 Hz, 0.09 kW, 600, SS 650 210 140 115 80 12 80 16 9 95
(509-21.1-10011)
96295824
3 x 400 V, 50/60 Hz, 0.09 kW, 600, PP 650 210 140 115 80 12 80 16 9 95
(509-22.1-10005)
96295825
1 x 230 V, 50/60 Hz, 0.09 kW, 600, PP 650 210 140 115 80 12 80 16 9 95
(509-22.1-10006)
96295833
3 x 400 V, 50/60 Hz, 0.09 kW, 600, PP-F 650 210 140 115 80 12 80 16 9 95
(509-23.1-10005)
96295834
1 x 230 V, 50/60 Hz, 0.09 kW, 600, PP-F 650 210 140 115 80 12 80 16 9 95
(509-23.1-10006)
96295817
3 x 400 V, 50/60 Hz, 0.09 kW, 750, SS 750 210 140 115 90 12 80 16 9 95
(509-31.1-10006)
96295818
1 x 230 V, 50/60 Hz, 0.09 kW, 750, SS 750 210 140 115 90 12 80 16 9 95
(509-31.1-10007)
96295826
3 x 400 V, 50/60 Hz, 0.09 kW, 750, PP 750 210 140 115 90 12 80 16 9 95
(509-32.1-10004)
96295827
1 x 230 V, 50/60 Hz, 0.09 kW, 750, PP 750 210 140 115 90 12 80 16 9 95
(509-32.1-10005)
96295835
3 x 400 V, 50/60 Hz, 0.09 kW, 750, PP-F 750 210 140 115 90 12 80 16 9 95
(509-33.1-10004)
96295836
1 x 230 V, 50/60 Hz, 0.09 kW, 750, PP-F 750 210 140 115 90 12 80 16 9 95
(509-33.1-10005)
96295819
3 x 400 V, 50/60 Hz, 0.25 kW, 900, SS 900 237 160 130 110 18 100 25 9 110
(509-41-10007)
96295828
3 x 400 V, 50/60 Hz, 0.25 kW, 900, PP 900 237 160 130 110 18 100 25 9 110
(509-42-10006)
96295837
3 x 400 V, 50/60 Hz, 0.25 kW, 900, PP-F 900 237 160 130 110 18 100 25 9 110
(509-43-10004)
96295820
3 x 400 V, 50/60 Hz, 0.25 kW, 1050, SS 1050 237 160 130 110 18 100 25 9 110
(509-51-10006)
96295829
3 x 400 V, 50/60 Hz, 0.25 kW, 1050, PP 1050 237 160 130 110 18 100 25 9 110
(509-52-10003)
96295838
3 x 400 V, 50/60 Hz, 0.25 kW, 1050, PP-F 1050 237 160 130 110 18 100 25 9 110
(509-53-10003)
96295821
3 x 400 V, 50/60 Hz, 0.55 kW, 800, SS 800 234 160 130 130 26 100 32 9 110
(509-61-10006)
96295830
3 x 400 V, 50/60 Hz, 0.55 kW, 800, PP 800 234 160 130 130 26 100 32 9 110
(509-62-10004)
96295839
3 x 400 V, 50/60 Hz, 0.55 kW, 800, PP-F 800 234 160 130 130 26 100 32 9 110
(509-63-10003)
59
Agitators and mixers Pump accessories
Hand mixer
Hand mixer with adjustable length for mixing of chemi-
cals in a tank. The mixer is designed for Grundfos All-
dos chemical tanks, sizes 40 - 500 litres.
The length is adapted to the corresponding tank before
delivery. In case of separate delivery, the hand knob is
not glued on.
Dimensions
60
Automatic venting valve Pump accessories
With timer
The timer is fitted on the solenoid and the opening inter-
vals have been preset on the timer. The timer is con-
nected to the main power supply.
Without timer
The valve is normally closed; when energized, the
valve opens. The opening can be controlled by an inde-
pendent relay contact or via the AR relay on the DME/
DMS pumps.
GrA3222p
Fig. 65 Automatic venting valve on DME
TM03 8685 2107
Legend
Material
Pos. Description
Body Gasket Ball
1 Non return valve PVDF FKM Ceramic
2 Connection piece PVC - - TM03 8222 0807
3 O-ring - FKM -
4 Valve body PVC - -
5 O-ring - FKM -
6 Connection piece PVC - -
7 Nut, M30 x 3.5 PVDF - - Fig. 66 Dimensional sketch of the automatic venting
9 Valve piston PVDF - - valve
10 Solenoid - - -
11 Power connector - - -
Voltage
Pump type Connections Timer Product number
230 V 115 V
96616026
•
(553-1585)
96616028
•
DME/DMS (553-1588)
M30 x 3.5
up to 48 l/h 96616027
• •
(553-1586)
96616029
• •
(553-1589)
Adapter kits
Adapter kits are available for the mounting on DME 60 and DME 150 pumps. See page 12.
61
Diaphragm leakage sensor Pump accessories
GR 8211p
• M12 plug and wire to transmit signal to pump.
When the liquid gets into contact with the sensor, the
light refraction changes, causing the sensor to emit a
signal.
The signal emitted from the sensor triggers the pump to
stop dosing and give pump output alarm.
Cable length
Pump type Size Type Product number
[m]
DME (60-940 l/h) M12 Leakage sensor, M12 0.5 m 96534443
62
Dosing monitor Pump accessories
Dosing monitor
The dosing monitor is suitable for use in connection
with the dosing monitoring function of DME, DMS-A and
DMS-AR pumps.
The monitor surveys the dosing process and sends a
signal to the pump if an error occurs.
Materials in contact with liquid: PP/EPDM or PP/FKM.
GrA1033
Fig. 67 Dosing monitor
Technical data
Product numbers
Product numbers
Materials in contact with the liquid (body/gasket)
DME/S 4-19 DME 48 DME 60-150 DME 375-940
PP/EPDM 96655216 96655218 96655230 96655232
PP/FKM 96655217 96655219 96655231 96655233
63
Flowmeter Pump accessories
Flowmeter
The flowmeter works according to the floater principle.
Component Material
Measuring pipe PSU (polysulfone)
O-rings NBR (Perbunan® *)
Stop PP
Connections PVC
®
* Perbunan is a registered trademark of Bayer AG, Leverkusen.
Dimensions
Flow range for water
L Floater material Product number
[l/h] DN G
[mm]
96729305
10-100 DN 20 PP
(552-20)
96729306
25-250 DN 25 Stainless steel
(552-21)
96729307
40-400 DN 25 G 1 1/2 400 Stainless steel
(552-22)
96729308
63-630 DN 25 Stainless steel
(552-23)
96729309
100-1000 DN 25 Stainless steel
(552-24)
96729310
250-2500 DN 32 G2 408 Stainless steel
(552-25)
96729311
400-4000 DN 50 PP
(552-26)
96729312
630-6300 DN 50 G 3 3/4 432 PP
(552-27)
96729313
1000-10000 DN 50 Stainless steel
(552-28)
64
Water meter Pump accessories
Water meter
The in-line water meter with potential-free pulse signal
is suitable for use in flow-proportional dosing applica-
tions.
Qn 1.5 and Qn 2.5 meters are of the multi-jet, dry dial
type for cold water up to 30 °C or hot water up to 90 °C.
Qn 15 meters and up are of the helical vane type for
cold water up to 50 °C or hot water up to 120 °C.
Max. pressure: 16 bar.
If the water meter is to be connected directly to the
Gr5806p
pump pulse input, a control plug should be used.
Product number of control plug: 96440449.
Fig. 69 Water meter
Qn 1.5 to Qn 15 meters are threaded.
Qn 40 to Qn 150 meters are flanged.
Cable length: 3 m.
Dimensions
65
Cables and plugs Pump accessories
66
Cables and plugs Pump accessories
67
Further product Pump accessories
documentation
Catalogue
Literature
In this section you can access all the latest documents of a given
pump, such as
• data booklets
• installation and operating instructions
• service documentation, such as Service kit catalogue and
Service kit instructions
• quick guides
• product brochures, etc.
Service
68
Further product Pump accessories
documentation
Sizing 0 1
Replacement
CAD drawings
2-dimensional drawings:
• .dxf, wireframe drawings
• .dwg, wireframe drawings.
3-dimensional drawings:
• .dwg, wireframe drawings (without surfaces)
• .stp, solid drawings (with surfaces)
• .eprt, E-drawings.
69
70
71
Being responsible is our foundation
Thinking ahead makes it possible
Innovation is the essence
96700284 0907
Repl. 96700284 0707
GB
Subject to alterations.